FIFO check
Dear All,
In our system our previous consultants have activated FIFO for GI, whenever i try to post the GI system is proposing batches accordingly to their batch creation date.
In material master classfication view is not extended eventhough system is thriwing the batch with FIFO
1. Where the settings has been made, where should i check ?
2. If 2 batches are created on the same date system for one time proposing batch1(creation date 1.1.13) next time other batch batch2((creation date 1.1.13)) eventhough batch1 qty is not over
Please suggest
Hi
Check strategy types and sort rules configuration
Paths are as follows
SPRO>> LO general>> Batch management> define sort rules
where you can define sorting rules based on batch creation date characterstics
these sorting rules are used in strategy types
SPRO>> LO general>> Batch management>strategy types>>define IM strategy types or others
where in sorting filed sorting rules can be used.
Similar Messages
-
Material price based on FIFO basis
Hi SAPERS,
In sap material can be valuated by using moving average of Standard price. But my client requires at the time of GI the material cost should be charged on basis of FIFO invoice/ cost. In material master accounting view one FIFO check box is there is it useful for this requirement. Please provide me the solution.
Thanks in Advance,
prasadHi Venkat,
U cant get desired material price at the time of goods issue.
Because ur material price is updated in materail master as per goods receipt with different values.
So u will find only price as per FIFO valuation in MRF1.
I thk it will help u.
In doubt pls revert back.
Thanks and regards
Gitesh -
FIFO Valuation with Material Ledger !
Hi,
How do we accomplish FIFO Valuation using Material Ledger ?
We have activated the Material Ledger, with Single - Level Determination; Standard Price S. On execution of Single-Level Price Determination, we get the Periodic Unit Price -- which is the Weighted Average Price for the Receipts for the period involved.
I came across SAP Forums, which claim that Material Ledger is the FIFO Valuation on real-time basis. However, this doesn't seem to be true. The Goods Issued are assigned the Periodic Unit Price (calculated above -- i.e the Weighted Average Price ).
In addition, we have Configured the FIFO Balance Sheet Valuation Procedure, through the MM menu. The FIFO Value for the Material is giving weird results. Adding the total Inventory for all the Receipts till date and over-riding the period selection for Single Receipts. For monthly receipts, the system just gives the Weighted Average Price again.
The Business is expecting the FIFO valution for the Inventory Balance on Monthly Basis. ( We are using Material Ledger, so that we can roll-up this FIFO Valuation of the Raw Material ito Gross up into the Finished Product
-- ThanksHi Kenny ,
BASIC STEPS THAT CAN BE FOLLOWED FOR ENDING INVENTORY VALUATION :
Ending Inventory is valued as per FIFO calculated through following steps:
Run the price calculation (Txn: KSII) u2013 check that all auxiliary Cost centers are zero
Run Txn:MRF3 (summarization of documents for the FIFO calculation.)
Run MRF1 (calculation of FIFO)
Check if the FIFO calc. is correct via MR35
After ML run the ending inventory value should be equal to the value in MR35 and so balance amount not yet loaded to ending inventory through FIFO valuation is posted to consumption
Exception: If total receipts for a period is less than ending inventory quantity .In this case the EI is valued at weighted average
Please check wether the steps have been properly followed and the execption doesnot exists..
Also, hope your Price Determination is "3" and price control is "S" in Material Master..
Regards
Sarada -
Target VI stops before being commanded using shared variable
All,
I decided to post this in general since it deals mostly with shared variables however I am working with a RT target so feel free to move it to another forum.
I originally posted a problem I was having with the RT Module Getting Started example, regarding the 1950679023 error, and trouble shooting led me to create the simplest test project I could think of. (I know you all want a link to the VIs but my company does not allow me to access internet file sharing sites to upload data so bare with me.)
NOTE: This is NOT an RT project. Just deployed on an RT target.
In Project Explorer I have Host.vi under " My Computer " and Target.VI and 3 networked-published shared variables (call them A,B,C here for simplicity) with RT-FIFO checked, under my RT target.
Host.vi is a single while loop with a 0.5sec time delay express VI. The loop contains (along w/ the time delay) 1 numeric control wired to SV A, 1 numeric indicator wired to SV B, and finally a Stop button wired to SV C plus the conditional term (stop if True). SV A is configured as write, SV B as read, and SV C as write.
Target.vi is a single while loop with a 0.5sec time delay express VI. The loop contains (along w/ the time delay) a numeric add function wired to a constant double and SV A configured as read. Also, SV C is wired to the conditional term configured as read (stop if True). The VI adds the two numbers, one of which is controlled by the Host.vi using SV A, and sends the results to Host.vi using SV B until the Stop button is pressed on Host.vi and sent back to Target.vi using SV C.
I successfully ran this project (which included my always present 1950679023 error). Then changing no code but merely redeploying/running it again right after or through out the course of many other project deployments I get incorrect data on Host.vi. Basically sometimes it would work, sometimes it wouldn't; having changed NO code. First discovery was that Target.vi would automatically stop after running ~ 1sec since deploying/running on the target and before I could disconnect and open/run Host.vi. I then deployed/ran Target.vi with a probe on the wire between SV C and the conditional term and highlight execution running. After an average of 3 runs through the loop the SV C would automatically send out a True signal even though I never open/run Host.vi. How can shared variable C, which is write controlled by Host.vi, automatically change it's state like that when I never even open/run Host.vi?
Another interesting observation is, If I first open/run Host.vi and then deploy/run Target.vi, the program ALWAYS works. But those steps go against my limit understanding of running VIs with shared variables on a target, which I got from NI's RT Module Getting Started Guide? I am going to have a hard time developing anything useful with these shared variables if I can not get the LV RT Guide example and this simple VI working. Any help would be great.
Thanks
JD
P.S. I've noticed this error message a few times during deploying/running either the Host.vi or Target.vi. The error is not consistent; sometimes I see sometimes I don;t.:
error-2147220727 (Hex 0x80040309)
The client process cannot communicate with the configuration server process. If this problem persists please note the steps you performed that led to this error and contact technical support.
PXI-1045,PXI-8196 RT,PXI-4220 (slot 2),(2) PXI-6259 (slot 3 and 4),PXI-5152 (slot 5),PXI-2585 (slot 6),PXI-5404 (slot 7)
LV 8.2.1, RT 8.2, DAQmx 8.5, MAX 4.2, VISA 4.1,
Pharlap OS ver.12.0, PH_EXEC ver. 8.2Thanks for the responses, (sorry this is going to be long)
- First question is how do you initialize a shared variable (SV)? I don't have the DSC module, which I know has an initial value parameter. The SV is configured as a read and doesn't have any inputs, so am I missing something on the way to initialize it? I know the boolean defaults to False, which is good for my application. Also, right clicking on the SV doesn't bring up any obvious solution? Help if I am lost. Also, all my code is inside the loop (both the RT.vi and Host.vi), nothing is outside the loop.
- I think I learned something through some trial and error. I made this test VI project even simpler by just having an incremental counter using shift registers inside the RT.vi while loop. The results of that counter are sent out, by way of a network-published SV, to the Host.vi. This network-published SV is located under the target within the Project Explorer. I temporarily got rid of the boolean SV, which was used to stop both the RT.vi and Host.vi. It was that boolean SV that gave me all the problems.
This new test VI works consistently (also as a stand alone application, which was a first for me). My thoughts are that the issues had something to do with not "completely" removing all previous run instances of the VI and associated SVs/library from the RTs memory. I think I was getting old buffer data or SV corruption when, on my first test VI, would re-run the RT.vi and have the boolean SV inexplicitly switch states from False to True, even though the write controlled instance on Host.vi wasn't even running. I now undeploy everything (and check the Variable Manager) to make sure I have a clean sheet when re-running the VI. Now that brings up a question, is undeploying the only, or proper, way to clear the RT's memory?
