File Association conflict between CS6 and CC 2014

I have both CS6 and CC2014 loaded on my computer.
I want to use CS6 for file associations, but I am being prevented from doing so by CC2014 which pre-emts CS6 and blocks me from changing file associations for .jpg files etc. in Windows 7. How do I fix this?

Are you sure? I just had a quick look, and by taking the usual route or right clicking a JPG and choosing Open With > Choose Default program, I was able to browse to the pre 2014 version of Photoshop, and assign it. I don't have CS6 installed at the moment, but I can't think why it shouldn't work the same way.

Similar Messages

File association conflict between two applications

I'm using an editor called Sublime Text and recently upgraded from version 2 to version 3. Both versions share the same exe filename but are installed in different directories.
C:\Program Files\Sublime Text 2\sublime_text.exe
C:\Program Files\Sublime Text 3\sublime_text.exe
When both versions are installed, it was not possible to change file associations from ST2 to ST3 since Windows treated them as the same application and started ST2 instead.
When I removed ST2 it was still not possible to associate files with ST3. When I choose Open with - Browse and select sublime_text.exe, nothing happened. The solution was to remove this registry key
HKEY_CLASSES_ROOT\Applications\sublime_text.exe
as described here:
http://www.sublimetext.com/forum/viewtopic.php?f=3&t=12928
Is this a common problem for all programs that share the same exe name or has the developer made an error somehow by giving both versions the same id?

This is a common problem. The problem is that the ID remains the same for both the versions. Therefore version conflicts occur. And that's the reason it's recommended to use only one version at a time. And so, most softwares are designed to remove their
lower versions before installing higher version.
If you mean 'upgraded', generally, lower version will be removed automatically.
So try removing both the versions, restart the PC, install the higher version, restart the PC and then check.
Balaji Kundalam

Conflict between CS6 and CC on my PC.

When we were about to purchase Photoshop, I downloaded and installed the PS-CS6 demo. Right around the same time, CC was launched, and we subscribed to that instead. When I open PS, it says CC. Even if I click on the CS6 icon that's still in my program menu, it opens as CC.
Some other Adobe products, however, think I have CS6 only. I tried to install a new action table for CC and got a warning that said I could not proceed because I did not have CC installed. Instead, I installed the CS6 table version, and the Adobe Extension Manager allowed that. Once I re-opened PS, however, the new action table was not installed.
So, it's not possible for me to run CS6 on my machine, and CC runs perfectly, but the Extension Manager thinks I only have CS6 on my machine.
Thanks. Photoshop is still the greatest program ever created.

Thank you for the reply. Your questions got me thinking, and I as able to fix it.
PS CC is 14.2 x64.
The extension manager (for CS6) is version 6.0.7.6. I noticed another folder for the CC extension manager, but could not open the manager from inside there.
I went into PS CC x64, and from inside that I clicked to open the Extension Manager, and the CS6 EM is what opened. Then I saw the command "Install Extension Manager," so I did that and the CC extension manager installed. Now the other table and actions I was trying to install have been moved into CC.
Thanks for your help.

Photoshop CC File Associations revert to CS6

Photoshop CC: PSD File Associations revert to CS6 in Finder>Get Info - Mac. File associations in Bridge manually updated and are working, but Finder still reverts to CS6 when changed in the Get Info window of a .psd file.

I was having this same issue and I fixed it but I'm not exactly sure what did it... I'm using Snow Leopard on a Mac and I have cs5, cs6 and CC installed. Initally after installing CC, I was able to associate files using the normal "open with" and "change all" dialog. However, after installing a Mac security update today, the "open with" reverted to CS6 and when trying to change all to open with Photoshop CC, it would just revert to CS6. Here's what I did today before I was able to change them all back to CC.
1. Installed Photohop CC Update
2. Restarted Computer
3. Changed *one* file to open with CC and closed the dialog
4. Installed PHotoshop CS6 Update
5. Opened that "one file" (which still had open with Photoshop CC selected) and hit "change all"
Magic. Not sure what did it... but maybe if you repeat that process, it will work for you.

[JS CS3] Conflict between palettes and panels

Hello,
I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
Thanks,
Tom

Thanks. I'll give it a try, but I even uninstalled both programs, tried
reinstalling Reader only, and when that didn't work, uninstalled Reader and
then reinstalled Acrobat. Still a problem. The particular website is
www.officeally.com, and it opens the PDF file in a browser window, I believe
using an ASP file.
Larry

Software conflict between iPhoto and Sony MP3 player

I am experiencing a major software conflict between iPhoto and my Sony MP3 player (model: NWZ-E443). In the past, whenever I connect the MP3 to my 2009 MacBook Pro, iPhoto always opened. I would simply close iPhoto and everything would be OK, though. But after upgrading iPhoto a few months ago via an upgrade download I am now unable to view images full-screen. Although thumbnails display OK, when I double-click on any of them to display full-screen, the MP3's 'Do Not Disconnect' image displays full-screen instead, even when the MP3 is not connected.
I have tried reinstalling iPhoto from the original iLife disc, but this didn't work and my fear is that the Sony software has somehow corrupted every image single file in my library.

