Fields label
is it possible to change the prompt or label fo field in report as there is no such property in the fields palatte
Hi ,
This may help you.
Suppose if you have a Column name
Emp_Amount is there
like Text and label Amount
If you want the Label AMount to Display Color "RED" when the Emp_amount is <Negative>
and "Black" when the Emp_amount value is "Positive"
Do as Follows
AMOUNT ---Emp_amount
Click on the Amount(label) properties
At the General Layout there will be
Conditional Formatting
click on that
1) A liitle Dialog box will open
2) Click on New
3) It will open Format Exception window
4) Check the First Box
5) Keep "EMP_amount" is "Less than" "0"
6) at the Format window
7) Keep the Color you want
8) Apply and run the report
This may solve your problemn
If not Email me at [email protected]
null
Similar Messages
-
Merge field label of two fields in ALV report
Hi,
Greetings of the day !!
I have a requirement to create a ALV report and the alv report has three fields(say F1, F2, F3). Where F1 and F2 fall under same category and i need to have single field label for both these fields.
How can I merge the field label of the fields F1 and F2?
Pl. share your knowledge regarding this.
Thanking you.
Regards,
RaghuHi Jodeswara Rao,
I need to display a ALV report with fields F1, F2 and F3. But F1 and F2 should have same field Label.
Header 1
Header 3
F1
F2
F3 -
Hello
Is there a way to use the field label in the header of a ALV grid?
I am currently using a hard coded solution, and i know it's not good.
form buildfieldcat .
clear wa_fcat.
refresh it_fcat.
wa_fcat-col_pos = '1'.
wa_fcat-tabname = 'KNA1'.
wa_fcat-fieldname = 'KUNNR'. " I want to use the field label of this field in the header...
wa_fcat-seltext_l = 'Customer Number'. " ...To not use this line.
wa_fcat-outputlen = 15.
wa_fcat-key = 'X'.
wa_fcat-no_zero = 'X'.
I hope my query was clear. Thanks a lot!Hi,
If you want header columns from Dictionary field labels, instead of hardcoding, you can follow what fellow SDNs mentioned.
Here is the solution.
<li>define internal table like this.
TYPES:
BEGIN OF t_mard,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
matnr TYPE mard-matnr,
insme TYPE mard-insme,
einme TYPE mard-einme,
speme TYPE mard-speme,
END OF t_mard.
DATA:
w_mard TYPE t_mard.
DATA:
i_mard TYPE STANDARD TABLE OF t_mard.
<li>Buidl fieldcatalog internal table like below . It works
PERFORM build_fcat USING:
"Field Int Tab ref field ref table
'WERKS' 'I_MARD' 'WERKS' 'MARD',
'LGORT' 'I_MARD' 'LGORT' 'MARD',
'MATNR' 'I_MARD' 'MATNR' 'MARD',
'INSME' 'I_MARD' 'INSME' 'MARD',
'EINME' 'I_MARD' 'EINME' 'MARD',
'SPEME' 'I_MARD' 'SPEME' 'MARD'.
*& Form BUILD_FCAT
FORM build_fcat USING l_field l_tab ref_field ref_tab.
w_fieldcat-fieldname = l_field.
w_fieldcat-tabname = l_tab.
w_fieldcat-ref_fieldname = ref_field.
w_fieldcat-ref_tabname = ref_tab.
* w_fieldcat-seltext_m = l_text.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " BUILD_FCAT
<li> You can check program [here|http://hr-abap-freeeducation.blogspot.com/2008/04/alv-list-display_17.html]
I hope that it solves your problem.
Thanks
Venkat.O -
Order value fields by field label in the profitability analysis document
Hello,
I am displaying a profitability analysis document and I want to order the value fields by their technical name (VV001, VV002, VV003...) instead of in alphabetical order (the system orders them by the field label).
Is it possible?
Thank you very much
BeaHello,
Check in KE4M whether sd condition type FKLMG is mapped corresponding value field in COPA.As you are getting the value for other company codes, this setting should be there.
You can also try checking simulation of billing document transfer through KE4ST. Check the details analysis
thanks
Hari -
I am creating a very straight forward fillable form and want to add a description of each field that can be visible to the user, but goes away when the person enters the appropriate data in the field. I have tried to suggested custom scripts. The script command were: if (!event.value) event.value = event.target.name; and
if (!event.value) {event.value = event.target.name; event.target.display = display.noPrint;} else {event.target.display = display.visible;}. Both allow the lables to be visible but neither allow the user to either replace the label with the relevant information and if it does, then the replacing data does not print/remain viewable.
