Fifo "Emergency" procedure.
Hi to all,
we are going live soon with a customer that will use FIFO costing method. The inventory final user are not extremely expert and probably some mistakes will happen.
I would like to understand in advance what would be the best procedure in order to fix mistakes.
I.e. If an user issue one item (with a misc issue) the oldest layer will be used. If for some reason they understand that they issued the wrong item, we cannot simply receive it back to inventory as a new layer will be created and in the next issue another layer will be used.
I understand that is absolutely a correct behaviour, but I would like to understand if we can try a way to be sure to recover in some way the human error.
As by now I can think of updating the layers or some correction in GL at month's end, but probably there is a better way.
What would be the best strategy in your opinion?
Any advise?
Best regards
Francesco.
Hi Paul
Lets assume you have already defined a Enterprise context with data and you forgot system password, you cant restore a backup because it has the same password and old enterprise data.
Is there a trick to reset the system password directly from the database or from a setting on the j2ee CE ( you know I am looking for a procedure similar to activating the emergency user on the SAP j2ee using the configtool)
Thanks.
Similar Messages
-
Balance Sheet Valuation Procedures
Dear Experts,
In IMG Setting for :-
Balance Sheet Valuation Procedures -> Configure LIFO/FIFO Method -> General Informaiton -> Activate LIFO/FIFO Valuation (Tcode: OMW4) "LIFO Valuation Active" and "FIFO Valuation Active" button are SELECTED, what does this mean? Balance sheet valuation is based on which valuation? Please advise.
Thank you.Hi ,
What you are looking at is first level of definition. There are further levels of control on mvt.types etc.
By default FIFO will be the valuation procedure , but you can set this to different based on requirement.
If you activate only FIFO or LIFO at first level you are left with no choice for further levels.
You may have to consult FI person on how FIFO/LIFO procedure is linked to balance sheet...
Thanks,
sudhakar -
Random I/O errors (hdd) and failing to boot, Windows not affected
I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
Partition layout:
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs System Reserved D8B40750B4073094
├─sda2 ntfs 00EA107FEA107360
└─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
sr0
All three are primary partitions. Using ext4 yields the exact same result.
The problem is easy to reproduce:
Install Windows 7 to first half of HDD and Arch on the second half
At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
Windows seems to work just fine
Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
[ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x9FB7C000 000040
[ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1668MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
[ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
[ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
[ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
[ 0.000000] On node 0 totalpages: 649053
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3337 pages used for memmap
[ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5234680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146853a - 0xc162ec80 (1817 kB)
.text : 0xc1000000 - 0xc146853a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.408 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140424
[ 0.009582] ACPI: All ACPI Tables successfully acquired
[ 0.015209] Security Framework initialized
[ 0.015217] Yama: becoming mindful.
[ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015491] Initializing cgroup subsys devices
[ 0.015498] Initializing cgroup subsys freezer
[ 0.015502] Initializing cgroup subsys net_cls
[ 0.015507] Initializing cgroup subsys blkio
[ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015531] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015536] mce: CPU supports 7 MCE banks
[ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016347] ftrace: allocating 19356 entries in 38 pages
[ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.162668] ... version: 0
[ 0.162670] ... bit width: 48
[ 0.162671] ... generic registers: 6
[ 0.162672] ... value mask: 0000ffffffffffff
[ 0.162674] ... max period: 00007fffffffffff
[ 0.162675] ... fixed-purpose events: 0
[ 0.162676] ... event mask: 000000000000003f
[ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
[ 0.186179] x86: Booting SMP configuration:
[ 0.186182] .... node #0, CPUs: #1
[ 0.218942] Initializing CPU#1
[ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
[ 0.226179] #2
[ 0.258736] Initializing CPU#2
[ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
[ 0.266180] #3
[ 0.276300] Initializing CPU#3
[ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.279379] x86: Booted up 1 node, 4 CPUs
[ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
[ 0.280484] devtmpfs: initialized
[ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[ 0.281973] pinctrl core: initialized pinctrl subsystem
[ 0.282053] RTC time: 22:28:26, date: 09/21/14
[ 0.282107] NET: Registered protocol family 16
[ 0.282225] cpuidle: using governor ladder
[ 0.282228] cpuidle: using governor menu
[ 0.282436] ACPI: bus type PCI registered
[ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.282558] PCI: Using MMCONFIG for extended config space
[ 0.282559] PCI: Using configuration type 1 for base access
[ 0.293370] ACPI: Added _OSI(Module Device)
[ 0.293374] ACPI: Added _OSI(Processor Device)
[ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323484] ACPI: Interpreter enabled
[ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.323519] ACPI: (supports S0 S3 S4 S5)
[ 0.323522] ACPI: Using IOAPIC for interrupt routing
[ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.335971] PCI host bridge to bus 0000:00
[ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.336266] pci 0000:00:01.0: supports D1 D2
[ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.336417] pci 0000:00:01.1: supports D1 D2
[ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
[ 0.340177] pci 0000:00:12.2: supports D1 D2
[ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[ 0.343004] pci 0000:00:13.2: supports D1 D2
[ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.344446] pci 0000:01:00.0: supports D1 D2
[ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
[ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.356487] pci 0000:03:00.0: supports D1 D2
[ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.363129] pci_bus 0000:00: on NUMA node 0
[ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367456] vgaarb: loaded
[ 0.367458] vgaarb: bridge control possible 0000:00:01.0
[ 0.367505] PCI: Using ACPI for IRQ routing
[ 0.369255] PCI: pci_cache_line_size set to 64 bytes
[ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
[ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
[ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
[ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.369516] NetLabel: Initializing
[ 0.369518] NetLabel: domain hash size = 128
[ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369532] NetLabel: unlabeled traffic allowed by default
[ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371730] Switched to clocksource hpet
[ 0.378213] pnp: PnP ACPI init
[ 0.378231] ACPI: bus type PNP registered
[ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.378841] system 00:04: [io 0x04d6] has been reserved
[ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.378846] system 00:04: [io 0x077a] has been reserved
[ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.378850] system 00:04: [io 0x0c14] has been reserved
[ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.378855] system 00:04: [io 0x0c6c] has been reserved
[ 0.378857] system 00:04: [io 0x0c6f] has been reserved
[ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382206] pnp: PnP ACPI: found 6 devices
[ 0.382211] ACPI: bus type PNP unregistered
[ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
[ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420484] NET: Registered protocol family 2
[ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420733] TCP: reno registered
[ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420798] NET: Registered protocol family 1
[ 0.420831] pci 0000:00:01.0: Boot video device
[ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.038759] PCI: CLS 64 bytes, default 64
[ 1.038818] Unpacking initramfs...
[ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
[ 1.112753] Simple Boot Flag at 0x44 set to 0x1
[ 1.113077] perf: AMD NB counters detected
[ 1.113122] LVT offset 0 assigned for vector 0x400
[ 1.113138] perf: AMD IBS detected (0x000000ff)
[ 1.113149] apm: BIOS not found.
[ 1.113200] Scanning for low memory corruption every 60 seconds
[ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.116388] zbud: loaded
[ 1.116669] VFS: Disk quotas dquot_6.5.2
[ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.116962] msgmni has been set to 1707
[ 1.117034] Key type big_key registered
[ 1.117325] bounce: pool size: 64 pages
[ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.117448] io scheduler noop registered
[ 1.117452] io scheduler deadline registered
[ 1.117524] io scheduler cfq registered (default)
[ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118114] GHES: HEST is not enabled!
[ 1.118129] isapnp: Scanning for PnP cards...
[ 1.513691] isapnp: No Plug & Play device found
[ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514746] rtc_cmos 00:01: RTC can wake from S4
[ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515246] TCP: cubic registered
[ 1.515386] NET: Registered protocol family 10
[ 1.515657] NET: Registered protocol family 17
[ 1.516096] Using IPI No-Shortcut mode
[ 1.516269] registered taskstats version 1
[ 1.516866] Magic number: 14:856:502
[ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
[ 1.517032] PM: Hibernation image not present or could not be loaded.
[ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.517350] Write protecting the kernel text: 4516k
[ 1.517388] Write protecting the kernel read-only data: 1332k
[ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.529660] systemd-udevd[57]: starting version 216
[ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
[ 1.568048] ACPI: bus type USB registered
[ 1.568103] usbcore: registered new interface driver usbfs
[ 1.568141] usbcore: registered new interface driver hub
[ 1.568537] SCSI subsystem initialized
[ 1.574578] usbcore: registered new device driver usb
[ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594746] ehci-pci: EHCI PCI platform driver
[ 1.594935] QUIRK: Enable AMD PLL fix
[ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.595002] ehci-pci 0000:00:12.2: debug port 1
[ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
[ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595830] ohci-pci: OHCI PCI platform driver
[ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.602284] libata version 3.00 loaded.
[ 1.602306] hub 1-0:1.0: USB hub found
[ 1.602325] hub 1-0:1.0: 5 ports detected
[ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.602912] ehci-pci 0000:00:13.2: debug port 1
[ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
[ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.612308] hub 2-0:1.0: USB hub found
[ 1.612317] hub 2-0:1.0: 5 ports detected
[ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.613374] hub 3-0:1.0: USB hub found
[ 1.613388] hub 3-0:1.0: 2 ports detected
[ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.616754] hub 4-0:1.0: USB hub found
[ 1.616768] hub 4-0:1.0: 2 ports detected
[ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.673072] hub 5-0:1.0: USB hub found
[ 1.673098] hub 5-0:1.0: 5 ports detected
[ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[ 1.729803] hub 6-0:1.0: USB hub found
[ 1.729831] hub 6-0:1.0: 5 ports detected
[ 1.730166] ahci 0000:00:11.0: version 3.0
[ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.731131] scsi0 : ahci
[ 1.731321] scsi1 : ahci
[ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
[ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
[ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[ 2.218438] ata2.00: configured for UDMA/133
[ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.318651] ata1.00: configured for UDMA/133
[ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.338885] sda: sda1 sda2 sda3
[ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 2.438989] ata1.00: irq_stat 0x40000008
[ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
[ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 2.439127] ata1.00: status: { DRDY ERR }
[ 2.439166] ata1.00: error: { ICRC ABRT }
[ 2.439207] ata1: hard resetting link
[ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586950] usbcore: registered new interface driver usbhid
[ 2.586953] usbhid: USB HID core driver
[ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
[ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
[ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
[ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
[ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.039928] ata1.00: configured for UDMA/133
[ 3.039955] ata1: EH complete
[ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
[ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
[ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
[ 3.089128] ata1.00: irq_stat 0x40000008
[ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
[ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.089265] ata1.00: status: { DRDY ERR }
[ 3.089304] ata1.00: error: { ICRC ABRT }
[ 3.089346] ata1: hard resetting link
[ 3.115583] Switched to clocksource tsc
[ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.694602] ata1.00: configured for UDMA/133
[ 3.694621] ata1: EH complete
[ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
[ 3.809168] ata1.00: irq_stat 0x40000008
[ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
[ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.809305] ata1.00: status: { DRDY ERR }
[ 3.809343] ata1.00: error: { ICRC ABRT }
[ 3.809385] ata1: hard resetting link
[ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.404835] ata1.00: configured for UDMA/133
[ 4.404858] ata1: EH complete
[ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
[ 4.453760] ata1.00: irq_stat 0x40000008
[ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
[ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
[ 4.453894] ata1.00: status: { DRDY ERR }
[ 4.453932] ata1.00: error: { UNC }
[ 4.637639] ata1.00: configured for UDMA/133
[ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
[ 4.637691] sd 0:0:0:0: [sda]
[ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
[ 4.637695] sd 0:0:0:0: [sda]
[ 4.637697] Sense Key : 0x3 [current] [descriptor]
[ 4.637700] Descriptor sense data with sense descriptors (in hex):
[ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.637710] 00 00 09 b8
[ 4.637714] sd 0:0:0:0: [sda]
[ 4.637716] ASC=0x11 ASCQ=0x4
[ 4.637718] sd 0:0:0:0: [sda] CDB:
[ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
[ 4.637727] end_request: I/O error, dev sda, sector 2488
[ 4.637786] Buffer I/O error on device sda1, logical block 55
[ 4.637826] Buffer I/O error on device sda1, logical block 56
[ 4.637866] Buffer I/O error on device sda1, logical block 57
[ 4.637905] Buffer I/O error on device sda1, logical block 58
[ 4.637945] Buffer I/O error on device sda1, logical block 59
[ 4.637984] Buffer I/O error on device sda1, logical block 60
[ 4.638024] Buffer I/O error on device sda1, logical block 61
[ 4.638063] Buffer I/O error on device sda1, logical block 62
[ 4.638105] Buffer I/O error on device sda1, logical block 63
[ 4.638188] ata1: EH complete
[ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
[ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
[ 4.879364] ata1.00: irq_stat 0x40000008
[ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
[ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 4.879502] ata1.00: status: { DRDY ERR }
[ 4.879540] ata1.00: error: { ICRC ABRT }
[ 4.879583] ata1: hard resetting link
[ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5.469816] ata1.00: configured for UDMA/133
[ 5.469845] ata1: EH complete
[ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 5.582859] ata1.00: irq_stat 0x40000008
[ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
[ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 5.582997] ata1.00: status: { DRDY ERR }
[ 5.583036] ata1.00: error: { ICRC ABRT }
[ 5.583078] ata1: hard resetting link
[ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.191135] ata1.00: configured for UDMA/133
[ 6.191166] ata1: EH complete
[ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
[ 6.256073] ata1.00: irq_stat 0x40000008
[ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
[ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.256212] ata1.00: status: { DRDY ERR }
[ 6.256250] ata1.00: error: { ICRC ABRT }
[ 6.256292] ata1: hard resetting link
[ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.845773] ata1.00: configured for UDMA/133
[ 6.845806] ata1: EH complete
[ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
[ 6.986223] ata1.00: irq_stat 0x40000008
[ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
[ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.986360] ata1.00: status: { DRDY ERR }
[ 6.986399] ata1.00: error: { ICRC ABRT }
[ 6.986440] ata1: hard resetting link
[ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.578097] ata1.00: configured for UDMA/133
[ 7.578124] ata1: EH complete
[ 7.587216] random: nonblocking pool is initialized
[ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
[ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 7.602850] ata1.00: irq_stat 0x40000008
[ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
[ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 7.602982] ata1.00: status: { DRDY ERR }
[ 7.603020] ata1.00: error: { ICRC ABRT }
[ 7.603061] ata1: hard resetting link
[ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.188490] ata1.00: configured for UDMA/133
[ 8.188517] ata1: EH complete
[ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[ 8.216361] ata1.00: irq_stat 0x40000008
[ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
[ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.216500] ata1.00: status: { DRDY ERR }
[ 8.216539] ata1.00: error: { ICRC ABRT }
[ 8.216581] ata1: hard resetting link
[ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.809726] ata1.00: configured for UDMA/133
[ 8.809758] ata1: EH complete
[ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[ 8.836295] ata1.00: irq_stat 0x40000008
[ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
[ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.836429] ata1.00: status: { DRDY ERR }
[ 8.836467] ata1.00: error: { ICRC ABRT }
[ 8.836507] ata1: hard resetting link
[ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.430994] ata1.00: configured for UDMA/133
[ 9.431018] ata1: EH complete
[ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 9.837542] ata1.00: irq_stat 0x40000008
[ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
[ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 9.837680] ata1.00: status: { DRDY ERR }
[ 9.837719] ata1.00: error: { ICRC ABRT }
[ 9.837761] ata1: hard resetting link
[ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.515900] ata1.00: configured for UDMA/133
[ 10.515972] sd 0:0:0:0: [sda]
[ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
[ 10.515978] sd 0:0:0:0: [sda]
[ 10.515979] Sense Key : 0xb [current] [descriptor]
[ 10.515983] Descriptor sense data with sense descriptors (in hex):
[ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.515992] 5e 89 08 20
[ 10.515997] sd 0:0:0:0: [sda]
[ 10.515998] ASC=0x47 ASCQ=0x0
[ 10.516001] sd 0:0:0:0: [sda] CDB:
[ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
[ 10.516010] end_request: I/O error, dev sda, sector 1586038816
[ 10.516148] ata1: EH complete
[ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
[ 10.529786] ata1.00: irq_stat 0x40000008
[ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
[ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 10.529924] ata1.00: status: { DRDY ERR }
[ 10.529962] ata1.00: error: { ICRC ABRT }
[ 10.530004] ata1: hard resetting link
[ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.139673] ata1.00: configured for UDMA/100
[ 11.139723] sd 0:0:0:0: [sda]
[ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
[ 11.139728] sd 0:0:0:0: [sda]
[ 11.139730] Sense Key : 0xb [current] [descriptor]
[ 11.139733] Descriptor sense data with sense descriptors (in hex):
[ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.139743] 5e 89 08 d4
[ 11.139747] sd 0:0:0:0: [sda]
[ 11.139749] ASC=0x47 ASCQ=0x0
[ 11.139751] sd 0:0:0:0: [sda] CDB:
[ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
[ 11.139761] end_request: I/O error, dev sda, sector 1586038992
[ 11.139889] ata1: EH complete
[ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
[ 11.153169] ata1.00: irq_stat 0x40000008
[ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
[ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.153306] ata1.00: status: { DRDY ERR }
[ 11.153345] ata1.00: error: { ICRC ABRT }
[ 11.153386] ata1: hard resetting link
[ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.749884] ata1.00: configured for UDMA/100
[ 11.749918] sd 0:0:0:0: [sda]
[ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
[ 11.749923] sd 0:0:0:0: [sda]
[ 11.749925] Sense Key : 0xb [current] [descriptor]
[ 11.749928] Descriptor sense data with sense descriptors (in hex):
[ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.749938] 5e 89 08 28
