File adapter picking up files with wrong content

Hello, We configured a file adapter to read *.xml files. We also defined the xsd for the files. We expected that the adapter would only pick up files that conform to the xsd. However we found that all *.xml files (even renamed jpeg's) are read. Is this intended behaviour? Or did we miss some configuration setting?
Richard

A short follow-up:
To make matters worse. If I take a completely different file (like the jpeg) and rename it .xml it gets picked up by the file adpater but there is no audit trail of the BPEL process instance. The file is not archived either, so it's completely gone! If I just change one of the elements the file is read and archived. I can also have the file adapter write the file with the wrong content.
I found a reference to a bug. (bug 5926809 or SR 6327165.994) is this related, is it solved?
Richard

Similar Messages

Sender File Adapter: Picking of Files

Hi,
I have a requirement where in my file adapter has to pick files from a FTP server after 10 minutes of its creaion on the FTP server. Some application will place file on this FTP server exactly after 10 minutes of its creation on this FTP server only it should be picked by the sender File Adapter. Is there any way to achieve this? Please provide me your thoughts on resolving this.
Thanks,
Vijay Kumar T.

>
Vijay Kumar Thirumareddi wrote:
> Hi,
>
> I have a requirement where in my file adapter has to pick files from a FTP server after 10 minutes of its creaion on the FTP server. Some application will place file on this FTP server exactly after 10 minutes of its creation on this FTP server only it should be picked by the sender File Adapter. Is there any way to achieve this? Please provide me your thoughts on resolving this.
>
> Thanks,
> Vijay Kumar T.
as mentioned by suraj, the ideal way is to have a spearate folder where the files will be moved after the 10 minutes of its creation.
PI/XI will poll this folder and pick files.
out of curiosity, can i know why there is such a requirement of 10 min?

Reg: Sender File Adapter - Picking the files serially

Hi Folks
I have a requirement where I require help from you with you valuable suggestions/solutions. Requirement is :
1. Two different folders(folder1 & Folder2) at sender system, PI has to pick the files from Folder 1 and needs to process to target.
2. Exactly after 30min duration PI has to pick the files from the second folder i.e., from Folder 2.
Conditions are :
i) Only after processing the files from Folder 1 PI should process the files from Folder2(after 30min).
ii) We might have many files(approx 10 - 15files) in each folder, PI must poll all the file in the folder in a single poll(i.e., without any delay).
Please suggest me what could be the best solution for this, either to create two communication channels or can we handle it using a single communication channel.
Kindly suggest.

Hi Suman,
The easieiet way is to use single communication channel to pick up all the files from the first folder. Then run a unix script in after processing column where it will check for any files to be picked by xi in folder1 and then proceed with transferring files from folder2 to target.
By this, you are making the scenario simple and realistic.
There are other alternatives like using two communication channels and the only hurdle will be the timing to check whether the folder1 files have been completely picked up or not.
Regards
Krish.

File adapter picking up file before them is completely written

HI all
My problem is that, a sender communication channel (FTP) pick up the file before them is completely written on to the FTP folder.
the parameter "Msecs to Wait Before Modification Check" is in 6000, but the CC pick them up.
Please help!
Thanks.

Hey
>>Msecs to Wait Before Modification Check
The above parameter is only applicable when picking file from NFS,it has no effect on FTP.
To solve your problem,please look at question 3 of SAP Note 821267
Thanks
Aamir

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

File Adapter not processing Files which has COMMA in it

Hi Experts,
I am working on Project in SOA 11.1.1.6.
I am trying to process a file which has comma in it. for eg - XXXXXXX-XX_XX_XXX11,99.pdf
I am picking the file using file adapter from SOURCE directory and using another file adapter to WRITE to destination directory. Polling processing is working fine.
I am picking the file from SOURCE directory as ATTACHMENT and WRITING to DESTINATION folder through File Adapter
While doing file WRITE its failing. While reading the file the values of Content Type, Character Set and Encoding are NULL for the ATTACHMENT as they are optional properties.
The error I am getting while File WRITE is
<remoteFault>
<part name="summary">
<summary>java.lang.RuntimeException: Failed to decode properties string att.encoding=null,att.charset=null,att.contentId=AReadFile/XXXXXXXX_XX_XXX11,99.pdf_1352184009640,att.contentType=null,att.partName=attach</summary>
</part>
<part name="detail">
<detail>1</detail>
</part>
</remoteFault>

