File adapter error, because the filename contains "u00D1"

Hi,
I'm working in a spanish project, I've an interface FTP --> PI --> IDOC, my problem is because in spanish the letter "Ñ" is used and when there are one file in the folder with this letter the communication channel fails because the communication channel cann't read the file.
Any idea how to configure the communication channel to avoid this problem?
Thanks, in advance.
Jose Manuel

@ Nabendu
Nabendu Sen wrote:
Create a Custom Adapter EJB which can remove this type of unwanted characters. You need to call this in the sequence before Call Adapter so that before XML parsing, this types of characters are removed.
"Ñ" is a valid letter in Spanish and I don't think removing it is a good option.
@ Jose
Check what encoding is being used?

Similar Messages

  • Error Message - "could not complete your request because the preset contains invalid data"

    I am trying to open a file, and every time I do it comes up with the following error message:
    "Could not complete your request because the preset contains invalid data"
    I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
    I have tried:
    - restarting my mac
    - opening different files created at different times
    - deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
    I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
    Any help? Thanks so much in advance!
    Pat Dryburgh

    The one thing you didn't do is reset your Photoshop preferences.
    Most likely the preferences got corrupted, and reference a corrupt preset.

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • Can't copy file to network drive as "The operation can't be completed because the [Filename] is in use

    Following upgrade to Yosemite I now can't copy files from iMac to my network HDD in external media center. I have iMac connected by wi-fi to airport extreme and media center connected to airport extreme by cable. I can see the HDD as a network drive on my iMac and can initiate the copy but right when copy process is finished I see "The operation can’t be completed because the [Filename] is in use". I am trying to copy different media files downloaded from internet which are not used by any program and stored on my hard drive. I actually can copy small files of 1mb and it works but anything above 20mb is halted. I can also move/copy/delete the file on iMac. Cant understand the nature of the problem. I tried to format external HDD as EXT2/EXT3/NTFS but same outcome.
    OS X Yosemite 10.10.3 | iMac late 2009 | Apple Airport Extreme | Dune HD Base 3D mediacenter

    Have you tried a restart or logging out/in?
    Some more ideas.
    Re: The operation can’t be completed because the item “ " is in use.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

  • How do I view downloaded content when the error message, not a supported file type or because the file has been damaged, shows up?

    I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What do I do and how do I get it to work. Because as of now I only have one option of downloading the book and I've tried to download the app notable pdf to see it that worked but it didn't either. As of right now I'm using google chrome but I also tried using Safari but it's still not working. I have a Mac with a Mac OS X updated system. I need an answer ASAP. Can anyone help me?

    I have the same issue.  Almost none of the PDFs I download from Safari browser can be opened. Same message about the file being damaged or not really a true PDF.  Neither of these are the issue here. Size of file is not an issue. I have Acrobat Reader XI so I believe that's pretty up to date.  If I open with Text Editor the file is blank.  any ideas?

  • After saved to computer, Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    After saved to computer, Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    What is your operating system?  Reader version?
    Saved from where?  What is the file size of the saved document?

  • Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).".  Is fix the same as on previous OS versions?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

    I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
    I get the same message when using Numbers so I presume it is a OS problem

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data before proceeding.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.

  • Error message: file was skipped because the old remote file could not be deleted.. Later it will up

    Error message: file was skipped because the old remote file could not be deleted.. Later it will upload after i try a few more times. Not at my size quota for website (I have lots of room) , have toggled Passive FTP ...keeps happening. Is there a way to fix this? Thanks! I am using DW CS5 on Windows 7 platform. This does not happen when I upload otherwise on my computer - only when using DW.
    It also only happens with the html files - it does not happen with my jpeg files

    Do you have notes in your site?  DW's local and remote site synching might be off.   Try clearing your cache.
    http://forums.adobe.com/thread/494811
    Nancy O.

