File and directory restructuring

I just moved all my PSE8 contents to a new computer using backup and restore, and it worked fine.  however, the directory structure on the new computer isn't ideal;  PSE uses the whole "documents/settings..." structure from the source location, which creates a bit of a convulted structure.  it works, but its messy.  I'd like to change it. I can think of two ways of doing it but would like some recommendations and thoughts before i proceed.
1.  Use the "move" command to take logical groupings of photos and move them to a different file/directory structure.  I know this will work, but it can be a bit tedious.
2.  just move the files to the new directory strucutre, and let PSE find them using "reconnect."  not sure how automated this will be or if i will have to "browse and find" each file.  i've never been too impressed with "reconnect"
thoughts?

First of all my entire post is sequitur, it's just not sequitur to you.
Second, malware usually attaches itself to Windows or browser files, not to some Jpeg laying in a remote corner of a "volume" drive. Of what exact "good" or use would it be to the originator? Why would you place malware in a file that stands a chance of not being opened at all?  Given that there are are great number of multi-user computers in the field, the care the OP has taken to avoid malware is of little relevance to the possibility of an actual infection.
Malware writers have gotten more sophisticated, as have the scanners. However, what is getting through seems to be be harder to identify and eradicate.
In the case of guarding my personal information, I am zealous to the point of not being willing to take chances, and would rather reformat in the event of trouble, instead of a long running post and repost, scan and rescan, install and uninstall various malware scanners, meanwhile relying on ther kindness of others to bail yourself out of an infection. Reformat, and my photos are a still right where they where on "G:/" (on  >>>four <<<) computers.
As an aside note, the biggest uptick in exploits and infections is from the "friendship meat markets" such as "Face Book", where all the imbeciles congregate to take "online IQ tests", thus giving out all their personal information. As you can likely tell, I am not all all suited to that environment, and have had my IQ tested in manners professional.
You are simply overtly and patently incorrect about all the, "I lost my photos because PSE stopped working" being "pilot error" in file management. Simply go to the PSA forum, you'll see what  mean. Or, read this post, from this forum.
Re: out of memory error adobe elements 3.0
Hi, just wondering if you had any success in retreiving or opening your Organizer?? Im having the same problem and i have tried everything, i even rang Adobe and they told me there were no technitions able to help because Adobe Photoshop Elements 3.0 was too old. If anyone has a solution please let me know, i have 5 years worth of photos in this software, i just want to be able to open the organizer to burn all my pics to CD then i will update my software. PLEASE HELP!!!!!!!!
IMHO, it would be more productive to assist a member who desires to have knowledge and control over their photos location in the Windows environment, and also permit a harmonius integration with PSE's file management, rather than simply continuing to spout Adobe dogma. Given the POS that PSE-8 (organizer) is stacking up to be, it may be time to seek out another file manager anyway, at which point you had better know exactly where (in Windows) your photos are and be able to manage them from there.
If I were going to go through the agonizing, (to me), process of recognizing a deity, it certainly wouldn't be "The Adobe Software Corporation". And hell would freeze over before I knelt at PSE's altar.

Similar Messages

  • File and directory names with Danish characters

    I have installed the Novell Client v2.0 for Linux on my Open Suse 10.3. The Client is connecting to my Netware servers (6.0 & 6.5) without any problems...
    There is one problem... Filenames and directory names with the Danish , & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as b. and when clicking the file the file disappears from the file list. It seems to be the same problem with the German (umlaub).
    What to do?
    /Michael

    Originally Posted by J.H.M. Dassen (Ray)
    mimo <[email protected]> wrote:
    > There is one problem... Filenames and directory names with the Danish ,
    > & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as
    > b. and when clicking the file the file disappears from the file list. It
    > seems to be the same problem with the German (umlaub). What to do?
    As far as I know, the Novell Client for Linux expects that file and
    directory names use the UTF-8 encoding and does not support a traditional
    8-bit encoding like ISO 8859-1. Try changing the encoding of file and
    directory names to UTF-8 as described in
    SDB:Converting Files or File Names to UTF-8 Encoding - openSUSE
    HTH,
    Ray Dassen
    Technical Support Engineer, EMEA Services Center, Novell Technical Services
    Novell, Inc. Software for the Open Enterprise Software for the Open Enterprise
    Seems a good hint. When I create a folder or file from within SUSE using an "Umlaut" everything is OK and NCL 2.0 displays them correctly as they are UTF-8 formatted.
    The proposed tool is no solution: one cannot convert folders or files that one cannot see (does it work for folders at all?). Maybe a windows tool would work because one could search for all files or folders with "Umlaute" and convert them. Other options?