Anywho, I reintroduced the boolean SV into this new edition of the test project (read instance on RT.vi and write instance on Host.vi, while "hosted?" under the target in the Project Explorer) and everything works (although I still get that 1950679023 error once in a while when running for the first time). Meaning, I deploy the RT.vi then disconnect, then run the Host.vi and get valid data, then I press stop and both VI's stop. I then clear out the RT memory (I think all of it?) using undeploy and then repeat. Doing this I get consistent, valid results. If this seems like a learning experience for me please let me know, I don't want something to "work" just by accident.
- To answer the second reply: 1) all the SVs where created under the target in the Project Explorer. Also, I have not unchecked auto-deploy or tried deploying manually, but will give it a try. That brings up a great point, most of NI's data on SVs is "technical specification" like and not very in depth for something so complex. I have not been able to find any "tips/tricks" or "best practices", like trying to deploy manually. Is it because SVs are still new?? Also, a frustrating thing is that NI's step by step tutorials treat SVs like they are simple and fool proof, but following their instructions to the T I get errors. They leave out all the little nuances of correctly working with SVs and so it creates a steeper learning curve. Enough of my rant.
Thanks again for the responses and any more help to come.
JD
PXI-1045,PXI-8196 RT,PXI-4220 (slot 2),(2) PXI-6259 (slot 3 and 4),PXI-5152 (slot 5),PXI-2585 (slot 6),PXI-5404 (slot 7)
LV 8.2.1, RT 8.2, DAQmx 8.5, MAX 4.2, VISA 4.1,
Pharlap OS ver.12.0, PH_EXEC ver. 8.2 -
Cost of material in sales order.
Dear SD Gurus,
1. How do I see that the cost of material captured in Sales order?
2. How do i check whether it's correctly following the FIFO method?
Regards,
Dsingh.Hello,
1. Cost of Material is visible if you insert SAP Standard Condition Type VPRS in Pricing Procedure. It will bring Cost of material from Material Master Record - Accounting Screen. +
2. Regarding FIFO, check this: http://help.sap.com/saphelp_47x200/helpdata/en/47/61071349f011d1894c0000e829fbbd/frameset.htm
Hope this helps,
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Sep 13, 2011 12:13 PM -
Dear All,
Please help me in the following
i want system to find the next empty storage bin..
The Requirement is for 250 stock
Lets say there is 100 stock in Storage Bin - XYZ and 150 stock in ABC Storage bin.
Is there a FIFO Strategy in which system will determine this values
regards
amey kulkarnicome on, use some more words.
.i want this at the time of LT06 transaction
what is this?
next empty bin ? does not make any sense for a stock removal (picking)
FIFO? there are 2 FIFO strategies available, FIFO and stringend FIFO.
check the link to the documentation
http://help.sap.com/erp2005_ehp_05/helpdata/DE/c6/f8457a4afa11d182b90000e829fbfe/frameset.htm -
Material form Vendor Checking By FIFO
Dear All,.
My company need checking material batch number from vendor when we do MIGO transaction as FIFO,what should I do for this required..?.
and thx for your help.
regards,.
harryHi RC,
When maintain ME01 it will ask the plant for the material which you maintian source list..
so, it will not allow the other plant to use the same source list..
If you want to create source list for another plant activate source list in Purasing--->with required plant..
then maintain..
Note: Source list check in Material master ---> plant specific data (Purchasing view of material master).
SAM -
How to check number of elements available in RT FIFO?
Hi,
Without using READ FIFO function is there a way to check the number of elements in RT FIFO? I am looking a function like the get queue status function VI.
Thanks a lot!
Regards,
Tom
Solved!
Go to Solution.RT FIFO Read and Write functions have had a "# elements" output since LabVIEW 8.2. You should be able to utilize that output to determine how many elements are left in the FIFO. If you have a version of LabVIEW previous to LabVIEW 8.2, you can utilize the attached VI to determine how many elements are left.
Regards,
Keith M.
Applications Engineer
Attachments:
fifo.vi 65 KB -
Clock domain crossing FIFO sanity check
Hi all,
I am having an issue with producing a one clock cycle wide pulse output. I have dealt with crossing clock domains before but I just want to make sure I am not doing anything wrong.
I have two clock domains that are mesochronous, both are 250MHz from two different external devices that are deskewed in a DCM.
I generate a 1 clock cycle wide pulse from clock domain 1 periodically. I need this pulse to cross the domain coherently into clock domain 2 so that the period remains the same. In other words the latency from crossing clock domains must have a a constant latency (the amount of latency does not matter as long as it is the same all the time).
I am using a coregen generated asynchronous block RAM FIFO. The write enable is the pulse output from clock domain 1 and the empty flag of the FIFO is the output pulse (except I negate it and register the output in an IOB FF clocked with clock domain 2s clock). The output FF is actually a FDCPE, since it is necessary on power up to send an asynchronous '1' to the device. Once the asynchronous '1' is outputted, it is cleared and never used again. I am guessing that an FDCPE primitive will act the same as a FF.
Here is the issue:
On power up, if it works, it will continue to work at all temperatures for as along as the system is powered on. If on power up it does not work, it will continue to not work for as long as the system is powered on. I am assuming this is a power-on phase issue. Would this have something to do with how I am crossing the clock domains or should I look elsewhere?
When I say it does not work I mean:
Clock domain 1 is from an ADC and clock domain 2 is from a device similar to a DAC. The output of the DAC feeds back into the ADC. When it does work, the output I create from the DAC is coherently read from the ADC. When it does not work, it looks as if the DAC output is started at different clock cycles (multiple phase shifts). This is why I am assuming that it is due to signal coherency, but we have used this scheme for crossing clock domains multiple times and it has always worked without any issues.
Sorry if this is not enough information.
ThanksI don't entirely understand the description of the problem you are seeing - we need more context for that. But I will address the clock crossing.
I don't see anything fundamentally wrong with the clock crossing mechanism you are describing. However, it is VERY expensive for what you are using it for. In fact, even though you are using a clock crossing FIFO, you aren't actually using the storage of the FIFO - you are just using the address counters and full/empty flag generation (which is implemented in fabric logic), and completely ignoring/wasting the RAM.
There are many simple circuits for doing this clock crossing. As long as you can ensure that you will never get one pulse less than 3 (maybe even 2) after the previous one, then the circuit shown below (a toggle event synchronizer) is simple cheap and effective
This circuit takes your pulse event on the source clock domain, converts it into a toggle event, which is then synchronized through a two stage synchronizer and then edge detected in the destination domain.
You don't say what tool you are using (Vivado or ISE) - in either tool it will need some constraints.
In Vivado, you should set the ASYNC_REG property on the two middle flip-flops
set_property ASYNC_REG TRUE [get_cells {signal_meta_reg signal_dst_reg}]
You will also need some sort of exception on the clock crossing (since all clocks in Vivado are related by default). My preferred one is
set_max_delay -datapath_only 4 -from [get_cells event_toggle_reg] -to [get_cells signal_meta_reg]
You should still use this even though both clocks are 4ns periods (so the requirement will end up being 4ns anyway) but the -datapath_only flag tells the tools not to analyze the clock insertion... Furthermore, on this synchronizer, a max_delay isn't technically needed (since there is only one signal being synchronized), so you could set the path as being false, but it is good habit to use this constraint anyway, since other synchronizers need it.
If you can't guarantee that there are 2 clocks between events, then you can use a simple Gray code counter on the source domain to count events, and send the count to the destination side, which will generate one output pulse for each count received - this is basically what the logic in the FIFO is doing, but without carrying around the useless RAM.
