Figure out cropped photo's new Aspect Ratio

I am looking to get a custom sized metal print of a photo that I cropped in Lightroom. For custom sizes, the printing software requires that I enter the height/width in inches. How can I figure this out in Lightroom?
I know that, in the crop window, I can select a certain or enter a custom aspect ratio and it will constrain the crop box to that aspect ratio. But how do I do the opposite? That is, when I free-hand crop using the crop tool, have it tell me what the aspect ratio the photo now falls into is, even if it involves decimals?

The Info Overlay (toggle "I") can be set up to show you the post-crop dimensions in pixels. The same information can be had in the Metadata panel in the Library module. If you know the pixels and the pixels per inch (ppi) at which it will be printed, the size in inches is easy math. If you really want the aspect ratio (which is long side divided by short side), do the division yourself. A 3155x3786 pixels image has a ratio of 1:1.2 or 5:6 and at 300 ppi would make a 10.517 x 12.62 inch print.

Similar Messages

New aspect ratio crop.

I have a PC using Windows 7. Today I have upgraded Lightroom 5 from Lightroom 4. When using the new Aspect Ratio crop the guides appear as expected. When I go to the top centre area of the crop, instead of getting the black lines with the arrows (as you do with the corners) all I get are two white arrows. This means I can only drag the entire crop box to a smaller size. The line will not move down to the aspect guide as you expect. Can someone inform me as to what the issue is?

If i understand your problem correctly, you have to unlock the padlock in the crop tool to get this behavior.

Digital Photo Professional and Aspect Ratio on DPP Version 3.13.51 (3.13.51.0) OS X version 10.8.5

I recently up graded to DPP Version 3.13.51 (3.13.51.0) and it seems have lost the capability when cropping using the trimming tool to convert the cropped images to their cropped aspect ratio.
Shoot events with two cameras 6D and 50D. Always shoot RAW. At the end of an event may have as many as 1000 images to edit and convert to small sized JPGs for display on WEB. I bring in the RAW, select the RAW images to be converted, then from the Collection TAB edit the RAW. Editing may include cropping a 3:2 image to 4:3 or 5:4 or 2:3 or 3:4 or 4:5 or Custom. Once I have completed the editing and cropping I apply the BATCH Process to convert the RAW images to JPG and resize and rename. Here is where the issue appears. Before upgrading to DPP 3:13 I would use the following conversion selections :
File Format Exif- JPEG
Image Quality 10 Embedded ICC Profile
Resize (in Resize I would always select )
900 pixel Width and 600 pixel height with Lock Aspect Ratio
Then would name the file
With those parameters the converted and saved images would convert to the proper sizes with proper Aspect Ration as Cropped and Trimmed. I would always line up the images so that the 3:2 ratio would show in the selection window (5472 x3648) then I would enter the new desired size (900 x 600) . The 3:2 images would convert to 900 x 600 and the images cropped to 5:4 Aspect Ratio would convert for example to 642 x 514 (the proper ratio for 5:4).
With the new version 3:13 the image cropped to 5:4 also is converted to 900 x 600 rather than the desired 642 x 514.
This is a real conundrum for my workflow. It works the same way even if I uncheck the Lock Ratio Option on the Resize command options.
How can I fix this? If uninstalling and reverting back to the older version of DPP is my only solution, what are proper steps for uninstall and reinstall of older version and maintain data structure.
I have Lightroom but have never been able to get a workflow as efficient as the DPP flow for converting hundreds of RAW to small cropped JPGs.
Thanks for your help.
Don
Solved!
Go to Solution.

I don't use DPP enough to help you with your issue. But Lightroom is really great program for batch processing. It is much much better than DPP, so you may want to look at it again since you arealdy have it.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

TS2446 i cant remember the answers to my security questions. i have reset my password and added the recovery email account but still cant figure out how to purchase new content. it asks me the same security questions. how do i fix this?

i cant remember the answers to my security questions. i have reset my password and added the recovery email account but still cant figure out how to purchase new content. it asks me the same security questions. i also have a temp pin. how do i fix this?

If you've just added an address to your account then it will be an alternate/secondary email address, a rescue email address can only be added by answering 2 of your security questions. If you already had one on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email addressthen you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

How to crop to a specific aspect ratio, then resize to specific size?