  • I keep getting an error on my MAC when i try to open any and all JPG FILES.  How do I correct  Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

    Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    that is the message how do i correct this problem

    It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
    If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

  • File Adapter - special character in Filename

    Hi,
    i have a question concerning file adapter.
    Scenario: we are polling files via file sender adapter (FTP).
    Problem: if the filename contains a special character, an error is thrown with 'The System cannot find the file specified'
    Scope: Special character in filename (not in payload)
    Installed: XI 3.0 SP 19 on Linux
    Questions:
    - what FTP implementation does XI use?
    - What do i have to check/upgrade to unicode?
    - is it an OS problem or an Java problem or a XI problem?
    - or is it not possible copiing files with special characters in filename?
    Thank you very much in advance.
    Michael

    Hi Michael,
    The file/FTP adapter supports both passive and active FTP data connection. You can select the data connection while configuring the adapter.
    The file/FTP adapter follows specification RFC 959. The specification can be found on the Internet under  www.ietf.org/rfc/rfc0959.txt.
    For FAQs about the file/FTP adapter, see SAP Note 821267. Please note that you'll need an account to log in on service.sap.com.
    Question: How are you specifiying the file name? i.e. Are you using placeholders, like ?, *, *.txt, etc ?
    If there's a problem with the filenames, then it should be a problem in the JAVA implementation of the adapter I assume. So you could for instance build your own adapter extension to by-pass that problem.
    Just for your information; I haven't encounter a problem with filenames in other projects.
    Good luck!

  • Packaging error 2 (The media contains invalid NALU length)

    Hi,
    I am trying to publish live stream from Adobe Flash client that can be viewed on iOS device.  One known issue is that the Flash client does not support AAC audio encoder when it publishes a stream, but AAC is required for iOS viewing.  Thus I am using ffmpeg to transcode the audio to work around this issue.  The setup looks like following:
                                     Publish(h.264+Speex)      Pull               Re-Publish(h.264+AAC)
    Flash Client Publisher -------------------> AMS -----> ffmpeg ---------------------> AMS
    The command line I use for ffmpeg is like this:
    ffmpeg -re -i rtmp://xxx.xxx.xxx.xxx/livepkgr/orgstream -c:v copy -c:a aac -strict -2 -f flv rtmp://xxx.xxx.xxx.xxx/livepkgr/livestream
    This setup works perfectly if the original stream is published by Flash Media Live Encoder client.  However, if the stream is published by a web page using Flash ActionScript client, the iOS won't play the stream.  The root cause is that HLS module failed to generate the proper TS file. I get the following error in the Apache server log.
    [Sat Aug 17 15:56:50 2013] [error] mod_hlshttp [500]: Packaging error 2 (The media contains invalid NALU length) when processing /hls-live/streams/livepkgr/events/_definst_/livestream/livestreamNum0.ts
    I've tried various things to narrow down the possibilities regarding what could be wrong.  Here are some of my observations:
    1) The problem has nothing to do with audio.  If I do audio streaming only, it works well.  So in various experiement, I simplified the problem by doing video stream only.  When using ffmpeg to transcoding, I used '-an' to disable audio stream.
    2) If I use ffmpeg to save the stream into MP4 file first (say 1 minute long), and then publish that file, I got the same issue when iOS device is trying to retrieve content.  The MP4 file generated is fine though.  I can view it using VLC.
    3) If I use ffmpeg to transcode H.264 to H.264 (i.e. Not to use the "copy" transcoder), it then will work.  However, because of the CPU usage constraints in my requirement, I cannot adopt this approach. Here is the command line that works:
    ffmpeg -re -i rtmp://xxx.xxx.xxx.xxx/livepkgr/orgstream  -vcodec libx264 -b:v 1000k -c:a aac -strict -2 -f flv rtmp://xxx.xxx.xxx.xxx/livepkgr/livestream
    4) In all those experiments, the m3u8 file are generated correctly.  In the stream directory I always saw meaningful size for f4f and f4x files.
    5) The iOS client is able to view the original stream fine if the original stream is H.264 video only stream. (The 'orgstream', not the one republished by ffmpeg).
    6) In all those experiements, a regular Flash viewer client is able to play the live stream with no issue.
    Since I don't have access to source code to the Apache module for HLS (mod_hlshttp), I don't know how to proceed further. I appreciate any help from Adobe engineering team who have access to source code, and give me some hint what could go wrong.  I can also provide further information regarding the published stream, e.g. the generated MP4 if it can help.
    Thanks and best regards,
    Jason
    Message was edited by: Json

    The one thing you didn't do is reset your Photoshop preferences.
    Most likely the preferences got corrupted, and reference a corrupt preset.

  • Mac won't open some files MasterPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.

    The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
    Please update this thread if your issue is resolved.
    Thanks,
    Shashi

Maybe you are looking for