Filcking right a little bit on trackpad makes webpages stop working.

Sorry if my English is broken...
I'm using Safari 7.0.3 on Mac OS X 10.9.2 installed MacBook Pro.
The trouble is just as menthoned in the title.
If you have Majic Trackpad or built-in trackpad, try these steps... These steps make the problem happen.
Open Safari.
Visit some webpage.
Then visit another webpage.
Finally, using trackpad, flick rightwards a little(as you do when you go back to the previous page, but do it just a little bit & release your finger quickly).
And when those steps 'work', following horrible glitches will happen:
The webpage you're visiting is shifted slightly to the right and the webpage you were visiting before can be seen a little. (This is the sign of 'success!')
The webpage stops working. You will never be able to write into a textbox on that page and so on.
You can't visit websites in that tab anymore. You can see webpages being loaded, but nothing happen in your tab.
Trackpad scrolling in other tabs is blocked until you close the tab in question.
I'm surprised because I've never had such a problem before...
So, the question is: What is this caused by? And how can I prevent it? (Well, trying not to flick a little IS one solution, but not this time XD)

There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.

Similar Messages

Trackpad and Trackpoint stop working all the time

Hi Lenovo!
I'm loving my thinkpad tablet! Only issue I have really had so far is that the trackpad and trackpoint stop working every once in a while... (as in once a month they will suddenly stop working). Then I install a driver, they start working again, only for the same problem to turn up after some more time has gone by. Last time this happened, installing the driver didn't help, nor did doing windows restore, which was very worrisome...
I've had this laptop for less than a year so it is still under warranty, but I was wondering if there is a quick fix?
Much appreciated!
Ilana

If two different ATVs are having the same problem on the same TV, the problem could be the HDMI cable or the HDMI port on the TV.

When i right clic in office word 2011 the application stop working ?

When i right clic in office word 2011 the application stop working ?

Post here:
http://mac2.microsoft.com/help/office/14/en-us/word/

I can no longer edit song and album information in iTunes. I right click on the album, the window opens with "get info", "rating", etc., but none of it operates. What did I change to make it stop working?

I can no longer edit album or song information in iTunes. I right-click on the album (or song), and the window opens with "get info", "rating", etc., but none of it operates. It won't get or save album art, anything. What have I changed to make it all stop working?

You are describing an iTunes problem, not an iPod touch problem. Try posing in the iTunes forum.

Wine makes mic stop working.

A bit of a niche problem. But my mic stops working in linux apps when my wine game application is started. Closing the wine application makes the mic work again.
It's an inboard mic. I don't use the sound from the wine application so I don't need to preserve that functionallity. I just want my linux apps working.
My music programs work. (Output is fine just not input). And I couldn't see anything relevant in the wine configuration. If you need any more info just ask.
Tried in mumble skype teamspeak. It's all the same. Thanks.

Anybody?

Macbook Air Mid 13 TrackPad and Keyboard Stopped working.

Both trackpad and mouse work when I have to sign into my account; however, once I'm on my windows screen both stop working. It tries and searches for bluetooth keyboard and mouse. I don't know how else to fix this issue. Please help I have tried all recovery options and erased everything on disk utility ( i saved my files first ) . for now i have been using an external mouse and keyboard. I also had the newest software update os x yosemite but when i re installed os x it installed lion but still the same problem.

finally its fixed!! ...i went on the mac osx hints site...someone suggested resetting the pram and pmu...i was worried i wouldn't be able to hit the key combinations because of the whole keyboard thing...but apparently, my keyboard still worked until it got into os x...so i reset the pmu with shift-option-control-power while the computer was off...and voila...problem solved!!
thanks for all your help....you *******!! lol jk
peas

Maxbook air keyboard, trackpad and usb stop working

Hi everyone! i have a macbook air (early 2008) and it stop working the keyboard, the trackpad, and the usb port i think the bluetooth too becouse when i checked the hardware it doesn't appear i think is something wrong with the software becouse the ilumination of the keyboard still works but i can't use the restore disks becouse i don't have keyboard so i can't choose the start disk, any ideas what can it be? someone experience the same problem? Thanks

It's a common problem. I'm not aware of a fix yet.