[ 11.749942] sd 0:0:0:0: [sda]
[ 11.749944] ASC=0x47 ASCQ=0x0
[ 11.749946] sd 0:0:0:0: [sda] CDB:
[ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
[ 11.749956] end_request: I/O error, dev sda, sector 1586038824
[ 11.750093] ata1: EH complete
[ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 11.763206] ata1.00: irq_stat 0x40000008
[ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
[ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.763343] ata1.00: status: { DRDY ERR }
[ 11.763382] ata1.00: error: { ICRC ABRT }
[ 11.763424] ata1: hard resetting link
[ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.360321] ata1.00: configured for UDMA/100
[ 12.360370] sd 0:0:0:0: [sda]
[ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
[ 12.360375] sd 0:0:0:0: [sda]
[ 12.360377] Sense Key : 0xb [current] [descriptor]
[ 12.360380] Descriptor sense data with sense descriptors (in hex):
[ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.360390] 5e 89 08 c8
[ 12.360394] sd 0:0:0:0: [sda]
[ 12.360395] ASC=0x47 ASCQ=0x0
[ 12.360398] sd 0:0:0:0: [sda] CDB:
[ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
[ 12.360407] end_request: I/O error, dev sda, sector 1586038984
[ 12.360543] ata1: EH complete
[ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.370005] ata1.00: irq_stat 0x40000008
[ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
[ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.370143] ata1.00: status: { DRDY ERR }
[ 12.370182] ata1.00: error: { ICRC ABRT }
[ 12.370224] ata1: hard resetting link
[ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.959379] ata1.00: configured for UDMA/100
[ 12.959426] sd 0:0:0:0: [sda]
[ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
[ 12.959432] sd 0:0:0:0: [sda]
[ 12.959433] Sense Key : 0xb [current] [descriptor]
[ 12.959437] Descriptor sense data with sense descriptors (in hex):
[ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.959447] 63 89 08 3a
[ 12.959462] sd 0:0:0:0: [sda]
[ 12.959464] ASC=0x47 ASCQ=0x0
[ 12.959466] sd 0:0:0:0: [sda] CDB:
[ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
[ 12.959476] end_request: I/O error, dev sda, sector 1669924920
[ 12.959616] ata1: EH complete
[ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
[ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.973247] ata1.00: irq_stat 0x40000008
[ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
[ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.973384] ata1.00: status: { DRDY ERR }
[ 12.973423] ata1.00: error: { ICRC ABRT }
[ 12.973464] ata1: hard resetting link
[ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.569691] ata1.00: configured for UDMA/33
[ 13.569750] sd 0:0:0:0: [sda]
[ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
[ 13.569755] sd 0:0:0:0: [sda]
[ 13.569757] Sense Key : 0xb [current] [descriptor]
[ 13.569761] Descriptor sense data with sense descriptors (in hex):
[ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 13.569771] 5e 89 08 c0
[ 13.569775] sd 0:0:0:0: [sda]
[ 13.569777] ASC=0x47 ASCQ=0x0
[ 13.569779] sd 0:0:0:0: [sda] CDB:
[ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
[ 13.569789] end_request: I/O error, dev sda, sector 1586038976
[ 13.569933] ata1: EH complete
[ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
[ 13.583360] ata1.00: irq_stat 0x40000008
[ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
[ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 13.585478] ata1.00: status: { DRDY ERR }
[ 13.585516] ata1.00: error: { ICRC ABRT }
[ 13.585558] ata1: hard resetting link
[ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.180020] ata1.00: configured for UDMA/33
[ 14.180069] sd 0:0:0:0: [sda]
[ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
[ 14.180074] sd 0:0:0:0: [sda]
[ 14.180076] Sense Key : 0xb [current] [descriptor]
[ 14.180079] Descriptor sense data with sense descriptors (in hex):
[ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.180089] 63 89 08 30
[ 14.180094] sd 0:0:0:0: [sda]
[ 14.180095] ASC=0x47 ASCQ=0x0
[ 14.180098] sd 0:0:0:0: [sda] CDB:
[ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
[ 14.180108] end_request: I/O error, dev sda, sector 1669924912
[ 14.180245] ata1: EH complete
[ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
[ 14.190153] ata1.00: irq_stat 0x40000008
[ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
[ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.190290] ata1.00: status: { DRDY ERR }
[ 14.190328] ata1.00: error: { ICRC ABRT }
[ 14.190371] ata1: hard resetting link
[ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.779168] ata1.00: configured for UDMA/33
[ 14.779214] sd 0:0:0:0: [sda]
[ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
[ 14.779218] sd 0:0:0:0: [sda]
[ 14.779220] Sense Key : 0xb [current] [descriptor]
[ 14.779223] Descriptor sense data with sense descriptors (in hex):
[ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.779233] 63 89 08 80
[ 14.779237] sd 0:0:0:0: [sda]
[ 14.779239] ASC=0x47 ASCQ=0x0
[ 14.779241] sd 0:0:0:0: [sda] CDB:
[ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
[ 14.779251] end_request: I/O error, dev sda, sector 1669924976
[ 14.779391] ata1: EH complete
[ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
[ 14.793513] ata1.00: irq_stat 0x40000008
[ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
[ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.793651] ata1.00: status: { DRDY ERR }
[ 14.793690] ata1.00: error: { ICRC ABRT }
[ 14.793733] ata1: hard resetting link
[ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.378218] ata1.00: configured for UDMA/33
[ 15.378240] sd 0:0:0:0: [sda]
[ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
[ 15.378245] sd 0:0:0:0: [sda]
[ 15.378247] Sense Key : 0xb [current] [descriptor]
[ 15.378250] Descriptor sense data with sense descriptors (in hex):
[ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.378260] 63 89 08 28
[ 15.378264] sd 0:0:0:0: [sda]
[ 15.378266] ASC=0x47 ASCQ=0x0
[ 15.378268] sd 0:0:0:0: [sda] CDB:
[ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
[ 15.378277] end_request: I/O error, dev sda, sector 1669924904
[ 15.378427] ata1: EH complete
[ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
[ 15.390148] ata1.00: irq_stat 0x40000008
[ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
[ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.390285] ata1.00: status: { DRDY ERR }
[ 15.390324] ata1.00: error: { ICRC ABRT }
[ 15.390366] ata1: hard resetting link
[ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.977410] ata1.00: configured for UDMA/33
[ 15.977500] ata1: EH complete
[ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
[ 15.986916] ata1.00: irq_stat 0x40000008
[ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
[ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.987054] ata1.00: status: { DRDY ERR }
[ 15.987093] ata1.00: error: { ICRC ABRT }
[ 15.987135] ata1: hard resetting link
[ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.576437] ata1.00: configured for UDMA/33
[ 16.576509] sd 0:0:0:0: [sda]
[ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
[ 16.576514] sd 0:0:0:0: [sda]
[ 16.576516] Sense Key : 0xb [current] [descriptor]
[ 16.576519] Descriptor sense data with sense descriptors (in hex):
[ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.576529] 63 89 08 20
[ 16.576533] sd 0:0:0:0: [sda]
[ 16.576534] ASC=0x47 ASCQ=0x0
[ 16.576537] sd 0:0:0:0: [sda] CDB:
[ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
[ 16.576546] end_request: I/O error, dev sda, sector 1669924896
[ 16.576642] ata1: EH complete
[ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
[ 16.586847] ata1.00: irq_stat 0x40000008
[ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
[ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 16.586980] ata1.00: status: { DRDY ERR }
[ 16.587018] ata1.00: error: { ICRC ABRT }
[ 16.587058] ata1: hard resetting link
[ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.175907] ata1.00: configured for UDMA/33
[ 17.175963] sd 0:0:0:0: [sda]
[ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
[ 17.175968] sd 0:0:0:0: [sda]
[ 17.175970] Sense Key : 0xb [current] [descriptor]
[ 17.175973] Descriptor sense data with sense descriptors (in hex):
[ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 17.175983] 5e 89 08 54
[ 17.175987] sdI have only Arch installed, 64 bit, UEFI boot.
The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
Sep 24 06:13:59 kernel: ata6: hard resetting link
Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:13:59 kernel: 00 00 0e 87
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
Sep 24 06:13:59 kernel: ata6: EH complete
Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6: hard resetting link
Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
and so on... It somehow booted, but now journalctl says:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
while the Error hasn't occured yet.
I think I wil take the emergency procedure, and start backing up my files and system ...
I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse. -
..
This worked amazingly!! Thanks for the post awvik360!
I was able to access the internal hard drive and perform a permissions fix through disk utility and re-apply the OS X 10.5.6 combo update on a totally debilitated machine (Mac Pro early 08).
Some clarification though:
{{ I used a MacBook Pro instead of USB/ExternalHD to run a working copy of OS X. }}
~ Just start up the healthy OS X (laptop) in target disk mode (hold 't' key while it powers up)
~ Connect it to the impaired Mac with the highest speed cable available (fire800>fire400>USB)
~ Start up the impaired Mac while holding the alt/option key to select the boot drive.
~ Select the connected OS X (laptop hard disk) and start er up.
~ Run disk utility and you can now use the Fix Permissions option on the impaired Mac's internal hard drive.
~ Run the OS X Combo Update (or presumably other offending update/program) and make sure to change the destination to the internal disk of the impaired Mac
~ Shut down, unplug target disk, start up, and you should be good to go.
I was in some kind of uber-kernel panic and could not start up in safe mode OR from the installation disc, and this worked! Definitely a good emergency procedure to have in your back pocket.
Note: ...target disk pairing must be in this direction. I tried setting up the impaired Mac as target and connecting it to running laptop, and it let me run the install fine, but it didn't fix the problem...must be something with permissions that the impaired Mac needs to install to itself, even if the OS is running on another disk/machine.
-T. -
When I was using the HP Prime for the first time the Spreadsheet App had problems. I couldn't enter any number in the cell, the error message came up and when I moved to another cell and made an attempt to enter any data the calculator started popping up the screen as if it were connected for the first time. I did the reset and did not solve the problem, and if I leave the calculator in the App Spreadsheet and go to any other function, for example, Home to use it in common operations the Calculator restarts the same way. To use the calculator in any another function I have to leave the Spreadsheet App.
One possible cause of your trouble is a bug in the Spreadsheet App which was present in the version of the firmware that was in the initial release of the HP Prime. Press the Help key, tap Tree, navigate to the second line from the top (About HP Prime) and tap OK. If you have Software version 2013 8 13 (5106), then you have the original version, which is buggy and now obsolete. If this is the case, be sure to run the Connectivity Kit on your PC, use it to download the latest firmware and to upgrade your Prime. The current version is 2013 11 25 (5447). If that does not help, your flash memory might have been corrupted by the old Spreadsheet bug. To wipe your flash memory (don't worry; it doesn't wipe the operating system, but you will lose all your saved data and programs), do this emergency procedure: Turn off.Press and hold down the F, C, and O keys. (That's the letter O, not the digit zero).Press and release the On key, while still holding down F, C, and O.When the "DIAGNOSTIC" screen appears, release C, F, and O.Press 4, 3, Enter.After a few moments, a blue OK appears on the right edge.Press Esc, 9. Your HP Prime's flash memory will then be completely cleared. Hope that helps! Disclaimer: I do not work for HP. I'm just another happy HP Prime owner.
-
Tecra 8200 wont start (blank screen)
Hi.
A friend of mine has asked me to help her with Tecra 8200 her notebook with WinXP/SP1 installed was sluggish. Being a gentleman, Ive accepted a call, and reinstalled WinXP Pro (originally, this model was shipped with Win98SE). Installation went right, but Ive noticed error entries in System Log regarding BIOS ACPI compliance (once, each time upon machine startup). I continued, installed SP1, successfully, but the ACPI problem remained. Everything else was fine (all HW detected, and appropriate (Microsoft/default) drivers installed). I was thinking of checking for a new BIOS release on Toshibas site, but I left BIOS update procedure for some other occasion.