And, by the way, if you are going to stick to the FIFO, why not use a distributed RAM based FIFO - you won't need to waste the block RAM... If you make it 64x1, then you will only waste two LUTs for the useless RAM instead of an entire block RAM.
Not that this matters, but you say that the clocks are mesochronous - are they really? To be mesochronous, they need to derive from the same oscillator; they may go through very different paths, but they must come from the same frequency source. Merely both being 250MHz does not make them mesochronous (but, as I say, that doesn't matter for this clock crosser ).
As for the rest of it - I don't think the clock crossing is the source of your problem. Its vaguely possible that you are messing up the FIFO logic by giving it a pulse too close to the deassertion of the reset; the built-in FIFOs have a requirement that the WR_EN not be asserted within a handful of clocks after the deassertion of rst. But you say you are using the block RAM based one, which probably doesn't need this. So its probably not the clock crosser...
Avrum
-
Update kernel and recieved a "Machine check error"
I was on Vacation this last weekend but was finally able to update today. Upgrade seemd fine, issued reboot command and instead of my normal reboot I was greeted with "machine check error" flashing in my upper left hand corner. Syslinux never came up. I powered off manually and pulled the battery, subsequent reboot went off without a hitch.
pacman log
[2013-09-09 18:12] [PACMAN] Running 'pacman -Syyu'
[2013-09-09 18:12] [PACMAN] synchronizing package lists
[2013-09-09 18:12] [PACMAN] starting full system upgrade
[2013-09-09 18:13] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
[2013-09-09 18:13] [ALPM-SCRIPTLET] AMD : barcelona, bulldozer, kx, k10, piledriver
[2013-09-09 18:13] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge, haswell
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
[2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge (3.10.10-1 -> 3.11-1)
[2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge-headers (3.10.10-1 -> 3.11-1)
[2013-09-09 18:13] [ALPM-SCRIPTLET] rmmod: ERROR: Module nvidia is not currently loaded
[2013-09-09 18:13] [ALPM-SCRIPTLET] In order to use the new nvidia module, exit Xserver and unload it manually.
[2013-09-09 18:13] [PACMAN] upgraded nvidia-ck (325.15-5 -> 325.15-6)
[2013-09-09 18:13] [PACMAN] upgraded parallel (20130722-1 -> 20130822-1)
[2013-09-09 18:13] [PACMAN] upgraded portaudio (19_20111121-1 -> 19_20111121-2)
[2013-09-09 18:13] [PACMAN] upgraded weechat (0.4.1-2 -> 0.4.1-4)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.11.0-1-ck (squishy@ease) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 9 08:00:27 EDT 2013
[ 0.000000] Command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac11fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bac12000-0x00000000bad8dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bad8e000-0x00000000bad9bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad9c000-0x00000000bad9dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bad9e000-0x00000000bad9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bada0000-0x00000000bade7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bade8000-0x00000000baf2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baf2c000-0x00000000baf91fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf92000-0x00000000baf97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baf98000-0x00000000bafe7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafe8000-0x00000000baffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baffd000-0x00000000baffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC512/RC512, BIOS 06VQ.M024.20110212.SSH 02/12/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FC0000000 write-back
[ 0.000000] 6 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbaffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b0d000, 0x01b0dfff] PGTABLE
[ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE
[ 0.000000] BRK [0x01b0f000, 0x01b0ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
[ 0.000000] [mem 0x23fc00000-0x23fdfffff] page 2M
[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
[ 0.000000] [mem 0x23c000000-0x23fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbac11fff]
[ 0.000000] [mem 0x40200000-0xbabfffff] page 2M
[ 0.000000] [mem 0xbac00000-0xbac11fff] page 4k
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbad8e000-0xbad9bfff]
[ 0.000000] [mem 0xbad8e000-0xbad9bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbad9e000-0xbad9ffff]
[ 0.000000] [mem 0xbad9e000-0xbad9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbade8000-0xbaf2bfff]
[ 0.000000] [mem 0xbade8000-0xbaf2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbaf92000-0xbaf97fff]
[ 0.000000] [mem 0xbaf92000-0xbaf97fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafe8000-0xbaffcfff]
[ 0.000000] [mem 0xbafe8000-0xbaffcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x1fd18000-0x1fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000baffee18 0006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000baf9bd98 000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40, using 32 (20130517/tbfadt-522)
[ 0.000000] ACPI: DSDT 00000000baf84018 0866F (v01 SECCSD LH43STAR 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000bafe5e40 00040
[ 0.000000] ACPI: APIC 00000000baffdf18 000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000bafe6d18 00038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[ 0.000000] ACPI: SLIC 00000000baf9cc18 00176 (v01 SECCSD LH43STAR 06222004 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000bafe6c98 0003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000baf91018 00A1D (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf90018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf9a018 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf98018 011E8 (v01 OptRef OptTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbac11fff]
[ 0.000000] node 0: [mem 0xbad8e000-0xbad9bfff]
[ 0.000000] node 0: [mem 0xbad9e000-0xbad9ffff]
[ 0.000000] node 0: [mem 0xbade8000-0xbaf2bfff]
[ 0.000000] node 0: [mem 0xbaf92000-0xbaf97fff]
[ 0.000000] node 0: [mem 0xbafe8000-0xbaffcfff]
[ 0.000000] node 0: [mem 0x100000000-0x23fdfffff]
[ 0.000000] On node 0 totalpages: 2074398
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 157 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 760193 pages, LIFO batch:31
[ 0.000000] Normal zone: 20472 pages used for memmap
[ 0.000000] Normal zone: 1310208 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbac12000-0xbad8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbad9c000-0xbad9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbada0000-0xbade7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf2c000-0xbaf91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf98000-0xbafe7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaffd000-0xbaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s84096 r8192 d22400 u131072
[ 0.000000] pcpu-alloc: s84096 r8192 d22400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041826
[ 0.000000] Kernel command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8071168K/8297592K available (4912K kernel code, 725K rwdata, 1676K rodata, 1104K init, 1260K bss, 226424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:1192 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1995.468 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.22 BogoMIPS (lpj=6651560)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000051] Security Framework initialized
[ 0.000058] AppArmor: AppArmor disabled by boot time parameter
[ 0.000069] Mount-cache hash table entries: 256
[ 0.000253] Initializing cgroup subsys memory
[ 0.000263] Initializing cgroup subsys devices
[ 0.000265] Initializing cgroup subsys freezer
[ 0.000267] Initializing cgroup subsys net_cls
[ 0.000268] Initializing cgroup subsys blkio
[ 0.000270] Initializing cgroup subsys bfqio
[ 0.000294] CPU: Physical Processor ID: 0
[ 0.000295] CPU: Processor Core ID: 0
[ 0.000300] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000303] mce: CPU supports 9 MCE banks
[ 0.000318] CPU0: Thermal monitoring enabled (TM1)
[ 0.000330] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.000467] Freeing SMP alternatives memory: 20K (ffffffff819cb000 - ffffffff819d0000)
[ 0.001938] ACPI: Core revision 20130517
[ 0.008675] ACPI: All ACPI Tables successfully acquired
[ 0.016462] ftrace: allocating 19779 entries in 78 pages
[ 0.027603] Switched APIC routing to physical flat.
