Fiery features : image shift not available

my office recently changed printers to a canon imagepress C1+ and i upgraded to a new computer running 10.6.3. we have downloaded and installed the latest driver from canon.
the "full properties" glitch is mentioned at [url="http://discussions.info.apple.com/thread.jspa?threadID=2190095&tstart=180 "]in this forum thread[/url], as is a workaround. however, for some reason *image shift* is NOT in the list of features i can add to the +quick access+ pane.
this is an important feature from the user end, as we need to print double-sided and this corrects the placement of the second side. any suggestions welcome.

There are two EFI (Fiery) RIPS available for the imagePRESS C1+. There is the imagePRESS-T1/T2 and the imagePRESS-Q1/Q2. The 1 indicates that the RIP is using system v1.x while the 2 indicates the RIP is running system v2.x. For the imagePRESS-Q2 and imagePRESS-T2, there is a now a 10.6 driver available that does not suffer the same restrictions as the 10.5 driver. You can download this driver via the following link...
http://www.usa.canon.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2478&mode lid=17921
If you are using a T1, then you can download the 10.6 driver via the following link...
http://www.usa.canon.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2478&mode lid=14778
Note that if you have a Q1 or T1, ie it is running system v1.x, then you will need to get the firmware on the RIP updated by a service technician to v2.x so that you can use this driver.
Pahu

Similar Messages

...notifications are a paid only feature, they are not available with a free account...

Hi Support-Team,
is there a chance to change this:
"... notifications are a paid only feature, they are not available with a free account ..."
If we can't send a notification to an other user FormsCentral doesn't make sence and will cancel the account... That would be a pity, because otherwise everything would work very well.
Kind regards
Andreas

Hi;
Thanks for your feedback, but notifications are a paid feature and are not available in a free account. That isn't likely to change. Hopefully there is enough value in this and the other features of a paid account for you to consider an upgrade.
Thanks,
Josh

Binary images description not available

I scanned some pages from a book on my Epson scanner which converted them to jpg files. I then tried to import those images into iPhoto to clean up the edges but it won't import. Every time the program crashes. I've restarted and repaired permissions. Below are the problem details that are sent to Apple. What stood out in my eye was the phrase, "Binary images description not available".
Could someone tell me why this is happening and what I might be able to do to fix it.
Cheers,
sws
Process: iPhoto [194]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [127]
Interval Since Last Report: 2388 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 2068 sec
Per-App Crashes Since Last Report: 3
Date/Time: 2009-09-16 15:17:13.819 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 60AE4FE7-3128-40A8-9A04-DEF7D0037A59
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000018c11b8
Crashed Thread: Unknown
Error Formulating Crash Report:
Called memoryAtAddress: 0x1000, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 194.
0x934bffeb
0x94a0de3b
0x00096e60
0x00090a67
0x00090174
0x000900df
0x000a57aa
0x000a54be
0x000a0b52
0x000038f5
0x0000a992
0x00002ea4
0x000029f1
0x94e9d03b
0x0000c254
0x94e71155
0x94e71012
Backtrace not available
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x2131fe00 ebx: 0x00000000 ecx: 0x2132093c edx: 0x018c11b8
edi: 0xa0100c20 esi: 0x16aa0604 ebp: 0xb0926168 esp: 0xb09260d0
ss: 0x0000001f efl: 0x00010246 eip: 0x9083a834 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x018c11b8
Binary images description not available

