FIFO batch determination while delivery in SD

Hi Experts
I did tried to search FIFO batch determination while delivery in SD, but could not find any solution. Please suggest.
1. Strategy type -SD01
2. Batch search Procedure - SD0001
3. Allocated SD Search procedure to the sales area + Sales doc. Type
4. Activated automatic batch determination in SD.
5. Class - CLASS_FIFO is created with Char- LOBM_LWEDT
6. Sort rule - SORT_FIFO and assigned Char - LOBM_LWEDT
7. Create material and assiged Class - CLASS_FIFO and Batch management is activated
8. Maintained condition record VCH1 in keycombination - Material.
After all above configuration, I am able to do the automatic batch determiation. The suggest where I am wrong.
The same configuration I have done for FEFO and its working.
Thanks in advance.
Regards,
Kaushal Sharma.

I have resolved the problem
Happy to note you have resolved on your own but at the same time, your above comments are not going to help anybody who face similar issue.  Please make it as a practice to update the forum properly as to how you resolved
G. Lakshmipathi

Similar Messages

  • Automatic Batch determination while creating outbound delivery

    Hi,
    I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
    1.CT01- Creation of Characteristics. ( Define Selection Class )
    2.CL01- change. ( Define Selection Class )
    Add Characteristics in u2018CHARu2019 tab And save .
    3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
    4.Batch Search Procedure & Strategy type
    V/C3 u2013 Batch Search Procedure and assign the strategy types
    a.To create condition type T. code V/C1
    b.To create access sequance T. code V/C2
    5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
    6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
    7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
    Please let me know is there any other step, apart from it.
    Tx
    Uts

    Dear saravanan,
    Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
    Done!
    Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
    Done!
    Re:check CL01 - char - is maintained with CT01 char
    Done!
    Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
    Done!
    Still i am not able to get batch automatically...
    Is there any LIFO or FIFO settings i have to maintain in Material master.
    Pl guide.
    Tx
    Uts

  • Automatic Batch Determination in Delivery documentation

    Dear all,
    I am trying to do automatic batch determination in Delivery created w.r.t. Sales order.
    if the material availability date in Sales order in say 15.11.2007, while activating batch determination check in Sales order will it prompt the batch for the sales order stock for the current date? It is not happening for the current date nor for the future date.
    This is being tested in ECC  6.0.
    Can anyone help with the solution please?
    Thanks
    Kumaran

    Hi Kumarank
    I am not sure whether the following links would be of helpful to you.
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283c9a4f7811d18a150000e816ae6e/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283ab94f7811d18a150000e816ae6e/frameset.htm
    Thanks
    G. Lakshmipathi

  • Batch Determination while putting Batch Manually

    Dear Friends,
    We just activated batch determination for Delivery process. now delivery determining automatically
    batch when we are going to create delivery.
    we have a question..
    When we select any line from Delivery and press batch split and then delete line from batch split screen.
    now we can manually add batch and it is not taking care of that batch determination rules.
    how can we restrict this bypassing of batch determination stretegy.
    thanks with regards
    Malik

    HI
    Batch Determination is based on the Selection type batch Determination
         immediate selection according to selection criteria
    N     no selection at beginning of batch determination
    O     selection with no selection criteria
    F     selection criteria cannot be changed in batch determination
    Check how you maintained in VCH1/VCH2/VCH3
    if you want the system automatically at the time of delivery mentioned "O"
    and also check the sort rule
    Regards,
    Prasanna
    Edited by: prasanna_sap on Feb 1, 2012 10:41 AM

  • Help needed in Automatic Batch determination during Delivery

    Hello gurus..
    Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
    If any can give me the config that goes with it, that'll be great

