Fields missing in LBWE

Hi folks,
We got a an issue with the fields of standard LO DataSources.
When i have checked the LO SD datasources in LBWE maintanance, few fields are not existing in our Production system which are available in DEV server.
But i can see the total number of fields in the datasource are equal in all the servers i.e DEV as well as PROD servers.(I have checked in the RSO2 --> Extract structure of the standard Datasoources).
We are having the mappings for the fileds that are not seen in the LBWE on the BI side.
Please suggest me whether i can proceed further with this existing datasources or do i need to adjust the extract structure maintanance of PROD server in LBWE as per DEV server.
We are going live in few more days and came across this now after the transports to PROD,
Do we get any issues in the data loads with this differences in structure or can we neglect it?
Please give me your valuable inputs....
Thanks in advance...
Kumuda

Hi Kumuda,
It is this way,
The Production and the Dev have to be in SYNC always PLUS the New Fields addition has to reflect.
1)First Check for the SYNC in RSA6 of Production and Development ,i.e RSA6>SAP-R3>SD-->Then Respective datasource.
They have to be in SYNC ,if not then that means some developemtn have been done to the Datasource by appending the Structure as part of Requiremnt.If the Structure has been enhanced then after repliaction of DS in BI-Dev the New fields will be avaliable in R3 and BI Dev only and not in BI or R3 Produciton, as they have not been transported.
If u have done any dvelopments to this DS,then the Prod and Dev have to match.
Come back with more clarity as to what is the excat siituation so that accordinly we can suggest what to do !!!!
Rgds
SVU123

Similar Messages

Fields missing in Infoset.

I have an infoset that contains 3 master data objects. Some of the attribute fields do not show up in the infoset. Does anyone know why some fields show up and other do not?
Thank you
Aaron

Hi Oscar,
The field missing is not set to attribute only. I checked other fields that do show up in the infoset and they are not marked as attribute only. Any other ideas?
Thanks
Aaron

FIELDS MISSING

Hi,
When i replicated CO-PA data into BI. It created two DS's:
0COPA_RCTY AND 1_CO_PA_XXXXXXX
I created an Infosource and transfer rules for 1_CO_PA_XXXXXXX but there are a few fields missing that i do see in the operating concern such as:
ARTNR=0MATERIAL
KNDNR=0CUSTOMER
BZIRK=0SALES_DIST
Why are these fields not in the Infosource since they are in the operating concern?
Where would they be?
Thanks

Delete the data source and then need to re-create using KEB2 transaction. While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source.
(you can also try, goto KE24 and edit the dataaource and add your fields not 100% sure of it works)
how to select fields refer doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6

Fields missing on FB60

Hi,
I have a couple of questions.
1. I see there are a few fields missing on the line item level on FB60. It's not the case for development or testing environment. But in Production it's happening. Does anyone know how to get these fields back?
2. Is there a transaction where I can clear multiple documents at once instead of one like FBRA?
Thanks

Hi!
Field is missing in FB60 screen, please brief which field you are missing and whether its comes earlier, if so please check is there any variant create, u can see this variant at end of the line item screen in top position. when u put your cursor there it will show u the configuration, click there and see if any variant is used, if so remove that and put tick on use as standard setting and try.
FBRA is not for clearing the document, but it reset or reset and reverse the clear document.
for clearing of vendor tcode is f-44
for clearing of g/l tcode is f-03
for clearing of customer tcode is f-32
Rakesh

Fields Missing in datasource

Hi friends,
Please help, I have some fields missing in my data source , but they are available in the extract structure of that data source..what do I do now, to see the same fields in my data source also?? should I ahve to append the data source??
thanks alot in advance,

Hi
I think you didn't appended the fields to the append structure.
Try to append the fields in the append structure and save ands activate it. and again activate the extract structure.
then you can see in RSA6
Hope this helps
shiva