I have a corrupt Photo file, that makes Aperture stop working properly.

I recently imported some of my old photos from a CD to the Aperture Library. Every time I open that project or try to work with any of those photos Aperture will stop working. (in a very aggressive way)
The viewer wont update.!
It wont make any change or save anything.!
I have to quit and restart Aperture to have it working again, I don't know what is wrong.
Any Idea?
Maybe new aperture .5 will fix this??
TKS
G5 quad Mac OS X (10.4.7) big ram

Another option would be to quit Aperture, remove the project from the Library using the Finder, reopen Aperture (the troublesome project will now be greyed out), throw the troublesome project out, and finally reimport the images back into Aperture. The only problem is you now have to re-do any adjustments etc. for that project. If he project has other images you do not want to re-do you could try just removing the problem import group, go back into aperture and then throw those images out, quit (you may have to force quit) Aperture and then restart Aperture. I did the above on a test Aperture library, but as usual you have to be carefull. Do not do any of this without first duplicating the troublesome library.

Dual screen configuration makes keyboard stop working on X

Hi. My computer is working just fine. And my video card has two outputs (Nvidia[GeForce 9600 GT] (rev a1)). I got a second monitor, and I was trying to configure Xorg to use the two of them in a dual screen configuration.
I tried creating the 10-monitors.conf file like described in https://wiki.archlinux.org/index.php/NV … e_monitors, and here is what happens. X does use the two monitors, and I can even see my mouse pointer moving from one to the other. But then my keyboard stops working, and so do the mouse keys, only moving the mouse around works.
I have the impression this is related to the missing InputDevices in the ServerLayout. Something in my configuration probably needs that still, if the ServerLayout gets explicitly configured. What should I do? Could this be related to HAL somehow? How do I turn off HAL without it trying to kill me?
Thanks.

I have been using nvidia's TwinView for a long time, currently with two different monitor sizes. There is no need to do anything with udev if you have your xorg.conf set up properly. Here's what mine looks like, though you will have to adapt it according to your hardware.
Section "ServerLayout"
Identifier "Dual Layout"
Screen "Screen0"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "on"
Option "AutoEnableDevices" "on"
Option "AllowEmptyInput" "on"
EndSection
Section "Monitor"
Identifier "Acer"
HorizSync 30-81
VertRefresh 56-76
EndSection
Section "Device"
Identifier "GeForce 210"
Driver "nvidia"
Option "NvAGP" "3"
Option "NoLogo" "1"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "TwinView" "true"
Option "SecondMonitorHorizSync" "24-70"
Option "SecondMonitorVertRefresh" "56-75"
Option "MetaModes" "1680x1050, 1600x900 @1600x900"
Option "TwinViewOrientation" "RightOf"
Option "WrappedFB" "true"
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "GeForce 210"
Monitor "Acer"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050" "1600x900"
ViewPort 0 0
EndSubsection
EndSection
It is best to let as much as possible be handled automatically, but getting two screens working properly requires a bit of tweaking.

Embedded Flash video makes links stop working

I have a strange problem.
I embedded a flash FLV video file into Dreamweaver site and I
published it.
All the links in my site works fine as long as I do not look
at the video page more than twice.
If I keep going back to look at the video page, some of the
links stop working.
Does anybody experienced this?
I made my website with Frontpage before and I embedded a WMV
video file to my page but I never had this problems.
This give me such a headache because if this keep happening,
I can,t make websites for my client.
Please somebody help me.
If you have to look at my site, my site is
http://www.1000arts.co.uk/theartoftaichi
and the video page is under the Classes drop down menu.
Thank you very much in advance.

