File - AS2 Scenario

Hello all,
we have a procject with a customer, but if we try to send an document, we get follow error back:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but appropriate report channel is missing. Missing inbound relation between AS2From: 'YYYY' and AS2To: 'XXX_XXX_XXX'., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but appropriate report channel is missing. Missing inbound relation between AS2From: 'Nov 'YYYY'' and AS2To: 'XXX_XXX_XXX'.
Have anybody a idea what we forgot ? What is the meaning for "appropriate report channel is missing" ?
Thanks

Hi Stephan,
Please see if its helps.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true]
Which version of PI and Seeburger has been used with ur case
Thanks,
Anoop

Similar Messages

Idoc to File(AS2)

Hi,
I am workingon IDOC to File(AS2) scenario.
When i execute the mapping in IR it executes succesfully and gives the data in the specified File format.
but when i test the interface, i am getting the output file in IDOC format where in it has to be in XML format in SXMB_MONI.
Kindly help me wiht his.
Regards

Hi,
The sender IDoc format is displayed in moni as output -
It shows that the conversion from IDoc to File is not done. Check the communication channelat the bot sender and receiver end.
If this is not the case then check the mapping which u have selected is the right one?
Regards,
Neethu

File-to-File/RFC scenario with reading filename

Hi,
i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
Scenario:
- A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
- The file must now go through a business process (not necessary the file, but i need the filename in the business process).
- The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
- The collected data are send via SOAP to a receiver system
- The file itself has to be stored in a directory via File-Adapter.
Here's my problem:
- Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
- Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
- How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
- Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
Thanks in advance,
ms

If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
VJ

N:1 file merging scenario in bpm

Hi friends,
Can anybody send me link of blog for file merging scenario in BPM. i hav two files and i hav to merge it into one single file. I am new to XI, plz help me.
Thanks in advance,
Shweta

Hi,
Check this blogs...
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Merging using corelation -
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Example using correlation:
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Please reward points if it helps
Thanks
Vikranth

IDoc to AS2 scenario connection issue

Hi Experts,
IDoc to AS2 scenario.
i am geeting below connection error while sending data from PI to Third Party Partner.Please help me on this issue i will appriciate you .
MP: exception caught with cause javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: java.net.SocketException: Connection reset # , SEEBURGER AS2: java.net.SocketException: Connection reset #
Thanks,
Aadi

Hi Srini,
Thanks for your reply.
after changing the timeout also i am getting same error
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: java.net.SocketException: Connection reset # , SEEBURGER AS2: java.net.SocketException: Connection reset # .
Please help me on this issue.

XI is not able to archive file in file-idoc scenario

Hello friends,
I have an issue in my file->idoc scenario. When a file is placed to XI's filesystem using FTP, it is placed under xiftpuser user. Owner of all directories in this structure wher the file is placed is xiftpuser. XI is not able to archive the file because of the permissions on the archive directory. But the problem is, permissions on this directory are 775 and xiftpuser and xipadm user are in the same group. So this should work. But it doesn't. When I change permissions to 777 everything works fine.
Do you have any idea what could be wrong?
Does it matter, that xipadm user has been added to the common group with xiftpuser "later", when XI was up a long time before? Do we need to restart j2ee to take these new permissions into account?
Thank you,
Olian
Edited by: Olian Saludew on Sep 23, 2008 11:46 AM

Hi,
If archive directory Path is d:\archive
Put a '\' after it.
e.g. "D:\archive\"
It will work.
Regards,
Akshay.

ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?

Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN

Data tuncated in file adapter scenario

Hi,
File adapter scenario - Sender systems passes a file (csv format) to PI which has one of field as 0001. This field is received at PI without the prefix 000. But, the target systems requires the data to be in the same format as the sender. How to solve this?
Thanks

Satish,
It is the behaviour of the CSV files that it trims leading zeros in the columns with numeric values, try this open the CSV file and select the column and right click it in the context menu you would find FORMAT CELLS and change the type of the column to TEXT so that whatever values you enter in that column remain as it is without truncating.
Also, the trick at following link would help
[http://www.howtogeek.com/howto/microsoft-office/how-to-import-a-csv-file-containing-a-column-with-a-leading-0-into-excel/]
Hope this resolves your issue!!
Regards,
Amit

Idoc to File Split Scenario..