Same problem under both the administrators account and the new one.
Under the System Configuration tab on the Problem Report this is what it says
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.21)
Bluetooth: Version 2.1.8f2, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, (null) mA
USB Device: USB2.0 Hub, (null) mA
USB Device: BUFFALO INC. USB-SATA Bridge, (null) mA
USB Device: BUFFALO INC. USB-SATA Bridge, (null) mA
USB Device: LHD USB Device, (null) mA
USB Device: USB-SATA Bridge, (null) mA
USB Device: USB2.0 Hub, (null) mA
USB Device: GV-MACTV, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: USB MFP, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
the Problem Detailas are as follows
Process: iPhoto [1940]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [127]
Interval Since Last Report: 35054 sec
Crashes Since Last Report: 12
Per-App Interval Since Last Report: 350 sec
Per-App Crashes Since Last Report: 12
Date/Time: 2009-09-17 01:11:33.032 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 60AE4FE7-3128-40A8-9A04-DEF7D0037A59
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000018a100c
Crashed Thread: 31
Thread 0:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x954db2ac 0 + 2504897196
5 ??? 0x954db0c5 0 + 2504896709
6 ??? 0x954daf39 0 + 2504896313
7 ??? 0x93f076d5 0 + 2482009813
8 ??? 0x93f06f88 0 + 2482007944
9 ??? 0x93efff9f 0 + 2481979295
10 ??? 0x93ecd1d8 0 + 2481770968
11 ??? 0x00123e6a 0 + 1195626
12 ??? 0x0000354e 0 + 13646
Thread 1:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x01362201 0 + 20324865
7 ??? 0x01350363 0 + 20251491
8 ??? 0x9132adfd 0 + 2436017661
9 ??? 0x9132a9a4 0 + 2436016548
10 ??? 0x94e71155 0 + 2498171221
11 ??? 0x94e71012 0 + 2498170898
Thread 2:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x01362201 0 + 20324865
7 ??? 0x01350363 0 + 20251491
8 ??? 0x9132adfd 0 + 2436017661
9 ??? 0x9132a9a4 0 + 2436016548
10 ??? 0x94e71155 0 + 2498171221
11 ??? 0x94e71012 0 + 2498170898
Thread 3:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x9135f3d5 0 + 2436232149
5 ??? 0x013518a5 0 + 20256933
6 ??? 0x9132adfd 0 + 2436017661
7 ??? 0x9132a9a4 0 + 2436016548
8 ??? 0x94e71155 0 + 2498171221
9 ??? 0x94e71012 0 + 2498170898
Thread 4:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x00505a15 0 + 5265941
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 5:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x96698264 0 + 2523497060
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 6:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91372932 0 + 2436311346
3 ??? 0x005115ae 0 + 5313966
4 ??? 0x00510dcc 0 + 5311948
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 7:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91372932 0 + 2436311346
3 ??? 0x005115ae 0 + 5313966
4 ??? 0x00510dcc 0 + 5311948
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 8:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x006c4132 0 + 7094578
7 ??? 0x0069f0f4 0 + 6942964
8 ??? 0x006c0953 0 + 7080275
9 ??? 0x9132adfd 0 + 2436017661
10 ??? 0x9132a9a4 0 + 2436016548
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 9:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962a4b76 0 + 2519354230
5 ??? 0x906d5aa2 0 + 2423085730
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 10:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962a4b76 0 + 2519354230
5 ??? 0x962cd1d8 0 + 2519519704
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 11:
0 ??? 0x94e8f6fa 0 + 2498295546
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 12:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91691a09 0 + 2439584265
3 ??? 0x94e71155 0 + 2498171221
4 ??? 0x94e71012 0 + 2498170898
Thread 13:
0 ??? 0x94e402ce 0 + 2497970894
1 ??? 0x94e722c6 0 + 2498175686
2 ??? 0x94eb7539 0 + 2498458937
3 ??? 0x90849ed7 0 + 2424610519
4 ??? 0x94e71155 0 + 2498171221
5 ??? 0x94e71012 0 + 2498170898
Thread 14:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x9138e520 0 + 2436424992
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 15:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92222e17 0 + 2451713559
5 ??? 0x962c4057 0 + 2519482455
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 16:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92222f90 0 + 2451713936
5 ??? 0x962c4057 0 + 2519482455
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 17:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x962c5e83 0 + 2519490179
3 ??? 0x962a4d6a 0 + 2519354730
4 ??? 0x962c5b00 0 + 2519489280
5 ??? 0x9222df72 0 + 2451758962
6 ??? 0x962c4057 0 + 2519482455
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 18:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962c5b00 0 + 2519489280
5 ??? 0x9222febc 0 + 2451766972
6 ??? 0x962c4057 0 + 2519482455
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 19:
0 ??? 0x94e709c6 0 + 2498169286
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 20:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e47236 0 + 2497999414
2 ??? 0x93f6dbf1 0 + 2482428913
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 21:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x00505a15 0 + 5265941
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 22:
0 ??? 0x94e821fa 0 + 2498241018
1 ??? 0x931837b5 0 + 2467837877
2 ??? 0x94e7837f 0 + 2498200447
3 ??? 0x94e78325 0 + 2498200357
4 ??? 0x94e7d3bd 0 + 2498220989
5 ??? 0x9319208d 0 + 2467897485
6 ??? 0x93194d00 0 + 2467908864
7 ??? 0x9319576c 0 + 2467911532
8 ??? 0x00518341 0 + 5342017
9 ??? 0x005188c4 0 + 5343428
10 ??? 0x0051a36f 0 + 5350255
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 23:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x94e64ce9 0 + 2498120937
3 ??? 0x9134b453 0 + 2436150355
4 ??? 0x00513eb9 0 + 5324473
5 ??? 0x0051244c 0 + 5317708
6 ??? 0x00519378 0 + 5346168
7 ??? 0x0051a36f 0 + 5350255
8 ??? 0x94e71155 0 + 2498171221
9 ??? 0x94e71012 0 + 2498170898
Thread 24:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 25:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 26:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 27:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 28:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 29:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92b735cd 0 + 2461480397
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 30:
0 ??? 0x94e709c6 0 + 2498169286
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 31 Crashed:
0 ??? 0x94e410d5 0 + 2497974485
1 ??? 0x93416805 0 + 2470537221
2 ??? 0x934172ff 0 + 2470540031
3 ??? 0x9132613e 0 + 2435998014
4 ??? 0x1bfa144a 0 + 469374026
5 ??? 0x1bf9de61 0 + 469360225
6 ??? 0x1bf9ea33 0 + 469363251
7 ??? 0x1bfc10ff 0 + 469504255
8 ??? 0x1bfc135e 0 + 469504862
9 ??? 0x9132adfd 0 + 2436017661
10 ??? 0x9132a9a4 0 + 2436016548
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 31 crashed with X86 Thread State (32-bit):
eax: 0x018a1000 ebx: 0x94e41095 ecx: 0x00000000 edx: 0xa045f1a0
edi: 0x00000020 esi: 0x00000000 ebp: 0xb10b19e8 esp: 0xb10b19b0
ss: 0x0000001f efl: 0x00010217 eip: 0x94e410d5 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x018a100c
Binary Images:
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <458eed38a009e5658a79579e7bc26603> /usr/lib/dyld

