File and Folder Security Issue

Hi,
I'm facing some problem in my windows server 2012 r2. Problem is, when i set a users permission to modify a folder and it's content then that user can delete this folder and it's content. But I want user can write, edit a file (like .doc or .xls) but he
cannot delete this file. Is it possible?
Regards,
Mahfuz

Hi,I have been facing the same problem.
The security measures which were already mentioned here will not gonna work for MS office
file extension because without providing modify permission,its not possible to edit them as this protection is working on this way "edit=delete+create".
So without providing delete option,is there any other way out to manage the staffs?Please let me know.
Thanks,
Ashief Ahmed

Similar Messages

TS4153 few files and folder are not deleting from trash folder

i am trying to delete all files and folders from the trash folder by clicking empty securely, but its not deleteing the files anf folder. please suggest how to clean the trash folder by deleteing all the deleted files and folder.

Securely deleting items in Trash writes Zeros over the data so that it is completely eradicated.
This will take quit a long time depending on how much data you have in Trash.
Unless there is data that needs to be rendered unrecoverable in the Trash, you could choose to just delete the files and folders with out the secure option.
Once you have Emptied the Trash unsecurely you can always use disk utility to Securely Erase Free Space on the Drive.

File and folder permissions for Adobe Photoshop CS5

Good day,
I am an IT specialist and I work for a Canadian governement agency and we are having an issue with Photoshop CS5. After successfully installing Photoshop CS5 from the Adobe Creative Suite 5 Design Premium set(using a local machine administrator account), Photoshop crashes immidiatly after launching it(even with the local administrator account). The exact error message is as follows:
The instruction at "0x230dad8dc" referenced memory at "0x00000000". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
I know this is an environement issue and not an application or hardware issue since I was able to successfully install and run Adobe Photoshop CS5 on a plain vanilla install of Windows SP3 XP on the same model of workstation(HP DC7800). This later also confirms it is not a RAM or video adapter issue either. My experience tells me it would be more related to file/folder permissions on the workstation(although I'm open to other suggestions). Because we are a governement agency, our workstations have machine and user policies and desktop configurations that get applied to the workstations automatically upon joining our domain via GPOs and SMS. Certain system files and folder permissions may be locked down for security reasons therefor I was wondering is someone has a list of files and folders that Adobe CS5 needs access to upon startup in order to properly function?
If anyone would like more details or information please let me know and I'll try to be more specific.
Thanks in advance to all who take the time to read and help out!

I appreciate that you're trying to surmise what's different, and it's good that you have had success with similar/identical hardware. At least you know it can work.
However, I wouldn't bet just yet that it's a permissions issue. I'd think you should get a specific error if a locked-down file needed to be accessed, not a null pointer crash. The Photoshop installer should be setting up the proper permissions on its own files for it to run.
Is it exactly the same video card as the other computer, on which Photoshop works?
Are you sure the video drivers are up to date with the same version as on the other computer?
At exactly what point during startup does the failure occur (i.e., is the splash screen showing, and what does the status line in the splash screen say it's doing)?
-Noel

Report folder security issue

Hi,
We are struggling with this issue, I have various report folders in Explore within Workspace. I would like my users to view (and run) reports in the folders for which permissions have been granted. Even after granting permissions, my users are able to view all report folders and also able to run reports from them.
How do we restrict users to view only relevant folders for which permissions have been granted for. My users are grouped in various groups and folder security is being given to these groups. All my reports are FR and some WA reports.
Am I missing something silly completely? Any guidance will be of great help. Thanks in advance.

Two things i have run into:
1) the group WORLD has access to the folders. You need to remove this group from each folder.
2) The users have admin rights for Reporting. This overrides folder security.

Prevent using special characters in file and folder names?

I've recently begun adding windows clients to my network. In doing so, I've found that on my file shares from OS X server, the windows clients are unable to see files and folders which have names containing special characters such as / ? < > \ : * | ”
Unfortunately my accounting department has been creating files with these characters in their names for several years. I would like to find if there is a way to prevent them from using a defined set of characters in the file and folder names to prevent them from "accidentally" doing so in the future.
I've found that by turning off streams support on SMB in OS X server, that my windows clients can at least see that a file or folder should exist, albeit with a corrupted file name. Removing the special characters from these names allows the proper name to become visible and the file accessible.
Any info would be greatly appreciated.

