File CC issue

hi,
let me explain the case:
file will come as leading zero's or leading spaces and level as key field under Header to identify header, detail sections.
i'm done with configuration in FCC for leading space by putting (key value) Level as " 1" and PI is converting and xml shows as "Level=0"
however when i did same FCC for leading zero's as "00001" and PI is converting xml as "LEvel=00000".
note : target having one header so i did some logic in PI.
however FCC parameters as
Header,1,HEader,1 . ( for 2 cases )
i've 2 issues here. am not able to generate Header section if its leading zero's and xml conversion for level is similar to the field whcih is passing by ERP, but with leading spaces its creating header and level as "0" truncating all spaces.
Is my configuration is wrong or what might be the issue with leading zero's as PI is converting XML similar to source value.

Hi Aman,
You can use "NameA.fieldContentFormatting = nothing" that may help you
for more information plz check
Converting File Content in a Sender Adapter (SAP Library - Partner Connectivity Kit)
Regards
GB

Similar Messages

PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get Photoshop CS3 error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Adobe Bridge at all. What am I doing wrong?

Hey,
Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs with Bridge or PS CS3.
This method wont involve any additional software purchase now.. right? Am I missing anything. here? Since my final output to my customers are JPEGs any way, wont this work? Will I be at any disadvantage. Am I missing anything. here?
From: ssprengel <[email protected]>
To: charles cash <[email protected]>
Sent: Monday, October 6, 2014 9:49 AM
Subject: PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue created by ssprengel in Adobe Camera Raw - View the full discussion
You can buy it from here:
http://creative.adobe.com/plans
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

SQL Server 2008 .MDF File attaching issue

Hy all guys here is big Happy news about the SQL Server 2008 database.mdf file attaching issue on Windows 8.1 and SQL Server 2008
I found the solution like this
first you go to the directory of your computer and go to that folder where your database and other files are like
folder having database and files then > Right click and > security > then give full rights from which user you LOGIN and then apply > ok after that go to SQL Server 2008 > Right Click > run as administrator
Hurray your problem will be resolve I Resolved my issue too thanks to providing every solution
if you guys find solution please give me best regards thanks

Hi Farhan-Islam,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing which will help other forum members who have the similar issue.
Regards,
Lydia Zhang

Recording File Size issue CS 5.5

I am using CS 5.5, a Balckmagic Ultra Studio Pro through USB 3.0 being fed by a Roland HD Video switcher. Everything is set for 720P 60fps (59.94) and the Black Magic is using the Motion JPEG compression. I am trying to record our sermons live onto a Windows 7 machine with an Nvidia Ge-Force GTX 570, 16 GB of Ram and a 3TB internal raid array (3 drives). It usually works great but more often now when I push the stop button in the capture window, the video is not proceesed and becomes unusable. Is it a file size issue or what. I get nervous when my recording goes longer than 50 Minutes. Help

Jim thank you for the response. I have been away and busy but getting
caught up now.
I do have all drives formatted as NTFS. My problem is so sporadic that I
can not get a pattern down. This last Sunday recorded fine so we will see
how long it last. Thanks again.

All of a sudden File compatability issues with IPhoto & digital camera

Anyone have issues or solutions for solving file compatability issues with IPhoto & digital camera? Worked okay for years but all of a sudden giving me error messages about file format. My camera uses Jpeg.

There is an issue ongoing between 10.6 and Kodak cameras. Workround: use a USB Card Reader.
Regards
TD

I am having a file moving issue with Adobe Reader XI

I am having a file moving issue with Adobe Reader XI on a Windows 7 32bit system. When Adobe reader is set as the default program for PDF files moving files from one directory to another takes over a minute, regardless of the size of the file. When the default handler is set to another program, like Nuance or PDF Creator, this is instant. What in Adobe Reader is causing this and what can I do to speed up file moving? Any help will be greatly appreciated. Thank you.

I am using Windows 7 home edition and using Internet Explorer 10
The PDF's are online on websites that I am trying to open. Both on the site as well as trying in a new window.
Thank you
Jeff

Windows Update Helps with File Size Issues?