[ 0.028009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061003] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[ 0.061011] TSC deadline timer enabled
[ 0.061026] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.061034] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.061036] ... version: 3
[ 0.061037] ... bit width: 48
[ 0.061038] ... generic registers: 4
[ 0.061040] ... value mask: 0000ffffffffffff
[ 0.061041] ... max period: 0000ffffffffffff
[ 0.061042] ... fixed-purpose events: 3
[ 0.061043] ... event mask: 000000070000000f
[ 0.084503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.071127] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 0.164288] Brought up 8 CPUs
[ 0.164293] smpboot: Total of 8 processors activated (31940.80 BogoMIPS)
[ 0.172724] devtmpfs: initialized
[ 0.174171] PM: Registering ACPI NVS region [mem 0xbaf2c000-0xbaf91fff] (417792 bytes)
[ 0.174179] PM: Registering ACPI NVS region [mem 0xbaf98000-0xbafe7fff] (327680 bytes)
[ 0.175128] RTC time: 1:14:39, date: 09/10/13
[ 0.175188] NET: Registered protocol family 16
[ 0.175350] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.175353] ACPI: bus type PCI registered
[ 0.175355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175429] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.175432] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.185354] PCI: Using configuration type 1 for base access
[ 0.186084] bio: create slab <bio-0> at 0
[ 0.186285] ACPI: Added _OSI(Module Device)
[ 0.186287] ACPI: Added _OSI(Processor Device)
[ 0.186289] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.186291] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.187915] ACPI: EC: Look up EC in DSDT
[ 0.189513] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.239236] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.241431] ACPI: SSDT 00000000badba718 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.241847] ACPI: Dynamic OEM Table Load:
[ 0.241850] ACPI: SSDT (null) 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.252823] ACPI: SSDT 00000000badbba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.253271] ACPI: Dynamic OEM Table Load:
[ 0.253273] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266019] ACPI: SSDT 00000000badb9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.266428] ACPI: Dynamic OEM Table Load:
[ 0.266430] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 1.207371] ACPI: Interpreter enabled
[ 1.207386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 1.207404] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.207406] ACPI: Using IOAPIC for interrupt routing
[ 1.207438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.207580] ACPI: No dock devices found.
[ 1.221274] ACPI: Power Resource [FN00] (off)
[ 1.221369] ACPI: Power Resource [FN01] (off)
[ 1.222064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.222103] \_SB_.PCI0:_OSC invalid UUID
[ 1.222105] _OSC request data:1 8 0
[ 1.222659] PCI host bridge to bus 0000:00
[ 1.222663] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.222665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.222668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.222670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.222672] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.222674] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.222676] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.222678] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.222680] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.222682] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.222684] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 1.222686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.222695] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.222797] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 1.222833] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.222921] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 1.222933] pci 0000:00:02.0: reg 0x10: [mem 0xf5400000-0xf57fffff 64bit]
[ 1.222941] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.222951] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[ 1.223070] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.223097] pci 0000:00:16.0: reg 0x10: [mem 0xf760a000-0xf760a00f 64bit]
[ 1.223179] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.223280] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.223304] pci 0000:00:1a.0: reg 0x10: [mem 0xf7608000-0xf76083ff]
[ 1.223402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.223495] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.223514] pci 0000:00:1b.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
[ 1.223588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.223678] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.223764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.223823] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.223866] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.223952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.224010] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.224050] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.224135] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.224238] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.224262] pci 0000:00:1d.0: reg 0x10: [mem 0xf7607000-0xf76073ff]
[ 1.224360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.224451] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 1.224646] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.224668] pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
[ 1.224677] pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
[ 1.224686] pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
[ 1.224695] pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
[ 1.224704] pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
[ 1.224714] pci 0000:00:1f.2: reg 0x24: [mem 0xf7606000-0xf76067ff]
[ 1.224763] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.224847] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.224866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7605000-0xf76050ff 64bit]
[ 1.224889] pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
[ 1.225036] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030200
[ 1.225046] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 1.225055] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.225065] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 1.225072] pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 1.225079] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
[ 1.232978] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.232986] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.232994] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.233003] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.233136] pci 0000:02:00.0: [8086:0087] type 00 class 0x028000
[ 1.233183] pci 0000:02:00.0: reg 0x10: [mem 0xf6c00000-0xf6c01fff 64bit]
[ 1.233407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.243003] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.243013] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.243022] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
[ 1.243037] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.243204] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 1.243274] pci 0000:03:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 1.243396] pci 0000:03:00.0: reg 0x18: [mem 0xe2c04000-0xe2c04fff 64bit pref]
[ 1.243467] pci 0000:03:00.0: reg 0x20: [mem 0xe2c00000-0xe2c03fff 64bit pref]
[ 1.243797] pci 0000:03:00.0: supports D1 D2
[ 1.243799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.253026] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.253036] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 1.253045] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
[ 1.253060] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.253163] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 1.253193] pci 0000:04:00.0: reg 0x10: [mem 0xf5800000-0xf5801fff 64bit]
[ 1.253333] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.263010] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.263020] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 1.263029] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
[ 1.263043] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.263086] pci_bus 0000:00: on NUMA node 0
[ 1.263130] \_SB_.PCI0:_OSC invalid UUID
[ 1.263131] _OSC request data:1 1f 0
[ 1.263135] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.263137] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.263659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.263721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.263779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.263838] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 1.263896] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.263956] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.264015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 1.264073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 1.264724] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.264732] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.264797] Found 1 acpi root devices
[ 1.264842] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.264936] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.264940] vgaarb: loaded
[ 1.264941] vgaarb: bridge control possible 0000:00:02.0
[ 1.264981] PCI: Using ACPI for IRQ routing
[ 1.266623] PCI: pci_cache_line_size set to 64 bytes
[ 1.266695] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.266697] e820: reserve RAM buffer [mem 0xbac12000-0xbbffffff]
[ 1.266700] e820: reserve RAM buffer [mem 0xbad9c000-0xbbffffff]
[ 1.266702] e820: reserve RAM buffer [mem 0xbada0000-0xbbffffff]
[ 1.266705] e820: reserve RAM buffer [mem 0xbaf2c000-0xbbffffff]
[ 1.266706] e820: reserve RAM buffer [mem 0xbaf98000-0xbbffffff]
[ 1.266708] e820: reserve RAM buffer [mem 0xbaffd000-0xbbffffff]
[ 1.266710] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[ 1.266803] NetLabel: Initializing
[ 1.266805] NetLabel: domain hash size = 128
[ 1.266806] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.266821] NetLabel: unlabeled traffic allowed by default
[ 1.266851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.266857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.268893] Switched to clocksource hpet
[ 1.273524] pnp: PnP ACPI init
[ 1.273541] ACPI: bus type PNP registered
[ 1.273643] system 00:00: [io 0x06a4] has been reserved
[ 1.273646] system 00:00: [io 0x06a0] has been reserved
[ 1.273650] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.273660] pnp 00:01: [dma 4]
[ 1.273681] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.273705] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.273820] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.273850] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.273897] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.273900] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.273902] system 00:05: [io 0xffff] has been reserved
[ 1.273904] system 00:05: [io 0xffff] has been reserved
[ 1.273907] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 1.273909] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.273911] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.273913] system 00:05: [io 0x0a00-0x0a03] has been reserved
[ 1.273915] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.273918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.273966] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.274009] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.274013] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.274065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.274118] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 1.274348] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.274351] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.274353] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.274355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.274358] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.274360] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.274362] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.274364] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.274367] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.274369] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.274372] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 1.274375] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.274919] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 1.274921] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 1.274924] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.274936] pnp: PnP ACPI: found 12 devices
[ 1.274937] ACPI: bus type PNP unregistered
[ 1.281089] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.281093] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.281097] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.281100] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.281104] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.281108] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.281114] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
[ 1.281118] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.281125] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.281129] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 1.281135] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
[ 1.281140] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.281147] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.281150] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 1.281156] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
[ 1.281161] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.281460] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.281462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.281464] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.281466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.281468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.281470] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.281472] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.281474] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.281476] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.281478] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
[ 1.281480] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.281482] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.281484] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff]
[ 1.281486] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.281488] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.281490] pci_bus 0000:02: resource 1 [mem 0xf6c00000-0xf75fffff]
[ 1.281492] pci_bus 0000:02: resource 2 [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.281494] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.281496] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf6bfffff]
[ 1.281498] pci_bus 0000:03: resource 2 [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.281500] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.281502] pci_bus 0000:04: resource 1 [mem 0xf5800000-0xf61fffff]
[ 1.281504] pci_bus 0000:04: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.281541] NET: Registered protocol family 2
[ 1.281696] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.281865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.282015] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.282036] TCP: reno registered
[ 1.282039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.282068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.282163] NET: Registered protocol family 1
[ 1.282176] pci 0000:00:02.0: Boot video device
[ 1.529060] PCI: CLS 64 bytes, default 64
[ 1.529098] Unpacking initramfs...