    Steps to configure Batch Management
    1)  Specify Batch Level
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction  OMCT
    2)  Batch Number - Activate Internal Number Assignment
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction  OMCZ
    3)  Batch Creation - for Goods Movements 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
    4) Characteristic Value Assignment -- Update Standard Characteristics 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
    5) Activate Batch Classification for Goods Movements in Inventory Management 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction  OMCV
    6) Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction  OPLB
    7)  Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction  V/C7
    8) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction  OPLF
    9) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction  V/C2
    10) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction  OPLE
    11) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction  V/C1
    12) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM   Search Procedure Transaction  OMCY
    13) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction  OPLG
    14) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction  V/C3
    15) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction  OMCG
    16) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction  OPL8
    17) Batch Determination – Batch Search Procedure Allocation(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction  V/C5
    18) Batch Determination – Activate Automatic Batch Determination(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction  V/CL
    19) Batch Determination – Batch Selection Class
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction  CL01
    20) Batch Determination – Sort Rule
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction  CU70
    21) Batch Determination – Make Settings for Batch Where-used list
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction  OMBB
    thanks
    G. Lakshmipathi

  • Batch Determination in Delivery

    Hi All,
    In batch determination (Delivery) on clicking batch split and opting for batch determination i am not able to find batches....if i click on log and expanding it shows the following message.
    B77                Material For Batch Mangement
    Batch stocks are being read...
       Batch 111 Storage location 0001
    Search according to selection criteria...
       Batch 111
    E-    Does not correspond to selection criteria(This is in red color line)
    Availability of batches...
    Batches are being sorted...
    If I select batch determination-> without class selection in the menu bar in Batch Determination screen(delivery)
    then it is picking the batch.
    Kindly guide me.. where i have done the mistake.
    With Regards
    Azeez.Mohd

    In addition to the above,
               assume you are using, Characteristic: LOBM_HSDAT = Batch date of mfg.
    if yes,
      check the stock in MMBE , now goto MSC2N key in respective material / Plant & batch.
    in classifcation tab,- check whether date of mfg field has value or not.
    if not enter the value in Basic data -1 tab,
    now try to create the delivery & check.
    ( assume, you have done the necessary batch determination customization )
    Test & revert

  • Issue with batch determination in delivery

    Hi All,
    I have an STO and when creating delivery via VL10I I get an error "doc is incomplete, you cannot save delivery". I have all the sufficient data in STo for delivery creation. Infact there should be batch strategy not taking place i guess.
    When I enter batch number in STO then a delivery is created, why? batch shd be determined automatically when creating deliveries.
    But there is no issue is quality system with same materials and plants I can create deliveries..

    Hi,
    Are you sure that the incompletion is because of Batch determination?
    In that case goto
    Spro> Log. general> Batch management> Batch determination and batch check> Activate automatic batch determination for delivery item
    and flag Auto Batch det check box for Item category "NLN"
    Hope this helps.
    Regards,
    sharan

  • Batch determination during delivery and Picking

    Hi,
    Please let me know how to meet the below requirement.
    During delivery creation for sales order automattically through the program RVV50R10C, The system should do the batch determination automatically for the delivered qty and the picked quantity should be filled auotomatically same as the delivered qty.
    I have maintained condition record for batch determination for the combination of Shipping point, Sales document type and Material type and also automatic batch determination for delivery item categories is activated in customization ( the check box for delivery item category is ticked).
    With the above setting manual batch determination is working in delivery. but not the automatic batch determination and also the picked qty is not filled.
    Regards,
    Prasad

    Hi Sats,
    1. The respective item cat. has been checked in Automatic Batch Determination for Delivery Item cat. u2013 Transaction V/CL - maintained
    2. Configured it correctly in transaction V/C5 where you configured the search procedure for batches in the sales docs with respect to the sales area and sales doc type which you are using -maintained
    3. Check if shelf life expiration date needed. If yes check in transaction CL03 with the class type 023 - Class maintained in the material master
    4. Make sure the batch management check box has been ticked for the materials which you want automatic batch determination to be done in MM03 u2013 Sales: General/Plant tab, Purchasing and warehouse management tab. - The batch management indicator is set
    5. Open your delivery in VL03n u2013 check the batch determination display. Select the strategy analysis and check. it gives you information whether the condition types were successfully taken into consideration. If not check in VCH3 -  Condition record has been specified.
    Manual batch determination works ( select the line item in delivery > Batch split> Batch determination )but not the automatic batch determination.
    Regards,
    Prasad

