File attcahed to a PO

Dear Freinds,
Any idea as to in which sap database table ( or at which location in sap database) info about file attched to a PO is stored.
Scenario is that, I am attching a word or excel file at header level of Vendor PO , file which is stored on my desktop 
Thnks
Vinod

hi,
for genereic object service look table SGOSHIST
for info that a file was attaches
A.

Similar Messages

Filtered data has to show in X axis

Would you please guide me how to get the dynamic filtered data in column chart x axis ?
1. I have 7 columns.
2. Using filter component with 4 data filters
3. Remaining 3 values 2 columns will be Y axis n 1 will be X axis
(which is dynamic)
4. X axis , I am able retrieve one record not all
(some of the filter I have two more data / records).
Please find the attached .xlf with .xls files (attcahed files are in compressed mode). I don't khow, how to upload the source
Happy to discuss
Edited by: stsrin on Jan 5, 2010 9:00 AM
Edited by: stsrin on Jan 5, 2010 9:00 AM

I was able to figure this out.
When we use Just textRotation = "TR_HORIZ_ROTATE_90" This wouldn't work. we need to include automaticRotation = "AR_NO_ROTATE"
Used this and it worked.
<O1TickLabel textRotation="TR_HORIZ_ROTATE_90" automaticRotation="AR_NO_ROTATE" />

How to pass .txt file as an attachment to the web service (SOAP Attachment)

Hi,
I am creating web service using NetBeans 6.5 IDE and JAX-WS. I create a web application and then create web service using provided interface. I want to add .txt file as an attachment/parameter to the web service operation using "Add operation" interface. Don't want to add as an attachment to the SOAP message by creating it explicitly. IDE generates SOAP request and response automatically when the service is tested using "Test Web service" option. How can I add attcahment when I add operation so that it will appear in the generated SOAP message ?
TIA.

Hi AnitaDP,
Attachment doesn't work in web service. You have to pass the content of the text file as a String or as an array of bytes to a method of your web service. From there, you may save the passed data in a file.

Sales order delivery(VL03n) - Attcahment fntp pointer change.

Hi !
In my sales order delivery screen we have a option for attachment list which shows the service attachment list line and when we double click on it it takes as to the attcahment or opens up the attcahment. I would like to chnage the address of the file it points to as right now where it points to shows erroras its not pointing at the right directiuon . I would like to change the fntp so that that it poitns to the right folder and opens up the correct attachment. Could anyone please let me know where do i go to change that.
Thanks

if your stroage is
in GOS use transaction OAOR
or
in DMS then use transaction CV02N
a®

Delete File From Mounted Volume

Hey,
I am trying to delete the "Calendar Cache" files on both my laptop PowerBook G4 and the Mac Pro Quad that I sync my calendars with. I am using ChronoSync and the individual calendars sync fine, but there is a little house keeping needed with the cache file. They need to be deleted on both systems in order to "refresh" the views of the calendars.
So after the sync of calendars, I have the software initiating an AppleScript that deletes both. Here's the script:
+(* PowerBook Files / delete cache file *)+
+(* Please note that both systems have the same username. This may be arise a conflict *)+
+tell application "Finder"+
+ activate+
+ tell application "Finder" to delete file "Calendar Cache" of folder "Calendars" of folder "Library" of disk "useranthony"+
+end tell+
+(* Mac Pro Quad/ delete cache file *)+
+tell application "Finder"+
+ mount volume "afp://10.10.10.1/anthonyabraira"+
+ tell application "Finder" to delete file "Calendar Cache" of folder "Calendars" of folder "Library" of disk "/volumes/useranthony"+
+end tell+
I am having trouble addressing a deletion on the networked Mac Pro Quad.

why send it to the trash just delete it...
(* PowerBook Files / delete cache file )
try
do shell script "rm -rf /Library/Calendars/Calendar\\ Cache"
end try
you may need a delay for the Mac Pro Quad to mount
( Mac Pro Quad/ delete cache file *)
--the mount and then the delay
delay 4
try
do shell script "rm -rf /THE-CORRECT/PATH-HERE/Library/Calendars/Calendar\\ Cache"
end try
Tom