Comma is usually treated as a separator/delimiter and hence it is not really common to have comma in filename. I think because of this reason File adapter does not support it (have to cross-verify). If you really have a requirement to read/write files with comma in filename then better log a SR with Oracle support.
Regards,
Anuj

How to use File Adapter to transport files

Hi,
Can i use File Adapter Additional Files settings to Transfer files from one system to other without conversion?
File Adapter's Additional Files documentation says "additional attachments require a receiver that can process them". In my case receiver is also
File Adapter.
Please let me know if there is any other way to achive this.
Thanks in Advance
Jayant

Hi Jayant -
Here is the link to the documentation related to this:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Notice in "Rules for Additional Files":
"Messages with additional attachments require a receiver that can process them."
Currently, the receiver file adapter does not support the processing of attachments.
Regards,
Jin

File Adapter not writing file when processed from one node in a clustered environment

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

File Adapter Stores temp file?

I'm assuming a sender file adapter will store a copy of the retrieved file in the OS somewhere. Does anyone know where this file would be stored and does it only exist until the adapter has completed processing of the file?

Sorry folks I don't think I was clear in my original question. All I want to know is when the sender file adapter connects to some remote system to retrieve a file...
1) Does XI physically move the file to the XI box (regardless of the archive/delete/test setting) or does it simply load it in RAM? For the adapter to be able to process the file my assumption is that it has to be loaded somewhere on the XI box.
2) If it physically moves the file to the XI box where does it temporarily place it?
I'm aware of the archive setting and other options for creating local copies. I just want to know the "inner workings" of how the sender file adapter moves the files.

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

Can sender file adapter read plain files with different structure?

Hej experts,
I am facing the following sutiation in FIle-to-Mail scenario:
Bank sends two types of file : CONTRL and BANSTA to the same directory where XI shall pick , map to other stucture (mail structure ) and send mail.
You can not identify the file type( CONTRL or BANSTA) from file name - only from file content.
Would it be possible for XI to pick up file, check the structure and select the right XML structure to transform to?
Any other solutions?
Thak you for your help,
Natlaiya

You can not identify the file type( CONTRL or BANSTA) from file name - only from file content.
Would it be possible for XI to pick up file, check the structure and select the right XML structure to transform to?
If not wrong even XI/ PI cannot understand it.....if you say you can implement an adapter module to do the file conversion....even in that case you will need to know the file format....do you need to implement any conversion on the file?
Regards,
Abhishek.

Text Content Conversion - File Adapter - Creates empty file

I am running XI 7.0.
Mapping from abap proxy to file - text content conversion.
The process works, generates and sends file from mySAP, maps through XI, logs onto ftp site and creates file, but doesn't write any data into the file!
I am really confused as to what is happening!
This is taken from the communication channel!
Audit Log for Message: 5ccc2e46-c0f2-5349-e100-00000ddf240f
Time Stamp Status Description
2007-04-28 10:37:21 Success Message successfully received by messaging system. Profile: XI URL: http://host.fqdn:55000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-04-28 10:37:21 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-04-28 10:37:21 Success Message successfully put into the queue.
2007-04-28 10:37:21 Success The message was successfully retrieved from the receive queue.
2007-04-28 10:37:21 Success The message status set to DLNG.
2007-04-28 10:37:21 Success Delivering to channel: EPIW_FTP_Receiver_EmployeeRecords
2007-04-28 10:37:21 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2007-04-28 10:37:21 Success File adapter receiver channel EPIW_FTP_Receiver_EmployeeRecords: start processing: party " ", service "XE_DEV_3RD_EPIW_001"
2007-04-28 10:37:21 Success Connect to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target"
2007-04-28 10:37:21 Success Write to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target", file "epiw_output.dat"
2007-04-28 10:37:21 Success Transfer: "BIN" mode, size 125 bytes, character encoding -
2007-04-28 10:37:21 Success Start converting XML document content to plain text
2007-04-28 10:37:21 Success File processing complete
2007-04-28 10:37:21 Success The message was successfully delivered to the application using connection File_http://sap.com/xi/XI/System.
2007-04-28 10:37:21 Success The message status set to DLVD.
I can see the data before and after... Any ideas?