(_seb_) wrote:
> Gary White wrote:
>> On Sun, 19 Nov 2006 19:15:04 +0100, "(_seb_)"
<[email protected]> wrote:
>>
>>> "ça alors: it's a déjà-vu"
>>>
>>> How can I encode this so it's valid as a
directory name, yet can be
>>> displayed as intended when the name is output to
the page.
>>> urlencode() does not do the job, neither does
htmlentities()...
>>
>>
>> What's wrong with:
>>
>> $l="ça alors: it's a déjà-vu";
>> print urlencode($l)."<br>\n";
>> print htmlspecialchars($l);
>>
>> Gary
>
>
> I know that, but what is the name of the directory? It
has to be a real
> directory name, not a string stored somewhere.
>
> What's a valid encoding for a directory named "ça
alors: it's a
> déjà-vu"? I can call a folder like this on my
Mac, but it won't work on
> any server...
>
>
>
PS: basically it's not a url encoding issue.
I can url encode "ça alors: it's a déjà-vu",
and pass it in a url query string. But my issue is not
with an url query string, it's with an actual URL, that is,
the actual name of the directory. It
can't be "ça alors: it's a déjà-vu". But I
want to allow the user to name their directory like that
if they want. So I need a way to encode this into characters
that can be used for an actual
directory on the server.
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Word and Excel file and folder icons missing in File Open dialog box

Running office 365 on Windows 7 Pro: In Word and Excel, when opening and browsing for files in the file Open dialog box, all file and folder icons are missing. This problem does not occur within Windows Explorer.

Can you open Word/Excel files normally?
Go to File>Advanced>Disable hardware graphics acceleration
Start Office in safe mode to troubleshoot the issue:
http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
If the issue persists, do a repair for your Office suites in Control panel>Program and features>Office>Change>Repair
Tylor Wang
TechNet Community Support

Use Automator to move files and folder structure to another folder, retaining destination contents

I have been struggling trying to setup Automator to move files and folder structure to another folder, retaining the destination contents. Basically, I need to add files at the destination, within the same folder structure that exists at the source. Here's some details about the scenario:
-I have PDF files that I create on a seperate computer than I my daily use machine
-For security reasons, the source computer doesn't have access to any shares on the destination computer
-The destination computer has access to shares on the source computer
-I want to delete the original PDFs at the source after they are moved or copied
I haven't been able to get Automator to move or copy the folder contents (files and subfolders) without dropping everything copied at the top level of the destination, resulting in many duplicate folders and a broken folder structure.
So far I've only had luck getting this to work at the command line, but I'd really like to have this setup in Automator so that I could have either a service or application that I could use for any folder, prompting for the source and destination folders. I'm a relatively new Mac user with limited Linux experience, so this is the command that I've cobbled together and currently accomplishes what I'm looking for:
ditto /Volumes/SMB_Temp/SOURCE ~/Desktop/Documents/DESTINATION
cd /Volumes/SMB_Temp/SOURCE
find . -type f -name "*.pdf" -exec rm -f {} \;
Thanks for any ideas!

If you have a command-line syntax that works, why not just create an Automator workflow with a single 'Utilities -> Run Shell Script' action, where that action has your (working) shell commands?
Seems way, way simpler to me than trying to reinvent the wheel and transcribe shell commands into individual Automator actions

Windows server 2008r2 files and folder auditing.

Hi ,I want to Monitor files and folder with auditing in 2008r2 like write,read,delete etc..
Can you please help me on that.
Thanks in advance for your support.
Thanks,
Bhautik Shah

Hello,
this must be enabled on the folder you like to monitor. Steps in the following thread from the same question are still valid:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
After you've done both of these steps, any file deletions will show up in the Security log of the file server that hosts those files.
HTH
http://technet.microsoft.com/en-us/library/dd772690%28WS.10%29.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to restore file and folder labels

Apple does it again. File and folder lables gone and little colored dots take their place. Apple at least give users the choice. That's choice, spelled C-H-O-I-C-E!!!