HI Experts,
My scenario is Idoc to File split scenario..
Idoc will be triggered from the SAP ECC system and at the target side we need to drop two text files at the ftp directory.
so Idoc data needs to be splitted and to be dropped in two differient files in the target FTP directory..
So can any one suggest how to go ahead with the scenario..
Thanks,
--Kishore.

Hi,
In the idoc, some of the data will go to onefile and some goes to other files..
the structures of the two files are differient..
There is no condinal spliting here every idoc contents should be mapped according to the requirement and dropped as two files.. at the target end.
for ex:
Idoc
field1
fileld2
field3
field4
in the out put side
file1 should contain
field1
field3
field4
file2 should contain
field1
field2
fileld3
This is what the requirement, if you are not getting reply back with your queries..
Thanks,
--Kishore..

HTTP-FILE synchronous scenario

Hi,
I want to configure a Http to file synchronous scenario.
Message will be sent through the HTTP test tool. I have selected BestEffort as the QoS.
We do not want to use the repository objects.
Sample file say(<tag>this is a sample file</tag>) will be sent through HTTP test tool.
This file should be received by the File Receiver channel and dumped on the FTP.
In response, a file from some other folder on FTP should be sent.
How can this be achieved?
Regards,
Pratibha.

Hi Pratibha,
the standard sap help side is here very good
[Integration Processes (ccBPM)|http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm]
You need a receive step (synchronous) for for your http request. For this you need 3 abstract interfaces: 1 synchr IF, 1 async for request container, 1 async for resp container. You need to correlate with a unique number which the http sender has to send (f.e. date/time stamp)
Next may be a transformation (mapping) but not required.
Then a async send step to send the file.
The response file need to be created, the corresponding adapter should have a short poll intervall. The response file need to send the unique id as well.
The BP correlates the second receive step, next you can - like before optional - execute a transformation step.
Finally u close the sync/async bridge and send the response back. This will take assumedly a minute or more.
The whole design is may be not sufficient. Better ask if the requierments are changeable.
Regards,
Udo

File - AS2 error?

Hi Guys,
We are doing File - AS2 and we are getting the error as below. I have tried both with and with out the dynamic attributes and with out the certiifcates as well and getting the same error as below
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: 'CONEXIS' and AS2To: 'LF'., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: 'XXXX' and AS2To: 'YX'..
any help would be appreciated
Thanks,
Srini

Hi Srini
I am getting the same error as below.
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: '3PL_PTY' and AS2To: 'WHPL_3PL_PTYQ'., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: '3PL_PTY' and AS2To: 'WHPL_3PL_PTYQ'..
We have migrated from XI 3.0 to PI 7.1 and after that we are facing this issue in all AS2 receiver channels.
Do you have any idea how should we tackle this?
Thanks in advance
Dhanish Joseph

Exceptions in file-idoc scenario

Hi Folks,
I am developing a file-idoc scenario. What are the different exceptions I would be needed to handle apart from the following two identified?
1. Mapping issue
2. Problem in posting the idoc (SAP system may be down and others)
Thank you

Hi Raja,
The errors an happen at following steps:
1. Error while picking the file:File adapter error
2. Error in mapping: error due to incorrect data, incorrect format, corrupt file etc.
3. While posting Idoc: due to Incorrect userId password, due to structure not matching, destination system being down.
Hope this helps.
Regards
Vijaya

Help with simple file to file BPM scenario

Hi Gurus,
I am doing simple file to file BPM scenario.
I am getting an error in SXI_CACHE with status code 99.
I activated the business process then status code changed to 2.
When i tried to activate the process again i am getting prompted to enter access key details.
Is there any other way to get rid of the error i.e., to get the status code to zero with giving access key details.Sample access key details are also greatly appreciated.