Jolz: uses a CPU feature which is not available?

First lines from m000 trace after the header:
*** 2009-03-30 16:34:30.780
*** SESSION ID:(1565.8) 2009-03-30 16:34:30.780
*** CLIENT ID:() 2009-03-30 16:34:30.780
*** SERVICE NAME:(SYS$BACKGROUND) 2009-03-30 16:34:30.780
*** MODULE NAME:(MMON_SLAVE) 2009-03-30 16:34:30.780
*** ACTION NAME:(JAVAVM JIT slave action) 2009-03-30 16:34:30.780
jolz: Compiled code for java/util/HashMap.<init>; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap.resize; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap.unmaskNull; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap$Entry.getKey; uses a CPU feature which is not available
the last few entries are:
jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$EnsureLoserLiveRangeIterator.apply; uses a CPU feature which is not available
jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$GenBitSetIterator.apply; uses a CPU feature which is not available
This eventually leads to ORA-07445: [joe_run_vm()+15316] [SIGSEGV] [ADDR:0x24000] [PC:0x33FAB74] [Address not mapped to object] []
What is causing the "CPU feature which is not available" messages to be reported?
Thank for any assistance.
Tracey

Hi Tracy,
This typically means that the JIT has persisted compiled code that was built on one set of hardware that may use chipset features that are not available on the hardware at runtime. An example of this might be if the code were originally compiled on a modern x86 chip and makes use of SSE2 instructions, but then is asked to later run on old Pentium hardware without such instructions.
Regardless, it should not lead to ORA-7445. Can you please file an SR with your exact hardware description as well as tracefiles and also description of your deployment (e.g. wehther this database was migrated from one machine to another, etc...)
In the meantime, a likely workaround for you would be to connect as SYS and issue:
TRUNCATE TABLE SYS.JAVA$MC$
and then restart the instance.
thanks,
-Rob
JVM development

Image Processor not available

I have CS3 and in Bridge, I do not have the Image Processor option available. Does anyone know what may be causing that? I do have it available in PhotoShop but I want to access it through Bridge. Using OS 10.5
thanks

I looked in my preferences for Bridge and cannot find anywhere that mentions
Image Processor.
It should be visible in the Start up scripts section of the Bridge
preferences.
But if it did work before and suddenly stopped a restart for Bridge holding
down option key to refresh preferences should do the trick.
If it never worked and it is present and working in PS itself but not
visible in the Bridge Start up preferences your install did not work
properly I'm afraid.