Then, being intrigued with a problem, I have "cleverly" decided to actually test ACPI, so I put notebook in standby. And, that was it: now, machine doesnt want to start! The screen is blank, HDD is not spinning up, CPU fan is silent Power button is operational, but all I get is Power LED lit up Frustrating! I have tried to revive the machine with standard emergency procedure (switching off, and then back on, taking out battery pack, pressing various key combinations to enter BIOS setup) but accomplished NOTHING.
Searching posted notes on this forum, I have come only to one conclusion: "hardware malfunction take your notebook to ASP".
Is there anything else I could try?
Thnks, in advance.Hi Igor
All you tried was right but if there is no possibility to enter BIOS something is obviously faulty.
Sorry but it can really be some hardware problem. -
Everything frozen when trying to move music from ipod to mac. Cannot eject.
My hard drive recently crashed, and as a result I lost all of my music. I had most of it on my iPod, so today I downloaded a program called iPod Viewer 3.0.1
( http://download.cnet.com/iPod-Viewer/3000-18545_4-24961.html?tag=mncol )
I put my iPod (30gig iPod Video) into disk mode, and connected it, and began to transfer my music. About a tenth of the way through, the program froze. I pressed "Cancel," and eventually hit "Force Quit."
I had been importing the music into the iTunes Music folder.
Now, iTunes won't open, the program iPod Viewer won't start working again, and I cannot properly eject my iPod. Neither program is running, but when I try to press "Eject," Finder tells me that the iPod is in use and cannot be ejected, and I need to quit applications and try again.
Help?See turingtest2's user tip on Recover your iTunes library from your iPod or iOS device for information on various 3rd party tools that can be used to recover content from iDevices to iTunes. You can also achieve a partial recovery (media only, possibly without artwork), as follows:
Run iTunes with your iPod not connected, select Edit > Preferences > Devices and check the Prevent iPods, iPhones, and iPads from syncing automatically box
Connect your iPod, select the Summary tab and check the Enable disk use box
Exit iTunes
You should now be able to see your iPod as a disc drive in Windows Explorer. Make sure that you've configured Windows to show hidden files and folders (Organize > Folder Search and Options, View tab).
Open the iPod_Control folder on your iPod, and copy the Music folder that you'll see there to your desktop
Still using Windows Explorer, right click on the Music folder just copied to your desktop and make sure that both the Read-only and Hidden flags are cleared.
Run iTunes, select File > Add Folder to Library..., navigate to and select the Music folder on your desktop
The previous content of your iPod should now be added to your library. Any songs/albums for which you'd previously used the Get Album Artwork function will no longer have associated images, but these should be easily redone.
This should be regarded as an "emergency" procedure only. There's no excuse for not maintaining an up to date backup of your iTunes library (as with any data that you value) - computers, and in particular hard drives, always fail ... you just don't know when it's going to happen. See another of tt2's user tips - Backup your iTunes for Windows library with SyncToy - for a suitable/recommended method. Although cloud-based backups are the way things are headed, its probably still simpler to use an external hard drive - this may not be as high-tech as using the cloud but is more robust, at least as far as not having dependence on an internet connection. -
Dear friends,
For the new part number, material master has been created with out costing & accounting views. But,Shop floor person has created and released the Production order for the item and booked the scrap against the order.
The requirement here is without costing & accounting viewl the system should not allow to create/release the Production order.
Any suggestion is greatly appreciated
Regards,
CLSdo you really think it is a good idea to prevent this business case.
It is certainly an exception if it will be needed. But if you close the door...........
In the rare case of a system crash or network trouble, nobody is able to do anything in SAP, but often the business goes on with good defined emergency procedures and work arounds.
So there might be the need to enter an order after the fact.Of course with the correct delivery date for several reasons:
- to record exact delivery dates for statistics and tracing
- to differentiate between order that have still to be fulfilled physically from orders that only need to be fulfilled logically (as physical delivery had already happened)
- to no prolong payment terms that are based on delivery date and loose extra money in an emergency case. -
8310 Deleting Messages, Pictures on own.
This is the second time this has happened to my Blackberry 8310. It deletes my messages, pictures, and my music. This only happens after I have synced with my desktop computer using my Roxio media manager that came with my Blackberry. The last time this happened AT&T sent me a new Blackberry, however my device is now out of warranty and I need to fix the problem. I have already tried a soft reset, AT&T has already refreshed my device from the call center, however my media has not been restored and I am not sure I am getting all my messages. Please advise.
13MB is not low but it is not high either.
I believe at the time your stuff was deleted, the File Free was much lower.
In that case, the blackberry activates an emergency procedure to free some memory. The process is to delete what your blackberry considers "deletable". That includes old emails, old sms, old calendar items and phone log.
to prevent that, you should close all the applications you do not use. And also do not store your pictures on the internal memory but on the media card (the one that has a lot of space you showed me earlier).
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Powerbook shuts down for no reason then opens again
hi, i am experiencing a rather bizarre problem with my newly purchased powerbook. i can be working away when all of a sudden it appears to shut down. nothing i can do will turn it back on including holding down power button, then all of a sudden it will turn itself back on again and the screen will show exactly what it was showing before the apparent shutdown. it normally takes a couple of minutes to come back on. in itself it's not too worrying but is it indicative of a more serious fault? anyone any thoughts?
thanksHi,
I had a similar problem.
After downloading a utility called "Temperature Monitor" (available on Version Tracker), I found out that now and then, the track pad temperature sensor all of a sudden would record extremely low or high temperatures and hence start an emergency procedure (i.e. force the sleep mode) to protect the Powerbook.
Clearly, the sensor is defective and has to be replaced (still under warranty) but I haven't contacted Apple yet.
In your case, it might be an other sensor. Easy to find out with the history graphing capability of Temperature Monitor.
Hope this helps
Michel
ALPB 1.5G (2) 512MB Mac OS X (10.4.3) -
Looking to import music from android to itunes
I have a Samsung s3 and would finally like to import the music to my ITunes library via windows 7 desk top or Mac pro laptop?
