File 2 RFC

Hi,
I wrote RFC Func. Module in R/3,
with just a Remote Enabled func module and code i gave is
Using SE37 Func Module Name: <b>ZDumpData</b>
ZTakeData is the Table name in R/3.
In Tables Tab:
ITAB LIKE ZTakeData
In Source Tab:
insert ZTakeData from table itab.
and activated the Func Module..
i tried to get this RFC into XI, but i am unable to see it.
Then i tried with RFC Release in R/3... still unable to find RFC in XI.. what is that missing? anything more to do?
thanks
Seshu

Hi vara,
Please mail me too
[email protected]
Thanks,
ram

Similar Messages

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean     Local Enterprise Bean     1
CallSapAdapter     Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean Local Enterprise Bean     3
Module configuration:
1     PassThrough     true
3     receiverChannel     <FilereceiverCCname>
3     receiverService     <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

File-to-File/RFC scenario with reading filename

Hi,
i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
Scenario:
- A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
- The file must now go through a business process (not necessary the file, but i need the filename in the business process).
- The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
- The collected data are send via SOAP to a receiver system
- The file itself has to be stored in a directory via File-Adapter.
Here's my problem:
- Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
- Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
- How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
- Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
Thanks in advance,
ms

If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
VJ

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

Request Message mapping in SXMB_MONI for File - RFC - File without BPM

Hi ,
In my File-RFC-File scenario, the messages are processed successfully.
but when i look into the SXMB_MONI for File to RFC step, the records are present only till the Message split According to Receiver List and not able to see the records from Request Message mapping step onwards.it contains
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Z_PI_LOTUSNOTES_UNIFORM xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
in my mapping for the receiver RFC i have not done the mapping for all the fields. few fields i have disabled. whether this could create a problem in message mapping. pls let me know what needs to be done.

Is it only for this scenario that the above display issue is occuring or is it for all scenarios?
If onlt a particular Pipeline steps are displayed then you can check what is the TRACE level set in SXMB_ADM --> Integration Engine Configuration --> and check if the TRACE parameter is set to at least 2 (max is 3 which will ensure that your DB will get full quickly)
For more information refer: /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Regards,
Abhishek.

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Error messages while executing File - RFC - File.

Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.

Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish

Problem with File-RFC..

Hello friends,
I am doing File - RFC scenario.
When I send data from XI, its going fine but the records are not created in RFC
when I try to create records with test data in SE37, its able to create records
Where could the things be wrong?
why were the records not created?
file is picked, receiver side CC is green, checkered flag
no inbound or outbound queues in XI
if the data is being accepted by the RFC, then it would have created records in RFC, i guess there is some problem in accepting the data sent by Xi and processing it as records of RFC
coz with test data, the RFC is working gud
There are no items in the Queue on the R3 side.
please help on how to check where do I have to check if the data is coming in or not or how to trace it?
stuck with it since last 4 days
help !!!!

hi nikhil,
you should try to put an infinite loop on your RFC function, something like:
data a.
while a eq space. endwhile.
Then from SM50 you should be able to see if the FM has been called; if so, you should see the 'blocked' process and be able to debug it.
If not, then XI is not calling properly the FM; you should check your receiver agreement and, eventually, if there something wrong with the alignment in CPA cache(both from the Integration Directory and SXI_CACHE transaction)
Regards,
Paolo

File-RFC-File-File not getting deleted.

Hi all,
In File-RFC-File scenario i have used "Delete" as the processing mode for Sender file adapter.RFC was execured successfully and successful message was shown in SXMB_MONI.But at the same time there was an exception thrown in sender and receiver file adapters as given below:
Error when getting an FTP connection from connection pool. com.sap.aii.af.service.util.concurrent.ResourcePoolException:unable to create new pooled resource : FTP Ex:User piuser cannot login.
Both the CC's werein error status.
The file from source location was not deleted even after the successful processing of the message in moni. Because of this sender file adapter was reading the same source file again and again which created multiple response entries in the moni.
Could some one tell me why the file was not deleted from source location?How can the sender adapter read the message again when the above exception was thrown?
Regards,
Lekshmi.

