FIFO valuation is not updated by system
Hi,
We have activated FIFO valuation and all configuration was set. We done MIGO with different rate and Consumption also done.
Month end we have don e the following process
MRF4,MRF3 and MRF1
the result is system is taking the moving average price only instead of FIFO valuation.
Goods Receipts
Qty price value MAP
100 100 10000 100
150 120 18000 120
200 180 36000 180
450 64000 142.22
Issues :
100 142.22 14222.22 142.22
150 142.22 21333.33 142.22
250 35555.55 142.22
200 0 28444.45 142.22
As per FIF the following is the rate system to take and post
200 180 36000 180
But system is takinf 200 * 142.22 = 28444.45
can anyone guide me to solve this issue.
govind.
HI,
check if you hve set the "single receipt" flag in your FIFO valuation method (T-code OMWP). For explanation whats the difference if the marker is set or not see
http://help.sap.com/saphelp_46c/helpdata/en/47/6106f949f011d1894c0000e829fbbd/content.htm
Check also the "tolerances" setting in MRF1, maybe its made in a way that the FIFO result is not taken into consideration but the material price is taken instead.
BR Christian
Similar Messages
-
Valuation field not updated in Profit Center view
Good morning Gurus,
I am facing a big problem in KE24 report. As I've checked here, one of my valuation fields related to Raw Materials (VVM01) is only being updated in Legal View from CO. Even I check it in CE1SA01 table (my table for CO documents), the value is not updated there for Profit Center view. I've check all exits that we have here, but the problem is not there. Derivation rules for the field are not customized, so I don't know where is the problem.
Anyone have already faced this problem? Could you please help me? Points will be awarded.
Many thanks in advance,
Diogo Patriota.Issue has been resolved.1
Issue has been resolved -
Can not update my system and not able to repair disk
I havn't used my macbook pro for about a year, and recently I need to travel to another place and need it with me.
I see in AppStore that there is an update for my ios, I downloaded it, and run the install.
however, when updating my system. I run into some error, the installer says the update installation failed, and I should restart the computer and repair the disk before continue.
I tried to restart in safeboot, not working, the screen stucks at the apple logo for over half an hour.
And tried to restart with my harddrive, the system tells me I can not select that disk to restart.
I an able to run disk utility from the installer. I can verify disk permissions .
But when I run the disk verify, it gives me an error:
Verifying volume "Macintosh HD"
Checking file system
Performing live verification
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
The volume Machitosh HD could not be verified completely.
Error: This disk needs to be repaired. Click repair Disk.
But the "Repair Disk" button (and the repair permission button)is gray and can not be pressed, when put my mouse over the "repair disk" button, a line of text shows up:
"repair the structure of the disk's file system, if necessary
Not available becaue the selected disk can't be written to."
the repair permission gives me "Not available becaue the selected disk can't be written to." as well.
What do I do now?QiaQiaC,
which model MacBook Pro do you have, and which version of OS X is installed on it? -
Host Information is not updated in System Monitoring tab
Hello Team Mates,
I have installed SOLMAN 7.1 SP06, also we have completed the Managed system configuration.
Now while doing the configuration of system monitoring, I am not getting the any update related to HOST,
apart from its database. Instance monitoring is working properly.
solman_workcenter -->technical monitoring --> system monitoring --> monitor system,
Also in the solman_workcenter-> root cause analysis ->host analysis ; data is not getting updated.
Please guide us on the same, ASAP. Kindly check the attachment.
Thanking you in advance,
with best regards,
Deepak
Points will be rewarded to the right answers.hi,
outside recovery follow the steps here Outside Discovery on Solution Manager 7.1
And also Please check whether your host agents are working, you can done this in managed system configuration -> connect diag agents -> check host agent,
Please update.
Thanks
Jansi -
"Automatic Maintenance Certificate" is not updating satellite systems
Hi,
I want to activate Automatic Maintenance Certificate via solution manager to my satellite systems
Solution Manager is 7.01 at SPS23
Satellite systems are all on Netweaver 7.01 SPS06
Right now, Solution Manager receives automatically the maintenance certificate.
Unfortunately, my satellite systems do not receive it.
on my satellite system (PRD - ECC 6.04), in SDCCN, I see that job "Maintenance Package" shows these messages:
Maintenance Package completed
Updating license data completed from destination [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data not possible [Maintenance Package]
note that I reviewed completely SAP note 1280664 to no avail.Hi Daniel,
This is exactly the solution.
I finally also found another solution from http://forums.sdn.sap.com/post!reply.jspa?messageID=9122507#9122507
In managed system, goto SDCCN, browse through the menu options to reach task specific settings and then edit the RFC destination settings.