Show Default Image when actual Image is not available

Hi,
The Customer is using BI Publisher to generate a Report with the Inventory Item Details. This report also shows an Image of the Item. These Image files are stored in a different server.
We are able to dynamically show the Image based on the Item Numbers using the URL{} tag.
We are facing an issue when there is an Item when there exists an Item with no corresponding Image File. The PDF is generated without any image. In such cases, the requirement is need to display a Default Image showing "NO IMAGE".
During XML Extraction, we do not know whether the Image file is available in the server.
How do we handle this specific requirement.
Any assistance is highly appreciated.
Thanks and Regards,
Balachander.

Having raised a service request with Oracle, it would seem that this is not possible -
"Unfortunately, In the BIP core, there is no functionality to test that a file ( containing an image ) exists or not ."
The problem I have is that the URL referencing the image is concatenated and includes the XML item for a reference number. That reference number, and therefore the XML item, is always available but the image that corresponds to it is not - so I can't test for a null or false return because BI Publisher does not recognise the concatenated string of the url as having a returned value.
This would be a problem if the layout options in Word were more flexible (better) - being able to add an image to the background of a table or cell would have solved my problem but, sadly, that is not possible in the version of Word I'm using (2003). I'm not sure whether it's possible in newer versions though?

Nokia 5310 image sequence not available??

i just bought this phone 2 days ago. everything was ok but not all.
Firstly, the image sequence mode is not available yet? why? my sroll is on it and it does not bold up. should i wait for updates?
Secondly, the respond time is quite slow. Sometimes it even restart itself. Wait for updates too? or send to Nokia??
btw, i'm using a 1gb micro sd..

you must change the resolution to 640x480 or smaller to take advantage of image sequence. at it's highest setting of 640x480, you only get three images in sequence. at the smallest, 160x120, you get six images in sequence, the sequences of images is placed in a folder in your image gallery.

Images are not "available" in SRM MDM 5.5 SP5 catalog

Hello,
We have SRM MDM 5.5 P5 and we have uploaded photos in the record table. But images do not appear in the catalog "detail view". Instead we get the default "image not availble" red image.
Is special customizing/setting required to be able to watch images in catalogs?
Thanks in advance.
Will reward points.
Le Radis.
Edited by: Le Radis on Feb 7, 2008 4:31 PM

Hi Le,
There could be the 3 reason while images are not displaying on the catalog end:
1. check all the setting in Data manager as mentioned below which are required:
   add JPG to MIME Types table
   you should see 2 entries in Hyperlink Types table (link and rendered)
   add the 2 types of hyperlink types to the Hyperlink table
   In the Catalog Items table, you can then add hyperlink records for catalogue items.
2. Just check with the OCI mapping has been configured properly via UI:
    go for UI, then login with user as "Master" and choose option as "Shopping Cart" then click on "OCI Mapping" and then field mapping window will open and check for the following entry as tejas mentioned:
NEW-ITEM_ATTACHMENT : Hyperlink-URL
NEW-ITEM_ATTACHMENT_TITLE :Hyperlink-URL Description
3. go for the User specific Configuration in UI as i have mentioned earlier:
Add the image field in your customization then save the configuration.then check on the catalog end.
otherwise customize your setting to the Specific user (you can choose the user from the dropdown combo box ),save the customization and try to login with this perticular user on the catalog end then check for the images.
Hope this will solve your problem.
TNR,
saurabh...
Edited by: Saurabh Kumar Sahu on Feb 11, 2008 8:56 AM

Actions have to be done manually/ image size not available

i have a foder opened up in bridge , all photos selected, I go to tools/photoshop/batch/I choose my own action, web 1400, which includes reducing to 1400 px, reduce resolution, and saving to jpeg.
In set, i choose my own actions, source: folder, choose the original folder, destination:folder, create new folder,ok.
i have to do all the oks and saves by clicking manually, all in the end is fine, but that's odd.
OR FROM PHOTOSHOP/windows/actions; it just wont work all together; My action is called web1400, includes 3 commands::
2 image size (for reducing size, resolution) and save to jpeg.
I select web 1400, then I click the play icon (3rd from left) . that brings the selection down 1 step to image size and a window appears: image size is not currently available.

