File Adapter Linux File Permissions

Hi,
When we use the File Adapter from BPEL process to write a create a file, it creates with permission 403.
We need to create the file with permission 775.
Which is the best way to do that?
Thank You.
JP

Hi. I don't think you can do this on an adapter-base. As far as I know there are no properties you can set in file adapter wsdl. I see three possibilities (but I've never used them myself).
First possibility is to set default permission for user who runs adapter (usually this is oracle under which Oracle Software is installed). This can be done by using command umask. Below is some more information on this topic.
The most common umask setting is 022. The /etc/profile script is where the umask command is usually set for all users.
Second possibility is to create file with 0 byte by writing custom java and then invoke adapter with append option. For a complete list op properties on file adapter see Chapter Oracle JCA Adapter Properties in Oracle Fusion Middleware User Guide for Technology Adapters.
Third possibility is by writing your own file adapter. By that you have full cntrol on behavior but it will be time-consuming.
Hope it helps.
Regards, Jos.

Similar Messages

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 <b>value2</b> value3
I want to ignore <b>value 2</b> but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File adapter created file permissions at OS

Hi,
We have a file adapter scenario and once we run the scenario at OS level the file is being created with following permissions.
<b>-rw-r----- </b> 1 xisadm sapsys 19789000 Oct 10 17:01 File10024322.txt
So it is not being processed further till we change the permisions to<b> -rw-rr</b> .
Is there any place in XI where we can change to write the file at OS with <b>-rw-rr</b> permisions.
Thanks
Sunil

Moorthy,
This is XI writing the file at OS and not XI not reading the file.
But in one of our DEV env the file is being created with <b>-rw-rr </b> permissions after changed some thing , which we are not sure now. Now we have the same issue in production. Bye the way OS is AIX.
We would like is there any place in XI we can change so that XI can write the file to have "others" to <u>read</u> the file.
thanks
Sunil
Message was edited by: Sunil Guditi

CONFIGURE FILE ADAPTER ,get files one by one.

HI, I have cinfigure one system of FILE ADAPTER TO JDBC ADAPTER, is working OK, but I need to Know how configure The FIle adapter to get files one by one from the folder , I have the channel configure between 30 seconds, but when come to look for the files has them all ... I need to get one by one the files.
Help me... RGRDS.

Hi ,
What is the operating system of your PI server sytem? If its unix/linux you can achieve this using shell scripts, for windows systems you need batch files. The script/batch file would run in background continuously. It will check how many files are present in a directory (say xyz) . Then one by one transfer the files to directory(say abc) from where PI picks up files at regular interval. you need to use "sleep()" command in script so that the script puts files after some time interval say 90 seconds. The polling interval of comm channel in PI should be set less than sleep time interval of the script.In file sender adpater configuration please set the Processing Parameters -> Processing Mode-> Delete/archive. The script before putting a file in "abc " checks presence of any files. If there are some files it goes to sleep mode for few seconds and continues checking unless "abc" is empty. Then the script moves(as we do cut and paste in windows) file in "abc" directory.
regards
Anupam

Can file adapter read file link/short cut

All,
I have a requirement for following use case
Can file adapter read a file-link (basically a short-cut to a file in a folder) and check if the file exists at the path referred to in the short-cut.
Thanks,
Praveen

Hi
symbolic link did not work
polling folder - "/tmp/filepoll"
soft link - "/tmp/filepolllink" ponits to above folder
my OS is Sun Solaris
error in opmn.log
<2010-03-24 07:46:55,023> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
<2010-03-24 07:46:55,025> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11001
Invalid Input Directory.
The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "/tmp/filepolllink".
Ensure that the following conditions are satisfied for the input directory :
1) It exists and is a directory (not a file). and
2) It is readable (file read permissions). and
3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.
Thanks,
Praveen

Reciever File Adapter - Temp File Name Scheme using Variable Substitution

How can I create a temporary file that uses variable substitution?
We are having a problem with files merging when we write files using the "Use Temporary File" setting on the FIle Adapter. So two independent files are merging into a single file. We are not using the "Append" setting.
We would like to use a Temp File Name Scheme that would append the message id onto the temporary file name.
Using variable substitution we created a msgid variable. When added to the temporary file name using %msgid% the temporary file name is created with %msgid% in the name instead of the actual message id. We put the variable into the "File Name Scheme" as well and the end completed file used the message id in the name.
Any Ideas?
Thanks,
Matt

HI Matthew,
Why are you adding the message id into the temporary file??
I understand that you want the output of the filename to contain message id .. and hence you are using variable substitution for the same.
Temporary file name will anyways get overwritten by the actual file name (here the actual filename will be using variable substituion).
So i suggest to achieve your scenario you can add any name in the temporary file and maintain the desired filename you require as output in the variable subsititution.
Temporary File Name option actually acts as a lock - unlock mechanism from PI side while the file is getting written to the file server so that while PI is writting the file no third party application batch program picks it up.
I hope this helps.
Cheers
Dhwani

