File Adapter inserting New Line
All -
I'm stuck on this one. Would anyone know why the File adapter would insert a New Line at the beginning of my file? The file is output correctly with the exception of a blank line at the very beginning of the file.
Are there any conversion parameters I need to supply for the receiver file adapter? I currently have:
data.endSeparator = 'nl'
data.fieldFixedLenths = 30,30,15,3
data.fieldNames = F1,F2,F3,F4
data.fixedLengthTooShortHandling = Cut
Thanks,
Dave
Ok, found the issue!
The File Adapter is configured as FTP and when the file is FTP'd to the target directory and viewed using Internet Explorer, a carriage return/line feed is added to the beginnig of the file. When I FTP the file from the remote directory to my local directory and then view the file, it's fine. Not sure why Internet Explorer changes the formatting of the file.
Bottom line - the remote file is fine.
Cheers,
Dave
Similar Messages
-
Inserting new line to a text file at position #
Hi,.
Is it possible to do this in java?
1. Open a new text File (woutFile)
2. woutFile.write(" line #1\r\n"); // write new line
3. woutFile.write(" line #2\r\n"); // write new line
4.woutFile.write(" line #3\r\n"); // write new line
5. Go to line #2 position on a text file
6. Insert NEW LINE between line #2 and Line #3
7. move to the end-of-file
8.Close the file
Please helpIs it possible to do this? please look at question
inside comments.Your question has already been answered. Beyond that,
if you have some code and you want to know if it will
work, then run it and see.The answer was no. It's one of the fundamental properties of files that you cannot insert content in the middle, just at the end. To insert content you first have to make room for it. In this respect a file works like an array and not like a linked list. -
How to insert new line break in XSLT mapping
Hi experts,
I am doing file to mail scenario, i am sending the text file as an attachment using reciever mail adapter.
I did everything, i can able to send the mail with text file attachment, but with in the file i got multiple rows, i need to put line break in XSLT mapping.
I did use following statement but it is inserting small rectangle between the records, the records are not separating with new lines, all are in one line.
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
Can anyone suggest me how to insert new line in XSLT mapping.
My XSLT mapping as look like:
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ns0="http://www.Coj.co.za/SapIsuToABSA/DirectDebitFile">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="break"><br/></xsl:variable>
<xsl:variable name="space"> </xsl:variable>
<xsl:variable name="newline"><xsl:text></xsl:text></xsl:variable>
<xsl:template match="/">
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Please Check Attached Direct Debit File</Subject>
<From>S@za</From>
<To>P@za</To>
<Content_Type>text/plain</Content_Type>
<Content>
<xsl:for-each select="MT_SapIsuToABSA_DirectDebitFile/DirectDebitRec/Body">
<xsl:value-of select="Space1"/>
<xsl:value-of select="Cust_AccNo"/>
<xsl:value-of select="Reserve_1"/>
<xsl:value-of select="Cust_Name"/>
<xsl:value-of select="Cust_Name1"/>
<xsl:value-of select="Cust_Bank_AccNo"/>
<xsl:value-of select="Space2"/>
<xsl:value-of select="Cust_Bank_BranchNo"/>
<xsl:value-of select="Reserve_2"/>
<xsl:value-of select="Space3"/>
<xsl:value-of select="Cust_AccNo_1"/>
<xsl:value-of select="Space4"/>
<xsl:value-of select="Reserve_3"/>
<xsl:value-of select="Deduction_Amnt"/>
<xsl:value-of select="Space5"/>
<xsl:value-of select="Reserve_4"/>
<xsl:value-of select="Space6"/>
<xsl:value-of select="Action_Date"/>
<xsl:value-of select="Space7"/>
<xsl:value-of select="Reserve_5"/>
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
</xsl:for-each>
</Content>
</ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Kind regards,
PraveenHi,
I think <xsl:text>#xa;</xsl:text> should do the trick, but depending on which OS (ux or win), the "new line" chars sequence is different (win would require a CRLF like <xsl:text>#xd;*#xa;</xsl:text>)
Chris
-> &
Edited by: Christophe PFERTZEL on Apr 14, 2010 2:16 PM -
How to insert new line in the copied schema with transaction code PE01?
Dear Experts,
I have copied HKT0 to ZKT0 , i want to insert new line between line 150 and line 160 in ZKT0, I don't know how to insert new line 160, who can tell me ?
Looking forward to your reply.
Best Regards,
MerryHi,
1. Open your schema,
2. In first colume "Line" select line where you want to add new line,
3. Replace first value in the column field (that indicates number of line) with character I (means insert),
4. Press enter
The line will be added. The same way you can add lines to PCR.
To delete use character D.
Cheers -
Insert new line item in va01&va02 - urgent
Hi frndz,
At the time of creation standard sales order using va01.
