File 2 File motion in PI 7.1

Hi
Working on a file 2 file drop in the PI 7.1 version, I need to pick up a file EPEPMTEXT47220090811.FIC and drop it in the receiver file system with the same name and type,
What are the parameters I need to give on the receiver CC side to get the same name and type
1. File Name schema
Processing Tab
1.Temperory File name schema  
Thanks
PR

Hi PR,
You refer this blog:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
In file name you can give EP* and since you want the same file name enable the file name in ASMA paramters in both sender and receiver communication cahnnel. In receiver comm. channel you can  give for filename as test.xml. Since this is mandatory you need to fill something, but the actual filename would take from ASMA only.
For safety purpose you can give milliseconds to wait in sender comm. cahnnel with a value so that file sender dont pick up whenever your source file is getting written in the source directory.
Regards,
---Satish

Similar Messages

  • Any way to import multi-layered Illustator file into Motion?

    I have an Illustrator map of Europe and i would like to bring it into Motion.
    I know that Motion can import Illustrator files as pdf but is there any way to import a multi-layered illustrator file into Motion. I just saw this web site regarding a Motion plug-in that claims to do just this:
    http://www.macupdate.com/info.php/id/16298/layerlink

    Without a dedicated plug or FxPlug, Motion has no inherent ability to parse Illustrator layers.
    We just bust the layers out and save them as individual files. Or, of course, we use After Effects.
    bogiesan

  • Applying filters to pdf files in Motion causes pixelization-why???

    I have a mult-layered map of Europe made in Illustrator and all layers imported as separate pdf files in Motion 4. But when I apply any filters to the pdf files…they become severely pixelated…they look terrible.
    How come this only happens with pdf files and not with any other format.
    Can pdf files not handle effects of any kind in Motion?

    Assuming you are scaling up your vector layers and you have fixed resolution turned off. Applying a filter rasterizes the layer before it gets transformed, i.e., scaled - that's the reason. The solution is to apply the filter to a group containing the layer so that it is scaled first, then the filter is applied.

  • .vpe files in motion?  CS3 extended

    I have seen an example of using vanishing point on a still image and using the .vpe files in motion projects to overlay animation in perspective to match the still image.My question is how do i import the data from photoshop into motion?
    http://www.youtube.com/watch?v=-GEYOE0h7IA&feature=channel_page

    I dont' see any way to import .vpe into Motion; no way for Motion to understand it. According to the continued thread, I think the creator used the separate AE files, exported form AE, for each surface of the box in Motion.
    *> Hi cabezasca. Motion 3 is an amazing software. It lacks some features comparing with After Effects, but i think is more intuitive and well organized.*
    *I used a Photoshop filter called Vanishing Point and export the vpe file for After Effects. It will export projected images. This file can be applied in a box inside Motion 3.*
    *Good luck!*
    bogiesan

  • Importing Photoshop layered files to Motion

    I'm having issues importing Photoshop layered files to Motion. When the file appears in the viewer, text or the shapes in the Photoshop file have changed colors. It's almost like motion doesn't recognize a gradient color in the text or shape. I've tried rasterizing the layer but it didn't help. Any suggestions?

    hopefully above fixed that! not to hijack, but group layer labels don't seem to imported properly into apple products. is this due to the apple-adobe wars? i am anal so all my photoshop layers are grouped with some organization, but in motion it looks like a mess. thx,
    coocoo

  • Importing MPEG1 files into Motion?!

    Hi,
    it seems that I can't import MPEG1 files into motion even if they play perfectly well in QT player, hence are perfectly supported by Quicktime. Any help on that?
      Mac OS X (10.4.5)  

    They are played from QuickTime, but they are not an editable format. To convert it, try MPEG Streamclip to convert it to DV and use that...
    Patrick

  • Problem exporting file from motion 5

    Hello,
    I am trying to export a file from Motion 5 and whe I play the quicktime back, everything is jumbled and I can't read it. When I am working in Motion and scrubbing along through the file everything looks fine. Can someone please help me out?
    Thanks,
    David

    For starters, what's the version number for Motion and What OS are you on? Are you up to date or using an older version?  Next, what format are you exporting to (ProRes, H.265, etc.)?  Finally does this happen with every project or just this particular one.  Can you post a screen shot of what the problem looks like?  There are a lot of possibilites to consider, the more info you can provide the better luck there will be in someone maybe helping you with a solution.