  • File and Directory Maintenance on OSX Server

    Are there any special considerations for using file and directory maintenance utilities such as Disk Warrior or TechTool, etc. when dealing with OSX Server, or can it be handled just like any other volume.
    We have all of our data and our user home directories on the server and I would like to run some miantenance on them.
    Thanks.

    I am no expert on disk utilities.
    Personally, I just have a separate 5G partition with a minimal OSX which I boot from once a month (or before a server update) and run Disk Repair & Repair Permissions from.
    As far as I know, there is nothing going on on the server that is not going on on a 'normal' OSX machine (at file level mode). The OSX unix offering is miles from the previous OS9 model where the likes of Norton was almost mandatory. The built-in 'periodic' scripts and disk utility 'repair' (see "man fsck" in Terminal) all run at unix level, and have done for years, even before Apple II days!
    Although I have both Disk Warrior & TechTool, I don't use them except in an 'emergency' (otherwise called: "try anything").
    I would be interested in any other comments though.
    -david

  • File and directory permissions

    We are running OSX 10.7 Lion on a Mac Pro 1,1 IN RAID. We are using this system als fileserver. Since last year it came to our attention that there where problems with the permissions on the files and directories (they seem corrupted). I do not mean system files but the files we stored on this server. When I look at random file permissions I get a whole list of users etc. A lot of duplicate users are there and also there are some entries in the list saying 'fetching'.
    We use the server admin tool to manage groups and users.
    This is what we have done so far:
    - Try to repair permissions through terminal (because of RAID configuration)
    - Propogate permissions through server app
    - Resetpassword trick (restart cmd+R / terminal / resetpassword)
    Can anyone tell me how to get this working 'clean' again? is there a way to reset all files according to the workgroup/user settings in the server app?

    Sounds a bit like the temp files are not being 'closed' after being written
    to or read by Labview. If you are using the advanced file vi's make sure
    that they are closed afterwards.
    If the OS assumes they are open then it will not allow deletion etc even
    outside of Labview.
    bubucis wrote in message <7kv2kl$3flk$[email protected]>...
    >Hello!
    >
    >Does anybody know how Labview deals with file and directory permission
    >locking under WinNT.
    >I have a following problem. There is a main VI running in a state machine
    >mode and it fires up a SubVI that has a bunch of SubVIs. One of these
    >SubVIs are creating a temporary directory and files that I want to delete
    >once everything is over. However I always get a file permission error when
    >trying to delete those f
    iles, also when using Explorer and trying to delete
    >those files I get a file sharing error. This happens even when main VI has
    >been stopped. How comes LabVIEW does not unlock that file and directory.
    >Rather annoying!
    >Thanks for you help.
    >
    >Reinis Kanders
    >
    >

  • Script for moving files and directory to archive

    Hi,
    I've search the web for good working script to archive my files and folder with no luck.
    do you have a script that move and preserve the structure of older files and folders that have not been accessed for X days?

    Hello, I found this quite quickly in the TechNet Gallery. It seems like it would do what you're looking to do.
    https://gallery.technet.microsoft.com/Archive-old-files-with-042f859a
    # Powershell script - move old files to an archive location.
    # Writes log files to $logpath
    # Ver 0.6
    $path = "C:\TEMP"
    $archpath = "D:\TEMP-ARCH"
    $days = "30"
    $logpath = "C:\Temp"
    $date = Get-Date -format yyyyMMddHHmm
    write-progress -activity "Archiving Data" -status "Progress:"
    If ( -not (Test-Path $archpath)) {ni $archpath -type directory}
    Get-Childitem -Path $path -recurse| Where-Object {$_.LastWriteTime -lt (get-date).AddDays(-$days)} |
    ForEach { $filename = $_.fullname
    try { Move-Item $_.FullName -destination $archpath -force -ErrorAction:SilentlyContinue
    "Successfully moved $filename to $archpath" | add-content $logpath\log-$date.txt }
    catch { "Error moving $filename: $_ " | add-content $logpath\log-$date.txt }