Hi all
For those of your that may of experienced the same issue Cisco have a known bug for it which is fixed in version 5.3.
I will upgrade our version from 5.2.2 to 5.3 and let you know how it goes.
CSCth09724 - Video embed code doesn't work till auto-play is set to true for video
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth09724
As per the TAC engineers notes “Disregard the found-in/fixed-in notes. The bug was in 5.2.1 and I have confirmed that it is fixed in 5.2.3”
The hardware support notice for 5.2.3 is located below, so it’s worth checking the hardware version to ensure it’s compatible. If the server is not in the hardware list below, this means it will support 5.2.3.
Server Appliance
End   of Sale Date
Last   Date of Support
DMS   Support
MCS   7825-H2
30-November-2008
30-November-2011
Up   to v.5.2.2.x
MCS   7825-H3
13-March-2009
13-March-2012
Up   to v.5.2.2.x
MCS   7835-H1
13-September-2007
13-September-2010
Up   to v.5.2.2.x
MCS   7835-H2
13-March-2009
13-March-2012
Up   to v.5.2.2.x

ITunes makes keyboard stop working?

This is a brand new PC that was just built, running Windows 7 Professional (64-bit).
I have tried 3 keyboards, one wired and and two wireless, all USB (this computer doesn't have a PS/2 connector). All of them are fine on other PCs. The keyboard works fine until I install iTunes, then it stops working. When I reboot, the keyboard works in the BIOS, but as soon as I get into Windows, it stops working again. If I uninstall iTunes, it's fine again. Reinstall iTunes, again, no keyboard.
Any idea why this is happening, or suggestions for fixing it?
Thank you!
Cyn

I have been using nvidia's TwinView for a long time, currently with two different monitor sizes. There is no need to do anything with udev if you have your xorg.conf set up properly. Here's what mine looks like, though you will have to adapt it according to your hardware.
Section "ServerLayout"
Identifier "Dual Layout"
Screen "Screen0"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "on"
Option "AutoEnableDevices" "on"
Option "AllowEmptyInput" "on"
EndSection
Section "Monitor"
Identifier "Acer"
HorizSync 30-81
VertRefresh 56-76
EndSection
Section "Device"
Identifier "GeForce 210"
Driver "nvidia"
Option "NvAGP" "3"
Option "NoLogo" "1"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "TwinView" "true"
Option "SecondMonitorHorizSync" "24-70"
Option "SecondMonitorVertRefresh" "56-75"
Option "MetaModes" "1680x1050, 1600x900 @1600x900"
Option "TwinViewOrientation" "RightOf"
Option "WrappedFB" "true"
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "GeForce 210"
Monitor "Acer"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050" "1600x900"
ViewPort 0 0
EndSubsection
EndSection
It is best to let as much as possible be handled automatically, but getting two screens working properly requires a bit of tweaking.

Some trackpad functions suddenly stop working

Hello!
I have no idea what causes this, but when I'm working on my MacBook, sometimes a couple of functions of the trackpad suddenly stop working. The functions that stop working are always the same: all of the "More Gestures" found in the "Trackpad" system preferences. Just scrolling and clicking always continue to work when this problem occurs.
When I just log out and log in again or restart my MacBook it works again, however, this can get quite annoying when you have to do this all the time.
I cannot figure out what causes these functions to suddenly stop working. Does anybody know a solution for this?

Is your MacBook one with an easily removeable battery? Some users have noted that batteries, particularly older ones, sometimes expand and interfere with the trackpad. To test for this do the following -
Shut down your MacBook.
Remove the battery. Examine it for signs of expansion. If any are found DO NOT use it again.
Leaving the battery out, connect to the MacBook's AC power adapter.
Start up your MacBook. Test it to see if the trackpad works normally.
If the problem goes away with the battery gone, or if you notice expansion of the battery, replace the battery.
Best of luck.

My playlists don't play in the right order. How can I make it stop shuffling the order of the songs?