Crystal Report VS2005 - Table fields missing in Database Expert

Hi,
I am having a problem with the Crystal Report comes with Visual Studio 2005. I am trying to develop a customized report for SAP Business One. When I try to add two tables using the Database Expert, there are certain fields missing in the LINK page. This is a big problem for me because I need to link that field with another table. Oddly, it doesn't seems that there are anything wrongs with the missing fields. If I click OK and check at the Field Explorer, the missing fields are there!!!
In other words, it is missing only at the Database Expert --> Link Tab. Anyone having the same problem? Is this a known issue or any patch that I can apply to resolve this issue?
Thanks in advance for your help.
Regards,
Harianto

Try this link to resolve your issue:
Full Outer Join option for SQL Query and BW Query grayed out
Thank you
Don

Some fields missing from the Information interface

On iTunes 12 I can’t find the "Description" field that was in the Video page.
The field still shows in the list of songs, but it doesn’t appear on the new "Information" interface. And I don't think this is the only field missing compared to the previous Information interface. Can anyone help? Thank you.

... before you click Get Info.
tt2
YES!
Thank you turing! That really helped.
(it seems a bit of a complication to me, the system was just fine as it was, but what do I know?)

Issue for Production Price list field missing

Hello all,
I have a strange issue with a field missing in the issue for production window. When an issue for production is created, the Price list field is missing. Please see the attached screenshot. Does anyone know how to show this field? I have checked form settings and it's not an option there.

Hi Chris
Following is the SAP Note No: 1720071
Symptom
When opening "Issue for Production" from "Production Order", "Price List" field is missing.
Reproducing the issue
1. Login to SAP Business One.
2. Go to Production->Production Orders, open a "released" production order document.
3. Right-click a row whose "issue method" is "Manual", and choose "Issue Components". (If all the rows have "Backflush", you need to change one of them.)
4. "Price List" field is missing on the left top of the new screen.
5. If you click "Attachments" tab, the field will be showing correctly.
Solution
Current workaround is to click "Attachments" tab to make "Price List" showing.
The issue is planned to be fixed in SAP Business One 9.0.
With Regards
Balaji

Storage location field missing while doing GR with PO number

When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
I tried other way to receive goods , but storage location disappears when I save it.
MMBE shows stock as on order before reciept , after I post goods, material document created but stock disappears. Not even in the plant.
Can anyone help , please?

<i>The following from other message thread solved my problem....</i>
Stephen Birchall
Posts: 1,095
Questions: 1
Registered: 3/27/07
Forum points: 1,566
   Re: Material Classifications and Purchasing cycle
Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post
Hi,
You create the material in MM01 and select the non-valuated stock material type.
When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
Steve B

Keep appointments field missing!

hello
I am having trouble with my pearl and I need some help.
i realized that , during sync, the device deleted all entries prior to 60 days, which as you can imagine, affected outlook as well.
when i looked under calendar options so to adjust how long i want it to keep the entries, I realized that there is no such field in my hand held! No such option!
is there anyway to resolve this?
by the way I m using desktop manager 4.2.0.14 in case this information is needed...
can someone help please?
thank you in advance

Hi Shankar,
You may check the following points to know cause.
01. Get the message text by using message category and message number.
Message text would be "%1 field missing"
SQL> select message_text from ci_msg_l where message_nbr='253' and message_cat_nbr='25';
MESSAGE_TEXT
+%1 field missing+
why the framework not populating the field name? might be bug?
02. Compare the user group between these users.
03. Do the same steps in debug mode for these users, and check the log entry. You will get some points.

CMR-Field missing

None of my container managed relationships get added to the descriptors in
the ejb-jar.xml file just wondering if anyone has a solution.
thanks
Glenn

Hi Shankar,
You may check the following points to know cause.
01. Get the message text by using message category and message number.
Message text would be "%1 field missing"
SQL> select message_text from ci_msg_l where message_nbr='253' and message_cat_nbr='25';
MESSAGE_TEXT
+%1 field missing+
why the framework not populating the field name? might be bug?
02. Compare the user group between these users.
03. Do the same steps in debug mode for these users, and check the log entry. You will get some points.