  • Is there a way to Import After effect files into motion

    I was wondering if there is a way to import after effects files into motion.

    hi
    no there is not. The only thing you can do is to export the layers out of AE as movies and import them into Motion. Of course you are then hard baking everything and you lose control, but that would be the same if you went to any other system.
    adam

  • AI Files in motion.

    Is there a special plugin I can download to use AI files in motion?

    Originally I found it on Adobe Exchange:
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1045 829#
    But unfortunately, the download link expired. A while ago it was availabe from a obscure russian website, but that link died too. I've tried to google it, but no luck.
    I would love to share this file to everyone, but since I'm not the author of the script i don't know if I can do that. I'm sure it would help a lot of Motion users...
    Michal

  • Vector file makes Motion crash

    Hi there everyone. I have a question regarding vector files in motion. I have very small pdf file that I saved in Illustrator. I import it in to Motion 3 and turn off fixed resolution so I can see the sharp vector as it should be. Everything is fine until I go in to 3d mode and start to move the camera around. That's when I get the message "This media is too large to render at full resolution, and will be shown at a lower quality.The maximum size is 4096x4096". After that motion either crashes or everything slows down. Anybody know what is going on? If the pdf file is only 500k why should this cause any problems?

    lol...alot of people had this problem before,
    http://discussions.apple.com/thread.jspa?threadID=1130609&start=0&tstart=0
    or use the path to shape script found here. BTY, thats quiet large for your vector file.

  • Error message: "Can't open file "[File path, file name].key"

    If I attempt to open any Keynote files, I now get this error message.
    "Can't open file "[File path: file name].key"
    To clarify, the text in the square brackets above would be the file path and then the file name.
    The file then will appear on the screen, but is unresponsive to any clicks or menu commands.
    The files will open successfully on other Macs, so they aren't corrupt.
    Also - I've just checked, and opening Keynote and trying to create a new presentation leads to the same problem: All screen menus / buttons are dead - all I can do is drag the window around the screen.
    I've tried to reinstall Keynote, but this hasn't resolved the problem.
    Is there some corrupt preference file (or similar) that I need to get rid of? Is there an easy way to do a complete uninstall of Keynote so I can try another install? Or is this a symptom of something else?
    All ideas gratefully appreciated!
    Message was edited by: Brendan Donlon

    All the issues I describe in my questions around this time re: Keynote were actually symptoms of a soon-to-die laptop. The Hard Disc was corrupting, and Keynote was the first application to be affected.

  • After completing my upgrade to Adobe Reader 11.0.10 When I attpemt to use "Tools/File/File Save As" from IE 11 I get a "Adobe Reader is not Responding" and my browser is locked up.

    After completing my upgrade to Adobe Reader 11.0.10. when I attempt to save an online PDF to my local drive I receive a blank window where I would expect to see file directory structure to save to.
    No local directories are displayed for "Saving To", it is all blank.   When I try to Close (by clicking X)  the "File Save As" box a message pops up on top that says "Adobe Reader is not Responding"  It locks up all of my IE windows, not just the one with the PDF doc.
    I then need to go Task Manager and stop the IE task.  All my browser windows are then closed.
    That is the only way to recover from the "Adobe Reader is Not Responding" message.
    This was not happening in previous versions of Reader.
    Tolls/File/File Save As always worked properly.
    I have installed IE 11 (11.0.9600.17690)

    Please don't post the same question multiple times!

  • "File file path:to:file is already open" how do i close it?

    I am trying to write a script that pops up a dialog box, asks for text and saves this to a .csv and a .txt This is so i can quickly record what i am doing and the times i am doing it, makes quick notes and various things like that. However it is failing with the message "File file path:to:file is already open" so how do i close the file or get around this. Cheers
    Script Below
    tell me to activate
    display dialog "Enter the log message:" default answer "" buttons {"Cancel", "Ok"} default button "Ok"
    copy the result as list to {the log_message, the button_pressed}
    if the button_pressed is not "Cancel" then
    set curTime to (do shell script "date \"+%H:%M:%S\"")
    set curDate to (do shell script "date \"+%Y%m%d\"")
    set new_foldername to curDate
    set this_folder to (path to current user folder) as text
    set fPath2 to this_folder & "Documents:Logs:Date:" as alias
    --set this_folder to "Macintosh HD:Users:username:" as alias
    tell application "Finder"
    if not (exists folder new_foldername of fPath2) then
    make new folder at fPath2 with properties {name:new_foldername}
    end if
    end tell
    set fPath to (path to current user folder as Unicode text) & "Documents:Logs:Date:" & curDate & ":"
    set fName to curDate & ".csv"
    set myFile to open for access file ((fPath as string) & fName) with write permission
    write curTime & "," & log_message & return to myFile starting at eof
    close access myFile
    set fName2 to curDate & ".txt"
    set myFile to open for access file ((fPath as string) & fName2) with write permission
    write curTime & " " & log_message & return to myFile starting at eof
    close access myFile
    end if

