File and Transaction Parity in PI 7.1

Hello,
We are currently designing our file and transaction Parity architechture for SAP PI 7.1. Could you please let me know where can I start on it. Does PI offers any out of the box parity services and any kind on documentation on it.
Thank you.

The procedure is the same as it was in SAP PI7.0 or lower versions.....no major change on this front.
Search SDN for documents related to your protocol.
Regards,
Abhishek.

Similar Messages

Timeouts increased after we moved USR, SAP data files and TLogs to new SAN

We are having issues with timeouts after we moved our USR, SAP SQL Datafiles and SAP Transaction Logs from our old SAN to a new SAN.
Timeouts for SAPGUI users are set to 10 minutes.
We are running Windows Server 2003 with SQL Server 2005.
The SAP database has 8 datafiles with a total size of about 350GB.
Procedure we used to move SAP to new SAN:
1. Attached 3 new SAN Volumes
     -a. USR
     -b. Data Files
     -c. Transaction Logs
2. Shutdown SAP and SQL services
3. Alligned the new volumes with a 1024kb offset and gave the Data files and Transaction log volumes a 64kb allocation
    size. (The alignment and 64kb allocation size were not setup for these volumes on the old SAN)
4. Copied the 3 volumes from old to new.
5. Changed the new volumes drive letter to the drive letters of the old volumes.
     -a. I had to restart in order to change the USR volume.
     -b. Because of this I had to resetup the sapmnt and saploc shares.
6. Started SQL services and then SAP services and everything came up just fine.
The week before we had anywhere from 1 to 9 timeouts per day.
This week: Monday had 20 and Tuesday had 26.
On Monday we saw that MD07 was the only transaction that was timing out, but Tuesday had others as well.
The amount of users in the system is about the same. The amount of orders going in are about the same. No big transports went in right before we switched.
Performance counters that I know about for disk look a lot better on the Data Files.
- PAGEIOLATCH_SH ms/request is about 50% better
- Under I/O Performance in DBACOCKPIT:
- MS/OP is now anywhere from 5 to 30 - Old SAN: 50 to 300
- The Hit Ratio is over 99% - same as the old SAN
Looking at Wiley Introscope graphs:
- The "SAP Host: Average queue length" is about 30% to 40% lower then the old SAN.
- the "SAP Host: Disk utilization in %" is about the same.
Questions:
1. Did we do anything wrong or miss anything with our move procedure?
     a. Do we have to do anything in SQL since we changed volumes even though we kept the drive letters the same?
2. What other logs or performance counters should I be looking at?
Thank you,
Neil

Our new SAN Vendor is Compellent. They have been fantastic. I would highly recommend checking them out.
The reasons for the timeouts had nothing to do with the SAN...Well kind of anyway.
I decided to check t-code SM20 to see what users were doing when these timeouts were happening. What I found was the program R_BAPI_NETWORK_MAINTAIN was being called thousands of times in a matter of 10 to 15 minutes at random times through out the day. It would take up about 50 to 80 percent of the amount of programs being executed during these times.
So, I sent this information to our developers and they found out that R_BAPI_NETWORK_MAINTAIN was being called from another program that was looping thousands of times. The trigger to stop the loop wasn't happening fast enough. They made a change and we haven't seen the timeouts since.
I think that the performance increases allowed the loop to run faster which caused the slow downs and timeouts to happen more often.
Thank you to everyone for their help!
Neil

Downloding the SAP master data and transaction data to a flat file

Hello All,
Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
Thanks,
Feroz.

hi
as of now up to my knowledge no.

File Adapter Transactional in SOA and OSb

Hi All,
Is file adapter transactional in SOA and OSB. I have a requirement where a inbound file adapter polls for a file and it is consumed by a topic.If topic is down,how can I know that the same file will goes to topic when is up(how can I make it transactional).I want to do this both in SOA ans OSB.
Any help would be appreciated.
Thanks,
Kumar.

Hi Kumar,
File Adapter itself is NON TRANSACTIONAL...
4.2.9 Nontransactional
The Oracle File Adapter picks up a file from an inbound directory, processes the file, and sends the processed file to an output directory. However, during this process if a failover occurs in the Oracle RAC back end or in an SOA managed server, then the file is processed twice because of the nontransactional nature of Oracle File Adapter. As a result, there can be duplicate files in the output directory.
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/adptr_file.htm#BABIEBJF
Cheers,
Vlad

Possible exporting the answer file AND attachments ALSO ONLY A transaction in a directory ?

Possible exporting the answer file "Form" AND attachments ALSO ONLY A transaction in a directory ?
Est-il possible de télécharger (d'exporter) en une seule opération le fichier-réponse à un formulaire ADOBE et toutes ses pièces jointes dans un dossier et ceci en une seule opération ? Merci.