In RFC settings you get to see RFC of SM system.
Make the SM destination as master destination. Tick the Master checkox.
Thanks for your help. -
Support Pack Status not updated in System Component Information
Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
SuhailFor future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support -
I can not update the system - libjpeg-turbo problem
The error:
libjpeg-turbo: /usr/bin/tjbench exists in the file system
libjpeg-turbo: /usr/include/turbojpeg.h exists in the file system
libjpeg-turbo: /usr/lib/libturbojpeg.a exists in the file system
libjpeg-turbo: /usr/lib/libturbojpeg.so exists in the file system
Packages (120): alsa-lib-1.0.27.1-1 alsa-utils-1.0.27.1-2 apache-ant-1.9.1-1 asciidoc-8.6.8-2 avahi-0.6.31-9 blender-8:2.67a-2 cddb_get-2.27-7 chromium-bsu-0.9.15.1-1 cmake-2.8.11-1 cpupower-3.9-3 cracklib-2.8.22-3 cronie-1.4.9-4 cups-filters-1.0.34-4
fakeroot-1.19-1 fontconfig-2.10.93-1 gambas3-devel-3.4.1-3 gambas3-gb-compress-3.4.1-3 gambas3-gb-dbus-3.4.1-3 gambas3-gb-desktop-3.4.1-3 gambas3-gb-form-3.4.1-3 gambas3-gb-form-dialog-3.4.1-3 gambas3-gb-form-mdi-3.4.1-3
gambas3-gb-form-stock-3.4.1-3 gambas3-gb-image-3.4.1-3 gambas3-gb-net-3.4.1-3 gambas3-gb-net-curl-3.4.1-3 gambas3-gb-qt4-3.4.1-3 gambas3-gb-qt4-ext-3.4.1-3 gambas3-gb-settings-3.4.1-3 gambas3-gb-signal-3.4.1-3 gambas3-gb-web-3.4.1-3
gambas3-gb-xml-3.4.1-3 gambas3-runtime-3.4.1-3 gawk-4.1.0-1 git-1.8.3-1 gmp-5.1.2-1 gpm-1.20.7-3 graphite-1:1.2.2-1 harfbuzz-0.9.17-2 hdparm-9.43-2 icu-51.2-1 imagemagick-6.8.5.7-1 intel-dri-9.1.3-1 intel-tbb-4.1_20130314-1 inxi-1.9.7-1
jdk7-openjdk-7.u21_2.3.9-4 jfsutils-1.1.15-4 jre7-openjdk-7.u21_2.3.9-4 jre7-openjdk-headless-7.u21_2.3.9-4 kbd-1.15.5-4 kdepim-runtime-4.10.3-2 krb5-1.11.2-4 kvirc-4.2.0-3 lib32-alsa-lib-1.0.27.1-1 lib32-dbus-core-1.6.10-1
lib32-fontconfig-2.10.93-1 lib32-llvm-amdgpu-lib-snapshot-20130403-2 lib32-mesa-9.1.3-2 lib32-mesa-libgl-9.1.3-2 lib32-sqlite-3.7.17-1 libjpeg-turbo-1.3.0-1 libkgapi-2.0.0-1 libldap-2.4.35-4 libproxy-0.4.11-2 libquicktime-1.2.4-6
libreoffice-base-4.0.3-3 libreoffice-calc-4.0.3-3 libreoffice-common-4.0.3-3 libreoffice-draw-4.0.3-3 libreoffice-gnome-4.0.3-3 libreoffice-impress-4.0.3-3 libreoffice-kde4-4.0.3-3 libreoffice-math-4.0.3-3 libreoffice-postgresql-connector-4.0.3-3
libreoffice-sdk-4.0.3-3 libreoffice-sdk-doc-4.0.3-3 libreoffice-writer-4.0.3-3 libsasl-2.1.26-3 libwbclient-4.0.6-1 libwps-0.2.9-1 libxau-1.0.8-1 linux-3.9.3-1 linux-headers-3.9.3-1 llvm-amdgpu-lib-snapshot-20130403-3 man-db-2.6.3-3
mdadm-3.2.6-4 mesa-9.1.3-1 mesa-libgl-9.1.3-1 mlt-0.8.8-4 mpg123-1.15.4-1 mplayer-36285-1 net-snmp-5.7.2-7 openssh-6.2p2-1 pam-1.1.6-4 pciutils-3.2.0-3 perl-5.18.0-1 perl-xml-parser-2.41-4 poppler-0.22.4-1 poppler-glib-0.22.4-1
poppler-qt-0.22.4-1 popt-1.16-6 postgresql-libs-9.2.4-2 procps-ng-3.3.7-2 python-3.3.2-1 python2-distribute-0.6.40-1 samba-4.0.6-1 skype-4.2.0.11-1 smb4k-1.0.7-1 smbclient-4.0.6-1 sqlite-3.7.17-1 subversion-1.7.9-6 systemd-204-2
systemd-sysvcompat-204-2 ucommon-6.0.5-1 udisks-1.0.4-8 udisks2-2.1.0-2 wireless_tools-29-8 xf86-video-intel-2.21.7-1 xfsprogs-3.1.11-1 xorg-xdpyinfo-1.3.1-1
KDE 4.10.3
Kernel 3.9.2-1
Any thoughts?https://bbs.archlinux.org/viewtopic.php … 6#p1015486
There is a reason why that post is stickied prominently in the newbie section. Please search before posting.
