Fields missing after enhance datasource

Hi again experts!
I've a new problem today... is related with an append structure. I created an append structure for the 0article_attr datasource, then I activated it but now I can't see the new fields in the rsa6. I read in this forums some threads and I also verify two things: the new fields appears in rsa2 and NOT appear in the table ROOSFIELD.
Please, I need urgent help!
Federico

Hello federico,
What was your source system and system status ? plugin etc ?
On a SRM system, we have the same problem, execpt that the fields is well mentioned in ROOSFIELD but we also cannot see them in RSA6.
Regards,
Lionel

Similar Messages

  • Fields missing from webservice datasource in SSRS

    We are using a XML webservice as a datasource for SSRS. The webservice is returning  the hierarchy of departments of our company.
    The data is consumed by SSRS but some fields are missing.
    This is (simplified) what is returned by the webservice:
    <department>
      <nr>1</nr>
      <name>name1/name>
    </department>
    <department>
      <nr>2</nr>
      <name>name2/name>
      <parentdepartment>1</parentdepartment>
    </department>
    etc
    The field parentdepartment is missing from the fieldlist, even if I add it by hand it will be empty.
    At this forum I found that fields are even skipped when the first item has an empty value for a certain field so the absence of a field in the first item must certainly be the
    problem. Nr 1 has no parentdepartment field.
    Is there a way around this like skipping the first department, we don't need it, or forcing the SSRS-datasource to add the parentdepartment field.
    As it is used by many applications we prefer not to change the webservice to skip the first or add dummy values to the first item.

    Typically if the field doesn't show up the CR can't figure out what type it is which means when we query the DB for the field type the client/server returns the wrong type or some type that CR doesn't support.
    How is the field defined on the server?
    Thank you
    Don

  • Fields Missing after Mapping

    Hi All,
          I am doing Flat file to Flat file Scenario.I am doing content conversion on both the sender and receiver side.I have twenty eight fileds on sender side and twenty eight fields on receiver side.When the Flat file is being picked up it is converting into XML and all the fields are clearly shown in SXMB_MONI.I have mapped every field during mapping.But when i check the payload in RWB in message monitoring the XML message which we can see after mapping in some records only 24 fields are being shown while in some records all 28 fields are being shown.When I check the same in test tab in message mapping it is working fine.Please help in this regard ASAP.
    Thanks in Advance
    Dinakar

    Sounds to me like you have some conditional mappings that are falling out and not returning values.  If all your field mappings are one-to-one without conditions then the problem must be within the data itself.  We've seen where certain XML control characters can mess up mappings (& and $ for example).
    I don't suppose you are using an XSL mapping that you can post here for us to check out???
    Chad

  • SRM 0BBP_TD_SC_1 customer fields empty after enhancement

    Hi experts,
    we are working with SAP SRM 7.0, BI 7.0
    We need to populate several customer fields defined in the table BBP_PDISC, into the 0BBP_TD_SC_1 datasource.
    We have created an append structure that contains the required fields. The fields are not hidden in the datasource. Although some records with data exist in our system, the fields are empty when executing the datasource in RSA3 transaction.
    How can I check why they are not being populated? Any ideas?
    Thanks in advance.
    Regards,
    I

    I do not see the table you mentioned in the datasource details link below, which means the datasource do not extract any fields from BBP_PDISC. You would need to write code in CMOD to fill the field, eventhough it is a std field. If the field is available in any of the tables on which the extractor is built, then we can add new fields from those tables and extract data with out writing code in CMOD.
    http://help.sap.com/saphelp_bw33/helpdata/en/db/140b56a2322a4b8916cf154325f6a1/content.htm
    May be the fields added in other cases (PO & contracts ) you mentioned might be from tables on which those datasources are built.
    Edited by: Murali Krishna K on Jan 31, 2012 3:15 PM

  • Fields Missing After Upgrading the Project in peoplesoft

    I had transferred a project from Qa to prod. User is not able to see some of the fields on prod, while on Qa everything is working fine. I have even compared the project it is same on both env. Onr thig is there that it contains app engine but i dont see section folder in upgrade tab. please suggest what could be the reason.

    To insert all the Sections, Peoplecode  and record structure in App Designer, go to Insert > Definition into Project (Cntl + F7) then next to definition type select Application Engine, enter your app engine name, to the right under related definitions select all the options. and then click on insert, so that all the objects will be added to the project.
    once you migrate the project make sure you alter the records so that new fields will be built to the database.

  • Segment field missing after posting PSCD document

    Hi all,
    I can enter segment in PSCD document posting (tcode FPE1) but when I display the document, the segment disappear.
    What would be the reason for this?
    Giang

    Giang,
    You have to go to the SAP marketplace at http://service.sap.com/notes, and look for the note 1030497.
    Regards
    César

  • Issue while modifying entries in custom infotype after enhancement.

