File-BPM-FIle
When I was trying to save receiver determinations
1)from business system to Integration Process and also 2) Integration Process to Business System
I am getting this error.
<<
Check result for object "businessSytem/outbound Message Interface"
Enter the receiver service
>>
thanks-GS
Hi GS,
>>BPM will not be activated if there is some mandatory values are missing.. is it not the right statement?
Correct,
>>my outbound and inbound datatype structure is diff.. but I have the message mapping for it.. will it be a problem?
No, Will not be problem,
1) Check out the " outbound Message Interface " what mode you have selected.
2) Why can't you activate the other objects and try to save the Receiver.
Regards
Agasthuri Doss
Similar Messages
-
File to file scenario: EOIO queue name?
hi forum,
i have file to file system, in the sender file communication channel,
i need to use qualit_of_service as "EOIO", but for that i need to use a Queue Name, what should i give as the name of the queue, for test purpose i gave the name of the queue as "xyz", but it works........
but i dont know how it workedhI SUMIT,
i have a question for long,
i have a typical file BPM file scenario,
when the scenario run....i can see two rows in the MONI, one from sender service to the BPM, and the other from BPM to the Receiver service,
in the moni there is a column called Queue Id,
as i mentioned .... the row in MONI corresponding to Sener service to BPM, the queue ID is always XBQO* ....... as far as i have read, 'Q' in XBQO signifies that it is queue RFC, and it is so even if my file sener sends it using EO(transactional RFC), means no matter how i configure my sender file channel(EO or EOIO), it shows the Queue Id as XBQO*,
i assume that XBQO* means queue-RFC
and XBTO* means Transactional RFC,
pls help -
File-RFC-File (without BPM)- Issue
Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean Local Enterprise Bean 1
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOnewayBean Local Enterprise Bean 3
Module configuration:
1 PassThrough true
3 receiverChannel <FilereceiverCCname>
3 receiverService <Receiver Bus System>
Regards,
NithiyanandamHello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh -
How many Communication Channels required for File--Bpm(SAP R/3)--File
Hi
Pl..help me on this
I am doing the following scenario File 2BPM 2 File
i.e File -
BPM(ASync)
BPM -
SAP R/3(Sync)
SAP R/3 ---BPM (Sync)
BPM ---File (Async)
For me it looks three CC's but still i am not confident
Can any one explain me on this
Adv thanx
Prasad KFile(<b>CommChannel 1 -File Sender</b>) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (<b>CommChannel 2 - RFC Receiver</b>)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(<b>CommChannel 4 - File Receiver</b>)
<i><u><b>So a TOTAL of 4 Comm Channels.</b></u></i>
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null -
Error: 1:n multi-mapping using BPM for file to file scenario
Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
PavinHi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
Message1
MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami. -
File - RFC - File without BPM --- Object not found in ResponseOneWayBean
I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1 passThrough true
3 receiverChannel CC_LOTUSNOTES_CHALET_RCV_FILE
3 receiverService Bus_File
pls let me know where i am wrongHi
i am facing following error:
2009-12-03 09:08:17 Information The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17 Information MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17 Error MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17 Error File processing failed with java.lang.NullPointerException -
File is not getting deleted in File-RFC-File without BPM
Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AMHi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini -
Problem in FILE to FILE scanariao with BPM
Hi all,
Please give me the advise regarding scanario File to File with BPM. When i was sending the message from source to target its not getting. The message can be taken from sorce file, but in recieving side i did't getting.
I checked both adpters, in send adapter get the message, but the reciaver adapter not getting message. Please give me solution any one.
Thanks & Regards
Gangi Reddy.P
SAIC_INDIA
Bangalorehi,
check this doc:
https://websmp110.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
maybe it's stuck in the BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
File to File using BPM & value mapping
Hi,
I have the following scenario to do. sample file structure is given below.
source:
HDR 13052008INDIA
BDY 123456
BDY 1234567
EOF
Target:
HDR 2IN BDY 123456 EOF
HDR 2IN BDY 1234567 EOF
for the above mentioned source and target mapping. we have to use BPM and value mapping.
In the HDR row 13052008 is the date value this has to be passed to RFC function module and it will return 2, this value has to be mapped to target
And INDIA has to be mapped to IN using the value mapping option. similarly we have many coutry code.
could anyone let me know the step by step procedure to achieve this, I followed the blog https://weblogs.sdn.sap.com/pub/wlg/1926. [original link is broken] [original link is broken] [original link is broken] but it does not fit to my scenario.
help is appreciated.
Regards
RDSHey,
This is a normal file to file scenario.
You need to use RFC look up instead of value mapping.(as you need to extract 2 and IN from an RFC)
There is no need for a BPM.
refer to this blog(for RFC look up)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
this will solve your problem.
Output of RFC look up will be 2 and IN . So use the concat function.
Other values map them directly from source to target.
Also, set the occurence for the target structure as 0 to unbounded in the mapping.(this is to be done in order to have one file for each record of the source)
You also need to configure file content conversion.(both at sender and reciever side) to convert the text file to XML on the sender side and then XML to text at the reciever side.
refer to this link for FCC.
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
This is for sender file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
This is for reciever FCC.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
reward points if useful.
regards,
Milan -
Help: : Error in BPM (FILE to FILE)
Hi All,
I am trying out a file to file scenario using BPM and i'm following the blog "/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
But after the file gets picked up, the process fails in the call adapter step.