hi,
this is starange:)
did you refresh FTP (F5) ?
maybe you're checking wrong ftp server? with the same folders ?
ups - I thought I doens't create any file...
as suggested check your mapping as per my blog:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
just use TCODe for abap mapping tests - SXI_MAPPING_TEST
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File Adapte picking up XML if XSD valid without verifing the XSD in adapter

hi',
I am facing one issue
I have a sample XML file which I want to read through BPEL process
for this I have configured the file adapter with the schema and reading the file adapter with the receive activity
next I have created one XSD file (which file adapter referes to) and one XML file,
File adapter reads it after the XML file gets validated with the XSD which is kept in a location *'/test/xsd/emp.xsd'*,
now the issue is that the file adapter is picking up and initiating the process without verifying the XSD mentioned in the adapter
it is only checking the XML file with the XSD mentioned in the XML,
for example if I have a xml file which is refering to some other schema it also gets read by file adapter without worring about what schema is mentioned in file adapter
please advice me is this the way File adapter works in Oracle BPEL or I am doing some thing wrong
I am using SOA suite 10.1.3.3.0 which is deployed in UNIX enviornment.
thanks
Yatan

thanks Ketan ,
as you suggested, after adding validateXML to true, the XML is getting validated to the XSD in the adapter,
the process is getting invoked and the receive activity is throwing error of 'Invalid XML', this is perfect as I expected
however now the issue is, the file which is invalid in terms of XSD present in the file adapter is still being archived to 'success dir' i.e. 'LogicalArchiveDirectory', ideally it should have moved to fail directory,
but if the XML file is not complete or having some error in terms of the XSD it is refering to 'target namespace' and 'target location'
then it will move to the fail directory and the receive activity is also showing the error,
see this is how I have configured my bpel.xml file for the file adapter.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Tph_ProdTrans_File">
<property name=*"prod_trans_success_file" type="LogicalArchiveDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/success</property>
<property name=*"prod_trans_incoming_file" type="LogicalDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/new</property>
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file:///aaa/bb/ccc/wis/tph/bpl_inbound/adjust/fail</property>
</activationAgent>
please advice how to bring this adapter to proper behaviour.
thanks
Yatan

Sender File Adapter picking the same file twice

We are facing a weird issue with File Sender Adapter
We are using PI File Adapter ( NFS ) to read files for a NFS folder and
processing those in PI.Normally it works fine. But for a scenario we
are noticing it sometimes process the same file twice before archiving,
thus duplicating the financial postings.
What we have is :
File Sender Adapter - NFS, Polling interval 60 secs, and Processign
mdoe Archive. File name includes Wildcards - JE_Upload*.txt
what we are noticing is that :
when it picks up a file, it immediately polls again to check for
another file, and sometimes the file is not yet archived so it picks up
and reprocess the same file.
If you see the message below, both belong to the same file, and it
picked up the same file again in 12 secs after processing it the first
time
Successful 02.11.2009 15:01:00 02.11.2009 15:01:01 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Successful 02.11.2009 15:00:49 02.11.2009 15:00:50 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Anyone seen this behavior before?

Hi,
Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
archieve directory.
-Warm Regards,
Gouri

File adapter picking up files with wrong content

Similar Messages

Maybe you are looking for