  • Automatic Batch determination at Delivery

    Hi,
    We have multiple batches for a material. Is it possible to determine Automatic batch determination by FIFO at the time of delivery.
    e.g a material A has stock 50 Pcs.
                                 10 Pcs- Batch A
                                  20 Pcs -Batch B
                                   20 Pcs - Batch C
    Suppose i have sales order for 30 Pcs. Then at time of delivery can system automatically allot batch A and B on FIFO basis. I dont have to select batch for 1o pc

    Hello,
    Ideally FIFO method is used for batch managed material  along with material which have shelf life expiry date check. If you have setup FIFO method for batch determination for stock removal for a combination of your warehouse and storage type, then system will those batch which are oldest. It will check the Goods reciept date for your batch in the respective storage bin and will pick those batches.
    Now as in your case, 10 Pcs- Batch A , 20 Pcs -Batch B , 20 Pcs - Batch C, system is bound to take those batch which are oldest , with respect to there goods reciept date.
    I hope this helps
    BR,
    Tushar

  • Batch Determination during delivery

    Hi All
    While doing delivery for STO, system is giving a message  "Batch determination is not possible because there is no search procedure"
    But Batch determination is happening fine for all movements  except STO Delivery.
    is there any other settings required for STO Delivery (for inter and intra company codes) for batch determination.
    Regards
    M S K

    Ok

  • Empty batch determined in delivery

    Hi friends,
    I have a problem in batch determination and I dont have much knowledge on this. We are using automatic batch determination in Deliveries. For some of the line items the batch determined is empty (no stock). Deliveries are created using VL10A tcode. However I could trace some reasons for that.
    1. In Sales Order the line item is not confirmed for that date. Schedule lines are confirmed for future date.
    2. Deliveries are able to be created using VL10a transaction (even the future delvieries without stock confirmation)
    3. Automatic batch determination is run and empty batches are assigned. That means batch with no stock.
    4. For assigned batch, stock is zero (available quantity) and expiry date is in the past.
    5. For this item in delivery, the staging date is in the future and Planned GI is present.
    I want to fix:
    1. Why the delivery creation is not blocked for unconfirmed line items in Sales Order using VL10a tcode whereas it is blocked using VL01 tcode.
    2. How come empty batch is determined.
    Appreciate your response and thanks in advance.
    Regards,
    AK

    Hi,
    1. Why the delivery creation is not blocked for unconfirmed line items in Sales Order using VL10a tcode whereas it is blocked using VL01 tcode.
    - You may need to check OSS notes 113411 and in particular 355666
    2. How come empty batch is determined.
      - You may need to check the batch search strategy using transaction code VCH2 for the particular material.
    Regards

  • Warning message during batch determination while doing GR for process order

    Hi Experts,
    During delivery against process order for all SFGs and FGs, we are getting warning message u201CInvalid batch according to selection criteria in batch determinationu201D.
    Following settings maintained for batch determination in process order.
    Condition table for order/material type maintained
    Access sequence maintained for order/material type
    In strategy type above access sequence has been maintained. The common class and sort sequence created for all materials in the plant have also been assigned to this strategy type. In batch split changes allowed box has been checked and quantity proposal maintained as 1.
    In search procedure control maintained for order/material type. Search procedure has been assigned to all process order types and check activated.
    In spite of the above when GR for order is taking place , system is throwing warning message.
    GI of components is being done through backflush and without any warning message.
    Please advise how to ensure proper batch determination during GR against order.
    Regards
    Sm.

    Issue resolved by removing required indicators from characteristics which were not being valuated but were maintained in the class assigned to SFGs/FGs.
    Regards
    Sm.