[ 1.590479] Freeing initrd memory: 2972K (ffff88001fd18000 - ffff88001ffff000)
[ 1.591336] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.591340] software IO TLB [mem 0xb6c12000-0xbac12000] (64MB) mapped at [ffff8800b6c12000-ffff8800bac11fff]
[ 1.591697] Scanning for low memory corruption every 60 seconds
[ 1.592068] audit: initializing netlink socket (disabled)
[ 1.592079] type=2000 audit(1378775680.569:1): initialized
[ 1.605419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.606685] zbud: loaded
[ 1.606816] VFS: Disk quotas dquot_6.5.2
[ 1.606867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.607049] msgmni has been set to 15769
[ 1.607262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.607320] io scheduler noop registered (default)
[ 1.607324] io scheduler deadline registered
[ 1.607360] io scheduler cfq registered
[ 1.607365] io scheduler bfq registered
[ 1.607452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.607633] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.607648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.607731] intel_idle: MWAIT substates: 0x21120
[ 1.607733] intel_idle: v0.4 model 0x2A
[ 1.607734] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.607793] GHES: HEST is not enabled!
[ 1.607848] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.608292] Linux agpgart interface v0.103
[ 1.608376] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 1.611674] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.611689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.611796] mousedev: PS/2 mouse device common for all mice
[ 1.611968] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.611998] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.612007] Intel P-state driver initializing.
[ 1.612017] Intel pstate controlling: cpu 0
[ 1.612032] Intel pstate controlling: cpu 1
[ 1.612043] Intel pstate controlling: cpu 2
[ 1.612054] Intel pstate controlling: cpu 3
[ 1.612065] Intel pstate controlling: cpu 4
[ 1.612076] Intel pstate controlling: cpu 5
[ 1.612089] Intel pstate controlling: cpu 6
[ 1.612100] Intel pstate controlling: cpu 7
[ 1.612312] cpuidle: using governor ladder
[ 1.612573] cpuidle: using governor menu
[ 1.612636] drop_monitor: Initializing network drop monitor service
[ 1.612712] TCP: cubic registered
[ 1.612809] NET: Registered protocol family 10
[ 1.612992] NET: Registered protocol family 17
[ 1.613001] Key type dns_resolver registered
[ 1.613275] PM: Hibernation image not present or could not be loaded.
[ 1.613285] registered taskstats version 1
[ 1.613900] Magic number: 13:40:205
[ 1.613944] acpi device:2d: hash matches
[ 1.613991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.614015] rtc_cmos 00:06: setting system clock to 2013-09-10 01:14:41 UTC (1378775681)
[ 1.614893] Freeing unused kernel memory: 1104K (ffffffff818b7000 - ffffffff819cb000)
[ 1.614895] Write protecting the kernel read-only data: 8192k
[ 1.619318] Freeing unused kernel memory: 1220K (ffff8800014cf000 - ffff880001600000)
[ 1.620313] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
[ 1.620314] BFS CPU scheduler v0.441 by Con Kolivas.
[ 1.627488] systemd-udevd[77]: starting version 204
[ 1.629471] SCSI subsystem initialized
[ 1.630602] ACPI: bus type ATA registered
[ 1.630697] libata version 3.00 loaded.
[ 1.631357] ahci 0000:00:1f.2: version 3.0
[ 1.631500] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.642171] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0WARNINGx5 impl SATA mode
[ 1.642175] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.642181] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.649744] scsi0 : ahciWARNING
[ 1.650013] scsi1 : ahci
[ 1.650141] scsi2 : ahci
[ 1.650269] scsi3 : ahci
[ 1.650401] scsi4 : ahci
[ 1.650493] scsi5 : ahci
[ 1.650686] ata1: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606100 irq 41
[ 1.650690] ata2: DUMMY
[ 1.650694] ata3: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606200 irq 41
[ 1.650696] ata4: DUMMY
[ 1.650698] ata5: DUMMY
[ 1.650700] ata6: DUMMY
[ 1.968795] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.968841] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.969674] ata1.00: ATA-9: M4-CT256M4SSD2, 010G, max UDMA/100
[ 1.969683] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.970728] ata1.00: configured for UDMA/100
[ 1.970980] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 010G PQ: 0 ANSI: 5
[ 1.971592] ata3.00: ATAPI: TSSTcorp DVDWBD TS-LB23A, SC01, max UDMA/100
[ 1.972317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.972530] sd 0:0:0:0: [sda] Write Protect is off
[ 1.972535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.972581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.972980] ata3.00: configured for UDMA/100
[ 1.974516] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.975127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.976456] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD TS-LB23A SC01 PQ: 0 ANSI: 5
[ 1.979211] ACPI: bus type USB registered
[ 1.979276] usbcore: registered new interface driver usbfs
[ 1.979339] usbcore: registered new interface driver hub
[ 1.979451] usbcore: registered new device driver usb
[ 1.980016] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.980024] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.980224] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.980231] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.980237] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.980244] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.980251] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.980257] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 1.980264] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1.980271] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 1.980520] xHCI xhci_add_endpoint called for root hub
[ 1.980523] xHCI xhci_check_bandwidth called for root hub
[ 1.980554] hub 1-0:1.0: USB hub found
[ 1.980561] hub 1-0:1.0: 2 ports detected
[ 1.980645] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.980666] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.983135] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.983140] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.983305] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.983767] xHCI xhci_add_endpoint called for root hub
[ 1.983769] xHCI xhci_check_bandwidth called for root hub
[ 1.983799] hub 2-0:1.0: USB hub found
[ 1.983808] hub 2-0:1.0: 2 ports detected
[ 2.042830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.075045] ehci-pci: EHCI PCI platform driver
[ 2.075169] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.075177] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.075185] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.075200] ehci-pci 0000:00:1a.0: debug port 2
[ 2.079109] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.079130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7608000
[ 2.088648] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.089496] hub 3-0:1.0: USB hub found
[ 2.089505] hub 3-0:1.0: 2 ports detected
[ 2.089935] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.089946] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.089954] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.089976] ehci-pci 0000:00:1d.0: debug port 2
[ 2.093871] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.093888] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7607000
[ 2.101986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.102116] hub 4-0:1.0: USB hub found
[ 2.102121] hub 4-0:1.0: 2 ports detected
[ 2.134853] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.199793] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.201658] systemd[1]: Set hostname to <watson>.
[ 2.268492] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 2.268851] systemd[1]: Starting Collect Read-Ahead Data...
[ 2.269341] systemd[1]: Starting Replay Read-Ahead Data...
[ 2.269709] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.269820] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.269852] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 2.269873] systemd[1]: Starting Syslog Socket.
[ 2.269927] systemd[1]: Listening on Syslog Socket.
[ 2.269946] systemd[1]: Starting Remote File Systems.
