Fields Truncated when printing the report???

I have this exemple in the monitor when I generted the module:
" Meziane Noureddine
7, Rue de Geneve"
But when I print this report it's like this :
" Mezia Noureddin
7, Rue de Genev
Why????
thanks lot

Hi,
Set the printer off. then On.
Quit reports then reprint the report.
Hope this helps,
CB

Similar Messages

When printing the report , it will show an error

Post Author: tramp168
CA Forum: General
I use crystal report2005 in C#2005 to design several reports, all the reports can be shown normally when previewing on the all user computer, and the reports can be printed on most of user's PCs, but two users can't print the reports, when printing,it will show below error:
Error in file c:\docum~1\..............*.rpt
the request could not be submitted for backgroud processing.
how to handle the issue.
thanks all in advance!

Post Author: V361
CA Forum: General
do the two users who can not print, have the same printer types installed as those that the report does print on ? (May need to add a NEW printer definition to the failing computers, and see if the report works)

Problem when printing the report

Hi,
we have installed oralce 10g server.and created the reports all the formats are supporting by the server.if you give the direct printer option printer is printing junk values . any body help me on this.

Hi,
How many portlets are there in your page.
Are you printing the report portlets ?
Could you explain little bit clearly ?
Regards,
Vijay.B

LOGO not going when sending the report as Email attachement

Hi
We are calling reports in two ways (both as html format) to be sent as Email. The report includes company logo at the top
1.Running report in cache through Web.Show_document and
copy it by using copy_report_object_output and
displaying it using Web.show_document('mailto: '||:resorts_name.e_mail);
2. By using xml distribution list to dynamic emails
web.show_document('myserver...servlet?report=myreport&server=myserver&userid=user@ourdb
&distribute=yes&destination=ourxml.xml');
By using 1st method The report has to manually reattach, and is attached and sent but Company Logo is not being displayed and it shows only the html file and at the logo it displays the red crossed. The reason seams that when it produces the report it creates two file html and gif file and while reattaching it attach only htm and not logo.
By Using 2nd method of the distribution list and the xml file it attaches report in the body however it disturbs the margin due to the email headers and it shows the logo but when prints the report again it show red marked blank area as of 1.
Does any one faced the problem of logo not being displayed at the email when report was sent and any solution regarding this will be highly appreatiated.
Regards
Yasir Maqbool

Hi,
After generating them write a program to send the mail .
for that convert the pay slip to PDF format and attch it to mail.
for converting it to PDF use this FM <b>CONVERT_PAYSLIP_TO_PDF</b>
after conversion send it using <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b>
Regards
vijay

My report is printing half of the page when I print the report Hp psc 1315

My report is printing half of the page when I print the report in this printer
Hp psc 1315 all in-one and when the operating system is windows xp , but when
I run the same report in windows me , and the same printer it is running well
And my report version is :
Report Builder 6.0.8.23.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.20.0
waiting for your valuable answer .
Best regards
Jamil alshaibani

i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
please help
betst regards
jamil alshaibani

How can I make signature darker when I print the report?

I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
I used file link and OLE, both did't make it.
Thanks.

No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

The second time when i print the report the page appear cut in the right

hi,
I created a report in Report Builder 6i. When i print the report appear well, but when i try to print the same report second time in the right of the page appears cut.
Why? What should I do to appear the entire page at the second print?
Thx.

Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

Fields missing while printing crystal reports !!

Hello everyone
I have a crystal report application in VB.NET 2005, which gets the values of a field from the database and supports printing of the report in the following formats
1. pdf
2. directly to a printer - printout
When i export the report using reportdocument to pdf , all the fields are getting printed : Normal - As expected
But when i print the report directly using PrintToPrinter method,i am not able to print some of the fields. i.e some of the entries are missing in that report printout
Can someone guess what could be the problem ???
Are there any limitations / preconfigurations that needs to be done apart from setting page size,margin before using the PrintToPrinter method
Regards
Srivatsa

OK, a few incongruencies here:
I'm using the version of the Crystal Reports that ships along with the Visual Studio.NET 2005.
- that would make is CR 10.2
We have also tried applying the latest service packs crxir2_sp4_full_build
- So SP 4 for CR XI release 2 would not do you much good as per above (if you are indeed using CR 10.2(?))
- How did you get to the crxir2_sp4_full_build? This is in a gated section of the SAP website. The only publically available SP 4 for CR XI r2 is "incremental... If you did apply crxir2_sp4_full_build, then you are working with CR XI r2 now...
The behavior is seen in the web application and the behavior is seen both in the dev and deployment system.
- So this does not work anywhere? If so, why bother going to deployment?
Also i tried exporting to pdf soon before / after printing. But the fields are present in the pdf and not on the printouts
- Confirm that you do see the fields on an exported PDF and when you print the PDF you get a blank printout?
More clarification needed:
We need to be absolutely clear on what version of Crystal Reports you are using. Open your .NET project, go to your references and look for CrystalDecisions.Crystalreports.Engine.dll. What version is this assembly?
Also, please answer the rest of the questions above.
Ludek

Unable to print the report after SP2 (CR 2008 / VS 2008)?

