Fields not visible after replication ?(hide tick removed)

Hi experts,
I have added fields from LO communication structure to extract structure and i have removed the Hide option in maintain datasource.When i am replicating in BI those fields are not visible.What is the reason?
I am eagerly waiting for reply.
Regards,
lap

Hi Lap,
U can delete the data source in RSA6, u can activate again from RSA5,
Here u dont need to do any setup tables, u will get the enhanced fields with Hide Mark,
U have to remove the Hide tick and Replicate..
U will get the added fields in BI then u map the transformation
I have done this once It works fine
Assign points if it Helpful to you,
I appreciate Geo quick Response..
Regards,
SHAIK

Similar Messages

FTPS file adapter setup fields not visible after SP13 install

After installation of SP13, I was looking for file adapter FTPS setup (fields described in SP13 release notes). I could not see any. It's just like the old adapter.
Java cryptolib is installed, and we checked it is there.
we recycled the whole thing.
Any idea what could be missing ?

Solved. We had applied SP12 file.
Note that this originates from the SP stack download tool.
We had followed the generic download process and it did not contain the SP13 tpz file.
I tried again this morning, when selecting source sp11 target sp13, The selection of packages selects
SAPBASIS12_0-10002900.zip... and not the SP13 one.
Watch out if you move two SP up !
Detailed solution :
Downloaded the SP13 zip file. the following way.
service.sap.com download/entry by app grp/sap content
process integration (XI content)/ XI_CONTENT_SAP_BASIS/ XI_CONTENT_SAP_BASIS_6.40/DB independant/ selected sp13 from the list
Unzipped, and put the tpz file in the import directory
of the repository. file name is XI3_0_SAP_BASIS_6.40_13_02.tpz
Imported it
And it works now
Thanks a lot for your help.

LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Note 916654 - LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

Portal content not visible after installation nw2004s

Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
John

Hello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers]

All the Google toolbar buttons(other then print) are not visible after installing Firefox 4

Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel

Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.

See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Hot spot s not visible after latest iOS version update on my iPad please help

hey personal hot spot is not visible after iOS latest version update on my iPad mini please help

Hey Devinder from chd,
For most issues with Personal Hotspot, try out the basic troubleshooting in the article below. It does talk about iPhone but the troubleshooting is the same for your iPad. If you are still having issues, let me know and I can see what else we can do after that.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
Take it easy,
-Norm G.

Download button on appstore is not visible after I have upgrated IOS 7 in my Iphone 5

Download button on appstore is not visible after I have upgrated IOS 7 in Iphone 5, how can I fix it?

I am using iPhone 4S. Under iOS 7.04 everything was working fine. Now that I have updated to new 7.1 version, I am finding that the overall phone speed as been degregated.
Some times when answering the phone, you select to answer or swipe, it seems to hang up the phone. I end up missing the call.
Some times when I try to hang up the phone, it does not hang up right away. The phone appears to get stuck, you hear voices on the other end, but the call has not dropped. It takes a while for the call to drop and free up the phone.
Typing is slow. As you type, it does not show right away, only after 2 to 4 words have been typed then it will show all those characters.
Internet browsing is slow.
I mostly use the phone for 3 things - Making/Receiving calls, Texting, and Internet browsing. I don't play apps.
This is NOT a jailbrake phone, it's as original as it can get. I am hoping a fix is put into place. I have really lost faith in Apple's way of iOS upgrades. This is my 2nd regret in upgrading to new iOS.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

Credit control field not visible in customer master after checking Spro

Hello Gurus,
I have configured Automatic Credit Control In IMG.
I have checked all the necessary spets required for the avtivation of Automatic Credit Control.
But I am facing in problem and will appreciate all your help for this problem.
In Customer master> Sales area data> Billing Document--> delivery and payment terms. Within delivery and payment terms the feild for credit control area is not visible.
I have checked in spro>financial accounting> Ac rec & Ac payable>customer account>master data>preparation for creating customer master> define account groups with screen laypouts (customers).
Within Define account groups with screen laypouts (customers)>account group 001(soldtoparty)details>field status>sales data>billing-->Hedging and credit contr. area I have tried it with optional as well as reuired entry and still the credit control field is not visible in customer master.
Pls provide me the steps as well as solutions for the problem.
Thanks & regards,
Dev.

pls check accunt group again
rgds
nitin

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Customized fields Not visible in GUI but visible in PCUI why

Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.

Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !!

Fields not visible after replication ?(hide tick removed)

Similar Messages

Maybe you are looking for