File already exists in catalog error message

When trying to scan a photo into the PSE 8 Organizer, I get the message "The file already exists in the catalog".  It indicates the file c:/users/user/AppData/Local/Temp/PSAlbumImport/2014-02-23-1315-04/Image1.jpg.  This file contains the image that I scanned in but it won't import into the Organizer.  I now have several scanned photos with this problem, all in different directories.  How can I fix this?

My scanner software requires me to scan to photo software when scanning slides or negatives so the folder suggestion does not work.
I have found a work around . I now scan into the organizer of my PSE 5 program which then shows up in the browser as new files when I open PSE 9.
The PSE 5 program will scan all 4 slides without any problems. This didn't fix the problem in PSE 9 but I can get my scans done.
I just wish Adobe support would get off their *** and respond to problems. I emailed them a week ago and have not received any response.
Thanks for your response.

Similar Messages

  • How to fix 'file already exists, code 6' cs5.03 win7 64bit bluray please

    hello,
    at the last part of a 31gb bluray h264 iso image burn
    encore stops responding for 20 minutes (disappears from task manager
    and performance monitor entirely) and then says 'code 6 file already exists'
    the same error has occurred twice at the very end of the build
    i cleared the preferences each time
    any help is appreciated...
    jeffrey

    hello,
    after a lot of reading and
    some digging, figured out
    how my system does things:
    when you tell encore to write a bdmv folder
    you come out with 2 folders: bdmv and a temp folder
    using image burn you load up the first bdmv folder which contains
    the streams, etc.
    then tell image burn to load up the certificate folder
    which is hiding in the temp/db/certificate directory
    very clever...
    disc burns successfully and menu navigation in tact on pc
    and on hdtv through set top bluray
    thanks for all the help...
    have a great day...
    jeffrey

  • Import from scanner give error message "This file already exists in this catalogue"

    I can import from the scanner occasionally, but often times get this error message.  " this file already exists in this catalogue" and the scanned picture is discarded.
        I see others have had it as well, but no solutions were posted. I'm running Photoshop elements 11 with all current updates.

    Thanks for the reply. My Image wasn't in a version set however.   I scanned a new photo which was successsful. I then scanned a second photo different from the first, which failed.  I think possibly the software for my HP scanner is at fault, since it always names the scans as image1.jpg. It doesn't give an option to increment successive scans to a different name which probably caused the problem.

  • Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

    It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
    Windows 7 Ultimate 64bit,
    Intel Core i7-2600K Sandy Bridge 3.4GHz,
    CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
    G.SKILL Ripjaws X Series 16GB,
    EVGA GeForce GTX 460 (Fermi) 2GB ,
    Matrox MXO2 with MAX,
    COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
    Adobe CS 5 Production Premium
    thanks in advance

    Thank you ram8kumar. I will answer step-by-step, as you did:
    - there is no subtitle in the project
    - .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
    - Disc name is not blank
    - there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
    Lest two might be the problem.
    - I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
    - Audio and video  track duration in the timeline was 1(one) frame  difference.
    Thank you agan, and I will post the results as soon as I will get done with it.
    Vladymyr.

  • PSE 9 and 5 will not import - says the file already exists in the catalog !

    I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
    Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
    I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
    I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here  that it will not import files if the same name is somewhere else. That alone is a problem.  But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
    Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
    Any advice or similar experiences eagerly welcomed.

    Thank you for replying, dj paiqe.
    Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
    I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
    I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
    Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
    I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
    I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

  • Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

    Hi There,
    All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
    Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
    Some of the specified files already exist in the target location. The files marked below will be replaced:
    filename.eps
    filename-01.eps
    We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
    All machines are new Quad-core MacPros running:
    - Leopard 10.5.8
    - Illustrator CS4 14.0.0
    We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
    Is anyone else experiencing this behavior?
    Any help or pointers in the right direction would be much appreciated.
    Cheers
    Ben

    Thanks for the reply.
    The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
    Why do we still use eps?
    Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
    Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
    But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
    Cheers, and thanks for the help.

  • Database Adapter Configuration Wizard "File already exists" error

    I'm uding JDeveloper 10.1.3.1 on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
    The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
    When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
    I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
    If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
    Does anyone have any suggestions?

    I am facing the same issues.
    I want to pick the new files and retain the files after polling.
    Any idea on this would help me to solve this issue.
    Thanks in advance.

  • Having trouble downloading a free trial of adobe acrobat xi pro - error keeps saying that an adobe file already exists

    Hio,
    I'm trying to download the application Adobe Acrobat XI pro - but every time I go through the download process, it comes up with an error that says it can not download because an adobe file already exists in the folder.  I don't have XI Pro downloaded.  Any thoughts?

    Update... Derp... Had it already loaded and didn't even know it..

  • The cluster service terminated, error 7024, cannot create a file when that file already exists

    I have a test 2-node Failover cluster using Server 2012 R2
    As of last night the cluster service on one of the 2 nodes is down with this error:
    The Cluster Service service terminated with the following service-specific error: 
    Cannot create a file when that file already exists.
    EventID 7024
    The Cluster service waits 60 sec, tries to start, and the same error occurs again. 
    Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
    thank you.
    samb

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.
    Regards
    Ashmi

  • Adobe workbench errors on checkin:  Asset already exists / file already exists

    Adobe workbench for Myserver checkin gives errors:  "Could not create the asset because the asset already exists" and/or "File already exists in global store with that name".  How does one fix this? 
    This seems to especially happen when I change login to workbench user/configuration/"mode" etc.