HI,
I need a running start, could someone please help me accomplish a specific task.
1) I need to be able to restrict a crop tool to a specific aspect ratio, then resize the cropping tool as I like to make my selection.
2) After, I need to resize the image to a set size... (so all my pictures wind up the same size.)
After I would normally set my text the way I like it and add text to every picture (so it is the same size in all photos.) and save them.
I do this in Paintshop with ease, but do not see the kind of controls on the cropping tool, or a place to resize an image other than the save.
I just purchased Photoshop/Lightroom so I am in this with both feet, I could really use the help to get started in this because I need to work on this now or or go back to Paintshop until I can figure it out when I get the time.
Thanks,
It is not easy to ask for help.
Kevin

OK, first a basic explanation: LR is not like Paintshop or Photoshop because it is a Raw converter and all Raw converters work non-destructively. This means that any edits that you set in the Develop panel are not actually carried out on the original image file, but rather only recorded for future reference. That future moment comes when you export (create and output) a new tif, psd or jpg file, send an image to Photoshop or some other secondary editor, or send the image to a printer.
Now for the cropping: Select the crop tool in the tool bar under the Develop histogram. A drop-down menu offers a selection of the more common aspect ratios or you can set a custom ratio. Use the X key to toggle between landscape and portrait orientations. Set the crop box to the size and location you want by dragging the corners and close it. The crop is recorded in the catalog database file and this info will be used when you export the image. Because no actual cropping and/or resizing is done until export, the resizing instructions are on the Export dialog. This way the same crop configuration can be used with differently resized exports. Tick the Resize box and put in the pixel dimensions you want. Alternately, put in a size in inches or centimeters and a pixels per inch (ppi) resolution and LR will calculate the pixel dimensions. If you are resizing, I'd highly recommend also enabling Output Sharpening. It is interactive with the resizing and automatically does the optimum sharpening for the amount (and type) of resampling being done.
If you want a number of images to be the same size, export them all together by, after editing and cropping them, selecting them all in the Library grid or the filmstrip and then running the Export dialog

Video asset in button cropped - Unable to match aspect ratios

I am using the Apple "Light Frame" button and linking an mpeg2 video asset to that button to look like active, mini 16 X 9 plasma televisions for my scene selection menu. Unfortunately it insists on cropping out much of my mp2 video image. Following the instruction in DVDSP4 manual on pages 275-76 only moves my image L to R and never shows me the whole image. The same seems to be the case using the "Light Frame" drop zone template. Am I completely going about it using the wrong method? How can I successfully match the aspect ratio of both the button's area and the associated asset?
Thank you for helping this poor forum newbie!
Dual 2.5 PowerPC G5 Mac OS X (10.4.3) 2.5 GB SDRAM

I have found that if I drag & drop a video asset to the menu and select "Create button and track" then I can correctly resize the thumbnail video to fit inside the frame of the button template while keeping the 16X9 aspect ratio. That works out very well except for the desired animated effect of the "Light Frame" television turning on and off becomes covered. Does anyone know of a better solution for creating a television thumbnail menu effect?
I'm new to this and would appreciate any help available. I've searched the forums over and found no posting on this.

Marquee or Crop Box showing multiple aspect ratios (in CS2?)

Hi, I use PS CS2 and use a lab that prefers our images be in a 4x6 aspect ratio. At times I crop photos to minimize dead space and want to do so such that the final image can still be printed as a 5x7 or 8x10. I'm wondering if there is some sort of add-on to CS2 that would let me crop at 4x6 but have the crop box show extra lines that represent a 5x7 and/or 8x10 aspect ratio while making my selection. ExpressDigital Darkroom has this type of preview - just wondering if it's available for CS2. Thanks in advance for responses.

No. Crop is a core tool, not a function. Any such coding would have to be done by Adobe themselves, as I understand these matters. Maybe there is a dedicated cropping filter out there somewhere, but as someone, who doesn't qualify as a Photoshop power user, I'm not aware of it, not even remotely. Sorry.
Mylenium

Cropping with 4:3 aspect ratio

I have a 1920x1080 video that I want to crop to a 4:3 aspect ratio.
I'm working with compressor 3.
When I set "crop original" to "4x3 1,33:1", I cannot manipulate the cropping. It is fixed to left=240, right=240, top=0 and bottom=0.
This results in 1440x1080 4x3, that's correct. But what I'd like to do is crop the top and bottom, too, while keeping the 4:3 aspect ratio.
How do i do that?
When I set "crop original" to "custom" (I hope I translated that correctly), cropping left, top, right and bottom is possible. I manipulate the red rectangle in the preview window and the cropping changes accordingly. Now how do I tell compressor to keep the 4:3 aspect ratio while manipulating/zooming with the red rectangle? I don't want to calculate the cropping, this is way too cumbersome.