  • Batch Determination at Delivery

    We assign Storage Location per Shipping Point.. for example, Shipping POint 1000 should get from SLoc 0001.
    In the warehouse, we have two storage locations, 0001 & 0002.
    When we do automatic batch determination, if there are no stocks in 0001, it will get available stocks in 0002, changing the storage location in the Delivery automatically.
    But, we don't want this to happen.  How can we limit batch check at storage location level? (e.g. in the example above, should look only at storage location 0001, the SLoc which is assigned to the Shipping Point)

    Hi,
    We can exclude or avoaid  the availability check at storage location level,
    OVZ9 >>> Select  check rule and check group combination >>> details
    Remove tickmark of No storage location inspection
    Then,
    IMG >>>> MM >>> Consumption based planning >>> Planing >>> Define Storage Location MRP per Plant
    Here put indicator - 1 (exclude storage location from MRP), in front of strorage location for which u want to avoaid batch stock availability.
    TRY AND SEE IS IT FULLFILL YOUR REQUIREMENTS
    Kapil

  • Automatic Batch Determination in Delivery

    Hello all,
    I need you help.
    business required that the batch of the high level item be automatically determined in the delivery document
    We acticated  1.Delivery item category for  Autom Batch Determ
    Activate the  item ctg for batch determ;
    Delivery item  cat assigned to the delivery type LF – usage CHSP
    in Delvery .. if the sales order type is Standared (OR) its working fine and doing batch determination automatically.
    But if the sales order type is custom (ZXXX) then its not automatically determining the Batch in Delivery,
    am i missing any configuaration linked to sales order type.Please let me know.
    Thanks & Regards,
    Sanju

    Hi Sanju,
    Have you assigned the batch search procedure to this custom order type?
    Please check in t-code v/c5.
    Please reward points if helpful.
    Regards
    Jean

  • Batch determination at delivery stage

    11.09.2010
    Hi friends, i want the batch to be determined at the delivery level not at the sales order.
    Should i update the "Allocate SD search Procedure /Activate check"? If its to be updated then in the combination of Sales Org / Dist Ch / Divn /Sales Doc typ /Search procedure / Check batch    what should be updated under the "Sales document type" column.  
    I have updated the delivery item category in the Acitvate Automatic Batch determination in SD".   Please advise.
    Regards,
    Uday

    If you want the batch to be determined in delivery , remove the Automatic batch determination from Sales Order item category and activate in Delivery item category ?.. Other than that , the basic configuration and all same as you mentioned ?.. The  sales order type only to be updated under " sales document column"...
    With Regards
    S.Siva

Maybe you are looking for

  • NumericStepper/ComboBox problems

    Hello. I have a learning interaction that utilizes NumericStepper component instances as well as ComboBox instances. The file was working fine until yesterday when all of a sudden the text field that displays users' selections no longer does so. Any

  • Help menu disconnects Elements 8

    Hi, rather than suffer with the problem I decided to find out what I can do about it, and hope you can help me. I have Elements 8 on mac. When I click on HELP and the drop down menu shows up, I click on one of the subjects and the program disconnects

  • Error message for profit center

    Hello, The requirement is that the user should not be able to save the sales order without entering the profit center at the item level. I have tried to make the profit center mandatory for a particualr company code:- 1.Sales - Item and double click

  • Problems printing from PC to MAC on wireless network

    I've just spent 3 hours trying to get my 3 Vista PCs to print to the printer that is connected to my iMAC. The iMAC is running Snow Leopard. The printer is a HP Deskjet F300 series and is connected to the iMAC via USB. The MAC and the printer work fi

  • How to transfer contacts from Windows 7.5 Mobile OS to IOS7

    Help needed, I recently bought a iphone 5C and am looking at options to trnasfer my contacts,pics etc from my old Nokia Lumina phone which runs windows 7.5 to my new iphone....thanks