I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

Hi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

Cannot choose printer when printing HTML report

Hello,
I have lost many many hours trying to print correctly a report that is composed only of a JPEG image.
After a conversation in the forum, I concluded that the LabVIEW has a bug printing Standard Reports, as it cannot manipulate correctly the margins and the scale of the image. But, when using Standard Reports I could choose which printer to use.
So, I use HTML Reports that print the report smoothly, but the choise of the printer has a problem. No matter which printer is chosen by a Ring Menu, it prints to same printer all the time.
Could you please give me any hint to solve this problem?
I attach the corresponding code:
Solved!
Go to Solution.

Hey guys, this is Paul with National Instruments.
Being employed at NI I am obligated to provide a big disclaimer about the information I am about to provide:
MANUALLY CHANGING YOUR WINDOWS REGISTRY CAN CAUSE CORRUPTION AND ERRORS IF YOU ARE NOT CAREFUL. DO SO AT YOUR OWN RISK.
With that being said, nikosfs was on the right track by editing his Windows Registry to perform this action. Please see the following steps, and see if it helps further explain what you need to do:
Open the Registry Editor. To do this, click Start >> Run and type "regedit", then press OK.
Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows. In this key there should be an entry called Device with values that should match up with your default printer.
Right click on the Windows key, choose "Export" from the menu that pops up, and save the Registration File as printer1.reg.
Leaving the Registry Editor open, change your default printer. To do this, go to Start >> Settings >> Printers and Faxes. Right click on the printer that you want your report to print to, and choose the option "Set as Default Printer".
Go back to the Registry Editor, it should be noted that the value of the Device entry has changed to the new default printer. Right click on the Windows key again, choose "Export" from the menu that pops up, and save the Registration File as printer2.reg
These two files may now be used to manipulate your default printer settings in conjunction with the System Exec.vi. The figures below show how to use the registry files and the System Exec.vi.
→ The "/s" in the text field makes sure that this vi will run without interrupting regular user interaction.
→ The path constant is set to "c:\" because the Registration Files were saved directly in the C drive. Change according to location of Registration Files.
Make sure that this operation is called before the Print Report.vi is called, as it will print just to the default printer.
Paul Davidson
Sound and Vibration Software Staff Product Support Engineer
National Instruments

Print the report on page has width larger than height and not landscape mode

Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....

Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Print the report title

Hello All,
I have a report page with some search item.When I print the page the title does not appear on the output page.
How I can print the report and its title on the output page.
any quick help please

Hi Mohammad
I allow users to download reports using the Interactive Reports Region.
If you use that method then you can insert a title at the top of the report by populating the Report Region > Print Attributes (TAB) > Page Header
Note: This is available when using APEX coupled with Oracle Business Intelligence Publisher. It does not work with "CSV" output.
Kind regards
Simon Gadd

Print the report by code

Hi to all,
I'm using Asp.Net 2.0-C#, Crystal Report 11 SP1.
I bind some records to the report, i want to print the report when a checkbox is clicked instead of CR Print button, how to do this, experts please post any code?

Hello,
I posted hyperlinks to the [Developer Library|https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary], and the [Crystal Reports .NET SDK Guide|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm] for CR XI R2.
From the main Developer Library page scroll down the page to the [XI|http://devlibrary.businessobjects.com/BusinessObjectsXI/en/devlib.htm] (v11.0) and the [XI R2|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm] (v11.5) versions of the Crystal Reports .NET SDK Guide.
Click on one of the above links to choose the version of the Dev Library you'd like to explore. After it loads you'll see Content and Search buttons in the left hand pane. Click on Search and search for PrintToPrinter. In the results list you'll see the PrintToPrinter method. Click on this and you'll see the information you're looking for.
Please start using the above links to search for your answers - the information is there.
Sincerely,
Dan Kelleher

Cannot print the report on Window 7 64 bit

Hi all,
I try to print the report using Print icon on Crystal Report Viewer but it does not print out and no error display. Any idea how to fix it? Is it a bug when print on Window 7 64 bit OS? Thanks.

I'd go with Don's suggestion:
http://support.microsoft.com/kb/184291/en-us
- Ludek

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

Fields Truncated when printing the report???

Similar Messages

Maybe you are looking for