Thank you. Cepha.
De : SumitV <[email protected]<mailto:[email protected]>>
Répondre à : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date : mardi 16 décembre 2014 11:06
À : Bernard VIVIER <[email protected]<mailto:[email protected]>>
Objet : You have been mentioned by SumitV in Re: Possible exporting the answer file AND attachments ALSO ONLY A transaction in a directory ? in Adobe Community
You have been mentioned
by SumitV<https://forums.adobe.com/people/SumitV?et=notification.mention>in Re: Possible exporting the answer file AND attachments ALSO ONLY A transaction in a directory ? in Adobe Community - View SumitV's reference to you<https://forums.adobe.com/message/7018753?et=notification.mention#7018753>

Loading masterdata and transaction data from same flat file

hi all,
how can i load master data and transaction data from the same flatfile at a time.

I am afraid it is possible.
Go thru this Uploading Master & Transaction Data together from Flat File

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Current server is the coordinator and transaction is not found

Hi,
We're using Weblogic 8.1 SP3. We have a single weblogic domain and 2 clusters in it. EAR1 is deployed in cluster 1 and EAR2 is deployed in cluster 2. EAR2 is compiled and created using j2ee.jar and not weblogic.jar.
We have a MessageDrivenBean which is CMT / Required in EAR1 calls a BMT Stateless Session Bean in EAR2.
A new transaction is begun in the BMT SB method and commit or rollback is called based on exception. A RuntimeException is thrown back to the MDB in case the transaction is rolled back in Bean Managed SB.
Sometimes from the Bean Managed SB the following exception is thrown:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably rolled back and forgotten already.
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
     at com.oakgrovesystems.reactor.frontDesk.EJBFrontDeskBean_1gq9kv_EOImpl_813_WLStub.handleRequest(Unknown Source)
     at com.oakgrovesystems.reactor.requests.ReactorRequest.send(ReactorRequest.java:212)
     at com.oakgrovesystems.reactor.client.EJBReactorProxy.sendRequest(EJBReactorProxy.java:44)
     at com.oakgrovesystems.reactor.client.AbstractReactorProxy.handleRequest(AbstractReactorProxy.java:52)
     at sun.reflect.GeneratedMethodAccessor153.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at tavant.bpm.client.proxy.DynamicFailoverReactorProxy.invoke(DynamicFailoverReactorProxy.java:84)
     at $Proxy11.handleRequest(Unknown Source)
     at tavant.bpm.client.ProcessHome.handleRequest(ProcessHome.java:298)
     at tavant.bpm.client.ProcessHome.startProcess(ProcessHome.java:87)
     at tavant.bpm.client.processor.CreateWorkflowInstance.startProcess(CreateWorkflowInstance.java:70)
     at tavant.bpm.client.processor.CreateWorkflowInstance.invoke(CreateWorkflowInstance.java:51)
     at tavant.bpm.ejb.AsynchronousProcessorMessageBean.onMessage(AsynchronousProcessorMessageBean.java:58)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
This is not consistently reproducible though it happens when server is heavily loaded. When this exception occurs, the transaction in the BMT Session Bean is actually getting committed! The message gets redelivered from the MDB.
What could be the problem?
Regards
Sandhya

I'm seeing a similiar problem on our servers recently and thought I would add my problem as well. We are using Weblogic 8.1; don't know which SP is in production. We have an EAR file with an SB EJB that puts messages in a queue. The EAR is deployed in a cluster along with the queues. The errors below occurred in 3 of the 4 WLS instances in our cluster. This happened during a peak period and lasted for several seconds in Production.
###<Jul 1, 2005 11:18:12 AM EDT> <Warning> <RMI> <exsdxtxeax1x.prod.xxxx.xxx> <ems-04> <ExecuteThread: '12' for queue: 'web
logic.kernel.Default'> <<WLS Kernel>> <> <BEA-080006> <Failed to associate the transaction context with the response while marshall
ing an exception to the client:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already..
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already.
at weblogic.transaction.internal.TransactionManagerImpl.sendResponse(Ljava.lang.Object;)Ljava.lang.Object;(TransactionManag
erImpl.java:1438)
at weblogic.rmi.internal.BasicServerRef.associateTxContext(Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundRespo
nse;)V(BasicServerRef.java:490)
at weblogic.rmi.internal.BasicServerRef.postInvoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.sp
i.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Throwable;)V(Optimized Method)
at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest;)V(Optimized Method)
at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
>

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

Character # at the end of file in transaction AL11

Hi gurus,
In version 46c if I upload a file to application server with program RC1TCG3Z and in mode BIN when I display the file with transaction AL11 the file is correct.
In version 60 if I upload a file to application server with the same program and in mode BIN when I display the file with transaction AL11 appears character # at the end of some lines. How it is possible?
Thanks,

Hi,
U need to use one class. Refer below given code.
TYPES : BEGIN OF lt_record_input,
          rec(1000) TYPE c,
        END OF lt_record_input.
DATA : li_record_input TYPE TABLE OF lt_record_input .
DATA lv_cr TYPE c.
lv_cr = cl_abap_char_utilities=>cr_lf.
CONCATENATE '/opt/isv/cti_app/DOCU/INCOMING/PROCESSED/UNSUCCESSFUL/'
gv_filename INTO lv_path.
OPEN DATASET lv_path FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
DO.
    READ DATASET lv_path INTO lw_record_input-rec.
    IF sy-subrc EQ 0.
      REPLACE lv_cr IN lw_record_input-rec WITH space.
      APPEND lw_record_input TO li_record_input.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
CLOSE DATASET lv_path.
ENDIF.
Hope it help u.