http://www.trankynam.com/xtrafinder/
Hopefully that may work on your Mac. NOW, This is a Design/Ease of Use as well as a Efficiency/Workflow issue. I am using an IMac, c 2012 recently upgraded from 10.8.6 to the current version of Mavericks. Please restore Finder labels. Give us a CHOICE. All your young eyes don't see things the way us folks who are 60-something do. I have been using a Mac for 20 years. You removed colored folders before & restored before. Do it AGAIN. This is terrible. & ALSO, why does TextEdit print SO LARGE? It used to reduce the doc to try to fit it in on the paper. Now it makes the same documents PAGES LONG. I can't seem to make it work as before. For God's sake, bring back colored folders. Its not just me. I have time to complain. EVERYBODY I know hates the little colored dots. They do not serve the same purpose as Tags. Even the major professors at FIT NYC, the college I am an adjunct at, for the last 30 years. Why, for the FIRST time in my 18 year relationship to Macs, do I feel compelled to use plug in??? Is that the only way to get my colored folders again??? I hate the way the screen slips to the side also, and windows maximize with the slip of the mouse, also. Get it together Apple!

Does simple file and folder sharing on an iMac work with OSX Server?

Hi There
I wonder if I should install OSX Server on an iMac wher several users work on the same files and folders.
My question - before I do something I might regret:
Does simple file and folder sharing on an iMac within several users really work with the help of OSX Server?
All I want to be able to do:
Admin creates a new folder1 and gives it read- and write access for user1 and user2.
User1 creates a subfolder1 in folder1, and a document1 in subfolder1.
User2 edits document1. Later Admin edits document1.
All these simple editing of files and folders (and subfolders) within a main folder should be possible. This is not possible now.
Is everything clear? I'm not a network specialist or something, I just want to give some co-workers access to some data on my computer without problems.

So what you need are recursive permissions.
I suggest you create a group and add user1 and user2 to that group. You can name that group whatever you want, but for now i will call it FSUsers
Execute this in terminal. Replace FSUsers with your new group
sudo chmod -R +a "FSUsers allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,readsecurity,file_inherit,directory_inherit" /Users/Shared/*
Replace /Users/Shared with the location of your shared folder. Make sure you keep the /* at the end (this allows all subfolders and files to get the same permissions.
If you need to add people to the share just add them to the FSUsers group, the FSUsers group should should also be allowed in the sharing preferences.

Hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

Here you can contact the developer.
(Notice, I'm posting this line only once. Not 4 times. )

I have a folder and 3 files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked?

I have an empty folder and 3 .jpg files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked and I have full read & write access. Grateful for any assistance in solving this problem.

Back up all data.
Triple-click anywhere in the line below to select it:
ls -@Oaen De* | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Help, I deleted some files and then secure empty trashed it.

I accidently deleted important files, and also secure empty trash, is there any way to recover those files?

no, unless you have a backup.

Mac CAN't Cut files and folder???

i'm new Mac user!
My Mac CAN't Cut files and folder! is it normal? just copy, then delete orig.
or use drag with OPT key. But i can't use CMD+X or CUT in EDIT menu.

I have been having the same problem, and thought it was just me. Had the same problem with deleting files/folders in Finder...till I found you have to hold the cmd key down while deleting.
Was hoping there was a keyboard shortcut for copy as well.
Really infuriating, what would be a CMD-X, move mouse, CMD-V operation becomes a copy, navigate to new folder/move to new window, paste, go back to other window, re select and delete operation.
My work around is to use Windows Explorer in unity mode in VMWareFusion if I am doing any major search/move/cut operations.
Saves having to have multiple windows open/going back/forwards, between them.
I did see a terminal hack that enabled the CMD-X keyboard shortcut....but it just deletes to the Trash Bin and does not actually paste the items back.
Can understand the reasons nerowolfe states, but that does not stop it from being b**y annoying

QTSS file and folder permissions

I am having a lot of problems getting QTSS and QTSS Publisher working correctly. I think this may be due to file and folder permissions. Does anyone know what the correct ownership and access settings should be for the folders containing my quicktime files?
Thanks.

Try setting the ownership and permissions of those files to the ones mentioned on the end of this page, which are: owner: qtss, group: admin, permissions for owner and group: Read & Write, and Read only for others.
(13414)

File and Folder Security Issue

Similar Messages

Maybe you are looking for