When user enters the sold to party in header and then
material & quantity in line item reocrds. After user enters the details in first line. I have some checks to be executed and on the basis of that customer will get the free material that should come on second line item.
I am getting the details which i will be inserting on new line item but the problem is that in which exit i should write the code for the same.
So frndz could you please let me know, in which userexit I should insert this new line item. There can be more than one free material.
If anyone has done this already, please let me know.
I know one exit i.e.MV45AFZB but in that there are many forms. so exactly which form i should where i will write the code to insert new line item???
Points will be awarded surely.
Regards,
PrashantHI Stephen,
I have the same prolem. I modified the 5 global tables, but I don't see the new line in the screen.
Can you help me with some details?
Thx!
Mihaela -
How to write to a file with \n (new line)???
Hi there,
I have the following method that reads a file's content and convert it into a string:
public static String getFileContent(String fileName) throws IOException
File file = new File(fileName);
FileInputStream fileInputStream = new FileInputStream(file);
BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(fileInputStream));
StringBuffer stringBuffer = new StringBuffer();
String line;
while ( (line=bufferedReader.readLine()) != null )
stringBuffer.append(line+"\n");
return stringBuffer.toString();
}I'm trying to write a method that writes a String to a file WITH THE NEW LINE. All classes I used (DataOutputStream, FileWriter, PrintStream...) do not force a new line (I get everything in one line)
I thought maybe I should change the "\n" in the line
stringBuffer.append(line+"\n"); but...didn't know what.
thanks for any adviseBufferedReader readLine remove the newline sequence. But you're putting \n back which should do what you appear to want.
However newline sequence isn't always just \n, on unix systems it's \n, on windows its \r\n (reads "carriage-return, linefeed"). Sytem.getProperty("line.separator"); will get you the appropriate end of line string. -
File adapter OS command line - Calling a command remotely ??
Hi,
We have a scenario where in which receiver file adapter after putting a file on the FTP , a subsequent XML loader needs to be called which would load data into the client legacy ERP system.
There seems to be some idea about doing it through file adapter OS command line.
The problem is the how to call this loader command remotely from our file adapter OS command line.
Any help would be appreciated ???>> The problem is the how to call this loader command remotely from our file adapter OS command line.
The below link might be helpful ...
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature -
How to insert new line character?
Hi all,
I have two lines to print.
out.println("Available number of columns="+cols);
out.println("Number of columns must be present=10");My problem is:
i want both the lines to be printed one below the other. But, it is displayed in one single line.....
Can anyone please tell me how to insert new line character?
I tried with \n, '\n' and \r\n but, in vain......
Thanks for your time.
Regards,
AshviniYou should never use "\n" directly.
The line separator character is different on different operating systems.
And putting quotes around it in your string will make absolutely no difference in the JSP.
To find out what the line separator is you should use System.getProperty("line.separator");
The JSPWriter and PrintWriter classes will automatically use this property with a println statement, so a println will always finish with a line separator.
The issue here was that HTML by default ignores all whitespace.
The solutions provided
- use a <br> tag instead of a carriage return
- use <pre> tags, which tells the browser not to ignore whitespace. That can be troublesome in JSP which generates a lot of extraneous carriage returns into the code.
Cheers,
evnafets -
Inserting new line item into existing delivery using BAPI
Hi
can you send me the code for inserting new line item into existing delivery either using BAPI or
Function module.
We are using SAP 4.7 versionHi Sreekanth,
Refer to this links
New item for outbound delivery via FM/BAPI?
/message/3976349#3976349 [original link is broken]
BAPI_OUTB_DELIVERY_CHANGE Help - Add new line item
hope it is useful to you.
Regards! -
Hi,
I need to insert new line item into PO if the material entered is BOM material. My requirement is like this, If the user creates the PO with BOM material then i need to insert all the inside components as line item in that PO. Please suggest me any user exits avaiable or any way to achieve this( It's not a subcontracting PO).
Thanks,
Ganga.hi
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exch
PCSD0013 Customer-specific processing of an explosion for BOM br
**Please reward suitable points***
With Regards
Navin Khedikar -
BOM Change - Delete an item(s) and insert new line items
Hi,
We need to mass update BOMs like for some of the existing BOM's we need to delete some line items and insert new line items. We want to use the BOMMAT04 IDOC in LSMW but I'd like to know couple of things before I go ahead with that approach
For instance, I've a finished good material 12345678 and it has three components
a) Item 0010 Material 30101010 of quantity 10
b) Item 0020 Material 30101011 of quantity 11
C) Item 0030 Material 30101012 of quantity 12
Now, I'd like delete Item 0010 and add a new item 0040 Material 30101013 of quantity 13.
In the segment E1STKOM, there is LOEKZ (Deletion Flag) but I dont want to flag for deletion but instead delete the whole line item and add a new line item.