Last edited by WonderWoofy (2013-05-26 20:43:23) -
I just got my new macbook today but i just found the system is not updated
I got my first macbook today but i just found the system is not updated ( the system is OS X 10.8 (12A269), is that normal? now, im trying to update the system but I got three times unsuccessful updates. Should I pay for it? If I should, how come there is no pay option?
You shouldn't have to pay for anything - if you have 10.8.0 installed, you should just be able to go to Software Update under the Apple menu and the system should prompt you to install 10.8.2. If that doesn't work, contact the App Store support site - http://www.apple.com/support/mac/app-store/.
While waiting to hear from the App Store support folks, you can always download the 10.8.2 combo and install it - http://support.apple.com/kb/DL1581 - and then be sure to install the supplemental update - http://support.apple.com/kb/DL1600.
Good luck,
Clinton -
AD System Group Discovery not updating System OU Name on computer object when computer moves OU
2 related questions.
1. We have noticed that computer objects (active clients) in ConfigMgr are not getting their System OU Name discovery data updated when a computer account is moved from one OU to another, and AD System Group Discovery runs. Since we are basing some of our Software Updates collections on AD OU name, these systems are not falling into their required collections.
2. On a few occasions we are also seeing duplicate computer objects being created. One new record from AD System Discovery, which contains the correct 'new' System OU Name, and one 'old' computer object from before the computer account was moved to a different OU in AD. The heartbeat discovery of this second object is still updating e.g. showing new heartbeats, but the computer object still shows the old System OU Name from before the computer account was moved in AD. If we delete both objects and run a Discovery Data Collection Cycle from the client, and AD System Group Discovery, then we get one new record with the correct 'new' set of System OU names.
This duplicates issue is happening in both our Central Primary Site and our other child Primary site. Both sites are set to create new client records for duplicate hardware IDs, and there is a possibility we're seeing the duplicate records on machines that have been re-imaged and redeployed at some point.
It's my understanding that it is AD System Group Discovery that updates the System OU Name property on client objects. We have this set to run every 4 hours. I'm not seeing any errors in the adsysgrp.log. Any idea why discovery is not updating the System OU Name information when a computer account moves OU? As far as I understand it, nothing additional is required to happen from the client end for this property to get updated.The only thing I can think of would be ad sys group discovery not running at the site where the client is assigned to?
"Everyone is an expert at something" Kim Oppalfens Configmgr expert for lack of any other expertise. http://www.scug.be/blogs/sccm
HI Everyone..
ANy reply or correct answer to this question???
Same problem even i have. Duplicate machine names created when machine moved to different sites.
And also, AD sys group discovery running on all the sites (i have 4 sites).
System Security analyst at CapG -
Overhead Cost Element not update
Hi,
I have created Cost sheet , assigned to Production plant, for FG Material,
Overhear updated when run SCE, and production order also updated but after settlement secondary GL a/c with Credit cost center not update. in system show no value in particular overhead
Please help me
Thanks & regards.
Vinu.Hi Ajay,
Yeah I have maintained inventory valuation (Fixed and variable costs)
overhead cost should be calculate, Fixed and variable cost so i have maintained (Fixed and variable costs)
in cost sheet i have maintained only plan rate not actual.is it ok ?.
Thanks & Regards.
Vinu,
Edited by: vinutha1010 on Oct 25, 2010 7:37 PM -
FIFO valuation at period end + consideration of valuation type
Hi,
I use FIFO valuation to valuate my raw materials at period end.
Some raw materials are split valuated, e.g. the same material number can have valuation type NEW or REP (repaired). All material movements (e.g. goods receipt) happen for each valuation type at different cost (REP is much cheaper than NEW). Also purchase orders are created at movement type level.