  • Reading files and directory from a directory

    ublic static void readFromDirectory(String dirName) {
              // stop word ArrayLists
              ArabicStop();
              EnglishStop();
              FrenchStop();
              SpanishStop();
              DutchStop();
              File dir = new File(dirName);
              if (dir.isDirectory()) {
                   String[] child = dir.list();
                   System.out.println("hi Iam here");
                   for (int i = 0; i < child.length; i++) {
                        readFromDirectory(child.toString());
              File[] files = dir.listFiles();
              if (files == null) {
                   System.out.println("There are no files in this Directory ");
              } else {
                   for (int j = 0; j < files.length; j++) {
                        String filename = files[j].toString();
                        readFile(filename);
                   if (dirName.equalsIgnoreCase("English")
                             || dirName.equalsIgnoreCase("Nonenglish")) {
                        for (int i = 0; i < a2.size(); i++) {
                             keyWord = a2.get(i).toString();
                             //System.out.println("===" + keyWord + "===" + "KeyWord");
                             for (int a = 0; a < text.size(); a++) {
                                  String t1 = text.get(a).toString();
                                  if (keyWord.equalsIgnoreCase(t1)) {
                                       count++;
                                       //System.out.println("Found at:" + files[j] + " file");
                             keyWCount = count;
                             m1.put(keyWord, keyWCount);
                             //System.out.println(m1.get(keyWord));
                             count = 0;
                   } else if (dirName.equalsIgnoreCase("Spanish")) {
                        for (int i = 0; i < a5.size(); i++) {
                             keyWord = a5.get(i).toString();
                             //System.out.println("===" + keyWord + "===" + "KeyWord");
                             for (int a = 0; a < text.size(); a++) {
                                  String t1 = text.get(a).toString();
                                  if (keyWord.equalsIgnoreCase(t1)) {
                                       count++;
                                       //System.out.println("Found at:" + files[j] + " file");
                             keyWCount = count;
                             m1.put(keyWord, keyWCount);
                             //System.out.println(m1.get(keyWord));
                             count = 0;
                        //System.out.println(m1);
                   } else if (dirName.equalsIgnoreCase("French")) {
                        for (int i = 0; i < a3.size(); i++) {
                             keyWord = a3.get(i).toString();
                             //System.out.println("===" + keyWord + "===" + "KeyWord");
                             for (int a = 0; a < text.size(); a++) {
                                  String t1 = text.get(a).toString();
                                  if (keyWord.equalsIgnoreCase(t1)) {
                                       count++;
                                       //System.out.println("Found at:" + files[j] + " file");
                             keyWCount = count;
                             m1.put(keyWord, keyWCount);
                             //System.out.println(m1.get(keyWord));
                             count = 0;
         public static void main(String[] args) {
              int countText = 0;
              int c;
              test t1 = new test();
              System.out.println("IN NON - ENGLISH DOCUMENTS - P :");
              t1.readFromDirectory("NonEnglish");
              for (int j = 0; j < text.size(); j++) {
                   if (!text.get(j).toString().equalsIgnoreCase("")) {
                        countText++;
              c = countText;
              //System.out.println(c);
              //System.out.println(text.size());
              for (int i = 0; i < a2.size(); i++) {
                   String word = a2.get(i).toString();
                   String m = (m1.get(word)).toString();
                   double x = Double.parseDouble(m);
                   System.out.println(word + ":" + (x / c) * 100 + " %");
    I wanna read text files from directory that contain - lots of other directorys... and by using this code I have error,,,
    Can anyone help me plzzz
    Edited by: Shamma on Oct 9, 2008 3:32 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    You actually have more than 1 problem: you cannot traverse directories recursively and you get a NullPointerException.
    For the first problem you might want to verify what this statement returns:
    child.toString() (I honestly don't understand why you are calling toString() on a String object, but that's not the real problem!)
    You probably expect it to be a full absolute path.
    The NullPointerException has already been pointed out by masijade.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Both file and directory path selection