To elaborate on my answer this morning (I was running late to a meeting):
Once you know the cropped height, you could let the app do some of the math by choosing Custom 4:3 in Dimensions and entering the new number. t will calculate the width for you. Then in the Crop section you need to enter the difference between your source frame width (1920) and the width that Compressor calculated and then divide the difference by two to get the other padding value.
There is, unfortunately, no completely automatic way that I know of to do it.
Russ

Organization: Figuring out what photos are organized into albums

I can't seem to work out a straightforward way of organizing photos once I import them into Aperture 1.5. I shot 2Gb of shots today and imported them. As I start to create Albums within my Project, I drag them to their appropriate places. But sometimes I'll miss one or get interrupted by a phone call, etc.
Or I'll start out with five albums of different categories, say Front Façade, Interior Lobby, etc. (architectural shots). Then I realize that I've got so many Stair shots that I want another album just to keep those organized. But then some shots are stairs in the lobby and I can't figure out if I've put them in one of the albums or neither. I have to scroll through tons of shots to figure it out. It's always confusing.
Has anyone figured out a good workflow for bringing photos in and ensuring that each actually winds up in an album?
PowerBook G4 17 Mac OS X (10.4.8)

I've finally figured out the solution to tracking which images have been 'assigned'...it's through the use of keywords and smart albums, not regular albums. It also lets you know whether you've missed assigning any images:
Create a Smart Album called "No Keywords". In the Search HUD that comes up when you do this, click on the "+" drop-down menu and select "IPTC". Click the checkbox next to the new IPTC line that's added to your search criteria, and select "Keywords" and "is empty" from the two drop-down menus. By using this or the "is not empty" or the other criteria in different/multiple combinations (you can add the IPTC line more than once), you can sort for anything.
Once you've set this up, start applying keywords to images. They will 'disappear' from this Smart Album. When the Smart Album is empty, you've assigned a keyword to everything. Keep this Smart Album in case you import other images or to check periodically to see if any images have been 'orphaned'.
Then use your keywords list to create Smart Albums that have keywords singly or in combination. I do this now and don't create regular albums at all.
One great piece of advice I've come across and will repeat here is that it's REALLY best to create ALL your keywords BEFORE you start applying them. In my first couple of projects I created them on the fly and realized that they were not perfect, started modifying, realized that some images needed more specificity, etc. Simply put, I made a mess. Now as I scan through an imported shoot I create the keywords first. Then I apply all the keywords I've made before creating any new ones or renaming ones I created in the first round.
Only then, once all the above-mentioned Smart Albums are created, might I add or adjust keywords. At this point it won't throw a wrench into the works and make me lose my bearings.
I'll continue to improve my workflow, but this finally works well for me, and it's pretty time-efficient.
Anyone have any gems to add to this thread before I mark it answered?
Message was edited by: Erick Mikiten

Finding images cropped to a particular aspect ratio?

Hi,
Is it possible to search for images based on their cropping aspect ratio?
Andrew.

Inability to find images based on cropped aspect ratio is definitely pretty annoying. If I want to print a batch of 4x6 photos, I must now select the pictures I want to print and make sure they are indeed 2x3 or 4x6. This is just extra chore that would have otherwise been avoided.
What makes it really irritating is that LR already has this information. It can already display image based on cropped dimension, ie: 4752x3168, all it has to do is divide those two numbers and convert to a the smallest whole numbers, and you get the ratio of 3:2.
Furthermore, LR doesn't even have to do this calculation on every image. If the image was cropped using a pre-defined aspect ratio in the cropping tool, such as 1x1, 8x10, this information should already be part of the catalog. If you select an image and open the cropping tool, it shows what aspect ratio the image is cropped to, such as 8x10, 2x3, etc. I would assume it is easy to allow filtering/search based on the tool used.