Unfortunately FIFO valuation does not work based on valuation type. Thus the FIFO value can be a wrong mixture of valuation type values for each material.
Example: Starting with zero quantity/value at period begin
Posting date
Movement type
Valuation type
Quantity
PO-Value/MAP
05.07.2014
101
NEW
500
500 EUR
10.07.2014
101
REP
1000
100 EUR
15.07.2014
261
REP
-500
-50 EUR
Total at period end
1000
550 EUR
The stock value of this 1000 items is 550 EUR, the 500 items NEW have a value of 500 EUR, the 500 items REP have a value of 50 EUR.
FIFO result:
The 1000 items at month end are FIFO valuated based on the last goods receipt happend on 10.07.2014 which is exactly 1000 items (not considering the different valuation types).
Thus the FIFO value is only 100 EUR although the correct value should be 550 EUR.
I didn’t find a solution in SAP standard (FIFO related table MYMP does not contain BWTAR (valuation type) whereas table MYMFT does but its always empty in my case), but is there a solution for that case, maybe I missed it in some EhP’s?
Best regards, ChristianHi,
There is no such normal MRP run.
Whenever we take MRP run, system will consider only the main material and not the split valuation type.
THe main concept of using split valuation is only for that itself. It is there for planning irrespective of valuation type.
But if you want the system to behaive in such fashion that it should plan one part and not he other then use different material code instead of split valuation. Define these two material codes as alternative and give the usage probability as 0% and 100%. MRP will consider only that material which is having 100% usage probability.
Regards
Amit Parkhi -
Inventory & Distribution GL codes are not updating in balance sheet even th
I am facing one issue regarding Financial statement/Balance Sheet GL accounts updation.
100177-Inventory Repairs & 200402-Distribution GL accounts(Both are Balance Sheet items) are assigned In Financial Statement Version But they are not updating in the B/S Under Respective Heads.They are showing under Un-assigned Accounts.Plz help me that how can i bring this GL acocunt to under Respective Heads...
It would be a great help for me...plz spend some time on this issue...
Regards
Sap GuruHello Rony,
Good question.
The design of the system is such that RE is updated during the year end closing only. (At the end of the accounting year). During the year RE is not updated but system shows in the FSV the difference between assets & liabilities = to current yearu2019s profit or loss (up to the period).
Donu2019t worry. Just look at any standard FSV available in the system, copy it and edit it as per your requirements.
Cheers
Ambadas -
Exchange rate not updated with posting date, translation date updated
Hi,
I have the follwoing problem in F110. Currency documents are posted with exchange date of the docuemnt entry date. Translation date is updated with Posting date, just exchange rate is not updated. the systems calculates according entry date. Why entry date is one day before the date of posting, I cannot understand. The system takes the exchage date from entry date, which is one day before (docuemnt, posting and translation date)
Thank you,
DesimiraHello,
This means, that the exhange rate is missing your local currency vs USD in the system. Your Business Partner or any of items you are adding to the invoice is using USD (price list or customer is in USD).
My tip is some of the items has USD price set or USD Purchase price used.
DO the following:
Check the POsting date of your invoice
Go to Administration -> Exhnage rate, and locate the posting date and USD from the matrix, and enter the rate.
Post your invoice.
it will work
Regards
János. -
(SOLVED) can not update ArchLinux for about three weeks
Hello, I can not update my system for at least 3 weeks, someone could point me to the right direction? thank you in advance !
[bier@laptop-arch ~]$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core 103.8 KiB 58.7K/s 00:02 [######################] 100%
extra 1383.7 KiB 58.3K/s 00:24 [######################] 100%
community 1650.0 KiB 58.1K/s 00:28 [######################] 100%
archlinuxfr 32.9 KiB 27.5K/s 00:01 [######################] 100%
:: Starting full system upgrade...
:: Replace gnupg2 with core/gnupg? [Y/n] y
resolving dependencies...
warning: dependency cycle detected:
warning: util-linux will be installed before its udev dependency
warning: dependency cycle detected:
warning: rhino will be installed before its jre7-openjdk-headless dependency
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: jogl: requires java-runtime
Last edited by mabier (2012-03-30 08:15:42)jasonwryan wrote:There is a heap of threads about this java thing already - please search the boards before posting...