    Hi,
    Is it possible to select both file path and directory path from one parameter using F4?If yes how?
    Thanks.
    Edited by: Ginger on Oct 5, 2009 7:51 AM

    >
    Ginger wrote:
    > No...file can be anywhere....file path selection means will have file name(c:\abc.txt) and directory selection means only select 'C:\'
    > from which files can be selected.
    >
    > Now I want to enable both the options in one parameter path.Is it possible?
    AFAIK, it is not possible.
    But you can try a workaround though :-P
    Make two radio-buttons:
    1. Select File (rb_file)
    2. Select Directory (rb_dir)
    Then based on the radio-button call the respective method
    IF RB_FILE = 'X'.
    Call Method CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    ELSEIF RB_DIR = 'X'.
    Call Method CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
    ENDIF.
    BR,
    Suhas

  • FIle and directory selection

    How can u select both file and directories in a single dialog box if you are using SWT
    i know for the individual ones you use
    DirectoryDialog
    FileDialog
    but dont know which one combines then???

                   JFileChooser jfc = new JFileChooser();
                        jfc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
                        jfc.showOpenDialog(new JFrame());

  • Dynamic File and Directory Name without Mapping

    Hello Experts,
    We have following requirement:
    1) Files will be picked from R/3 AL11 directory and would be placed in corresponding folder in target system.
    2) On source side ,there would be only one folder for all types of files(around 20),but on target side,there would be one folder for each kind of file(20 folders)
    3) File name should be same on the target side but target directory should be selected based on file name.
    I have gone through a number of posts related to similar requirements and hence,sorry for a new post but I am not yet able to find a solution to this.
    I could understand,this can be achieved using DynamicConfiguration UDF .
    But I have no possibility to have mapping in my scenario.It would just be a pass through scenario.
    Can anyone please suggest a solution to this?
    Thanks.
    Regards,
    Shweta

    Hello,
    Thanks a lot for suggesting solution to this problem.
    I could achieve this using following Java mapping:
    import com.sap.aii.mapping.api.*;
    import java.io.*;
    import java.text.*;
    import java.util.*;
    public class GetDynamicConfiguration implements StreamTransformation {
        private Map param;
        public void setParameter(Map map1) {
            this.param = map1;
        public void execute(InputStream inputstream, OutputStream outputstream) throws StreamTransformationException {
            try {
                   AbstractTrace  trace = null;
                // a) Set ouput File name
                String directory=null;
                   trace = (AbstractTrace)param.get(StreamTransformationConstants.MAPPING_TRACE );
                param.put(DynamicConfigurationKey.create("http://sap.com/xi/XI/Dynamic", StreamTransformationConstants.DYNAMIC_CONFIGURATION), "");
                DynamicConfiguration conf = (DynamicConfiguration) param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
                DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
                   DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
                String filename =conf.get(key);
                conf.put(key, filename);
                   trace.addInfo("File name is "+filename);
                if(filename.equals("in.txt"))
                directory = "/home/ftpxi/in";
                   if(filename.equals("test.txt"))
                   directory = "/home/ftpxi/in/test";
                   if(filename.equals("shweta27.txt"))
                   directory = "/home/ftpxi/in/test";
                   trace.addInfo("Directory name is "+directory);
                   conf.put(key1, directory);
                // b) Just copy input file to output file
                byte[] b = new byte[inputstream.available()];
                inputstream.read(b);
                outputstream.write(b);
            } catch (Exception exception) {
                exception.printStackTrace();
    Thanks again.
    Regards,
    Shweta

  • Standby Redo Log Files and Directory Structure in Standby Site

    Hi Guru's
    I just want to confirm, i know that if the Directory structure is different i need to mention these 2 parameter in pfile
    on primary site:
    DB_CONVERT_DATAFILE='standby','primary'
    LOG_CONVERT_DATAFILE='standby','primary'
    On secondary Site:
    DB_CONVERT_DATAFILE='primary','standby'
    LOG_CONVERT_DATAFILE='primary','standby'
    But i want to confirm this wheather i need to issue the complete path of the directory in both the above paramtere:
    like:
    DB_CONVERT_DATAFILE='/u01/oracle/app/oracle/oradata/standby','/u01/oracle/app/oracle/oradata/primary'
    LOG_CONVERT_DATAFILE='/u01/oracle/app/oracle/oradata/standby','/u01/oracle/app/oracle/oradata/primary'
    Second Confusion:-
    After transferring Redo Standby log files created on primary and taken to standby on the above mentioned directory structure and after restoring the backup of primary db alongwith the standby control file will not impact the physical standby redo log placed on the above mentioned location.
    Thanks in advance for your help