    Hi All ,
    I have enhanced custom Infotype (Added 2 new fields).
    After enhancement, I am facing one issue while updating infotype through FM HR_INFOTYPE_OPERATION.
    Issue is that I am not able to update/modify records through FM HR_INFOTYPE_OPERATION.
    RETURN parameter of FM comes empty indicating no errors but actual records in database table are not updated. I debugged FM and found that SAVE button on PA30 screen is disabled.
    Anyone knows reason for above proble and also please help me in solving issue.
    Regards,
    Jigar Thakkar.

    Thanks for your response.
    Yes i am able to update IT9201 through PA30 but not with FM HR_INFOTYPE_OPERATION. Also I have activated PXXXX structure through PM01.
    While debugging FM HR_INFOTYPE_OPERATION i saw that SAVE button is disabled and processing stops there.
    Regards,
    Jigar.

  • Enhanced Datasource fields not getting displayed in Transformation

    Hi,
         Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
      Eg I have done mapping of 6 fields in transformation from datasource to DSO
    Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
    I am deleting the existing transformation.Is this the only solution?
    Kindly suggest your answers.
    Thanks,
    Sonu.

    HI,
    Deleting is not solution as it is common scnerio.
    Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
    Thanks
    Ajeet

  • After enhancing 2LIS_03_UM (Revaluations) do we have to run Initialization for 2LIS_03_BX & 2LIS_03_BF also??? is there any dependency among these 3 Datasources.

    Dear SAP BI/BW Gurus & Masters,
    I have a urgent requirement to Enhance the data source/Extractor of 2LIS_03_UM (Revaluations), with 1 field. This is OK... I will do enhancement!
    Here is the Next problem... After enhancing this UM, do we need to perform INIT Run (initialization for source system) for 2LIS_03_BX & 2LIS_03_BF along with 2LIS_03_UM? Or Only this enhanced 2LIS_03_UM INIT run will do for next deltas?
    Because I think there is a inter dependency within these 3 data sources. change of 1 among this 3 will affect others. Correct me if I wrong.
    Kindly explain me following, if there is a dependency.
    Case 1: what & how to proceed, if I want historical data for newly enhanced field.
    Case 2: how if do not want historical data for newly enhanced field.
    Kindly help me, do not hesitate to ask clarification or to make a statement.
    Thanks,
    Anjith Reddy.

    Dear SAP Gurus & Masters
    I have a requirement to Enhance the data source/Extractor of 2LIS_03_UM (Revaluations), with 1 field. This is OK... I will do enhancement!
    Here is the Next problem... After enhancing this UM, do we need to perform INIT Run (initialization for source system) for 2LIS_03_BX & 2LIS_03_BF along with 2LIS_03_UM? Or Only this enhanced 2LIS_03_UM INIT run will do for next deltas?
    Because I think there is a inter dependency within these 3 data sources. Correct me if I wrong.
    Kindly explain me following, if there is a dependency.
    Case 1: what & how to proceed, if I want historical data for newly enhanced field.
    Case 2: how if do not want historical data for newly enhanced field.
    Kindly do not hesitate to ask clarification or to make a statement.
    Thanks,
    Anjith Reddy.

  • Field population after ds enhancement.

    Dear gurus,
      I enhanced sales data source by adding 3 fields from  database tables of different application component.
    I write the code to populate the fields by using enhancement rsap0001.
    Every thing is fine from r3 side
    in the bw system previously i have data in my cube
    how can i add fields and populate the fields in the cube if
    the cube has already data in it.
    i want to populate the fields with the previous values also
    how can i achieve this.
    thanks
    andy

    Hi,
    Remodeling is one of the good feature in BI.
    This helps in remodeling your Infoprovider, when its filled with data.
    You can add characteristics and key figures in BW 3.5 without deleting data in the infocube, but you can't remove them without deleting all data first.
    Deleting data is also needed when you change dimensions.
    If you dont need any history data you can just add the keyfigure in Edit Mode.The corrresponding update rules may get deactivated and you may have to reactivate them again.
    /people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
    http://help.sap.com/saphelp_nw70/helpdata/en/d0/46144236bcda2ce10000000a1550b0/frameset.htm
    /thread/782986
    Remodeling Tool in BI 7.0
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/06/28/remodelingToolinBI7.0
    Library-Remodeling InfoProviders
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
    Adding Key figure to existing cube
    Remodeling InfoProviders 
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
    Hope this helps.
    Thanks,
    JituK

  • Fields Missing in datasource

    Hi friends,
              Please help, I have some fields missing in my data source , but they are available in the extract structure of that data source..what do I do now, to see the same fields in my data source also?? should I ahve to append the data source??
    thanks alot in advance,