Fields Missing In Maintenance TAB of LBWE

Hi Friends,
               I have appended the data source 2lis_02_scl , I see my fields in the data source in rsa6, but in LBWE, in the maintenance TAB, when I try to pull my fields from Right to Left , I dont see my fields on Right hand side, Please clarify this, and also my question is do I have to write my CMOD and then pull the fields on Maintenance TAB??
Thanks and Early response will be appreciated.

You cannot see the enhanced/appended zfiled in LBWE. You have to write code to ppopulate data to that filed.
Follow the below steps:
1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.
Enhancements:
BW Side:
Go to CMOD.
1.     To create new projectgive the project name create give Description  Save
2.     Select the radio button Enhancement Assignment and give the Enhancement name you want and press Enter.
3.     If the Enhancement is already assigned to some other project it will display the same message saying it is already assigned it some other project.
4.     If the Enhancement is not assigned to any project Click on save.
5.     Give RSR00001 (For Variable Exits)
6.     Activate the Project.
7.     Now go to Display  and click on the components button.
8.     Now Double click on EXIT_SAPLRRS0_001. In that you can see an include ZXRSRU01.
9.     Double click on that include, it will say program name ZX are reserved for includes of exit Functions groups.
10.     Just Press Enter.
11.     Itll Pop-Up a window saying Include ZX. Does not exits  Create Object.
12.     That is where you have to write the code for the variable exits.
13.     RSR00002  BW: Virtual Chars and Key Figures.
14.     RSR00003  BW: Moving Characteristics.
R/3 Side:
Follow the above steps and the enhancement will be RSAP0001:
1.     ZXRSAU01  Transaction Data
2.     ZXRSAU02  Master Data (ATTR).
3.     ZXRSAU03  Master Data (TEXT).
4.     ZXRSAU04  Hierarchies.
Also check the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also please see these threads
Enhancements
Re: enhancements
Good Luck

Regarding Field Missing in Dso Transformation

Hi
Folks
I am facing the issue like
In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object 0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
so How can i get the field in DSO to Cube transformation.??
any settings have to be change???
waiting for yours Valuable answers
Regards
Anand

Hi,
Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
Regards,
Srinivas

Tax code field missing in F-63

Hi All,
I am working on a issue where we are not getting tax code field on F-63 screen after providing posting key 31 and Vendor Account.
I have looked at filed status group assigned to the Vendor Recon account and Field status variant assigned to Posting Key 31 but there is nothing to make tax code field as hidden/optional/required.
Can any one help me regarding this where some field is missing on one screen and that field is not present in Field status groups as well.
Thanks,
Amit

Dear Amit,
Please make your GL Account as Tax Relevant in FS00, it will show at the time of Booking entry..
Br,Vivek

Fields missing in Interactive forms in SFP

Hi All,
I am using interactive forms (transaction SFP) for Prsonnel change request in MSS.When i go to this form ISR_FORM_SPEG thru SFP, i realised that come standard fileds like PERNR,ENAME etc are missing ( Generic ISR Table Type) are missing from the context folder of ISR_FORM_SPEG.Any idea how i can bring them back into place??
Regards,
Aditi

Hi Aditi,
Go to transaction QISRSCENARIO. check if these fields are there in the characteristics of the corresponding scenario (here SPEG). If they are there, click on the change button next to the form name in the Basic data of the scenario. A pop up message asking you to change the context fields as per the characteristics fields. This gets you to the ALCDesigner. Once the proper bindings are done for the form, exit and lets you go back to the qisrscenario transaction. save the data and also activate the form. <provided you are viewing the standard scenario in the change mode>.
else
copy this scenario and make the adjustments you need.
if there are some fields in the form that are not part of the characteristics, click on the import form fields button next to the form name. and save it.
Hope this will solve your problem.
do update the forum reg your findings.
Thanks and warm regards,
Anto.

Fields missing in LBWE

Similar Messages

Maybe you are looking for