[ 2.269961] systemd[1]: Reached target Remote File Systems.
[ 2.269975] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.270017] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.270038] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.270074] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.270088] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.270126] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.270140] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.270168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.270210] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.270352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.270370] systemd[1]: Starting Encrypted Volumes.
[ 2.270384] systemd[1]: Reached target Encrypted Volumes.
[ 2.270402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.270449] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.270464] systemd[1]: Starting Paths.
[ 2.270478] systemd[1]: Reached target Paths.
[ 2.270494] systemd[1]: Starting Journal Socket.
[ 2.270543] systemd[1]: Listening on Journal Socket.
[ 2.270567] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.270849] systemd[1]: Mounting Debug File System...
[ 2.271238] systemd[1]: Starting Create static device nodes in /dev...
[ 2.271494] systemd-readahead[136]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 2.271888] systemd[1]: Starting Journal Service...
[ 2.272443] systemd[1]: Started Journal Service.
[ 2.272532] systemd[1]: Mounting Huge Pages File System...
[ 2.273048] systemd[1]: Starting udev Kernel Socket.
[ 2.273080] systemd[1]: Listening on udev Kernel Socket.
[ 2.273155] systemd[1]: Starting udev Control Socket.
[ 2.273189] systemd[1]: Listening on udev Control Socket.
[ 2.273294] systemd[1]: Starting udev Coldplug all Devices...
[ 2.273733] systemd[1]: Starting Swap.
[ 2.273754] systemd[1]: Reached target Swap.
[ 2.273772] systemd[1]: Expecting device dev-disk-by\x2duuid-06ee03bc\x2dca64\x2d406d\x2dbe45\x2db2b645137e08.device...
[ 2.273786] systemd[1]: Expecting device dev-disk-by\x2duuid-5aedfe61\x2d50f2\x2d47c7\x2d82ac\x2d79930ee37462.device...
[ 2.294504] systemd-sysctl[154]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 2.298123] EXT4-fs (sda5): re-mounted. Opts: discard
[ 2.306988] systemd-udevd[161]: starting version 204
[ 2.330645] FS-Cache: Loaded
[ 2.344801] ACPI: Requesting acpi_cpufreq
[ 2.345279] wmi: Mapper loaded
[ 2.345847] RPC: Registered named UNIX socket transport module.
[ 2.345849] RPC: Registered udp transport module.
[ 2.345850] RPC: Registered tcp transport module.
[ 2.345851] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.355607] FS-Cache: Netfs 'nfs' registered for caching
[ 2.358082] ACPI: Battery Slot [BAT1] (battery present)
[ 2.358579] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.358604] ACPI: Lid Switch [LID0]
[ 2.359113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.359119] ACPI: Power Button [PWRB]
[ 2.359456] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.359461] ACPI: Sleep Button [SLPB]
[ 2.359772] ACPI: AC Adapter [ADP1] (off-line)
[ 2.360090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.360096] ACPI: Power Button [PWRF]
[ 2.374300] ACPI: Fan [FAN0] (off)
[ 2.374551] ACPI: Fan [FAN1] (off)
[ 2.375124] ACPI: Invalid active2 threshold
[ 2.377341] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 2.377349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377354] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377358] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377364] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377368] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377377] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377383] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.378357] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378361] ACPI: Thermal Zone [TZ00] (52 C)
[ 2.383745] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 2.383753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.383911] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.383955] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.386775] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.388164] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.388178] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.388494] r8169 0000:03:00.0: irq 51 for MSI/MSI-X
[ 2.392549] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90004622000, e8:11:32:25:4e:78, XID 0c200000 IRQ 51
[ 2.392554] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.394650] cfg80211: Calling CRDA to update world regulatory domain
[ 2.395234] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.396342] [drm] Initialized drm 1.1.0 20060810
[ 2.397019] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.397023] ACPI: Thermal Zone [TZ01] (52 C)
[ 2.403428] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.403432] Copyright(c) 2003-2013 Intel Corporation
[ 2.403550] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.403625] iwlwifi 0000:02:00.0: irq 52 for MSI/MSI-X
[ 2.413574] iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
[ 2.414850] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 2.459516] samsung_laptop: detected SABI interface: SwSmi@
[ 2.459520] samsung_laptop: Backlight controlled by ACPI video driver
[ 2.475073] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.475258] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.475342] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.479302] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.479307] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.479310] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.479312] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.479315] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
[ 2.479382] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.486443] [drm] Memory usable by graphics device = 2048M
[ 2.486454] i915 0000:00:02.0: setting latency timer to 64
[ 2.510361] iTCO_vendor_support: vendor-support=0
[ 2.510974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.511063] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.511169] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.515715] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.522955] hub 3-1:1.0: USB hub found
[ 2.523029] hub 3-1:1.0: 6 ports detected
[ 2.552940] i915 0000:00:02.0: irq 54 for MSI/MSI-X
[ 2.552952] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.552953] [drm] Driver supports precise vblank timestamp query.
[ 2.552974] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 2.553071] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 2.554259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.582133] [drm] Wrong MCH_SSKPD value: 0x17050407
[ 2.582136] [drm] This can cause pipe underruns and display issues.
[ 2.582137] [drm] Please upgrade your BIOS to fix this.
[ 2.591839] tsc: Refined TSC clocksource calibration: 1995.467 MHz
[ 2.597052] fbcon: inteldrmfb (fb0) is primary device
[ 2.631810] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.691536] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 2.697765] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 2.708392] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
[ 2.726771] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.732165] systemd-logind[678]: Watching system buttons on /dev/input/event4 (Power Button)
[ 2.732251] systemd-logind[678]: Watching system buttons on /dev/input/event2 (Power Button)
[ 2.732373] systemd-logind[678]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 2.732460] systemd-logind[678]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 2.733090] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.755620] hub 4-1:1.0: USB hub found
[ 2.755733] hub 4-1:1.0: 6 ports detected
[ 2.821911] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.108586] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
[ 3.308514] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 3.322812] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[ 3.395720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 3.568352] Console: switching to colour frame buffer device 170x48
[ 3.574903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.574905] i915 0000:00:02.0: registered panic notifier
[ 3.575357] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.593033] Switched to clocksource tsc
[ 3.594635] media: Linux media interface: v0.10
[ 3.601441] Linux video capture interface: v2.00
[ 3.607344] uvcvideo: Found UVC 1.00 device WebCam SCB-1110M (1210:0909)
[ 3.612805] input: WebCam SCB-1110M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input10
[ 3.612886] usbcore: registered new interface driver uvcvideo
[ 3.612889] USB Video Class driver (1.1.1)
[ 3.624759] acpi device:47: registered as cooling_device10
[ 3.628631] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.628749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input11
[ 3.631116] acpi device:51: registered as cooling_device11
[ 3.631300] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.631373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 3.631455] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.645951] i2400m_usb 4-1.3:1.0: WiMAX interface wmx0 (64:d4:da:24:b5:c0) ready
[ 3.653985] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.654187] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 3.874277] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.874474] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 3.963960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.328298] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.107250] i2400m_usb 4-1.3:1.0: firmware interface version 9.3.2
[ 7.117012] usbcore: registered new interface driver i2400m_usb
[ 7.141746] wlan0: authenticate with 00:22:6b:70:c5:e9
[ 7.151167] wlan0: send auth to 00:22:6b:70:c5:e9 (try 1/3)
[ 7.197933] wlan0: authenticated
[ 7.200356] wlan0: associate with 00:22:6b:70:c5:e9 (try 1/3)
[ 7.201891] wlan0: RX AssocResp from 00:22:6b:70:c5:e9 (capab=0x11 status=0 aid=2)
[ 7.205520] wlan0: associated
[ 7.205524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.681425] bbswitch: version 0.7
[ 16.681440] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 16.681445] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 16.681454] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 16.681520] bbswitch: detected an Optimus _DSM function
[ 16.681556] bbswitch: disabling discrete graphics
[ 16.681559] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 16.711802] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 16.711812] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[ 41.636100] fuse init (API version 7.22)
[ 440.485588] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 440.507912] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 453.967678] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 453.984936] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
I have never seen this error and my googlefu return issues with overclocking which I am not doing. Any info on the subject I'd love to hear.