I see the mapping is done properly.
How to solve the issue?
And In SXMB_MONI I see the following steps are processed successfully.
Inbound msg -> receiver grouping -> Response.
and the process fails at "Call adapter" (No specific error as such, but the flag for Call Adapter is displayed as "Arrow Mark (->)" i.e Transfer to process engine.
Please find the call adapter's trace below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 95D7D260E96C11DAB2CD001438BD2DC3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0007</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0007</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO30__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://abc.com/F2FBPM IM_F2F_BPM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" />
- <!-- ************************************
-->
</SAP:Trace>
Thanks
Ajay
Message was edited by: Ajay Kumar V
Message was edited by: Ajay Kumar VHi
I have worked on the same weblog.But its workin properly for me.I think your problem is in receiver determination.
You hav to create two receiver determination and 1 sender agreement and receiver agreement each.Please check it out.
Regards
Victoria. -
Error in File-RFC-File Without BPM
Hi,
We are following this wiki
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)]
and we are getting Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error in sender communication channel monitoring. File is not picking. I think problem with the parameters that we have mentioned in module tab in sender communication channel as specified in the wiki. If we remove additional 2 parameters it is picking the file.
Please help me to resolve this issue.
Thanks.
Jyothi Anagani.are you able to see the logs of file adapter?
go to messaging system and check the details
http://host:port/MessagingSystem/monitor/monitor.jsp
Rajesh -
Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario
Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
AmitSometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek -
Interface mappin in File to File using BPM
Hey guys
why is it that in a asynchronous File to File scenario using BPM,we make interface mapping between outbound message interface and the abstract message interface whereas in general its between outbound and inbound message interface.also why we dont have any interface mapping between Abstract interface and inbound interface.
thanx
ahmadAshish,
From the link,
http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
<i>Every step of an integration process uses Integration Server resources.
● Every message that is sent to the Process Engine is duplicated.
● Every message that is sent from the Process Engine is duplicated.
● A work item is created for the process itself and for every step the process contains.
This means that for a process that just receives one message that is sent without being processed further, four messages and three work items are created.
For this reason, you must ensure that you take Integration Server resources into account when you define integration processes. </i>
So, by having the transformation outside the BPM , you are avoiding one message to be stored inside your BPM and therby the replication. The message that hits the BPM is the transformed message directly which avoid consumption of resources.
So, as much as possible keep mappings outside the BPM.
Regards,
Bhavesh -
Error in BPM: FIle to RFC
Hi friends,
I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.I am getting error in Integration Engine.....
Attribute Value
Engine Integration Engine
Status System Error
Repeatable No
Cancelable No
Start 20.06.2007 06:25:22
End 20.06.2007 06:25:22
Sender Party
Sender Service BPM_FILE_RFC_SAGAR
Sender Interface http://File2RFC_Syn
FileRequest_AI
Receiver Party
Receiver Service ECCIDOC800
Receiver Interface urn:sap-com:document:sap:rfc:functions
BAPI_SALESORDER_GETLIST
Quality of Service Best Effort
Error Category
Error Code
Message 9BA7365DDBC0FE49B9F512F7308DDA53
Reference -
File to File output not received using BPM
Hi...
I am doing simple File to File scenario using BPM. Everything id fine. But i am not getting output in receiver side.Could you please help me out in this issue.
Thanks
LeelaLet me tell you ID configuration for this blog...
1)Sender Agreement :
Sender service : Source Service interface : source_ob
Receiver service : BPM
create sender channel
2)Receiver agreement :
Sender service :BPM interface : target_abs
Receiver service : Target service
3)Receiver determination 1:
Sender service : Source service interface : source_ob
Receiver service : BPM
4) Receiver determination 2:
Sender service : BPM interface : target_abs
Receiver service : Target
5)Interface determination 1:
Sender service : Source interface : source_ob
Receiver service : BPM
Inbound interface : target_abs
Interface mapping : specify the interface mapping name
6)Interface determination 2:
Sender service : BPM interface : target_abs
Receiver service : Target
Inbound interface : Target_IB
Interface mapping : N/A
Check the above config with ur configuration
Maybe you are looking for
-
Hi All I have a labview application that send mail every hour automatically. But actually the mail has to be decoded from the web server(by another application).But now when that application decode the data in the mail(that is send by labview applica
-
How to make Navigation Panel invisible on portal screen????
Hi, I need to create two roles ( X and Y ). when the user is assgned role X: he should see standard portal screen When user is assigned role Y: he should see customized portal screen. Features of customized portal screen: All features of portal shoul
-
IDOC to File Senario - Mapin error
Hi, I am trying IDOC to File Senario using XI. I am stuck while message mapping. I need to map IDOC : MATMAS.MATMAS01 (Material numbaer and Matrial description ) to File. I have imported IDOC : MATMAS.MATMAS01 in IR. Created target Data type/ mess
-
I enter the code and it returns me to Firefox Sync again
I want to sync my desktop to my new laptop. I entered the code both ways, desktop to laptop and laptop to desktop, enter, then the original Firefox Sync page comes back up. Directions say "See Where can I find the code to add a device to Firefox Sync
-
Microsoft Outlook (Unlicensed Product)
I am quite upset... I purchased 2 VAIO laptops in 2007 with Service Pack 2 loaded on them... a year and a half ago I joined an IT organization which forced me to use Office 365 on my VISTA laptop. I had a fully licensed Windows VISTA - Office 2007 s