    Hello,
    Regarding your 1st question, you need to provide the complete path and not just the directory name.
    On the standby:
    db_file_name_convert='<Full path of the datafiles on primary server>','<full path of the datafiles to be stored on the standby server>';
    log_file_name_convert='<Full path of the redo logfiles on primary server>','<full path of the redo logfiles on the standby server>';
    Second Confusion:-
    After transferring Redo Standby log files created on primary and taken to standby on the above mentioned directory structure and after restoring the backup of primary db alongwith the standby control file will not impact the physical standby redo log placed on the above mentioned location.
    How are you creating the standby database ? Using RMAN duplicate or through the restore/recovery options ?
    You can create the standby redo logs later.
    Regards,
    Shivananda

  • Please help on create files and directories in Session Bean

    Hi,
    I am trying to create files and directories at run time from a session bean. Since EJB 2.0 prohibit the use of the java.io.* package. The only thing that I know how is to use the URLConnection. After getting a connection through URL. I may use the getOutputStream() to get a output stream to write to the HTTP server. But the getOutputStream() returns an OutputStream object which is one of the package in the java.io package. Since I need to create file and directory, I need to use the FileOutputStream that is also under the java.io package.
    Can someone give me a hint what should I do. Here is a directory and the file that I may need to create;
    Directory1/Drictory2/myFiles.au
    Thank you in advance, your help is greatly appreciated.

    From 24.1.2 (Programming Restrictions) of the EJB 2.0 spec:
    � An enterprise bean must not use the java.io package to attempt to access files and directories in the file system.
    The file system APIs are not well-suited for business components to access data. Business components should use a resource manager API, such as JDBC, to store data.
    You might want to look at the File System Service Provider in JNDI for an alternative approach. I have never used an FSSP though.

  • Files and Directories with *'s

    I have a problem where I moved files and folders from a 10.4.8 G4 server on to a new 10.4.8 G5 Server with XSAN 1.4. Some of these files and folders are part numbers and have *'s in the names. Any directory or file with a * in the name appears normally on the local file system. Over AFP and SMB these files and directory names get clobbered and end up looking like 6 characters ~ and one character, or something like ADQEOI~F. Has anyone ever seen this behavior before? I'd love to just rename all of the files and folders but I'm sure my users will not approve. Any suggestions would be appreciated.

    You probably should rename the files.
    A * is specifically not allowed in a file name. What's happening is that the file is stored with the unicode representation of the character. Unicode-aware apps like the Finder can deal with this but most other apps (including the file sharing daemons) cannot and that's why you see the unusual file names.
    You're going to run into all kinds of other problems, too. Renaming your files i the best bet.

  • TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

    Brand new Mac Book Pro
    Purchased in Mexico's Department store Liverpool on June 20th 2012
    Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
    Upgraded memory from 4Gb to 8Gb on June 28th.
    Tried to write on my external HD (previously written on a windows based PC) with no success.
    Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
    Then formatted my external HD and copied back all my information to it.
    deleted all the  information from my MacBook Pro HD.
    Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
    Looked in the trash bin and there it was, all the information previously deleted..
    Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
    Could not get enough space released, after several attpempts the trash bin was finally emptied.
    All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
    Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
    "Perform a Safe Boot
    Simply performing the Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
    see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    The following is the script that appears on the screen upon safe boot. and halt after the last line.
    AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
    calling mpo_policy_init for TMSafetyNet
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Sandbox
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    calling mpo_policy_init for Quarantine
    Security policy loaded: Quarantine Policy (Quarantine)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
            The Regents of the University of California. All Rights Reserved.
    MAC Framework Succesfully initializad
    using 16384 buffer headers and 10240 cluster IO buffer headers
    IOAPIC: Version 0x20 Vextors 64:87
    ACPI: System State [SO S3 S4 S5] (S3)
    PFM64 (36cpu) 0xf10000000, 0xf0000000
    Aplconsole relocated to 0xf1000000
    PCI configuration changed (bridge=16 device=4 cardbus=0)
    [ PCI configuration end, bridges 12 devices 16 ]
    Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
    Pthread support ABORTS when sync kernel primitives misused
    com.apple.AppleFSCompressionTypeZlib kmod start
    com.apple.AppleFSCompressionTypeDataless kmod start
    com.apple.AppleFSCompressionTypeZlib load succeeded
    com.apple.AppleFSCompressionTypeDateless load succeeded
    AppleIntelCPUPowerManagementClient: ready
    BTCOEXIST off
    wl0: Broadcom BCM4331 802.11 Wireless controller
    5.100.98.75
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
    rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
    Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
    storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
    BSD root: disk0s2, major 14, minor 2
    Kernel is LP64
    com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
    com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
    Running fsck on the boot volume...
    ** /dev/rdisk0s2 (NO WRITE)
    ** Root file system
       Executing FSCK_HFS (version diskdev_cmds-540.1~25).
    BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
    launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
    launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
    Any help or suggestions on what to do next would be welcomed.
    I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
    Best regards
    Sergio Ramos

    Reinstalling MacOS does NOT fix the problem for me.  I'm still searching a solution !
    Bernard

  • TS2570 On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

    On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

    Reinstalling MacOS does NOT fix the problem for me.  I'm still searching a solution !
    Bernard

  • Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    Hi Gurus,
    I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
    OS: OEL5 32 bit
    oifcfg iflist
    eth0 192.168.2.0
    eth1 10.0.0.0
    oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth1 10.1.1.0 global cluster_interconnect
    eth0 192.168.2.0 global public
    cat /etc/hosts
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    My questions are:
    should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
    if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
    Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
    Edited by: ayyappa on Aug 20, 2009 10:13 AM
    Edited by: ayyappa on Aug 20, 2009 10:14 AM
    Edited by: ayyappa on Aug 20, 2009 10:15 AM

    a step forward towards resolution but i need some help from the gurus.
    root# cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    root# /u01/app/oracle/product/crs/bin/oifcfg iflist
    eth1 10.0.0.0
    eth0 192.168.2.0
    root# /u01/app/oracle/product/crs/bin/oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth0 191.168.2.0 global public
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    ****ORACLE_HOME environment variable not set!
    ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
    root# export ORACLE_BASE=/u01/app/oracle
    root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
    root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
    root# export PATH=$PATH:$ORACLE_HOME/bin
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP does not exist.
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
    VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
    Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
    My questions to the gurus are as follows:
    Should ping on vip work? It does not work now.
    srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
    VIP is not running on node: sunny1pub
    GSD is not running on node: sunny1pub
    PRKO-2016 : Error in checking condition of listener on node: sunny1pub
    ONS daemon is not running on node: sunny1pub
    [root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
    Name Type Target State Host
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Maybe you are looking for

  • Removed Process chain frm schedule by mistake

    Hi Team, just to check , i went in to the planing view of the PC & removed 1 of the sub chains from the schedule. then I do shift f1 (that show current status for all chains in meta chain) .I see that subchain in grey color , in fact it shld hav been

  • HT5824 how do I upload pictures to icloud

    Can anyone tell me how I can upload pictures from my computer to icloud so I can back them up. Any help apreciated, thanks

  • Button targeting main timeline

    I have a button inside of a movieclip inside of a movieclip on the main stage. I want the button to gotoAndStop in the main (root) timeline on frame 21. I can't figure out the correct code for this, this is one of the things I've tried: on (release)

  • Downgrade ARD client software from 3.4 to 2.2?

    Hi, I'm running Apple Remote Desktop 2.2, however the Mac Pros (running 10.5.8) which I want to control have ARD Client 3.4 installed. Is there any way to downgrade the client software so I can use ARD 2.2? At the moment, when I try to, for example,

  • Mass changes? Where are is the scripts stored?

    So I want to make a mass changes to 300 business rules all at once to the calc script part. How do I do this and where is the data stored in terms of script data or pre csv.