    If worst comes to worst:
    Save relevant directories in completely separate windows backup directory path.
    Remove all sub-folders from LC workbench (everything below the /1.0 leaf).
    Restore directories from backup path.
    This seems to ALWAYS work.

  • EXPDP generates new dmp file and reports "file already exists" error

    Hello everyone,
    Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
    I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
    expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
    ORA-27038: created file already exists
    Additional information: 1
    Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
    Your advice is highly appreciated.
    Thanks.
    Edited by: 904668 on Dec 27, 2011 8:47 AM

    i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

  • Restore (file already exists)

    Hello
    1-)Why does restore fail in below scenerio?
    2-)'C:\TEST.DBF' datafile is not in my backupset,Why oracle attempts to restore it?
    rman target /
    Recovery Manager: Release 10.2.0.1.0 - Production on Sun Jul 26 12:29:42 2009
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: XE (DBID=2563855341)
    RMAN> backup database;
    Starting backup at 26-JUL-09
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=38 devtype=DISK
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00003 name=C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF
    input datafile fno=00001 name=C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF
    input datafile fno=00002 name=C:\ORACLEXE\ORADATA\XE\UNDO.DBF
    input datafile fno=00004 name=C:\ORACLEXE\ORADATA\XE\TEST1.DBF
    input datafile fno=00005 name=C:\ORACLEXE\ORADATA\XE\TEST2.DBF
    input datafile fno=00006 name=C:\ORACLEXE\ORADATA\XE\TUNTEMP.DBF
    channel ORA_DISK_1: starting piece 1 at 26-JUL-09
    channel ORA_DISK_1: finished piece 1 at 26-JUL-09
    piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2009_07_26\O1_MF_NNNDF_TAG20090
    726T122957_56R8JRNJ_.BKP tag=TAG20090726T122957 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:02:18
    Finished backup at 26-JUL-09
    Starting Control File and SPFILE Autobackup at 26-JUL-09
    piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_5
    6R8O2N0_.BKP comment=NONE
    Finished Control File and SPFILE Autobackup at 26-JUL-09
    C:\Documents and Settings> sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 26 12:32:44 2009
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    sys@XE> create tablespace test datafile 'C:/test.dbf' size 3m;
    Tablespace created.
    sys@XE> shut immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    RMAN> restore database;
    Starting restore at 26-JUL-09
    using channel ORA_DISK_1
    creating datafile fno=7 name=C:\TEST.DBF
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 07/26/2009 12:41:17
    ORA-01119: error in creating database file 'C:\TEST.DBF'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already existsIf I restore old controlfile, it again gives the same error,old controlfile doesnt aware of the new tablespace, and this new datafile is not in my backupset. so why it gives this error?
    RMAN> restore controlfile from autobackup;
    Starting restore at 26-JUL-09
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=35 devtype=DISK
    recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area
    database name (or database unique name) used for search: XE
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_
    07_26\O1_MF_S_693234306_56RBLMM1_.BKP
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
    Finished restore at 26-JUL-09
    RMAN> restore database;
    RMAN-03002: failure of restore command at 07/26/2009 12:41:17
    ORA-01119: error in creating database file 'C:\TEST.DBF'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists

    Hi Bobo Dasilva,
    What you showed according to your output is you created an autobackup without the info on the datafile called:
    C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_56R8O2N0_.BKP
    Than you created the tablespace which implictly created a new controlfile autobackup because you changed the structure of the database.
    C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693234306_56RBLMM1_.BKP
    This last controlfile autobackup is than used by the restore process which is the reason the controlfile is aware of the extra added datafile.
    Best would be to to force the restore of the controlfile from O1_MF_S_693232337_56R8O2N0_.BKP if you want the controlfile not to contain the info.
    Regards,
    Tycho

  • "file already exists in the destination" during application build

    I am trying to build an executable and have gotten the following error:
    The file already exists in the destination.
    C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\Sentech LV 82\Shared Library - Trigger SDK\StTrgApi.dll
    WHen I start the build I go to "Build Executable" then click "Build"
    The VI for the project I have open is the Startup VI and I do not list any Dynamic VIs or Support FIles.
    I am using Labview 8.2
    I installed a user library for a USB camera from Sentech wich I am using and it works fine in Labview 8.2
    When I try to do the build I get the error shown above. The file it is referencing is there along with the .lvlib file.
    I tried removing the file shown in the error message to see what would happen and I continue to get the same error even though the file is not there. I even restarted LV and still got the same error.
    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith

    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith
    Hi Keith,
    you can check this Link out for a tutorial on app builder.
    Regards,
    Denver 

  • Cannot create a file when that file already exists, but should overwrite

    Hi,
    I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
    for eg., Sender side : Yeswanth.txt
    and also receiver side   :  Yeswanth.txt
    but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
    Processing parameters i has given on Receiver side:
    File Construction Mode  :  Create
    put file  : Use Temporary File
    and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
    Error getting receiver side at communication channel :
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
    Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
    Yeswanth.txt: Cannot create a file when that file already exists.
    Reward points for useful answers.
    Regards,
    Yeswanth.
    Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.
    Regards
    Ashmi

  • FTPEx: 550  : Cannot create a file when that file already exists.

    Hi experts,
    I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
    In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing  Error message.
    ' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
    and this error message is not displayed for all the target files , some files are getting created succesfully.
    After some times , the file in error status , gets created automatically.
    What may be the reason.?
    Thanks in advance .
    Best Regards,
    Anil

    There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
    Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
    14.      Select the File Construction Mode.
    u25CB       Create
    The file is created. The document received last is saved in each case.
    If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
    You can only set the indicator if you select Use Temporary File under Put File below.
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Maybe you are looking for