I am confident this is doable as I have seen forms that say something like "add your name here" and when you enter the data that field label is replaced with the information I enter.Hi George,
I have tried this. What I get is a field label, and I can type into the field, but the label does not go away and the page prints blank. Should I try: if (!event.value) {event.value = event.target.name; event.target.display = display.Print;} else {event.target.display = display.visible;}, removing the .noPrint?
You have no idea how frustrating it is to try this and have such a simple function not work. Is there anothe script I can try? -
How to pass the text from a table to the field label on the selection scre
hi guru's
i have requirement were in i have to pass the text from a table as field label for
a input field on the selection screen.
EX: selection screen
(xxxxxxx ) __________
field label
please help
regards,
varahi all,
can you please check the code, and suggest am i doing wrong any were.
types: xtab(200).
data : ttab type table of xtab,
w_so type xtab.
data: routine(32) value 'TEMP_ROUTINE',
program(8),
message(128),
line type i.
AT SELECTION-SCREEN OUTPUT.
select field text DATA_ELEMENT from zauthgrptxt into table t_fieldlabel where STARALLOWED EQ c_asteriks.
DESCRIBE TABLE t_fieldlabel LINES N.
w_so = 'REPORT ZTEMP_PROGRAM.'.
append w_so to ttab.
w_so = 'FORM TEMP_ROUTINE.'.
append w_so to ttab.
loop at t_fieldlabel.
w_field = t_fieldlabel-field.
CONCATENATE 'SELECT-OPTIONS: ' ' P_' w_field zspace ' FOR ' ' T_FIELDLABEL-' w_field ' NO INTERVALS NO-EXTENTION.' INTO w_so.
append w_so to ttab.
endloop.
w_so = 'ENDFORM.'.
append w_so to ttab.
generate subroutine pool ttab name program
message message
line line.
if sy-subrc = 0.
perform (routine) in program (program).
else.
write:/ Message.
endif.
The sy-subrc = 4. nothing is coming into 'program' at generate subroutine pool
very urgent requirement please help
thanks,
vara -
Include Field Labels in GUI_Download
How do I include field labels in GUI_DOWNLOAD (I am using it to download an Excel file from an internal table)? I see a table called fieldnames but when I add fields to that table they system only shows the first field. How can I show a label for each row, in Excel?
See the code below:
wa_fade_fields-posid = 'Project#'.
wa_fade_fields-poski = 'Phase Code'.
wa_fade_fields-usr02 = 'WBS Element'.
wa_fade_fields-txt04 = 'Status'.
wa_fade_fields-sakto = 'Cost Elem'.
wa_fade_fields-vrsen = 'Vsn'.
wa_fade_fields-wrttp = 'VT'.
wa_fade_fields-planned_hours = 'Planned Hours'.
wa_fade_fields-arbei = 'Current Hours'.
wa_fade_fields-ismnw = 'JTD Hours'.
wa_fade_fields-etc = 'Estimate to Complete'.
wa_fade_fields-variance = 'Variance'.
wa_fade_fields-percent = 'Percent'.
INSERT wa_fade_fields INTO TABLE it_fade_fields.
*Fade table
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = d_fullpath
* FILETYPE = 'ASC'
* APPEND = ' '
write_field_separator = 'X'
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
dat_mode = 'X'
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
* SHOW_TRANSFER_STATUS = ABAP_TRUE
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_fade
fieldnames = it_fade_fields
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
Regards,
DavisI think the problem might be with the WORK AREA structure, the work area which contains the description should be atleast 50 characters long so that it can accomodate all the characters...
Declare it something like this
DATA: BEGIN OF excel_schedule OCCURS 0,
refno(50),
ebelp(50),
etenr(50),
eindt(50),
menge(50),
ameng(50),
END OF excel_schedule.
Ok there is another simple way of doing this
Use GUI_DOWNLOAD twice and the second time you just append it to the existing first file...
SAmple code
DATA: BEGIN OF excel_schedule OCCURS 0,
refno(50),
ebelp(50),
etenr(50),
eindt(50),
menge(50),
ameng(50),
END OF excel_schedule.