See turingtest2's user tip on Recover your iTunes library from your iPod or iOS device for information on various 3rd party tools that can be used to recover content from iDevices to iTunes. You can also achieve a partial recovery (media only, possibly without artwork), as follows:
Run iTunes with your iPod not connected, select Edit > Preferences > Devices and check the Prevent iPods, iPhones, and iPads from syncing automatically box
Connect your iPod, select the Summary tab and check the Enable disk use box
Exit iTunes
You should now be able to see your iPod as a disc drive in Windows Explorer. Make sure that you've configured Windows to show hidden files and folders (Organize > Folder Search and Options, View tab).
Open the iPod_Control folder on your iPod, and copy the Music folder that you'll see there to your desktop
Still using Windows Explorer, right click on the Music folder just copied to your desktop and make sure that both the Read-only and Hidden flags are cleared.
Run iTunes, select File > Add Folder to Library..., navigate to and select the Music folder on your desktop
The previous content of your iPod should now be added to your library. Any songs/albums for which you'd previously used the Get Album Artwork function will no longer have associated images, but these should be easily redone.
This should be regarded as an "emergency" procedure only. There's no excuse for not maintaining an up to date backup of your iTunes library (as with any data that you value) - computers, and in particular hard drives, always fail ... you just don't know when it's going to happen. See another of tt2's user tips - Backup your iTunes for Windows library with SyncToy - for a suitable/recommended method. Although cloud-based backups are the way things are headed, its probably still simpler to use an external hard drive - this may not be as high-tech as using the cloud but is more robust, at least as far as not having dependence on an internet connection. -
Process-related Security Questions
Having just come off an SAP Project (Go-Live was Jan 2!), and being tasked with Security (no training, but nevermind that), the questions that are coming up have to do more with the authorizations process than how to perform a task. Case in point, the users need access NOW, our current process is cumbersome (adding a transaction to a role in DEV, test it in QAS, then move to PRD after approval). I have been creating Z roles left and right because of the missing authorizations and users having to perform their job duties in SAP (the nerve!). This process is a bear, and I have yet to get my arms around it. Eventually, the thought is to have some type of web forms that the business owner can fill out to submit/approve changes (adding a transaction to a role, creating a new role, giving a user a new role, user position changes, etc.), but right now I'm drowning in a sea of emails! Any suggestions from someone who has survived this and came out sane? Thanks!
And to save you from a lot of overtime and hard pushing from users. See that you get an emergency procedure in place, Think like:
1 a way that allows you (ONLY AFTER Approval of the responsible person in the Business) to grant temporary wide roles to a user that can not do their JOB. This buys you time to bring in a PROPER solution.
2 a way to speed up the whole process of approval and transports based on the severity of the error. And remember the severity level can ONLY be decided upon by the right management level in the business. Highest level is: No one involded leaves and all will only be working on the solution until the problem is Solved IN the production system.
It is all a mather of proper procedures and right approvel level. Be sure never to be left to have to decide these things yourselve. Do not get tricked in designing flashy formes etc as they do not do the Job. a simple a4 with the procedure including the nescesarry info lined out is sufficient for the time being. The rest can follow when you survived the first couple of weeks and the pressure is dropping.
One thing to remember also when processes fail after go live you can blame it on incorrect testing before go-live.
For your next project remember to put testing of security roles high on the agenda. -
HP Prime Calculator resetting itself.
As the title suggests, I have an HP Prime that keeps resetting itself when I press the 'num' button. It doesn't reset when I push 'shift' 'num' though. I don't know if I messed something up somehow becuase this button use to work fine. Any help would be great.
Thank you in advance,
Nick
This question was solved.
View Solution.Sorry about the trouble you're having updating your Prime's firmware. The process seems to be finicky about which USB port it likes and which USB ports it doesn't like. It prefers ports on the computer over those on a hub, and prefers the computer ports which are the closest to the motherboard. Usually. But it's finicky and impossible to predict. If paperclip-resetting your Prime and trying to update through a different USB port doesn't work, then perform the following emergency procedure:
1. Make sure your Prime is in "recovery mode". If the Connectivity Kit left it in recovery mode, you're ready for step 2. Otherwise, force your Prime into recovery mode by pressing and holding down the Symb key, then poking a paperclip into the reset hole in the back, then releasing the Symb key.
2. Make sure that the Connectivity Kit is not running, and make sure that the Prime is connected to the computer with the USB cable. Best results are obtained by using the USB port closest to your motherboard.
3. On your PC, navigate to the installation folder of the Connectivity Kit. It's different on different computers, but on mine it's here:
C:\Program Files\Hewlett-Packard\HP Connectivity Kit
In that folder, you'll see a program called "Updater.exe". Run that program directly by double-clicking it. This should perform the update directly, bypassing the finicky Connectivity Kit.
Hope this works! It has always worked when the Connectivity Kit was scorning me.
-Joe- -
Hi
I have looked at help.sap.com abt this -it is unclear to me. Please help.
I have installed EPSP9 NW04 SR1 with KMC. I would like to create an iview that just has links one after the other. Some of these links will point to documents and some will point to sites on client's intranet. So i want the iview to be like this for example:
About Company
Products Sold
Emergency Procedures
How do I create these links? I will upload documents in the portal via KM. But how do I create the links pointing to documents and teh intranet?
Manny Thanks
Namirahi
If you only want some static links you can go for the KM Document iview.
1.Create an html document with the links you needed.
2. Use javascript functions for the links.
3.Save it as text and upload it to a KM folder.
4.Create a KM Document iview and set the path to the document you created in the properties of iview.
5.Place the iview in the portal where you wanted.