How to crop canvas and change aspect ratio?

I'm working on a project shot with an old camera from the 70s. I used that camera but recorded the signal on my mini dv camera. Now I have a black border on the right side of the image.
This project is going on the Web, not TV. How can I crop the canvas (and change the aspect ratio) without a black border? I know there's a crop feature in the motion tab, but that results in same aspect ratio with black border. Is this possible?
(I don't care if the aspect ratio is non-standard, and I don't want to letterbox.)

If you are going to the web (what means you'll downscale at the end) and you shoot using an old camera, the loss of quality of the upscaling probably means nothing in your final web encoding.
You can make a test upscaling just some seconds of your movie an encoding it for the web to check the final quality.
Hope that helps !
Alberto

Is it possible to embed new aspect ratios into your quicktime movies?

Well my subject line explains it all really. I was wondering if there was a way to embed the aspect ratio in my quicktime movies instead of manually resizing them whenever i open them to a ratio that suits the content better.
thanks

I was wondering if there was a way to embed the aspect ratio in my quicktime movies instead of manually resizing them whenever i open them to a ratio that suits the content better... I'd also love to know the answer to this. It's dead easy to amend an anamorphic movie to play at 133% of original width, but can a QT movie be told to open in that ratio the next time?
Yes, however, to some extent, the method to be employed depends on your media player. QT 7 (and similar applications), for instance, will open using the "Current Size" display dimensions contained within the file. These dimensions are easily changed in the Properties window, using QT 7 Pro while the "Keep Aspect" switch is turned off and do not re-compress the data but may re-write the date to an MOV file container. On the other hand, applications that rely on the embedded PAR flag/value (like QT X, iMovie '08/'09', etc, must be re-compressed using the correct Anamorphic setting to re-embed the correct flag. When both settings are in agreement, an anamorphic file will open correctly in all players. However, where they differ, the files will open correctly in one type player and incorrectly in the other type of player.

Maintaining crop in 4:3 aspect ratio.

I shot a commercial in Widescreen and the broadcast company that will air the spot needs it in 4:3 aspect ratio.
I did a print to video and the footage plays well on a widescreen and tall(squished) on a 4:3 tv.
How can I output this so it will play on the 4:3 tv as a widescreen image with the black bars on top and bottom?
Please help --quick deadline.
TIM

Thank You -- Will try. Will that give me a black box on top and bottom as oppsed to "just looking right" in the 4:3 tv.
It will look widescreen...correct?
Is there a way to make it look just standard 4:3 on a TV ?
THanks....YOur always right on the mark.I appreciate your info.
TIM

IPhone 4 HDMI output for photo slideshow. Aspect ratio squished?

Bought the Apple Digital AV Adapter and tested it today. Hooked it up via an HDMI cable to a little HD TV. Videos (YouTube or in Photo Gallery) display as they should, in widescreen just as they do on the screen. However, when I start the photo slideshow the photos are squished to the center. A full landscape photo that takes up the whole iPhone screen is squished into a square in the center of the screen. Vertical pictures are also squished to the center, distorting the ratio. When the slideshow comes to a video in my library, it displays correctly.
I talked to Apple by chat and phone and they hadn't heard of this. Can't find anything on the web. I am running the newest iOS 5. There aren't any settings to adjust the video output in settings. If the videos were squished also it would make sense...but they aren't so it doesn't.
Anyone have any ideas?

thanks for the tip, i am extremely frustrated with imovie right now. i have a slideshow of a wedding i went to that i desperately want to share but i cant export to a good enough quality. does that export setting put the video in a format you can use on youtube or vimeo?
thanks!

Aspect Ratio UNlock?

I'm using Keynote '09 and I can't figure out how to unlock the aspect ratio on images I paste onto a slide. I know that pressing "shift" locks the aspect ratio but how do I unlock it? I have a presentation due next week and being able to figure this out will really enhance my slides. Thank you for your help, it's much appreciated.

There are two approaches available:
resize: click Inspector in the toolbar, click the Metrics inspector button, deselect “Constrain proportions” then drag the corner handles to resize
mask: select the image and then click the Mask button in the toolbar (Format > Mask) then reposition and resize the mask and image

Figure out cropped photo's new Aspect Ratio

Similar Messages

Maybe you are looking for