File Cant be Overwritten--File Adapter

Hi,
I am working on File1(csv)-2-File2(csv) scenario using FCC. Now i am trying to append my file1 fields into File2....
But its showing me an error --- File Cant be Overwritten.
I don't want to go with "OverWrite Existing File" option in Receiver side adapter..

Hi Sumit,
please go through this below blog....if you are still facing the same proble.Pleae let me know so that i can hlep you out.
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm.
Awaiting for yor reply.
Thanks in Advance.
Chandu.

Similar Messages

Why cant poll a file more than once using File Adapter..

Hi All,
When we run webservice, as I am using File Adapter to read/write the file information.
Usually, File Adapter reads once every file and it wont read again the same file whcih already red.
Where and How this status maintained by File Adapter/BPEL in the system.
Where this will be avvailable and why cant File Adapter read/poll the same file.
Pls can any one of you share your ideas on the same.
Thanks.

Hi,
Tried to get some information around where ftp adapter stores the timestamp but couldnt find anything useful.
But we have a table for File adapter which captures the processing information (FILEADAPTER_IN )
I dont have the setup for FTP adapter to run an example. If you could try the below we can clarify that the timestamp is not stored in memory.
Configure as usual for a folder with a file pattern for FTP adapter.
Drop a file to process it and then restart the SOA Suite and try to drop the same file with same timestamp to see wheather FTP adapter picks up or not.
Ideally i feel once you restart the SOA Suite it should pick up the file, if still not picks up the file for second time then we need to dig indepth to see where this information is stored.
btw what is your usecase ?
Thanks,
Vijay
Edited by: veejai24 on 11-Apr-2012 03:43

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

I downloaded a .zip file. It ate up my space and i cant find the file. How do i get this file off my phone?

I downloaded a .zip file. It ate up my space and i cant find the file. How can i get this file off my phone?

Not possible. Safari won't download and save a Zip file. You either had to use a 3rd party app, or as wjosten suggests, your phone is jailbroken. If the former, you'll need to use that app to find it. If the latter, you'll have to look elsewhere for assistance.

HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Cant delete apple files or update to newest itunes version windows 7 64 bit

cant delete apple files or upgrade to new itunes version

What error messages are you getting during the update attempts, candace? (Precise text, please.)

I can't get my music to play in my itunes. It comes with a exclamation mark next to the song numbers and says that the original songs can't be played cause cant find the file. How do I get the songs back? (I found the files)

I can't get my music to play in my itunes. It comes with a exclamation mark next to the song numbers and says that the original songs can't be played cause cant find the file. How do I get the songs back? (I found the files

You get exclamation marks or dead tracks because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
If you use an external drive, a change in drive letter is a common cause and you need to change it back.
AS a way of working out what has happened, right click on a track and select the summary tab (you will have to go past an error message). The summary tab will tell you where iTunes thinks the track is located. How does that compare with where the track actually is?
The xml library file is not used by iTunes, it is created to allow other programs to access the library. You can recreate the iTl file from the xml file, but there is no point if the location of the files is wrong.
There is a simple way of getting you music back in iTunes, but it loses all playlists counts and rating. To do this drag iTunes library.itl and iTunes Library.xml to your desktop. Then open iTunes and an empty library is created. Add you iTunes Media folder to it.
If you can't work out what went wrong and how to fix it, you may have to do this.

Renaming attachment file name in receiver mail adapter

Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
Shobhit

Hi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name                                                            Type                                      Module Key
localejbs/AF_Modules/MessageTransformBean   rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail     Local EnterpriseBean
Module Configuration
   Module Key               Parameter Name             Parameter Value
      rename      Transform.ContentDescription                      File
      rename Transform.ContentDescription attachement;filename="yourfilename.ext"
      rename            Transform.ContentType                 application/text;name="yourfilename.ext"
Thanks
Amitanshu

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

What is the use of additional file(s) in sender file adapter?

