File Adapter Getting Stopped

Hi All,
File Adapter (Sender,FTP) polling is geting stopped automatically.
This happens after 10-12hrs.
Can anyone help.
Thanks in Advance.
Chemmanz

Hi,
Is there any possibility that FTP adapter will automatically stop polling, if no file is available in the FTP site for a very long time ?
In my case the polling interval is 10sec.
Regards,
Chemmanz

Similar Messages

File Adapter gets error while deleting the file

Hi,
We are running on PI 7.0 SP6. I built a simple integration scenario where a file is picked up from a certain directory on the server (PI server itself) and get processed according to some mapping rules and again put to an other directory. I used the file adapter for picking and putting the file with 2 different communication channels.
My integration works fine. File is picked up processed and put into its new location.
But the file adapter cannot work in archiving or deletion mode. So the file (to be picked up by PI) remains in its original location.
I am getting the following error:
Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap.aii.adapter.file.File2XI.deleteFile(FileHandle)#J2EE_GUEST#0####18a971f3338011dbcde800145e69a8d4#XI AF File2XI[:EBI:File_from_EBI_to_EXS]##0#0#Error#1#com.sap.aii.adapter.file.File2XI#Java###Deleting of file failed - cannot proceed#1#E:
SCENARIOS
EBITOEXS
RFID
GELEN
tagdata22082006035719.xml#
#1.5#00145E69A8D4005B0000004700000A6400041BC49A1D56D3#1156431120046#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap.aii.adapter.file.File2XI.processFileList()#J2EE_GUEST#0####18a971f3338011dbcde800145e69a8d4#XI AF File2XI[:EBI:File_from_EBI_to_EXS]##0#0#Error#1#com.sap.aii.adapter.file.File2XI#Plain###File 'E:
SCENARIOS
EBITOEXS
RFID
GELEN
tagdata22082006035719.xml' - deleting after processing failed - retry#
I tried everything but upgrading to a higher SP level and will do so unless anyone has an other suggestion.
Thanks a lot,
Murat Gölcü
[email protected]

Hi,
These are a few things you can do:
Check the permissions of the folder where the file is being Placed. (it will mostly have only read permission, this is what i could understand from your explanation)
If you are doing Content conversion, please can you just remove it and see if the XML file is getting generated.
Also, please check if it's picked up by any other application when you place it on the server.
Regards,
Abhy

File adapter polling stops after reboot of third party system

Hi,
We noticed that whenever we reboot our third party system, XI File Adapter is losing it's connection to that third party system and polling stops. As a result File Adapter is not processing any files from that particular server.
To fix this problem, we either reboot XI Server or refresh communication channel (Go to change mode and save it).
File adapter is configured to use FTP to transfer the files between Windows Server and Unix Server.
Is there a better way to fix this problem?
Thanks in advance.
Regards
Chandu

Hi,
Make the connect mode as PER FILE TRANSFER in the file adapter.
Connect Mode
Permanently
An existing connection to the FTP server is used permanently.
The connection is reestablished automatically if it is closed by the server.
Per File Transfer
A new connection to the FTP server is established for each file transfer.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Bhavesh

CONFIGURE FILE ADAPTER ,get files one by one.

HI, I have cinfigure one system of FILE ADAPTER TO JDBC ADAPTER, is working OK, but I need to Know how configure The FIle adapter to get files one by one from the folder , I have the channel configure between 30 seconds, but when come to look for the files has them all ... I need to get one by one the files.
Help me... RGRDS.

Hi ,
What is the operating system of your PI server sytem? If its unix/linux you can achieve this using shell scripts, for windows systems you need batch files. The script/batch file would run in background continuously. It will check how many files are present in a directory (say xyz) . Then one by one transfer the files to directory(say abc) from where PI picks up files at regular interval. you need to use "sleep()" command in script so that the script puts files after some time interval say 90 seconds. The polling interval of comm channel in PI should be set less than sleep time interval of the script.In file sender adpater configuration please set the Processing Parameters -> Processing Mode-> Delete/archive. The script before putting a file in "abc " checks presence of any files. If there are some files it goes to sleep mode for few seconds and continues checking unless "abc" is empty. Then the script moves(as we do cut and paste in windows) file in "abc" directory.
regards
Anupam

When I am downloading anything from any website in firefox and if I close main window of firefox, the downloading file also gets stops and crashes.

example, I was downloading 74 mb file and as soon as I close firefox window my 74 mb file was downloaded to that size upto which it has been downloaded say 1 Mb for example..