You should make sure that your printer is selected in Page Setup, rather than the generic Any Printer. You may need to look for it in Options... when you choose it in PowerPoint.

Linux - image is not available

hi
ubuntu 7.10 - images not showing!!!
(imgkunde.source = k.nativePath;)
this
application ->
works with windows ! any idea?
private function loadimg():void {
myFilek.browseForOpen("Open", [imagesFilter]);
myFilek.addEventListener(Event.SELECT, fileSelected);
function fileSelected(event:Event):void {
var k:File = event.target as File;
imgkunde.source = k.nativePath;
}

For future work try this:
Click to view full size
OT

Edited iphoto image is not available to keynote

I have edited photos (boost colour, etc.) but find that this edited photo is not then available to import into keynote or maybe I am using the wrong method. I can put them into ibook but I don't want to use ibook as it is not very good for a slide show.

For future work try this:
Click to view full size
OT

Image Maps not available?

I have RH8 and noticed the html "image map" functionality does not work in a generated a Word document and/or a PDF document. Can someone confirm this is correct? I looked around for some kind of setting, but I can't find one.

Hi there
This would seem to make sense that Image Maps would fail to convert to a medium primarily intended for printing.
If you feel it should operate differently, please advise Adobe via the Wish Form. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

"Image Capture" not available on my Mac

I have a Macbook Pro OS X Mavericks 10.9.5, the mid-2014 model. I don't have image capture on my mac but i have iPhoto, how do I download it?

Nevermind, I found it thanks.

HP d155xi "quality" and "duplex" features not available on OS X 10.4.8.

I have a networked HP d155xi that I print to from my G4 iMac running 10.2.8 (Jaguar) with no problem. Recently I purchased an Intel Core 2 duo iMac running 10.4.8 (Tiger) and downloaded the s/w driver for this printer from the HP website. Installation went fine. Looks like HP has changed the interface. Fine. The problem is it looks like the "quality" (draft/normal/best) and "duplex" (two sided printing) features are not available. In looking quickly through this forum, I saw some similar postings (but not with an HP d155xi) that seemed to indicate that HP did not provide these features for 10.4.8. Would appreciate some clarification on this and/or a work-around. Thanks.
iMac Mac OS X (10.4.8)

The word from HP: "The version of software, you have downloaded from the HP website, is not compatible with the Intel processor or Mac OS 10.4.8. The software was released in 2005. You will have printing function as Apple has added pre-installed print drivers on the Mac with the Intel processors. As this is an older model that was introduced 5-6 years ago, software has not been developed that is compatible with the Intel based Mac for the Officejet d155xi. As a product becomes older, HP engineers do not update the software."
I also called Apple and they said printer s/w is the responsibilty of the printer manufacturers, so there is nothing Apple is going to do about it. So, I guess I'll be going shopping soon for a replacement multi-function printer (print, scan, copy, FAX) that has all its features fully supported by by 10.4.8. Anyone have a good recommendation? In parting, the HP d155xi features that are not available on 10.4.8 are print quality, paper selection tray and duplexing.

Master image not available?

after downloading my pics from a sd card, my photos sow that master image is not available. can someone help? i am a new mom and all the pictures are of my son. i have deleted them from the sd card. I am not fmiliar with aperture so sorry if this is a dumb question. i just really want to be able to export, print and actually have my photos.
thanks in advanced

missbeba, tell us more, please.
It is hard to guess, what might be wrong without more information.
First of all, what is your Aperture version and what is your MacOS X version?
my photos show that master image is not available
Where does Aperture expect your photos to be? You can see that, when you select one of the photos with the missing master/original and use the command "File > Locate Referenced Files".
This will open a panel, with the versions with missing master in the upper part, and to the right is a thumbnail of the selected image. Below the thumbnail is the file path the original file. What does it say? Are your missing photos still in that location?

Fiery features : image shift not available

Similar Messages

Maybe you are looking for