Cheers.
EDIT: Was only happening when issuing 'systemctl reboot' so I switched back to 3.10.10-1-ARCH and reboot command now works.
Last edited by doug piston (2013-09-10 02:05:56)Well, I can tell you that this kind of error is not OS related, but rather a HW thing. It happens where there is a general detection of something going wrong. Sometimes it can happen randomly and might not be an indication of a problem. But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors.
Unfortunately I don't really know what to do about such things except give you machine a proper inspection. But if things are working fine, and continue to do so, I wouldn't worry about it. If it becomes a regular occurance, then I'd worry. -
FIFO based pricing issue on sales orders!
This is the situations :
All setups in the comany are for FIFO. Item Level, Item Group Level, and Company Level.
1. We purchased 1 item1 for 125 dollars. PO invoice completed. First one in FIFO layer.
2. purchased 1 more of same item1 for 150 dollars. PO Invoice completed. Second in FIFO layer.
3. We want to sell above items to Customer1. Customer1 has price list set to - Last Evaluated Price.
4. Ran Inventory Audit Report to update the price list LastEvaluatedPrice.
5. Start order for Customer1 and add 1 item1 to order -
Price = 125 <== OK.
Make the above quantity 2 or add another line for item1.
Error : Price=125 <=== NOT OK, should be 125 for first item and 125 for second item (same item).
6. Run Audit Report again and repeat step 5.
Error : No change. Same as step results. That is price=125 instead of 150.
NOTE: Customer could end up in loss based on above pricing.
7. Yes there are workarounds :
7.1 Run Inventory Valuation Report for the item with MovingAverage as the price. Then the evaluated price is right.
7.2 Right click or run a query and get the price in layers and then calculate your own.
Note: No workarounds are good for customer. They and their staff do no want to open additional windows or run queries etc.
QUESTION: Why is FIFO pricing not working for Sales Order?
Note: Why would anyone use FIFO? It could give them big loss or big profits all unintended?
Please help? Is this FIFO problem, or my setup problem or something I do not understand?
Thanks and Cheers!Hi Syed,
Open sales order select that item and right click in unit price column and select "last prices" option. Then Last prices form will open just deselect BP Code check box and select vendor. you can see there prices in detail level just double click on row which price you want.
Thanks
Sachin -
Bank Statement using FIFO method
Hi all,
Thanks in advance for your possible help. I am facing the following issue.
All debit and credit entries on a customers account have to be cleared automatically on the bank statement according to FIFO procedure, that is credit entries on a customers account will be cleared against the oldest open invoice. The open items will be automatically matched by the system based on available credit.
Does anyone have had a similar issue? I have already check OSS notes but no answer found.
ThanksHi R. Benavides,
I have the same business requirement. I was initially looking to use a developed interpretation algorithm (see SAP Note 597428) or directly coding the logic within the bank user exit FEB00001 (SMOD). However, I have discovered that as the electronic bank statement effectively uses F-28; it should be possible to populate the "distribute age" field (RF05A-XFIFO) with "X" using Search strings (that I am using to find Customer numbers).
If you are not using the bank statement search string functionality, you should also be able to populate, FEBEP-FNAM1 with RF05A-XFIFO and FEBEP-FVAL1 with X using the bank user exit FEB00001
Cheers
Jayson Dahya
HP NZ -
FIFO Underruns in newer versions of Linux using the Ivy Bridge cpus
I have been getting consistent results from my Lenovo Z580 where an error will apear when upgrading to a newer version of linux past 3.15.8. More specifically a "[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun". This also includes transcoder B.
I found the bug report https://bugs.archlinux.org/task/40952?p … sort2=desc which near to the bottom of the page someone has stated building the kernel from git fixes the issue. There was aslo some reports on updating the bios to solve the issue but on the bios I have is current based on the lenovo support site http://support.lenovo.com/us/en/product … s/DS100928.
lscpu info:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 58
Model name: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Stepping: 9
CPU MHz: 1210.253
CPU max MHz: 3100.0000
CPU min MHz: 1200.0000
BogoMIPS: 4990.71
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072K
NUMA node0 CPU(s): 0-3
lspci info
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 2200 (rev c4)
lsmod info
Module Size Used by
fuse 84249 3
ctr 3927 2
ccm 8278 2
xt_tcpudp 3207 3
ipt_MASQUERADE 2250 1
ip6t_rpfilter 1740 1
ip6t_REJECT 3980 18
ipt_REJECT 2505 20
xt_conntrack 3425 7
ebtable_nat 1916 0
ebtable_filter 1927 0
ebtable_broute 1493 0
bridge 100134 1 ebtable_broute
stp 1653 1 bridge
llc 3729 2 stp,bridge
ebtables 24586 3 ebtable_broute,ebtable_nat,ebtable_filter
ip6table_raw 1352 1
ip6table_mangle 1620 1
ip6table_filter 1556 1
ip6table_security 1372 1
ip6table_nat 3585 1
nf_conntrack_ipv6 9661 5
nf_defrag_ipv6 26126 1 nf_conntrack_ipv6
nf_nat_ipv6 3736 1 ip6table_nat
ip6_tables 17729 5 ip6table_filter,ip6table_mangle,ip6table_security,ip6table_nat,ip6table_raw
iptable_raw 1348 1
iptable_mangle 1616 1
iptable_filter 1552 1
iptable_security 1368 1
iptable_nat 3454 1
nf_conntrack_ipv4 9474 4
nf_defrag_ipv4 1499 1 nf_conntrack_ipv4
nf_nat_ipv4 3728 1 iptable_nat
nf_nat 13368 5 ipt_MASQUERADE,nf_nat_ipv4,nf_nat_ipv6,ip6table_nat,iptable_nat
nf_conntrack 80172 9 ipt_MASQUERADE,nf_nat,nf_nat_ipv4,nf_nat_ipv6,xt_conntrack,ip6table_nat,iptable_nat,nf_conntrack_ipv4,nf_conntrack_ipv6
ip_tables 18115 5 iptable_security,iptable_filter,iptable_mangle,iptable_nat,iptable_raw
x_tables 17344 17 iptable_security,ip6table_filter,ip6table_mangle,ip6t_rpfilter,ip_tables,xt_tcpudp,ipt_MASQUERADE,ip6table_security,xt_conntrack,iptable_filter,ip6table_raw,ebtables,ipt_REJECT,iptable_mangle,ip6_tables,iptable_raw,ip6t_REJECT
uvcvideo 74983 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
arc4 2064 2
videodev 123032 2 uvcvideo,videobuf2_core
coretemp 6388 0
rts5139 313272 0
iwldvm 170735 0
media 12611 2 uvcvideo,videodev
hwmon 3346 1 coretemp
joydev 10367 0
mousedev 10912 0
snd_hda_codec_hdmi 40396 1
led_class 3611 1 iwldvm
intel_rapl 12460 0
x86_pkg_temp_thermal 7311 0
mac80211 495361 1 iwldvm
intel_powerclamp 9442 0
kvm_intel 135528 0
snd_hda_codec_realtek 54803 1
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
snd_hda_intel 22831 4
snd_hda_controller 22975 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
kvm 408583 1 kvm_intel
iTCO_wdt 5663 0
psmouse 94918 0
iTCO_vendor_support 1929 1 iTCO_wdt