You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page. 
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

XI file adapter stopped working after PI 7.0 upgrade (SP14)

We have just completed a PI 7.0 upgrade and the file adapter has stopped picking up files from the inbound directory. The j2ee/cluster/server0/log/applications.log file shows
#1.5^H#0013217C0311008600001F91000011D100047C99629BA213#1262898132157#/Applicati
ons/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap
.aii.adapter.file.File2XI.processFileList()#J2EE_GUEST#0##n/a##35790820fbcf11dec
b310013217c0311#XI File2XI[from_ICCnet_TEST_CHANNEL/ICC_Inbound/ICCnet]_106031##
0#0#Error#1#com.sap.aii.adapter.file.File2XI#Plain###Channel from_ICCnet_TEST_CH
ANNEL: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTrans
actionRolledbackLocalException: Exception thrown in method process. The transact
ion is marked for rollback. - continue processing#
followed by the following:
#1.5^H#0013217C03110061000020F9000011D100047C9962B8AA7E#1262898134060#/Applicati
ons/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap
.aii.adapter.file.util.AuditLog.addAuditLog(PublicMessageKey, String, AuditLogSt
atus, String, String, Object[])#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [
0681afffffffa01ffffffbd30]#n/a##37c987d2fbcf11de89c70013217c0311#XI File2XI[from
ICCnetTEST_CHANNEL/ICC_Inbound/ICCnet]_106033##0#0#Error#1#com.sap.aii.adapter
.file.util.AuditLog#Plain###FILE_ERR_211#
I think I have read every note but can not seem to find a solution -- any help would be appreciated.
Thansk,
Tom

Here is the defaulttracefile.
#1.5^H#0013217C0311007200006379000011D100047CA71C3769BC#1262957080118#com.sap.ai
i.adapter.file.File2XI##com.sap.aii.adapter.file.File2XI.processFileList()#J2EE_
GUEST#0##n/a##df3c5bd2fc5811de92ae0013217c0311#XI File2XI[from_ICCnet_TEST_CHANN
EL/ICC_Inbound/ICCnet]_192064##0#0#Error#1#/Applications/ExchangeInfrastructure/
AdapterFramework/Services/ADAPTER/ADMIN/File#Plain###Channel from_ICCnet_TEST_CH
ANNEL: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTrans
actionRolledbackLocalException: Exception thrown in method process. The transact
ion is marked for rollback. - continue processing#
#1.5^H#0013217C0311007400005FCA000011D100047CA71C58E8CF#1262957082311#com.sap.en
gine.services.ejb#seeburger.com/com.seeburger.bicxiadapter.module.classifier#com
.sap.engine.services.ejb#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [0681aff
fffffa02ffffffe9ffffffa6]#n/a##d2200912fc5811deca270013217c0311#XI File2XI[from_
ICCnet_TEST_CHANN

File adapter (sender) module throws exception, but adapter proceeds again

Hello dear reader,
I wrote a module that converts a flat file into XI-XML and tested it within the file adapter. It works fine so far. But if I force the module to throw an exception to handle an erroneous flat file, the file adapter tries to proceed the erroneous file again and again. Not very nice, isn´t it?
Has anybody an idea, how to configure the file adapter to stop the processing of an erroneous file?
Thank you in advance
Yours
Frank Waskow