File Adapter: Dynamic file name

Hello,
I would like to use a filename like this:
Name.<DOCNUM>.Direction.<Timestamp>
For DOCNUM I use variable substitution. Works fine.
For <Timestamp> I need a different format as the timestamp function
in file adapter create. So I try to set up my timestamp in mapping like
dynamic file name:
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
conf.put(key1, a);
Input a is date function which creates my desired timestamp format. In file adapter I try this:
Name.%DOCNUM%.Direction.%Timestamp%
or
Name.%DOCNUM%.Direction.Timestamp
or
Timestamp
all doesn't work for Timestamp.
So is there a possibility to configure a dynamic filename like this???
Is there a possibility to access dynamic configuration variables in dynamic filename except
the known for filename and directory??
thanks
chris
Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

your file name needs to be
Name.<DOCNUM>.Direction.<Timestamp>
dont use variable substitution. use only dynamic configuration and set the file name
introduce a logic that will create the string
Name.<DOCNUM>.Direction.<Timestamp>
eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
Ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

XI 3.0 File Adapter: Converting File Content in Sender Adapter

Hi,
This is probably a basic question but does anyone have an example of the parameters used when you are using the 'Converting File Content' option on the File Adapter ?
Also, where do the record sets have to be defined ? Are these data types in the Integration Builder ?
The documentation is to say the least a bit flaky.
Any help would be appreciated.
Kind regards
Colin.

Hello,
I'm wondering if someone has experience setting up conversion for different record structures. The example shown (in a greate way) only picture one kind of structure.
How should it be done if the file would contain
10Mat1
20100PCS
The first record structure has columns
ID(2),Material(10)
The second redcord structure has columns
ID(2),Quantity(3), Unit of messure (3)
Brgds
Kalle

XI Receiver file adapter : Dyanmic File PATH

Hi,
Appreciate if someone could help me on the issue below:
I have a receiver File adapter with a dynamic target directory as per below:
Target directory: /test/YYYY/MM/DD
the value for YYYY (Year) , MM (Month) and DD (Date) will be the date when the file being transfered from the sender.
Appreciate if someone could help me to achieve this. I know we can use the variable substitution however it doesn't allow us to set a systems field such as sy-datum.
Cheers,
ZAB

Hi,
Populate this value in your payload , and then use Dynamic File Name concept of File Adapter.
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
bhavesh

Receiver File Adapter - Create File on another SAP System

I am working on a project that includes this requirement: PDF files to be copied from a third party company via SFTP to a directory on our ECC system.
We have worked out the sender side config, and the transfer of the files into PI works fine via SFTP.
However, the PDF files are ending up in a directory on the PI system and not on our ECC system as expected.
The receiver communication channel is set up as follows:
Party = blank
Communication Component = communication component of the ECC business system
Adapter type = File
('Receiver' is ticked)
Transport Protocol = File System (NFS) (etc)
Target directory = /tmp (using this temporarily for testing)
I would have thought using the ECC business system would mean the files would end up on that system, but instead they end up on the /tmp directory on the PI system.
We are not permitted to use FTP between our SAP systems, so I can't go with that option.
I've searched for help on this and only see conflicting and vague statements about whether the NFS protocol can or can't be used for transfer to another SAP system in the landscape.
Any suggestions and help on the above, and the best method of transferring the files to the end SAP system would be very appreciated.
Regards,
Christine

remember that NFS means that it is referring to a file system on PI server.
What you could do is mount a space on SAP PI onto SAP ECC so that ECC will be able to access the files on SAP PI.
Guess that should solve the problem.

Receiver File Adapter with File content Conversion

I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.

Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

File adapter: Receiver File Content Conversion problem.. XML to CSV..!!

Hi,
I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
- <RECORDSET>
- <Header>
<LineItem>1</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>2</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>3</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
</RECORDSET>
</ns0:PaymentFull_Target>
Output File is coming only with lineitem values , remaining fields are not coming.
*1,2,3*
FCC Used...
RecordSet Structure -- Header
Header.fieldNames -
LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
Header.fieldSeparator----- ,
Header.endSeparator----- 'nl'
Did I miss anything.. any idea whats going wrong?
Thanks
Deepthi

Hi Deepthi,
Mention the occurrence of header in Recordset
You specify like this:
Recordset: Header, *
Header.fieldSeparator : u2018Field Separatoru2019
-->For FCC on Receiver side you donu2019t have to mention the field names.
-->The u2018endSeparatoru2019 parameter needs to given for substructure only
Check this links:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Rgds,
Akhila

Problem in File Adapter jca.file.FileName

Hello, I have problem in sending variable data to the file adapter property
I have defined Variable FlowData of Type Element from a XSD
When I am trying to assign the variable data to the File adapter it is throwing error
*<bpelx:inputProperty name="jca.file.FileName"*
variable="flowData"
query="ns2:flowData/ns2:fileInfo/ns2:name"/>
Error query "ns2:flowData/ns2:fileInfo/ns2:name" is invalid, because step 'ns2:flowData' is not valid.
Please help me!!

Hi,
Try to add a slash */* at the beginning of the xpath...
*/ns2:flowData/ns2:fileInfo/ns2:name*
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
https://forums.oracle.com/forums/ann.jspa?annID=330

File Adapter Linux File Permissions

Similar Messages

Maybe you are looking for