* Download to Workstation the Description Fields of error schedule file
CALL FUNCTION 'GUI_DOWNLOAD'"
EXPORTING
filename = w_lstring
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = excel_schedule
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Download to Workstation the error schedule file
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = w_lstring
filetype = 'ASC'
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = t1_eschedule
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
use the append property of GUI_DOWNLOAD the second time -
Rename the Field Label in the sales order application.
Hi,
Please suggest me how to rename one of the field name in the sales order application.
I have add a new field called YOUR_REF_SHIP and simultaneously have to rename it from your reference to Carrier Account No. this field is available in the filed group SLO_DETAILS_GENERAL1.
This field is located in the General data tab of the sales order application.
I have created the Text Key in the Define Interface Texts and used the same text key in the Rename Field Label, but it is not working.
and i dont want to change it with the CMOD transaction.
Please suggest me where i have went wrong.
Thanks.
AnilkumarHello Anil,
The field groups are to be regenerated.
However, I have done a similar thing and in the past, the layout generation helped me. In the recent example, the name is not reflected as per the interface text.
Let me know if you find anything on this.
Regards
Priyanka -
Field labels that won't go away in Address Book
Help!
Many of my contacts have credentials at the end of their names, so I use the Suffix feature to keep track of them. However, for people without credentials at the end of their names, the word "SUFFIX" appears in gray on their contact card, and I can't make it go away.
Same thing with other unused fields on any given card, such as prefix. It is pretty annoying to have "Prefix Bob Jones Suffix" on a contact card.
How do I make these field labels disappear without eliminating the field?
Thanks for your help.
PPC Mini Mac OS X (10.4.9)Welcome to the discussions, Cobra.
Are you leaving the cards in edit mode? Those fields don't show up, if empty, unless you are in edit mode.
AK -
Changing Field Labels of module pool screen dynamically
Hi All,
Can anybody tell me how to change field label of text field in dialog screen dynamically.
The Screen/Transaction is standard one.
I have created a Enhancement point for this change in one of PBO module's subroutine for this screen.
This Field label is defined as a 'Text' field only. We can't change it any more as it is standard one.
Can anybody tell me the solution for the same.
I have to change this label value as per some validations and its corresponding text field value will remain as is.
Thanks,
Deep.Hello,
I think it is not possible, but try changing the name by Looping on screen table on PBO,
Bye
Gabriel -
XML Output - Issue with multiple field labels.
Dear Users,
I am trying to create an XML sheet as output for my program, and am struck at a point where I don't need field labels appearing on the XML output.
The code looks as below:
l_element_order = l_document->create_simple_element(
name = 'Order'
parent = l_element_ordertype ).
l_value = it_order-aufnr.
l_rc = l_element_order->set_attribute( name = 'AUFNR' value = l_value ).
On my output though, both the field labels 'Order' and 'AUFNR' appear side by side. I would ideally only want the 'Order' label to appear.
Is there a method through which I can suppress the labels?!
I am using the following classes as a part of the code:
DATA: l_ostream TYPE REF TO if_ixml_ostream,
l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document,
l_value TYPE string.
Would be much appreciated if someone could help me with this please. Thanks!
VijayHi,
recipent list is filled once,there are no loops in the program, and the SOST shows two same items with some have same time stamp and some have difference of a second.
Regards
Govind -
Use of alternative field label in TMW
Hi,
I'm using a customer-specific field under
IMG>Time Management>Time Manager's Workplace
>Screen Areas>Time Data>Define Table for Time Events
and I want to change the field description displayed in TMW under the Time Events tab.
I've tried to use the alternative field label, but it doesn't work. Am I missing a step? Does anyone have any idea how to configure this?
Thanks
AlThat doesn't really help me though...I understand that it's sap standard, but why then give an option for an alternative field label if it doesn't work. Or am I not understanding that functionality?
-
What is Field Label ? and where do we use it .
What is Field Label ? and where do we use it .
Hi,
You can assign text information to a data element with the field labels.
The field labels are used to display a screen field. You can copy structure components and table fields from the ABAP Dictionary to the input template when you define a screen in the Screen Painter (Get from Dict. function). You can also assign a field a field label that is derived from the data element of the field.
The text of the field label can be translated centrally with the translation tools. The text is then displayed in the input template in the users logon language.
Short, Medium and Long Field Labels
Keywords of different lengths for identifying screen fields. Since the space available for such texts depends on the input template, you can define the text information in three different lengths.