pcspkr 2059 0
microcode 17157 0
serio_raw 5073 0
snd_hwdep 6652 1 snd_hda_codec
evdev 11784 14
snd_pcm 83207 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
ideapad_laptop 10439 0
ac 3595 0
thermal 9103 0
sparse_keymap 3242 1 ideapad_laptop
battery 7885 0
iwlwifi 148746 1 iwldvm
r8169 59191 0
mii 4251 1 r8169
cfg80211 437959 3 iwlwifi,mac80211,iwldvm
snd_timer 19294 1 snd_pcm
snd 61276 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
wmi 8539 0
rfkill 15971 3 cfg80211,ideapad_laptop
shpchp 25706 0
mei_me 10096 0
mei 66784 1 mei_me
lpc_ich 14008 0
mac_hid 3273 0
soundcore 5551 2 snd,snd_hda_codec
i2c_i801 11364 0
processor 25153 0
ext4 494420 2
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
algif_skcipher 6387 0
af_alg 5020 1 algif_skcipher
dm_crypt 17527 1
dm_mod 85258 3 dm_crypt
sr_mod 15026 0
cdrom 35191 1 sr_mod
sd_mod 37554 3
crc_t10dif 1135 1 sd_mod
atkbd 17006 0
libps2 4571 2 atkbd,psmouse
crct10dif_pclmul 4714 1
crct10dif_common 1436 2 crct10dif_pclmul,crc_t10dif
crc32_pclmul 2955 0
crc32c_intel 14217 0
ghash_clmulni_intel 4362 0
xhci_hcd 149286 0
aesni_intel 144871 6
aes_x86_64 7463 1 aesni_intel
lrw 3821 1 aesni_intel
gf128mul 6018 1 lrw
glue_helper 4737 1 aesni_intel
ahci 24299 2
ablk_helper 2100 1 aesni_intel
cryptd 8537 4 ghash_clmulni_intel,aesni_intel,ablk_helper
libahci 21772 1 ahci
libata 174153 2 ahci,libahci
ehci_pci 4152 0
ehci_hcd 64619 1 ehci_pci
scsi_mod 138333 4 rts5139,libata,sd_mod,sr_mod
usbcore 188509 5 uvcvideo,rts5139,ehci_hcd,ehci_pci,xhci_hcd
usb_common 1712 1 usbcore
i8042 13666 2 libps2,ideapad_laptop
serio 11018 9 serio_raw,atkbd,i8042,psmouse
i915 797177 2
video 12057 1 i915
button 4765 1 i915
intel_gtt 12856 1 i915
i2c_algo_bit 5480 1 i915
drm_kms_helper 39643 1 i915
drm 244846 4 i915,drm_kms_helper
i2c_core 41648 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
journalctl of a previous attempt
Aug 15 11:11:23 jdlptp kernel: [drm] Initialized drm 1.1.0 20060810
Aug 15 11:11:23 jdlptp kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 15 11:11:23 jdlptp kernel: ACPI: Lid Switch [LID0]
Aug 15 11:11:23 jdlptp kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Aug 15 11:11:23 jdlptp kernel: ACPI: Sleep Button [SLPB]
Aug 15 11:11:23 jdlptp kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Aug 15 11:11:23 jdlptp kernel: ACPI: Power Button [PWRB]
Aug 15 11:11:23 jdlptp kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Aug 15 11:11:23 jdlptp kernel: ACPI: Power Button [PWRF]
Aug 15 11:11:23 jdlptp kernel: [drm] Memory usable by graphics device = 2048M
Aug 15 11:11:23 jdlptp kernel: checking generic (e0000000 410000) vs hw (e0000000 10000000)
Aug 15 11:11:23 jdlptp kernel: fb: switching to inteldrmfb from VESA VGA
Aug 15 11:11:23 jdlptp kernel: Console: switching to colour dummy device 80x25
Aug 15 11:11:23 jdlptp kernel: i915 0000:00:02.0: irq 40 for MSI/MSI-X
Aug 15 11:11:23 jdlptp kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug 15 11:11:23 jdlptp kernel: [drm] Driver supports precise vblank timestamp query.
Aug 15 11:11:23 jdlptp kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 15 11:11:23 jdlptp kernel: fbcon: inteldrmfb (fb0) is primary device
Aug 15 11:11:23 jdlptp kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
I've tested all the kernels > 3.15.8 but they seem to create the error above. My questions are
Was there a change in the linux kernel options from 3.15.8?
Am I using / missing a module that I shouldn't / should be using for my cpu?
Last edited by acothi (2014-10-06 02:49:39)Hi acothi,
I was getting the same error message for months. Linux kernel 3.16.3-1 finally fixed it for me. My system: Intel Ivy-Bridge i5-3570K CPU + Intel DH77DF Mobo with latest BIOS (dated 2013). Please update to latest kernel in [Core] and report back. However, I don't think that your SD card slot issues are directly related to this error message. I also recommend installing linux-lts kernel and adding a bootloader entry, so you can still be productive, even if the latest Linux kernel doesn't fix it for you.
Afaik, this error has nothing to do with kernel options, but was introduced by a usual kernel commit (and seems to be fixed upstream).
Cheers,
Tolga
Last edited by tolga9009 (2014-10-06 16:47:02) -
FIFO - Goods Issue to Purchase relation
Hello Experts,
My client maintains the Inventory in FIFO model.
They wants to know the corresponding purchase (GR PO/Invoice) of the Item issued (delivery/transfer) from a wharehouse. From whare I can generate this info? If any one is having a query to generate this info please share
Thanks and regards
Ajith GHi,
Check below link tooo
Query for a list of FIFO layers with quantity and FIFO cost
Thanks
Deepak Tyagi -
Batch determination based on fifo during goods issue
Hi All,
My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
I have activated batch wise split valuation.
I have maintained characterstics with MCH1 table and HSDAT.
Assigned to class and class is assigned to stratergy type.
Created sort sequence and sort rule ascennding.
Assigned this to stratergy type.
Maintained condition record also.
During goods issue to production system is not proposing the batch based on gr date.
System is not stopping me while making goods issue with other batch.
Please guide to fix the above issue.
Regards,
VenkateshSplit valuation has nothing to do with this problem.
I hope you do not just require the sequence for physical goods issue to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
here you set the box for batch check active, which means if a batch is entered manually then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.
Maybe you are looking for
-
Hi, I have the below cursor 1 which is working already.For my requirement i want to use bind variable like second cursor.But its telling Bind Variable "p_col_list" is NOT DECLARED.Please any onehelp me on this. How to use bind variable Here. Cursor1:
-
i am running iphoto 5, and when i check for updates, it will not offer an upgrade to iphoto 6.x can i still get this upgrade, or do i have to buy ilife 08 in order to upgrade iphoto
-
Bulding a diffucult report..need some help
hello, I have been having a hard time trying to produce a report with the following requirements: The report is a billing report. I hope you can help or point me in the right direction. report requirements: out_date date_in Bill 2/23 3/2 3/1 to 3/2 3
-
Shaper Dropping Packets without Hitting CIR
I've got a 2921 with an outbound shaper on an interface (1GE) set to an average of 20mbps. The offered rate doesn't appear to be exceeding, or even coming close to the CIR, so I'm not sure why the drops are incrementing. (queue-length 64 packets) Fro
-
Problems importing CDs after upgrade
I have upgraded to the latest version of Quicktime and iTunes. Now when I pop in some CDs to import them (or, in this case, to re-import them at a higher bitrate, to match the songs I've upgraded through iTunes Plus), my MacBook won't mount the disc.