How Open And Print Proc C Genrated Text File Based Report ON Browser

Dear Sir
I have my old 6i forms from which i runs some Pro*c programmers with the help of HOST() command ,and then that generates a normal text file as a resultant report like file name "kha10"
which i can easily open with any text client ,,,
now what i want is that, to open this file on browser like web Report on my forms 10g like report builder 10g
can anyone help me as it will be a gr8 help otherwise i would have to develop approx 100 reports.....
any solution or any technique plzz help me

bro my work is almost done apart from this virtual directory , how to make a virtual directory so that is dosent comes under
http://........../form/
i mean where to put my
<virtual-directory virtual-path="/procrepo" real-path="c:\" />
as my original file looks like bellow
<?xml version="1.0"?>
<!DOCTYPE orion-web-app PUBLIC "-//ORACLE//DTD OC4J Web Application 9.04//EN" "http://xmlns.oracle.com/ias/dtds/orion-web-9_04.dtd">
<orion-web-app
 deployment-version="10.1.2.0.2"
 jsp-cache-directory="./persistence"
 temporary-directory="./temp"
 servlet-webdir="/servlet/"
>
<context-param-mapping name="configFileName">D:\DevSuiteHome_1/forms/server/formsweb.cfg</context-param-mapping>
 <virtual-directory virtual-path="/html" real-path="D:\DevSuiteHome_1/tools/web/html" />
 <virtual-directory virtual-path="/java" real-path="D:\DevSuiteHome_1/forms/java" />
 <virtual-directory virtual-path="/webutil" real-path="D:\DevSuiteHome_1/forms/webutil" />
 <virtual-directory virtual-path="/jinitiator" real-path="D:\DevSuiteHome_1/jinit" />
 <session-tracking cookies="disabled" />

<security-role-mapping name="administrators">
</security-role-mapping>
</orion-web-app>
plzzzzzzzzzzz help

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How do I find, at-a-glance, the sample size used in several music files?

How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
Craig

C-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html

Windows no longer boots up, paging file error

I just reinstalled windows on my mac last week because until now I had been running the old beta version of boot camp.
Just a few days ago I started getting blue screens every so often and it happened again (twice to be exact) yesterday, however one of the times it booted up and informed me I might want to change my paging file size. Not quite sure what this was I went and found the paging file option in settings and found it was clicked on a set size...so I figured I'd set it on the option that lets windows decide for me hoping this would fix the blue screen problem.
I shut down my computer later that night and now windows won't get to the desktop.
When I start it up normally it runs the system check (which I cannot skip for some reason) which gets to 84% and then says \windows\Dump3865.tmp is cross-linked on allocation unit 1731772
Above it it mentions there is an invalid size for my page file.
I tried booting it up the in safe mode multiple times and every time it generates a list in dos and stops on windows\system32\Drivers\mup.sys
I really don't want to have to reload windows again. Is there anyway to skip the system check (it says press anykey, but that has never worked for me) or any other way to get my paging files back to the way they were?
Thank you.
Oh I'm running leopard with windows XP professional on a macbook pro (last years model) if that helps in anyway.
Message was edited by: Tommmmm

A. run chkdsk
B. What happens if you boot from XP CD and Repair System
C. system file checker - from command "sfc /scannow"
http://www.informationweek.com/news/windows/showArticle.jhtml?articleID=18530125 1
http://windowshelp.microsoft.com/Windows/en-US/Help/f768809f-ed90-415f-a83f-89b4 2108b3551033.mspx

ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!

Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested.

Error while deploying a PAR file from NWDS into an ECC.

Hi all,
I am getting this error while deploying a PAR file from NWDS into an ECC.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
My server is running properly
1 - Where is sap-plugin.log file? I don´t find it.
2 - Could there be another file with another name with information about the error?
3 - Is there another way to deploy the file directly from the ECC?
Regards,

Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards,

In order to create space on my MBA I just bumped iTunes media to G drive linked through Time Capsule. Now pointed iTunes at new iTunes libary on G drive and, even though all music files are there, iTunes can only 'see' 10 albums. Any help appreciated.

Bit more detail...
Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely. This didnt' work. I took it into the Genius bar and the genius there told me that time capsule is not designed for anything other than back up. Instead I have to connect a G drive through the time capsule's wireless router to my MBA.
I followed his instructions - moved my files from the Time Capsule and MBA directly onto the G Drive - which took a heartening 2 hrs so something must have been happening - and the held down 'Alt' when starting iTunes and selected the new itunes folder as the location of my itunes libarary which I wanted iTunes to 'point at'. When I opened iTunes only 10 albums are visible now.
In ITunes advanced preferences it says it is pointing at the correct folder. The files are all cleary there when I open the G Drive folder to take a look. But I cannot get iTunes to find them.
Any suggestions?
Secondary challenge - in spite of deleting the original itunes folder on my MBA I still get messages pop up telling me my start up disk is out of space and I need to clear some - I expected to stop getting this message now I had done this exercise above. I have emptied Trash. Again - any pointers appreciated. I am new to this world of 'intuitive' macbooks.
Cheers

After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Issue in Creation of XML file from ABAP data

Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
 - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
 <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
 <Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
 <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
 </Header2>
 </Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

File attcahed to a PO

Similar Messages

Maybe you are looking for