yes, I find the solution here :https://bbs.archlinux.org/viewtopic.php?id=137836, thanks. -
Nautilus will not Start after system update
I just updated my system with "pacman -Syu" and it now will not open the nautilus file manager. Looking inside the journal it shows the following error:
gnome-session[647]: Window manager warning: Log level 16: AT-SPI: Error in GetItems, sender=(null), error=Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Here is a list of files that was just upgraded:
[2014-08-31 15:27] [PACMAN] Running 'pacman -Syu flashplugin'
[2014-08-31 15:27] [PACMAN] synchronizing package lists
[2014-08-31 15:27] [PACMAN] starting full system upgrade
[2014-08-31 15:28] [ALPM-SCRIPTLET] >>
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2014-08-31 15:28] [ALPM-SCRIPTLET] >>
[2014-08-31 15:28] [PACMAN] installed flashplugin (11.2.202.400-1)
[2014-08-31 15:28] [PACMAN] upgraded avahi (0.6.31-12 -> 0.6.31-13)
[2014-08-31 15:28] [PACMAN] upgraded bash (4.3.022-1 -> 4.3.024-1)
[2014-08-31 15:28] [PACMAN] upgraded bluez (5.22-1 -> 5.22-2)
[2014-08-31 15:28] [PACMAN] upgraded poppler (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded cups-filters (1.0.57-1 -> 1.0.58-1)
[2014-08-31 15:28] [PACMAN] upgraded libgcrypt (1.6.1-1 -> 1.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded libsystemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded systemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded device-mapper (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded libtasn1 (4.0-1 -> 4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gnutls (3.3.6-1 -> 3.3.7-1)
[2014-08-31 15:28] [PACMAN] upgraded gstreamer (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base-libs (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-libav (1.4.0-2 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-bad (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] installed zita-alsa-pcmi (0.2.0-1)
[2014-08-31 15:28] [PACMAN] installed zita-resampler (1.3.0-2)
[2014-08-31 15:28] [PACMAN] upgraded jack (0.124.1-1 -> 0.124.1-3)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-good (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gtksourceview3 (3.12.2-1 -> 3.12.3-1)
[2014-08-31 15:28] [PACMAN] upgraded imagemagick (6.8.9.6-1 -> 6.8.9.7-1)
[2014-08-31 15:28] [PACMAN] upgraded libnl (3.2.24-1 -> 3.2.25-1)
[2014-08-31 15:28] [PACMAN] upgraded libpcap (1.5.3-1 -> 1.6.1-1)
[2014-08-31 15:28] [PACMAN] upgraded libtracker-sparql (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded libwacom (0.9-1 -> 0.10-1)
[2014-08-31 15:28] [PACMAN] upgraded libxkbcommon (0.4.2-1 -> 0.4.3-1)
[2014-08-31 15:28] [PACMAN] installed thin-provisioning-tools (0.3.2-1)
[2014-08-31 15:28] [PACMAN] upgraded lvm2 (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded man-pages (3.70-1 -> 3.71-1)
[2014-08-31 15:28] [PACMAN] upgraded ntp (4.2.7.p446-2 -> 4.2.7.p465-1)
[2014-08-31 15:28] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-08-31 15:28] [PACMAN] upgraded pacman-mirrorlist (20140706-1 -> 20140823-1)
[2014-08-31 15:28] [PACMAN] upgraded poppler-glib (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded spice-gtk3 (0.24-3 -> 0.24-4)
[2014-08-31 15:28] [PACMAN] upgraded systemd-sysvcompat (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded tcl (8.6.1-1 -> 8.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded telepathy-farstream (0.6.1-1 -> 0.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded tracker (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded tzdata (2014e-1 -> 2014f-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk (2.4.4-1 -> 2.4.5-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk2 (2.4.4-1 -> 2.4.5-1)
would any of these packages cause this? Thanks.
Last edited by djmwj1 (2014-08-31 23:15:33)Please edit your post to use BBCode Code tags around program output. That reference link is also below every post box on the forums. Thanks.
Maybe you are looking for
-
"****Error from PSA****" error message when loading InfoCube
Hi all, I am getting the following error message when loading transaction data to an InfoCube. ***Error from PSA*** This is not MD or Hierarchies (like previous messages in the forum) Please advise. Thanks, Miki
-
Problem faced in running the process chain
Hi All, I am having a process chain having few warning.. But I want to schedule that process cahin but I am not able to do so, when I schedule it , it throws a message as "chain changed, schedule in display mode not possible".. So how can I schedul
-
I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then cl
-
Cannot fully boot after power outage, help please
After a power failure I have tried to reboot. It takes a long time, but eventually I get to the blue screen with the progress bar. After another long time, the screen goes black and I get the message in white text: Darwin/BSD (richards-power-mac-g5.l
-
Good Day, I am a little perplexed about something. I have a MS 2008R2 domain, with windows 7 clients and we are switching from log-in scripts to using the GPO preference to map folders. The GPO is build with multiple OU's and different GPO's per OU