Hi experts,
what is the use of additional files parameter in sender file adapter?
give me some example.......
Thanks & Regards
E.Ravi Chandra Reddy

Hi,
please check the below link,
you can specify additional files to be included in the XI message as attachments.
http://help.sap.com/saphelp_tm90/helpdata/en/44/692ab8a4b633eae10000000a1553f6/content.htm
Regards

Operating System Command After File Processing in Sender File Adapter

Hello guys,
actually we have different interfaces, and the client to take all the files from only one directory, for example D:/DPI.
Unitl now we had one adapter for every file with the content conversion, so we didn't have problems with that. Now we have the problem that we sould maintain an order processing files.
We thougth that an idea could be to execute one file pointing to D:/DPI and at the Operating System Command put like: copy D:/DPI/file.txt D:/DPI/outbound/file.txt, so when file is executed, we move the next file to another directory where is pointing the adapter. Doing this we have an error on the adapter giving us the message: Could not process due to error: java.lang.NullPointerException
We are using a Windows.
There is anyway to do in our way, or there is a better solution to resolve this problem?
Any other idea to do this?
Many thanks in advance.
Regards,
Xavi.

Helo Guys,
maybe I haven't explained well.
We have one directory with different files. We have one adapter for every file( we need for the content conversion ) using NFS and all the adapters are pointing to the same directory.
The problem is that if we have files A.txt, B.txt and C.txt we need to process in an order.
And the problem we see is that for every file we have one adapter, so for example if we process file A.txt with one adapter, when this part is finished, we want to process file B.txt with another adapter, and the same for the rest of the files.
So the idea we had is to create another directories, and when A.txt has finished move file B.txt to another directory.
However this way is not running, if we log on the PI machine and execute cmd, we can do a copy of one file from one directory to another, but when we put this sentence in the adapter in OS command if we see the adapter log we see an error executing the OS command, but we don't know what is the error, there is no more information.
There is any way to do this or maybe we have to manage in a different way?
Many thanks in advance.
Regards,
Xavi.

File conversion in a file adapter

Hi
I am using a FTP file adapter to place the file in the ftp servers.
The structure of the file is
<?xml version="1.0" encoding="UTF-8" ?>
- <p2:MT_Cust xmlns:p2="http://RashidaBPM">
<Cust_no>KRTEST2</Cust_no>
<Cust_Name>XI CUSTOMER 2</Cust_Name>
<Cust_Address>GB</Cust_Address>
</p2:MT_Cust>
I want the resulta to come in as cust_no , cust_name, cust_address
Can someone please help me to get the centent conversion parameters correct to get the desired result
Thanks
Nikhil

Hi Nikhil,
To convert a XML file into a flat file you need to have a Stucture of the XML file like this one mentioned below:
<root>
<substructure>
<data>
</data>
</substructure>
<root>
By XML I mean the input data, that will be routed from XI server to FTP servers.
now the parameters to be given in Content Conversion Tab and which are of utmost importance are:
substructure.fieldSeparator
root.fieldSeparator
substructure.endSeparator
you can also use the methods such as fieldFixedLengths etc.
Include these methods and test your scenario again.
I hope it helps,
Thanks & Regards,
Varun Joshi

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

Archiving faulty Source file not working in Sender Adapter FCC

Hi Experts,
I have enabled "Archiving Faulty Source File" in Sender Adapter FCC and pen down the directory path accordingly.
Likewise I also enable the processed mode as "archive" and give it the direcotory path.
However when there is a error flagged in sxmb_moni for this interface, I unable to see any file created in the error folder but I can see a file with timestamp being created in the archive folder.
I have checked the access right to the directory, so this is not an issue. I ran through the forum on this subject and come across the help.sap note on the following
" To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: MessageTransformBean, Migrating Dispatcher Classes
○ Specify the Directory for Error Archiving.
○ To add a time stamp to the archived file, select Add Time Stamp. "
What is the definition as "permanent error". The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
Anyone have any such setting enabled and working ?
Regards
FNG

The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
No, it is not the case. As mentioned on the SAP Help site, for the faulty file to be archived, the error has to occur in content conversion, or in module processor.
If the error you are getting is in MONI, then it means syntactically the file is correct and hence adapter engine has picked up and sent to integration engine (SXMB_MONI).
-Supriya.

File Cant be Overwritten--File Adapter

Similar Messages

Maybe you are looking for