HI Lekshmi ,
Check whether PIUSER has sufficent authorization ., Delete that channel and create a dummy one to test and see whether
you are getting the same error
Check this threads a similar discussion is going on here , may be you need authorizations .
Re: com.sap.sql.DuplicateKeyException in file sender adapter
Re: Processing mode - DELETE not working in Synchronous mode (File - RFC - File
Regards
Ninad

Error in File-RFC-File Without BPM

Hi,
We are following this wiki
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)]
and we are getting Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error in sender communication channel monitoring. File is not picking. I think problem with the parameters that we have mentioned in module tab in sender communication channel as specified in the wiki. If we remove additional 2 parameters it is picking the file.
Please help me to resolve this issue.
Thanks.
Jyothi Anagani.

are you able to see the logs of file adapter?
go to messaging system and check the details
http://host:port/MessagingSystem/monitor/monitor.jsp
Rajesh

Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario

Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
Amit

Sometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek

Processing mode - DELETE not working in Synchronous mode (File - RFC - File

Hi ,
I need to the delete the files from source folder once the processing is done, so i am giving the Processing mode as Delete in the Sender C.C.
But after execution it doesnt get deleted. what could be the reason?
We are using a file - RFc - file scenario.
also could anyone let me know what is the command to move a file from one folder to another in UNIX.
i tried
mv /home/out but it doesnt work
pls help.

Hi,
you can use AL11: navigate to the folder, where the file is inside, mark it and press button "Attributes". Then look to value "Mode": 777 means owner, group and everybody else has right for write (in your case delete), read and execute. UNIX command to change is may be ch mod (i m not good in UNIX).
My suspect is that the file adapter user has not the right for write, but ur direct user has.
Regards,
Udo

For File -- RFC-- File scenario want to remove sync/async bridge

For File -- RFC-- File scenario want to remove sync/async bridge
Can I work with File -- RFC-- File scenario without BPM
Regards

Hi-
Check this threads
RFC -> File without BPM
File - RFC - File without a BPM - Possible from SP 19.
File-To-RFC without using BPM

File-RFC-File Sync-- BPM error..

Hi All,
My scenario is File -- RFC -- File, synchronous scenario, The scenario needs to be designed using BPM its clients requirement, and i have used Receive step, BLOCK and in the block Transform, Sync Send, Transform and with in the block i have used control step with cancel process.. and out of block send step .. when i execute the scenario, in sxmb_moni i can able to see the response message and when i see in SXMB_MONI_BPE the flow was blocked in the BLOCK1 Step and i am not getting the response file in my target ftp directory.. so request you to post any links how to debug this issue..
regards,
sai

BLOCK and in the block Transform, Sync Send, Transform and with in the block i have used control step with cancel
process.
when i execute the scenario, in sxmb_moni i can able to see the response message and when i see in SXMB_MONI_BPE the flow
was blocked in the BLOCK1 Step and i am not getting the response file in my target ftp directory.
The BPM is working perfectly as designed....you have a maintained a Cancel Process step....how in such a case will the BPM proceed? The BPM is bound to stop in side the block itself the BLOCK1.
What is the reason of having a Block over Transform --> SYNC Send --> Transform?
Your BPM should be:
Receive --> Transform --> Sync_Send --> transform --> Send.
If you want to have a block then have it for the individual steps with an Exception Branch and then in this Exception Branch have a Conntrol Step cancelling the process.
Regards,
Abhishek.

File RFC sync scenario error: MsgId alredy exists in the system

Hi,
I am working on File RFC sysnc scenario.
The first message that I tried to processed gave a error
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date ' ' has a wrong format at field REQ_DATE_H: Unparseable date: " "
When I retried correcting the data, it started giving strange error
Message ID 62D07CA0D3EE11DCCD36DA01C52F0606 for pipeline CENTRAL, version already exists in system.
How to rectify this?
XI version is PI 7.0 SP10

Nisar,
Which program to re-run? Are you talking about activating the channel again? If so, then I have done it many times changing the file name.
I got below error in Communication Channel Monitoring:
2008-02-06 02:27:39 Error Received XI System Error. ErrorCode: MSGGUID_EXISTING ErrorText: ErrorStack: Message ID 83F8B0B0D48311DCA544DA01C52F0606 for pipeline CENTRAL, version already exists in system
2008-02-06 02:27:39 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error Transmitting the message using connection http://xibox:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error The message status set to FAIL.
2008-02-06 02:27:39 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=<b>delta|full</b>
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

File 2 RFC

Similar Messages

Maybe you are looking for