Is there any way to achieve this using BOMMAT04 IDOC? If not, can you please suggest me a better way to do it
Any help is greatly appreciated
Thanks,
SrinivasDear Srinivas,
1.IF you want to change for an individual BOM,use CS02,select the item which you want to delete,select the entire and click on
delete button and then add new line items and save.
2.For Mass changes of BOM you can use CS20.
3.Check these functional module's also if you want to change using a report,
CS_BI_BOM_CHANGE_BATCH_INPUT Change bill of material via batch input
CSEP_MAT_BOM_SELECT_CHANGE API Bills of Material: Select BOM(s)
CS_CL_P_BOM_MASS_CHANGE
CS_CL_S_BOM_CHANGE_COMPLETE
Check and revert back,.
Regards
Mangalraj.S -
Insert new line items in Delivery
Hello All,
Is there any BAPI or FM in which i can add new line item in SD delivery vl01n? The new line item will not be there in SO , but i want it in delivery. Manually i can insert new line item using VL01n , but i need FM to do the same.
ThanksHello,
I need a Bapi or FM through which i can add new line item in delivery , maybe while creation of delivery or changing the delivery i.e. via VL01n or Vl02n. The new item will not be there in SO. It is a non valuated material.
Helpful answers will be rewarded.
Thank you -
Insert new line using rule in InfoPath 2010
Hi All,
How to insert new line on the multiline textbox using rules. I followed the below article. But it didnt help to resolve the issue.
http://blogs.msdn.com/b/infopath/archive/2005/03/04/385577.aspx
Any help would be appreciated.
Rajasekar A.CHi,
I followed the above link and it worked for me. Can you please make sure if the formulae is verified by clicking on "Verify" after entering following lines?
concat(field1, @crlf,
"Hello, world!")
You can even try this link
http://www.sharepointmaestra.com/Blog/Post/4/InfoPath---Appending-Text-in-Multiline-Field-with-Line-Feed
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered -
CLIENT_TEXT_IO : cannot insert new line into a text file
Facts:
Developer 10g
AS 10g
Web utility
Problem:
i am traying to
Open a text file. using CLIENT_TEXT_IO.FOPEN
insert a record in to a text file using CLIENT_TEXT_IO.PUTF
insert a new line using chr(10) or CLIENT_TEXT_IO.NEW_LINE
or CLIENT_TEXT_IO.put_line
insert the next record
Close the file.
all work except insert a new line
Why !!!
it was Working fine in 6i, but now in 10g and Webutil is not working
plz helpHi you can put a new line in a text file using System.getProperty("line.separator"). This implementation will work for every OS.
import java.io.*;
class Demo{
public static void main(String args[]) throws Exception {
FileWriter fr = new FileWriter("FileDemo.txt");
fr.write("AAAAAAAAAA");
fr.write(System.getProperty("line.separator"));
fr.write("AAAAAAAAAAA");
fr.close();
} -
How to insert new line in a text file
hi all,
i wnat to know how can i insert a new line in a text file using java.
for example i want the formate of the text like this
1 2 3
4 5 6
until now i know only how to insert data but not new line.
Thanks in advandceHi you can put a new line in a text file using System.getProperty("line.separator"). This implementation will work for every OS.
import java.io.*;
class Demo{
public static void main(String args[]) throws Exception {
FileWriter fr = new FileWriter("FileDemo.txt");
fr.write("AAAAAAAAAA");
fr.write(System.getProperty("line.separator"));
fr.write("AAAAAAAAAAA");
fr.close();
}
Maybe you are looking for
-
Mini Display Port to VGA adapter with Mac Pro
Just as a word of advice if you're thinking of buying a new Mac Pro and planning on hooking it up to dual VGA displays at their native resolutions - don't. Apple claim it will support 3 VGA displays. That might be true in a very loose sense but not i
-
PL_TIMEOUT in Sync Async scenario using BPM
Hello: We sporadically get PL_TIMEOUT error in a S/A scenario. Every time the error occurs when it is trying to close the Synch Asynch bridge in the BPM. The BPM is extremely simple but it often runs for a long time (5-8 minutes) esp in the close S/A
-
Is it possible to run AirTunes without a cable modem or any of that stuff?
Hi all, I have an airport express base station and an airport extreme card in my machine (Powerbook G4). I got the base station as a gift, and all I want to do with it is play AirTunes. I don't want to print from the hallway or download anything from
-
My MacBook starts, but only to the white window
My MacBook will start and make the sound, but after it starts loading in the white screen with the apple, it doesn't get any further. Left it up overnight and it only ran the battery dead.
-
SOA Application specific logging
Is is possible to have separate log files for each SOA application? If so, how to do it? Thanks, Ram