SAP BPC 7.5 - Netweaver- File Upload -Transaction data along with comments

Hi,
We have a requirement to upload a file containing comments along with transaction data.
We are planning to store commnents in a Ztable from the flat file and read and post comments in the BADI
using UJC*Add_cmt.
Use a custom process chain to execute the above steps and link to a pakage.
Please let me know if there is a better process/how to doc and any code for the above.
Your early reponse is much appreciated.
Regards,
Venkata

Hi Venkata,
*MVAL function allows you to use multiple time period columns. I don't think this may help your scenario. I my opinion you may need to use two transformation files to bring the data from BW cube to BPC. BPC is an account base model, I don't think you can load the data in two columns in BW cube using one transformation file.
Thanks

Master Data and Transaction Data For DB Connect extracted Data...

Dear Experts,
I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be
used for drill down or reporting in Dashboard or InfoSpace?
3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
4. How should I approach the designing of DSO and InfoCube?
I will appreciate your inputs in this matter.
Many thanks!
Tariq Ashraf

Thanks!

Read a text file and populate table

My email addres is [email protected]
I am new to java. My project requires me to read a text file and pick some values from the text file and populate a table in MS Access. The main fields are from the TEXT. Some of the columns to be read are:
Transaction ref.
Amount
User ref.
Date
The text file is as follows:
Receiver =
FBNINGLAXXX LT : A
FST BANK OF NIGERIA PLC
LAGOS
LAGOS
NG
NIGERIA
Transaction ref. = SPLOUK01P0008888 Related ref. = 00077003
Amount = 16675750, NGN Value/Date =
Format & Validation
Version = 0205 Checked = Minimum
Netw. Appl. = FIN Passed = Minimum
Sender to Receiver Instructions
Banking Prior. = User ref. = SPLOUK01P0008888
Warning Status =
Possible Duplicate Emission
Appl/Serv = SWIFT Interface
RP & Ft = SIfrom_SWIFT
Date/Time = 01/04/03 18:53:19
Text =
:20:SPLOUK01P0008888
:28D:1/1
:30:030401
:21:00077003
:32B:NGN16675750,00
:50H:/4072010014877
SPDC FBN East Main A/C
:57D:WEMA BANK PLC
PLOT 22 TRANS-AMADI BRANCH P.H.
PORT HARCOURT.
RIVERS STATE.
:59:/0421002101818
PROJECT MASTERS NIGERIA LTD.
C101 ELIOGBOLO VILLAGE OFF
EAST-WEST ROAD RUMUOKORO PORT HAR
COURT
:70:PM PCE-TS 03 001030226
:71A:OUR
Block 5:
{MAC:9F664844}{CHK:60EF6513E579}
Message History =
*Original (Completed)

See in this case as you are dealing with Files and database. you need read the File by using the I/O Streams. if you have to select some particular values you can go Random access file.Once you have retrived values. You can go for the second part that is make a jdbc connection to database, and use simple SQL statements to populate those values into the table.
How this will give you a better picture

Flat File and IDoc

Hi,
Is it possible to read a flat file and create the sale order through IDoc. Can i do this by DOC_INBOUND_FROM_FILE without XI?? What file format should i pass??
Regards,
Kit

Hi ,
you can create Sales order through IDoc. IDOC_INPUT_ORDERS
At a high level, the IDOC processing executes in the following manner:
1.     Interpret IDOC header segments and captures organizational, customer master and purchase
               order header details. Performs user exits for each segment to process customizations to data
                 processing.
2.     Interprets item level segments and captures item level details like material information. Again,
               it performs user exits for each segment.
3.     Sums up the order data and determines the posting criterion viz. creating order with reference
                  etc.
4.     Builds up batch data communication sequence (BDC) with respect to the required screen
              sequence of posting a sales order.
5.     While building up the BDC data, system performs user exit to process customizations to BDC
                data.
6.     Calls transactions VA01 using the BDC data.
7.     If the processing fails, an appropriate workitem is generated for workflow processing.
if you give me brief i can help you out more.
if helpful REWARD points
Thank you .
Regards
Ramana

File and Transaction Parity in PI 7.1

Similar Messages

Maybe you are looking for