    Hi
    I think you didn't appended the fields to the append structure.
    Try to append the fields in the append structure and save ands activate it. and again activate the extract structure.
    then you can see in RSA6
    Hope this helps
    shiva

  • Fields missing in LBWE

    Hi folks,
    We got a an issue with the fields of standard LO DataSources.
    When i have checked the LO SD datasources in LBWE maintanance, few fields are not existing in our Production system which are available in DEV server.
    But i can see the total number of fields in the datasource are equal in all the servers i.e DEV as well as PROD servers.(I have checked in the RSO2 --> Extract structure of the standard Datasoources).
    We are having the mappings for the fileds that are not seen in the LBWE on the BI side.
    Please suggest me whether i can proceed further with this existing datasources or do i need to adjust the extract structure maintanance of PROD server in LBWE as per DEV server.
    We are going live in few more days and came across this now after the transports to PROD,
    Do we get any issues in the data loads with this differences in structure or can we neglect it?
    Please give me your valuable inputs....
    Thanks in advance...
    Kumuda

    Hi Kumuda,
    It is this way,
    The Production and the Dev  have to be in SYNC always PLUS the New Fields addition has to reflect.
    1)First Check for the SYNC in RSA6 of Production and Development ,i.e RSA6>SAP-R3>SD-->Then Respective  datasource.
    They have to be in SYNC ,if not then that means some developemtn have been done to the Datasource by appending the Structure as part of Requiremnt.If the Structure has been enhanced then after repliaction of DS in BI-Dev the New fields will be avaliable in R3 and  BI Dev only and not in BI or R3 Produciton, as they have not been transported.
    If u have done any dvelopments to this DS,then the Prod and Dev have to match.
    Come back with more clarity as to what is the excat siituation so that accordinly we can suggest what to do !!!!
    Rgds
    SVU123

  • CRM_BWA_MFLOW - Enhance datasource 0BPARTNER_ATTR - Business Partner data

    Hi Gurus,
    I tried to enhance datasource for Business partner master data 0BPARTNER_ATTR in a SAP CRM System (rel. 4.0).
    I used BADI CRM_BWA_MFLOW as a definitions and followed the How-to paper “How to enhance CRM content DataSource” – the interface seams to be ok – it is activated.
    BUT it seams not to work.
    I checked it via RSA3 – Extraction checker in debug mode but I’m not able to jump in my code.
    I guess, I miss one step in the implementation?
    Can anyone help me - this would be great.
    Best regards
    Grit

    As far as I can understand, it seem that you did not include it into the CMOD transaction.
    In order to do this, you need to do the following:
    1 create and henancement into the structure of the 0BPARTNER_ATTR with you additional field, go into transaction CMOD
    2 Select the project for BW, if you don't have one, just create it. (You need to include it into the data packet for BW, if you don't have you must create it otherwise you'll get the data packet tmp and you cannot transport it)and select the Henancement Assignment RSAP0001.
    3 In the components area you'll get 4 functional exit:
    EXIT_SAPLRSAP_001
    EXIT_SAPLRSAP_002
    EXIT_SAPLRSAP_003
    EXIT_SAPLRSAP_004
    click on the first exit and than click on INCLUDE ZXRSAU01
    in this include you go in the change mode and input this king of code:
    WHEN '0BPARTNER_ATTR'.
    PERFORM and input you code. 
    Rgs
    Antonino

  • How can I know the delta field for CO-PA datasource?

    Hi,folks:
        How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
        Full points will be given to u.
    Martin Xie

    Dear Martin,
    The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
    See this link...
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
    Also check ROOSOURCE in R3, asmentioned by Dinesh.
    Hope it helps.

  • How to print company logo in Excel/ PDF after Enhancement Pack 1?

    Hi all,
    I realise this topic has come up time and time again but apparently this functionality has changed after Enhancement Pack 1 for BW....?
    My problem is simple.  I have a series of reports on our portal, formatted using the WAD, and there is a company logo on the reports.  When exporting to PDF or excel, the logo disappears.
    The SAP documentation states that the addition of the logo when exporting was not available previously, but it was planned, and seemed to imply that this would be possible in EHP1.
    We have just applied EHP1 to our test system however I cannot find how to switch on this functionality or how to get the logo onto the exported reports.  I can't find any documentation on how to do this.
    Is anyone else using this after applying EHP1?  Is anyone from SAP reading who can tell me where this functionality is??
    Thanks!
    Mischa

    Thanks but this doesn't work.  It works exactly as it did before the Enhancement Pack and doesn't automatically display the image.
    So I guess I am missing something - my image is a bmp. file, will this work or should I save it as something else?
    Are there any settings in the WAD (either in the Web Template itself or on the button to export) which I need to change to be able to display this logo?
    Or are there any settings I need to make in the backend of BW after the application of the Enhancement Pack?
    Any more ideas please?
    Thanks
    Mischa

Maybe you are looking for