I have an ipod nano. I don't know what generation. It's about 1.5 in square with a touch screen. I've had it for several years and never had a problem with it till now. The playlists don't play in order anymore. How do I get control of that back?

Never mind. I found the answer on another site. Thanks anyway.

Running win 7 64 bit and itunes continues to stop working even after uninstalling repeatedly

I have windows 7 64 bit on my PC. Itunes continuously stops responding and closes whenever I open itunes. Whether it is to play music, plug in my iphone or ipod shuffle. I have uninstalled itunes too many times to count and reinstalled it. Every suggestion I have found online I have tried and I AM ABSOLUTELY FED UP. This prob makes my use of iphone for music impossible and a real bummer. PLEASE HELP

-Re: Win 7 64 bit and SB Titanium X-FI Drivers? Sorry - no go - uninstalled the Creative apps and drivers again, uninstalled the MS High Definition Audio Device however it won't let me remove it's driver files (assuming as it's a nati've driver). Every time I uninstall it it wants to restart, every time I restart it's back again immediately. If I uninstall and don't restart, or even if I do, there's NO change to the MS Windows Update results even when forcing a recheck. I'm really stuck.
If I try to li've with the MS HDAD driver with the Li've Titanium in the PC, if I plug anything into the front, to doesn't detect it's there - if I place anything in the back same again. If I remove the headphones it seems ready to accept something? . It's all back to front.
The only time I could get the MS HDAD driver to do anything was with the onboard sound device turned on and the Titanium X-FI removed. Please note that no driver other than the MS HDAD has been loaded on the system for the onboard sound and it is definately turned off at this stage and during testing the X-FI.
I'm going to have a play in Safe Mode, but currently all roads lead to fail.

Trackpad left click stopped working...bluetooth issue?

I have a new macbook pro 15" i7 for about 2 months, and I have a magic mouse and wireless keyboard too. Everything worked fine until yesterday, when I turned on the pc and the left click on the trackpad wouldn't work! Right click works, the cursor moves...only left click doesn't. I saw on a forum that if I turned off the computer and press optioncmd+rp when it starts it would reset PRAM and could work again, and so it did. But the next day the problem remained when I turned on the computer...just for the experience, I tried to turn off bluetooth, where my mouse and keyboard were connected, and the trackpad now fully works! Is this weird? I didn't have to turn off bluetooth for both mouse and trackpad to work... It must be some software problem, because when it first occurred me, I switched to my windows bootcamp partition and it works there!
Sorry for the long text
Cumps

I had this happen to me all of a sudden on my home iMac (2007) and my work 15" MBP (2010). I think it may be related to the multitouch trackpad in some way (probably/possibly the Magic Trackpad which I have paired both with my iMac and MBP). I started seeing multiple messages like this in Console:
20-12-2010 11:29:40 kernel AppleUSBMultitouchDriver::_deviceGetReport - DeviceRequest for reportID 0x0 returned with result 0xe000404f - retrying
I had also seen a forum entry (don't remember where) theorizing that a USB device continually polling the bus might be filling up a buffer in some way and making the left click unresponsive.
For me, it looks like disconnecting the Magic Trackpad and reconnecting fixed everything without having to reboot. We'll see if it stays fixed. If you aren't using a USB keyboard/trackpad, then I'm not sure what to suggest since I don't think you can disconnect the built-in trackpad via software.
Anyway, in the mean time, keep System Preferences > Universal Access > Mouse & Trackpad > Mouse Keys accessible with the 'press the Option key 5 times' to activate option. This allows you to use the 7, 8, 9, u, o, j, k & l keys to move the cursor, and the i key to left-click. At least that way you can shut things down safely if things go haywire.
If anyone else is having these problems, please post so we can get to the bottom of it.
Best of luck!

Filcking right a little bit on trackpad makes webpages stop working.

Similar Messages

Maybe you are looking for