Hello Satish,
the weblog doesn´t describe my problem correctly. Let me show you the Audit Log from the Messeage Display Tool of the Adapter Engine:
Audit Log for Message: 06ff54a0-a258-11db-b9e2-003048226013
Time Stamp Status Description
2007-01-12 16:14:49 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:14:50 Error Attempt to process file failed with null
2007-01-12 16:15:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:15:00 Error Attempt to process file failed with null
2007-01-12 16:16:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:16:00 Error Attempt to process file failed with null
2007-01-12 16:17:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:17:00 Error Attempt to process file failed with null
2007-01-12 16:18:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:18:00 Error Attempt to process file failed with null
It seems to me that the Adapter gets the error of the module, but it is not handled as an error like shown in the blog <a href="/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically:///people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically.
The adapter tries to proceed the same file again and again, till I delete it from the source directory.
Any more idea?
Frank

File adapter - Unexpected exception running file2xmbprocessor

Hallo,
I've a fileadapter running and a couple of time the adapter is running fine.
After a while I get the following exception:
Unexpected exception running file2xmbprocessor
java.util.NoSuchElementException
at java.util.TreeMap$EntryIterator.nextEntry(TreeMap.java:1024)
at java.util.TreeMap$KeyIterator.next(TreeMap.java:1051)
at com.sap.aii.messaging.adapter.File2XMBProcessor.processFileAccess(ModuleFile2XMB.java:1383)
at com.sap.aii.messaging.adapter.File2XMBProcessor.run(ModuleFile2XMB.java:872)
at java.lang.Thread.run(Thread.java:534)
File adapter processing stopped
I have no idea whats wrong.
Any idea
Thanks harald

Hi Prasad,
sorry - but I can't understand what you mean.
The file-adapter I'm talking about runs on a fileserver. This adapter read the files and send them to the XI-System where a java-mapping is running.
Therefore I can't believe that the problem is the mapping.
The way I see it is that the error must be in a part of the file-read-process because the exception says
[fileprocessor] Error: Unexpected exception running file2xmbprocessor
java.util.NoSuchElementException
at java.util.TreeMap$EntryIterator.nextEntry 
Could you please explain what you mean.
Thanks and best regards
Harald

File Adapter: 2 output files

Hello,
we have to implement the following scenario:
1. File Adapter gets 1 input file ('FileXXX').
2. A File Adapter Module creates 2 different outputs from the input file
3. The outputs must be saved in separate files with the names 'FileXXX' and 'FileXXX.par'. The order of file creating is important, e.g. FileXXX must be created first in every case.
How to achieve this? I read the documentation for Content Conversion, but it seems not to be the right way.
Thanks and regards, Marina

Please see the below links for Message split ..
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
u have to use FCC and ignore 2 extra header and do your FCC as you do in normal scanario..

File Adapter going into infinite mode while polling for the file

Hi,
I am facing an issue while the file adapter is reading the data from the file.
If the file from which it is reading has been deleted it keeps on polling for it infinite number of times and also doesn't pops out with any error message. Is there any method that after polling for some time period we can pop out a message that the particular file is not available and then the file adapter should stop polling for the file.Anyone has some ideas about this. Any pointers will be of great help.
Thanks
Vinay
Message was edited by:
soachd

Hi soachd,
As far as I understand polling is infinite process. You need to adopt this strategy if you are expecting some thing to happen all the time or may be when you want to be ready when ever an expected event happens. This provides a real time solution but with the downside of infinite execution.
Hope it helps.
Kalyan.

Empty Message Handling with Receiver File adapter

Hi,
We were using the "Empty-Message-Handling" (status set to Ignore) of Receiver file adapter to stop a 0 KB file from being written to the specified directory.
However, inspite of this, a 0KB file continues to be written.
The specifications are given below-
File Construction Mode - Add Time Stamp
Put File - Directly
Empty Message Handling - Ignore
Maximum Concurrency - 1
File Type - Binary
Can anyone please help with this.
Thanks and Regards,
Shiladitya

HI,
In one of thread the same problem was coming. Just look at the thread.
Receiver file adapter creates empty files, Empty-Message Handling SP19
Or
Follow the weblog for the same requirement.
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
Thnx
Chirag
Reward points if it helps.