A maximum length must be assigned for each field label. It is the upper limit for the lengths of all translations of the given text. The maximum length of the field label therefore should be somewhat longer than the given text in the original language.
Headers
This text is used as a column header when you output the contents of fields as a list in the Data Browser. It can also be assigned to a field in the Screen Painter.
A maximum length must also be assigned for the header. It is the upper limit for the lengths of all translations of the header. Choose the maximum length of the header to be somewhat longer than the given text in the original language. Also note that the header is often displayed above the corresponding column when preparing list output. The length of the header therefore should not exceed the length of the data element.
Short Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Medium Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Long Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Heading
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Thanks,
Reward If Helpful. -
Table that stores field label, language wise
Hi,
Is there any table that stores the field label of a data element, language wise ?
For example, the field 'kunnr' has label as 'Customer' in EN
and 'Client' in FR .
I need to know this FR label where i am given only the field and language .
How to know ?
( In SE16 i get these field names language specific, I need the same info, where it is fetched )
Answers will be suitably rewarded !
Thanks,
Livelytry this sample code it may help you
DATA : V_REPTEXT TYPE REPTEXT,
V_SCRTEXT_S TYPE SCRTEXT_S,
V_SCRTEXT_M TYPE SCRTEXT_M,
V_SCRTEXT_L TYPE SCRTEXT_L.
DATA : LANG TYPE DDLANGUAGE.
LANG = 'FR'.
CALL FUNCTION 'WCGW_DATA_ELEMENT_TEXT_GET'
EXPORTING
I_DATA_ELEMENT = 'KUNNR'
I_LANGUAGE = LANG
IMPORTING
E_REPTEXT = V_REPTEXT
E_SCRTEXT_S = V_SCRTEXT_S
E_SCRTEXT_M = V_SCRTEXT_M
E_SCRTEXT_L = V_SCRTEXT_L
EXCEPTIONS
ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE : / V_REPTEXT.
WRITE : / V_SCRTEXT_S.
WRITE : / V_SCRTEXT_M.
WRITE : / V_SCRTEXT_L.
regards
shiba dutta -
Function Modul for read field label
hi all
i search a function modul for read the field label from data element.
Example for data element matnr, i must have field label text material.
Thx abap_beginHi,
If you give input parameters type, field and table you get data element using
RP_PRINT_GET_DATA_ELEMENT
Try also
KL_TABLE_INFO_GET
But not sure if this futfill your requirement... -
Changing Address Field labels in PM module.
Hi all,
We have an urgent requirement where we need to change the field labels of address subscreen.
These changes should reflect only in IE01, IE02 and IE03 transactions restricted to only one particular equipment type.
Example: <i>Field label ( Name2 )</i> changed to <i>Field label ( Manufactured By )</i>
Points will be rewarded to all useful suggestions.
Thanks,
Bhanu.Hi all,
We have an urgent requirement where we need to change the field labels of address subscreen.
These changes should reflect only in IE01, IE02 and IE03 transactions restricted to only one particular equipment type.
Example: <i>Field label ( Name2 )</i> changed to <i>Field label ( Manufactured By )</i>
Points will be rewarded to all useful suggestions.
Thanks,
Bhanu.
Maybe you are looking for
-
HT4906 How can I subscribe to a shared Photo Stream in iPhoto
I'm trying to use iPhoto to subscribe to a shared Photo Stream from my sister-in-law. Whenever I click on the invitation, it says I need to sign in to iCloud -- which I have multiple times now -- and be running iPhoto 9.4 (which is actually 9.4.2).
-
Display PDF stored in database
A page has a region of type âPL/SQL Procedure (anonymous block)â and the following region source: BEGIN get_image(3660); END; The code for the Get_Image procedure is shown below. This procedure extracts PDF images from a BLOB column in the databa
-
Can't modify address2, province and country
I tried to modify my user profile. Some columns keep recalling old data or reset to default values when next logon. Those columns are "address2" in company address, "state/province" and "country" in shipping address. For address2, it keeps recalling
-
Hi, There is a field called BWVORG (SAP-BW Transaction Key) in the data sources for Inventory namely 2LIS_03_BF and 2LIS_03_UM which gets mapped to 0PROCESSKEY in BW. I want to know in which transaction of R/3 I will be able to see all those availabl
-
My date and time is wrong. The app won't open for me to change it
I Changed the date on my MacBook Pro and them tried reopen the date and time app and it won't open.