    Hi Richard,
    Run this in the script editor:
    set f to choose file
    close access f
    Navigate to the file you left open. Probably there was an error and the file was left open because it never reached the 'close access' command.
    gl,

  • __ Is there a way to open an .emf (Windows Enhanced Meta File) file in Ai?

    __ Is there a way to open an .emf (Windows Enhanced Meta File) file in Ai?
    I was given several Nutrition Facts tables to use in my package design - I don't want to redraw them or guess at the size.
    Thanks

    Thanks for your help Kurt, but the main problem is that I don't see an Upload button (I read about it in the Help file as well) - I see "+You/Mail/Caledar/Documents/Photos?Sites/Search/More" and
    "Docs/Create/Home/Starred/Owned by me/All items/Bin" etc. but no 'Upload' !
    - OH WAIT A MINUTE - I JUST MOUSED OVER IT - THERE IT IS! I FEEL REALLY DUMB NOW! 
    Here's the link:  https://docs.google.com/open?id=0B9cv3o9-NLCfZTNiM2JlNWUtYjQxOS00NWUxLWJjYjAtYmM1NjhiMjA1Z mMw

  • Can't get File/File info to work on image in Pshop CS5 or Bridge CS5

    After I've pulled up an image and I go to file/file info, I get a big white box on the screen with the file name of my image across the top of it, and nothing inside. Just a big white box. It's the kind of box that an image would normally go into, not the kind of box that used to show me all the file info. At that point my system is somewhat frozen. I can click on the top choices, eg. Photoshop, file, edit, image, etc., but the choices are all greyed out, forcing me to force quit. What's going on?
    I'm running an iMac with Snow Leopard, have 4 gb ram. I'm fully updated to Version 12.0.4, and when I click on 'about' under Photoshop to see what version I have, I see  Version 12.0.4 x32.

    Meri,
    This isn't a solution but a possible workaround.
    When you view your photo in Bridge instead of using File Info, why not view the information in the Metadata panel.
    First I would go to the Bridge preferences, Metadata, and make sure that File Properties, Camera Data EXIF and Camera Raw categories are checked so the info will show up in the Metadata panel. You can check additional categories to show more metadata. (Camera Raw metadata will obviously only appear if the file has actually been opened in Camera Raw)
    You should find the information you need in the Metadata panel.
    As a aside, are these raw CR2 files from your Canon? Do you have the same issue with .jpegs or .tiffs, etc?
    Does the issue still appear if you run Photoshop in 64 bit. I know SnakEyez02 say it didn't make a difference for him. Maybe it will for you.
    To run Photoshop in 64 bit, quit Photoshop, in the FINDER select the Photoshop CS5 icon (the application NOT the folder)  Command I and deselect the Open in 32 bit option in the File info window. Restart Photoshop.
    Good Luck!

  • PI 7.1 scenario -- File to File , File to IDOC  and IDoc to File Scenario

    Hi All,
    *I have PI 7.0 . I have in that File to File , File to IDOC  and IDoc to File Scenarios*
    File to File -- This scenario is working fine.
    File to IDOC   --  Setting done in PI 7.0 like SM59,  IDXI, IDX2  and in R/3 like SALE (logical system)---  This scenario is working fine.
    IDoc to File  --  Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
    Now I need to move to PI 7.1  -- for File to File , File to IDOC  and IDoc to File Scenarios.
    Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
    If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
    Regards

    >
    Rickkk wrote:
    > Hi,
    >
    > Idoc metadeta is updated through idx2?
    >
    > Regards
    If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
    You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

Maybe you are looking for