Turns out my Mac put code on the mp3 player because after I reset the mp3 player to its 'factory settings', (erasing everything) it went back to normal and now shows up in the finder window.

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

45 min long session of log file sync waits between 5000 and 20000 ms

45 min long log file sync waits between 5000 and 20000 ms
Encountering a rather unusual performance issue. Once every 4 hours I am seeing a 45 minute long log file sync wait event being reported using Spotlight on Oracle. For the first 30 minutes the event wait is for approx 5000 ms, followed by an increase to around 20000 ms for the next 15 min before rapidly dropping off and normal operation continues for the next 3 hours and 15 minutes before the cycle repeats itself. The issue appears to maintain it's schedule independently of restarting the database. Statspack reports do not show an increase in commits or executions or any new sql running during the time the issue is occuring. We have two production environments both running identicle applications with similar usage and we do not see the issue on the other system. I am leaning towards this being a hardware issue, but the 4 hour interval regardless of load on the database has me baffled. If it were a disk or controller cache issue one would expect to see the interval change with database load.
I cycle my redo logs and archive them just fine with log file switches every 15-20 minutes. Even during this unusally long and high session of log file sync waits I can see that the redo log files are still switching and are being archived.
The redo logs are on a RAID 10, we have 4 redo logs at 1 GB each.
I've run statspack reports on hourly intervals around this event:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And here is a sample while not encountering the issue:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66
Yes I know I am already tight on I/O for my redo even during normal operations yet, my redo and archiving works just fine for 3 hours and 15 minutes (11 to 15 log file switches). These normal switches result in a log file sync wait of about 5000 ms for about 45 seconds while the 1GB redo log is being written and then archived.
I welcome any and all feedback.
Message was edited by:
acyoung1
Message was edited by:
acyoung1

Lee,
log_buffer = 1048576 we use a standard of 1 MB for our buffer cache, we've not altered the setting. It is my understanding that Oracle typically recommends that you not exceed 1MB for the log_buffer, stating that a larger buffer normally does not increase performance.
I would agree that tuning the log_buffer parameter may be a place to consider; however, this issue last for ~45 minutes once every 4 hours regardless of database load. So for 3 hours and 15 minutes during both peak usage and low usage the buffer cache, redo log and archival processes run just fine.
A bit more information from statspack reports:
Here is a sample while the issue is occuring.
Snap Id Snap Time Sessions
Begin Snap: 661 24-Mar-06 12:45:08 87
End Snap: 671 24-Mar-06 13:41:29 87
Elapsed: 56.35 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 615,141.44 2,780.83
Logical reads: 13,241.59 59.86
Block changes: 2,255.51 10.20
Physical reads: 144.56 0.65
Physical writes: 61.56 0.28
User calls: 1,318.50 5.96
Parses: 210.25 0.95
Hard parses: 8.31 0.04
Sorts: 16.97 0.08
Logons: 0.14 0.00
Executes: 574.32 2.60
Transactions: 221.21
% Blocks changed per Read: 17.03 Recursive Call %: 26.09
Rollback per transaction %: 0.03 Rows per Sort: 46.87
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 98.91 In-memory Sort %: 100.00
Library Hit %: 98.89 Soft Parse %: 96.05
Execute to Parse %: 63.39 Latch Hit %: 99.87
Parse CPU to Parse Elapsd %: 90.05 % Non-Parse CPU: 85.05
Shared Pool Statistics Begin End
Memory Usage %: 89.96 92.20
% SQL with executions>1: 76.39 67.76
% Memory for SQL w/exec>1: 72.53 63.71
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And this is a sample during "normal" operation.
Snap Id Snap Time Sessions
Begin Snap: 671 24-Mar-06 13:41:29 88
End Snap: 681 24-Mar-06 14:42:57 88
Elapsed: 61.47 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 716,776.44 2,787.81
Logical reads: 13,154.06 51.16
Block changes: 2,627.16 10.22
Physical reads: 129.47 0.50
Physical writes: 67.97 0.26
User calls: 1,493.74 5.81
Parses: 243.45 0.95
Hard parses: 9.23 0.04
Sorts: 18.27 0.07
Logons: 0.16 0.00
Executes: 664.05 2.58
Transactions: 257.11
% Blocks changed per Read: 19.97 Recursive Call %: 25.87
Rollback per transaction %: 0.02 Rows per Sort: 46.85
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 99.02 In-memory Sort %: 100.00
Library Hit %: 98.95 Soft Parse %: 96.21
Execute to Parse %: 63.34 Latch Hit %: 99.90
Parse CPU to Parse Elapsd %: 96.60 % Non-Parse CPU: 84.06
Shared Pool Statistics Begin End
Memory Usage %: 92.20 88.73
% SQL with executions>1: 67.76 75.40
% Memory for SQL w/exec>1: 63.71 68.28
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file

Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file was created on a MAC and I am trying to open it on a MAC. Any/all advice is greatly appreciated as I am up against a deadline with this unopened file! Many thanks in advance, Diane

There's a good chance the file is corrupt. As whomever sent it to you to verify it opens on their end.

Can I use a Photoshop CS6 guide book I got in college to learn CC, or is there too many differences between CS6 and CC?

I have a guide book I got in college to help me learn Photoshop CS6, but I never finished the class. My question is: Can I use this book to learn Photoshop CC or is there too much diversity between CS6 and CC?

caj50932876 wrote:
Thanks! I appreciate you answering so quickly!
That's OK. We race to be the first responder, because we are sad geeks, and first responder sounds like something from a TV reality program. Benjamin actually has flashing lights and a siren on his computer.

Name space conflict between static and instance method

Hello,
there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
static String description() that should return a description of a class.
String description() that should return a description of an instance.
That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
Thanks for any insights :-)

Umm...jeez.
It's not a bug, it's the way it's supposed to be.
Since a static method can be called the same way an instance method
A instance = new A();
A.staticMethod();
instance.staticMethod();it's not allowed.
Also in the class, you can call
public void myMethod() {
instanceMethodInClass(); // You don't need this, it's superfluous
staticMethodInClass(); // You don't need the class name.
}If you didn't understand, then just accept the fact that it is so. Some day you'll understand it.

Conflict between VPN and Airport disk

Hello Folks, I just bought a brand new airport extreme 802n.
I thought it would be working fine with my Macbook pro, but it doesn't.
I can't access any externe hard disk or USB Stick through the airport extreme, although the format is FAT32. I checked and checked but found nothing useful. All the settings are default.
Worth to mention, I always use a cisco VPN client to get connected to the Internet (university student).
There are few times when I disconnected the VPN Client, the USB Client can be found and read, but not be written.
I though it is a conflict between VPN and Airport disk. So I tried without VPN, but the USB stick and the extern hard disk still didn't work properly. I have no idea what is happening could somebody help?
By the way is it possible to set Airport extreme as a VPN router so I don't have to use the cisco VPN client anyway?
Any reply is appreciated
Thank you !

I have an Airport Extreme connected to a cable modem
with comcast as my isp. The Extreme is connected to
a G4 dual processor mac via ethernet. I also have 3
airport expresses around the house to work as range
extenders. When I had the G4 connect to the Extreme
via its internal airport card, I had no difficulty
connecting to any of the Expresses around the house
with my g4 powerbook. Now that I have the G4 Dual
directly connected by ethernet to get the fastest
speed, I cannot get my expresses or my laptop to
connect through my laptop to the base station. all
lights are green on the expresses, but running
network diagnostics on the powerbook shows red or
yellow for the last two buttons on the right. Do I
have a configuration problem or an Extreme that won't
bridge properly?
Check that the G4 Dual has a location configured with
only "Built-In Ethernet" activated, and that its
Ethernet connection isn't shared on AirPort.
Turn off all your AX and check that your
PB G4 is able to connect to "your" AirPort network.
Take advantage of this silence of all your AX
to run an analysis of your wireless environnement:
- check that you don't have any neighbor wireless
network,
- check that on each of your AX settlement you have a
very good reception of "your" AirPort network.
If everything works fine to that point, add one AX to
your network, and check the reachability of your network
where you wanted to extend it.
dan

Metadata Conflicts between LR4 and CS6

I recently upgraded to LR4 and CS6 Extended. I will offer start in LR4 but switch to CS6 for additional editing. On some of my thumbnails, I will see a "!" in the upper right hand corner on the thumbnails. When I click on the icon, a pop-up window appear stating a Metadata conflict has occurred. The pop-up window gives you two options: Copy file data into the catalog or have the catalog overwrite the file data. What is the best thing to do knowing you are only working between LR4 and CS6?

This is a known issue with the latest PS update. Refer to the pertinent thread on the PS forum.
Mylenium

File Association conflict between CS6 and CC 2014

Similar Messages

Maybe you are looking for