Time stamp is not getting updated for File Adapter in communication channel

Hi All,
Since yesterday, I am observing that the time stamp of communication channel for File adapter is not gettingupdated some times.
I had to stop and start the communication channel to update the time stamp.Please let me know if anyone has come across such issue or any useful notes on this.I could not find any related notes on Market place.
Regards,
Dinakar

Hi,
This is happening only with one communication channel which is sender in derection.Any reason why it is happening like this?since the restart of the communication channel it is getting update now.I really do not know how to delete/create the communication channels as this was done our PI consultants.Pls guide me.
Regards,
Dinakar

File adapter causes FTP process stop result 0 byte file.

Has anyone ever heard that FTP adapter can cause FTP process to stop and end up with 0 byte file transferred?
We use the normal ftp script to ftp file from external file server place file in XI inbound folder so that file adapter can pick them up from that folder.
We have encounter a few 0 byte FTPed file in our system. One suspecting is the network between XI server and file server might get some interruption. With out just blaming on the network. We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??
We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??
Best rgds,
Thida

Hi,
>We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??
have not seen the file adapter causing any such problems. So, it looks like a network issue.
>We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??
Am not exactly sure, but when a file is being created and the file adapter tries to read such a file, the file would be READ and WRITE Locked and so File adapter should not be able to read such a file until the creation of the file is complete.
Also, take a look at the note : 821267 , question 31 for how file adapter processes empty file.
Regards,
Bhavesh

Extra Blank Line gets added at the Beginning of the file by File Adapter...

Hello All,
I have created an RFC to File Adapter scenario in PI 7,1 and I am using Content Conversion in the File Adapter to convert the payload structure to flat text file. The input Structure is simple as follows:
<File>
<FName>some file name</Fname>
<Record>
<Data>
 <Line>Text Lines</Line>
</Date>
</Record>
</File>
while using the following Content Conversion Parameters: While I have defined "Record" as Structure.
Record.addHeaderLine = 0
Record.fieldSeparator = 'nl'
Record.endSeparator = 'nl'
Here everything is working fine except that the text file getting generated has a blank line at the beginning. I was thinking that by adding "Record.addHeaderLine = 0" parameter, no header line will be added to the file but this seems to be not working. I tried to include the top element "File" with the same parameters and different combinations but was not able to achieve the result and it stopped the file creation altogether.
So, I'll appreciate if anyone can suggest something to get rid of the this blank line at the beginning of the file.
Regards,
Athar

Extra blank line is actually provided for the FNAME node, but not displayed because of it has different structure with Record node.
Change the structure for FNAME to :
<FName>
<Data>
<Line>some file name</Line>
</Data
</Fname>
this way "some file name" will be dispalyed in the text file at the first line of file. To remove it use this trick, define the following values in Content Conversion Parameters:
in the Recordset Structure : FName,Record
FName.fieldFixedLengths = 0
FName.fixedLengthTooShortHandling = Cut
FNamee.fieldSeparator = '0'
FName.endSeparator = '0'
Record.fieldSeparator = 'nl'
Record.endSeparator = 'nl'
Rgds,
Triana

Getting Error while running a file adapter.

Hi all,
I am doing a small application where I need to read an image from a shared path and send the base64code of that image in response. For that I am using File Adapter and Read
operation. I have just hard coded the image name didnt give any wild card or expressions. I generated a service which is a proxy using the jca of that File Adapter. I added a stage
replacing the response body with the opaque element of the request body. When I run the proxy I am getting something like *"The invocation resulted in an error: "* in response
and in the stack trace I am getting *"Failed to set the value of context variable "body". Value must be an instance of {http://schemas.xmlsoap.org/soap/envelope/}Body."* as the fault
reason I am unable to detect where exactly I am going wrong. Kindly help me in resolving this.
Thanks,
Phanindra.

Not sure why you want to replace. Since the response of the proxy would remain to hold the request body by default.
If you have stored the opaque element in a variable ($var_opaque), then you can do the following.
XPath : .
In variable : body
Expression : $var_opaque
Check - "Replace node content"

File Adapter Getting Stopped

Similar Messages

Maybe you are looking for