Regards
geogi -
FIFO in pl/sql query or procedure
Hi,
I have two tables:
1)Table of recieved items
create table receipts
(item_id number(5),
recieved_date date,
recieved_quantity number,
receipt_id number(5));
insert into receipts(item_id, recieved_date, recieved_quantity, receipt_id)
values(668, '29/12/10', 400, 441);
insert into receipts(item_id, recieved_date, recieved_quantity, receipt_id)
values(668, '29/12/10', 100, 442);
insert into receipts(item_id, recieved_date, recieved_quantity, receipt_id)
values(668, '03/02/11', 150, 444);2)Table of sold items
create table deliveries
(item_id number(5),
delivered_date date,
delivered_quantity number,
delivery_id number(5));
insert into deliveries(item_id, delivered_date, delivered_quantity, delivery_id)
values(668, '01/02/11', 10, 1301);
insert into deliveries(item_id, delivered_date, delivered_quantity, delivery_id)
values(668, '02/02/11', 450, 1303);
insert into deliveries(item_id, delivered_date, delivered_quantity, delivery_id)
values(668, '08/02/11', 15, 1305);
insert into deliveries(item_id, delivered_date, delivered_quantity, delivery_id)
values(668, '09/02/11', 90, 1306);I need to track down from which batch goods are taken (for each delivery) using FIFO method.
FIFO priorities are RECIEVED_DATE, RECEIPT_ID for INs and DELIVERED_DATE, DELIVERY_ID for OUTs.
Desired output should be something like this:
{noformat}
ITEM_ID DELIVERED_DATE DELIVERED_QUANTITY DELIVERY_ID FROM_RECEIPT STOCK_QUANTITY(*)
668 01/02/11 10 1301 441 390
668 02/02/11 390(**) 1303 441 0
668 02/02/11 60(**) 1303 442 40
668 08/02/11 15 1305 442 25
668 09/02/11 25(**) 1306 442 0
668 09/02/11 65(**) 1306 443 85
{noformat}(*)Where STOCK_QUANTITY is the remaining quantity from that batch at the moment after according delivery amount deduction.
(**)If the delivery gets the goods from different batches, the row should be split to display the amount taken from each batch.
How can I make pl/sql query/procedure to track down this?
Any help is very appreciated.
DB version is: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Thank you,
NikitaHi, Nikita,
Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
Use the analytic SUM functuion to get a running total of how much has been receeived and delivered to date. I did this in the sub-queries deliveries_rt and reciepts_rt:
WITH receipts_rt AS
SELECT item_id
, received_date
, received_quantity
, SUM (received_quantity) OVER ( PARTITION BY item_id
ORDER BY received_date
, receipt_id
) AS received_total
, receipt_id
FROM receipts
, deliveries_rt AS
SELECT item_id
, delivered_date
, delivered_quantity
, SUM (delivered_quantity) OVER ( PARTITION BY item_id
ORDER BY delivered_date
, delivery_id
) AS delivered_total
, delivery_id
FROM deliveries
SELECT d.item_id
, d.delivered_date
, LEAST ( received_total + delivered_quantity - delivered_total
, delivered_total + received_quantity - received_total
, delivered_quantity -- ***** See correction, below *****
) AS delivered_quantity
, d.delivery_id
, r.receipt_id AS from_receipt
, GREATEST ( received_total - delivered_total
, 0
) AS stock_quantity
FROM deliveries_rt d
JOIN receipts_rt r ON d.item_id = r.item_id
AND d.delivered_total > r.received_total - r.received_quantity
AND r.received_total > d.delivered_total - d.delivered_quantity
ORDER BY d.item_id
, d.delivered_date
, d.delivery_id
, r.received_date
, r.receipt_id
;What role does item_id play in this problem? I made a guess, but guessing isn't a very good way to solve problems.
It may help to think of each row as having a low running total (or low_rt, the total quantity up to, but NOT including the current row) and a high running total (high_rt, the total qualntity up to AND including the current row). In the sub-queries above, I only computed the high_rt, since it's easy enough to get the low_rt from that by subtraction.
Each row in the deliveries table will be joined to a row in the receipts table if the running totals overlap, that is, if the high_rt of each row is greaterr than the low_rt of the other.
Delivered_quantity is the minimum of the high_rt from either table minus the low_rt of the other, but it can never be greater than the delivered_quantity.
Edited by: Frank Kulash on Mar 3, 2011 10:06 AM
Brief explanation added.
Edited by: Frank Kulash on Apr 23, 2013 12:56 PM
<H3>Correction</H3>
The computation of delivered_quantity in the main query should have 1 more argument to LEAST, like this:
, LEAST ( r.received_total + d.delivered_quantity - d.delivered_total
, d.delivered_total + r.received_quantity - r.received_total
, d.delivered_quantity
, r.received_quantity -- *** Added ***
) AS delivered_quantityThanks to Jean Marie Delhaze ( {message:id=10980754} below) for finding and correcting my mistake.
Maybe you are looking for
-
My CPU usage jumps to 100 % when I use iTunes 10.6.1 -using Windows XP Service Pack 3
When I open itunes 10.6.1 my CPU usage jumps to 100%. it started doing this about 6 months ago when I updated itunes.
-
Flash Player version 10.1.53.64 won't play
I can't seem to get Flash Player version 10,1,53,64 to play video on JayLenosGarage.com or TopGear.com. It does not work out Dell notebook or my desktop. Both the Notebook and desktop run Win XP Pro SP3. On a third new desktop running Win7, it p
-
Sdo_union very slow, suggestions?
Hello, we're doing what we think is a pretty simple sdo_union setup. With 10 geometries to be merged, sdo_union takes about 30 seconds, and maxs out the server during that time. Geomedia via its engine merges the polygons much faster. There is no spa
-
I just did an archive and install of tiger, I have the latest combo update 10.4.11 but I do not have safari 3, I looked for it on Apples download page and it states it is in the combo update while mine wasn't. Where can I get it? Thanks Joe
-
Can you please let me know how i can catch all the orgunits
Dear Freinds, i have a particular scenario in my development where when i pass only the orgunit i have to call the personnel no.s of that orgunit on the selection screen , and for the personnelnos. i have to retrived from the PYXX_REA