Hi Bhavesh,
I tried doing that but of no use.
I registered at https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
and got a mail with details.I was actually looking for access key details in the mail from sap.The details in the mail contains License key but not access key .Are the both access key and license key same?

ALE Settings For File-IDOC Scenario

Hi All,
While Doing IDOC-File Scenario we have to do the Following Settings
In XI
1) Create RFC Destination towards R/3
2) Create Port
3) Load Meta data
In R/3
1) Create RFC Destination towards XI
2) Create Port
3) Create PF
Q1) Coming to File-IDOC Scenario do we need to do the Same Settings ????
Q2) In this File-IDCO Scenario do we need to create RFC Destination in R/3 towards XI ????
Clarify me these Confusions
Regards
Bopanna

HI,
for IDOC TO FILE
We need to create the rfc destination at XI side so as to send the acknowledgement to sap r/3 as soon as idoc has been received.This is the reason WHY WE NEED RFC DESTINATION AT XI SIDE
There are are only 2 major difference in Ale settings for FILE TO IDOC AND IDOC-FILE
i.e for FILE-IDOC
1) No need to Distribute the modal view
2) For partner profile Specify the INBOUND PARAMETERS
FOR STEP BY STEP U CAN SEE THE SETTINGS GIVEN BELOW
We need to do the following settings in XI
1)   Create an RFC Destination to the Receiving System in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a)   Select Create New button
b)   Enter the port name as SAP+SID (The starting char should be SAP)
c)   Enter the destination client
d)   Enter the RFC Destination created in XI towards R/3
e)   Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
                    SETTINGS IN SAP R/3
     We need to do the following settings in R/3
     Logon to Sap R/3 System
1)   Create an RFC Destination to XI in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h)   Test the connection and remote logon.Both must be succesful
2)   Create communication Port for Idoc processing Using Transaction(We21)
a)   First Select Transactional RFC and then click create button
b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
d)   Enter the RFC Destination created in SAP R/3 towards other system.
e)   Save
3)   Create Partner Profile with Inbound Parameters (WE20)
a)   Create New
b)   Create the Partner no. name as same the logical system name of the destination system
c)   Select Partner type LS
d)   Enter details for Type: US/USER, Agent, and Lang
     Then Save
e)   Select Partner no. and LS which were create above
f)   Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter
g)   Select Message type
h)   Double click on Message Type and Then Enter the details for Message Type and Process Code.
I)   save
4)   In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
     and then assign logical systems
b)   Double click on Define the logical systems
c)   Give data for your Logicaal System and Name
d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e)   Assign the logical system name to the client
ALSO WE NEED TO CONFIGURE THE IDOC ADAPTER AS RECEIVER TO CONVERT THE IDOC-XML TO IDOC
PLZ REFER THE LINK BELOW.
PLZ REWARDS THE POINTS
VIKAS JAIN
                                                                                [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098]
Edited by: vikas jain on Jan 22, 2008 11:49 AM

File Conversion to File Conversion Scenario..

Hi,
I am doing a File Conversion to File Conversion scenario. Hope its clear..
Well in this scenario my structure is
<File2File_Conversion_Sender_MT>
<Employee>
<id>aa</id>
</name>sas</name>
<Employee>
<File2File_Conversion_Sender_MT>
In sender:-
Wat will be the document name?
Recordset name?
Recordset structure?
In receiver:-
Recordset structure?
Let me know if any more clarification is needed.
thanks
Anju

Hi Anju,
Use this :
Document Name : File2File_Conversion_Sender_MT (this is Outbound Message Type)
Document Namespace : NAmespace of outbount Message Type.
Recordset Structure : Employee,*
Name----
Value
Employee.fieldSeparator -
>   ,
Employee.endSeparator -
> 'nl'
Employee.fieldNames    -
> id,name
ignoreRecordsetName   -
> true
Go through this :
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Thanks,
Maheshwari.
Message was edited by:
        Maheshwari Morbale

File - AS2 Scenario

Similar Messages

Maybe you are looking for