Fields missing while creating the data source

Hi All
I am using a third party system to pull data in to BI...Actually there was one table where from the other end they had added 2 fields recently...when i checked in development i was able to create the data source for the table along with the new fields..but when i check it in production those newly added 2 fields are missing .. though i am able to see the old fields in the data source the newly added fields are missing..so is there any problem with the refreshment of the table or should we reastart the connection?
Can any one please let me know a solution for this...
Regards
Shilpa

HI,
Are you having connectivity like this
BI Dev
BI QA ---> All Three connected to same 3 rd party system
BI Prod
If yes, If it is R3 replicate datasource will help.
Incase of third party system you need to regenerate the datasource.
if it is DB Connect try to go to the source system and connect to database table from BI side and at the top you will have
generate datasource. use that option you will be able to solve.
Else
BI Dev - 3rd party dev
BI prod - 3rd party prod
Try to add 2 new fields in the 3rd party system and generate the datasource as told above.
Thanks
Arun
Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:12 AM

Similar Messages

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error while creating the data source

hi
iam creating generic data source using function module.
i inserted the function module and structure name,
when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
please guide me how can i overcome this
treat this is as urjent requirement
regards
kumar

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Problem in creating the data source in bw 3.5

hello gurus,
i have created a view in r3 for transaction table but i am not being able to create the data source for the same.
i have two fields in my table called amount n currency.
when i remove those two fields then i am able to create the datasource but with those two field present i am not being able to create the data source.
p.s- amount field is being reffered to another table in r3.
please help me.
Edited by: anup chaudhari on Apr 17, 2008 2:42 PM

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Problem in creating the data source in r3.

hello gurus,
i have created a view in r3 for transaction table but i am not being able to create the data source for the same.
i have two fields in my table called amount n currency.
when i remove those two fields then i am able to create the datasource but with those two field present i am not being able to create the data source.
p.s- amount field is being reffered to another table in r3.
please help me.

Hi Anup,
In that case u have to inlude table which contain amount field also in ur view. And need to give teh join condition.
Hope this helps.
-RajNi.

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

Re: Invalid Type CURR while activating the data source from R/3 to BI 7

Dear Expert,
I have created a data source using function module and has it successfully replicated in BI 7.
But when I try to activate it, I run into the problem associated with "Invalid Type CURR" with two of the CURR fields.
Could you help me to resolve this problem or provide me with some suggestions?
Thanks and appreciated.
Arthur

In SAP BW 7.0 Currency types are managed via transaction RSCUR.. Perhaps you should check if everything is ok (i mean to check if the Currency Types are transported) before to active your DataSource.
It's only a suggestion .. good luck !

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Getting error while creating XML data source

Hi,
I have converted access database into xml and now wants to convert the xml file into oracle database.while creating the xml database resource geting error ora-065550.PLS-00103:Encountered the symbol"Push" when expecting one of the following .(),*etc.
Why this problem I am facing.
Any Idea
Thanks in advace....

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Segment field missing while creating profit center master data in SAP ECC6.

Hi,
I am working on ECC6.0 IDES. When I create profit center master I dont see the field for Segment on the profit center master.
Is there any setting which needs to be activated to see the the field for Segment on profit center master.
Regards,
Raghav

HI Raghavendra,
Check if the segmentation scenario is available for general ledger at the following path
Financial Accounting (New)>Ledgers> Fields > Customer Fields > Display Scenarios for General Ledger Accounting
Regards
Sach!n
Edited by: Sachin Bhutani on Mar 26, 2009 11:23 AM

Price Field Changeable while creating the Shopping cart

Hi We are in SRM 4.0 and follow a classic scenarios.
For some materials we run program EBP_GET_BACKEND_PRICES
and get the prices from the backend, how ever while creating a shopping cart if the price differs we need to change the price but the field is grey.
how do we change the price ????
EX - My MAP in R/3 for Material A is 100 Rs. how ever while I create a shopping cart the price i need to enter is 102 how do I change the price.
can anyone throw light on this.
regards,
Nimish Sheth

Nimish,
for this you have to change the standard code.
In screen communication structures, there is a flag "price_changeable" that controls the edit mode of price field.
You have to change the standard logic to implement your behaviour in FORM price_changable_set from include LBBP_SC_APPF92:
IF es_item-mode EQ gc_display OR
    ( es_item-rfq_ind EQ gc_yes AND es_item-price IS INITIAL ).
    CLEAR: es_item-price_changeable.
ELSE.
    IF NOT es_item-catalogid IS INITIAL OR
       es_item-price_origin EQ c_price_origin_f OR
       iv_scenario EQ c_sc_generic_soco OR
       iv_scenario EQ c_sc_generic_history OR
       iv_scenario EQ c_sc_generic_workload OR
       ( es_item-price NE es_item-gross_price AND
         NOT es_item-price IS INITIAL ).
      CLEAR: es_item-price_changeable.
    ELSE.
      es_item-price_changeable = gc_yes.
    ENDIF.
ENDIF.
Rgds
Christophe

Error while tansporting the Data Source & Transformation

Dear Experts,
I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Password logon no longer possible - too many failed attempts
Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
Please help me out.
Thanks in advance
Neha

Hi,
Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
Thanks,
V.Senthil
Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

Fields missing while creating the data source

Similar Messages

Maybe you are looking for