I'm just wondering if anybody has recently noticed an
improvement related to the file size issue variously reported
throughout the forums?
I ask because our IT folks distributed a Windows update on 2
days last week and since the application of those updates I have
not experienced the freakishly large file sizes and the related
performance issues in Captivate. Unfortunately I don't have any of
the details of what patch(es) were installed, as it was part of our
boot script one morning and I didn't even realize it was updating
until I received the Reboot Now or Later alert.
Anyway, I was curious because I have experienced significant
performance improvement since then.
Rory

If you are using a remote workflow ... designers are sending off-site editors InCopy Assignment packages (ICAPs) .... then they need to create assignments in order to package them for the remote InCopy user. So there's no need to split up a layout into smaller files or anything. An assignment is a subset of the INDD file; multiple assignments -- each encompassing different pages or sections -- are created from the same INDD file.
When the designer creates the assignment, have them turn off "Include original images in packages"; that should keep the file size down.
Or -- like Bob said -- you can avoid the whole remote workflow/assignment package rigamarole all together by just keeping the file in a project folder in the Dropbox folder on teh designer's local hard drive, and have them share the project folder with the editors. In that workflow, editors open the INDD file on their local computer and check out stories, just as though they were opening them from a networked file server.
I cover how the InCopy Dropbox workflow works in a tutorial video (within the Remote Workflows chapter) on Lynda.com here:
http://www.lynda.com/tutorial/62220
AM

E4200V2 file corruption issues

Hello,
I am getting file corruption issues when doing a file transfer onto the NAS (hard drive plugged into the router). Files are turned into folders while keeping the same filename. It happens occasionally.
I have firmware: 2.1.39.145204 installed.
Any remedy for this as it is a very serious problem.

The only known solution is to call linksys and ask them for a replacement router model that does not contain the bug. See thread link for details.
http://community.linksys.com/t5/Wireless-Routers/Media-files-changing-to-folder-types/td-p/504192/hi...

CC application file sync issue and CC App broken menu..

1. File sync from Photoshop CC has stopped working.
Photoshop reports the last sync time and date in edit>sync settings.
However in my Application settings I get the following..
Application settings are synced between many of your favorite desktop applications and Creative Cloud, allowing you to work consistently from any machine. To begin syncing, you will need to open your desktop application and click "Sync Settings Now".
You currently do not have any synced settings.
2. I have missing menu items in the CC app cog menu (I assume as reported on other threads) including "stop syncing", preferences/settings and other blank or greyed out items.
Prior to that I had the also reported dead CC app issue and uninstalled and reinstalled the app, which fixed dead app but left the munu broken.

Hallo over there
After using creative cloud cleaner ....
every things is ok...8-)
Sendt fra mobilen....
Med venlig hilsen/Kind regards
Fotograf Hans Søndergaard
Allégade 23 1.baghus
DK 2000 Frederiksberg
M: +45 4044 8190
[email protected]
www.soendergaard.com
Den 07/11/2013 kl. 17.32 skrev Simon_P1 <[email protected]>:
Re: CC application file sync issue and CC App broken menu..
created by Simon_P1 in Adobe Creative Cloud - View the full discussion
Since the CC app messed up again and yet another reinstall, it is working (sort of, after several sync failures of lrcat) properly, including the menu, all be it very slowly considering the fast upload I have.
As is the setting sync finally.
Thanks for keeping me informed, oh wait, you didn't!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5823499#5823499
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5823499#5823499
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5823499#5823499. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

DMS Original File Display issue

Hello All,
This is regarding Original File dispaly issue in DMS. User is using CV04N transaction to download the file. After going in the DMS screen user is selecting the file, Right Click & select the option "Copy to". Then user select the option to save the file on Desktop. If required user change the description of the file & save it on Desktop.
But when he tries to open that file from the desktop, file is not diaplayed & does not give any error. In some cases file is taking more than 10 mins to open the file.
This issue is faced by only two users whereas on my laptop file is displayed properly without any issue.
What could be the reason behind this? Waiting for your valuable reply.
Thanks
Pravin

Hi,
As it happens after saving the file it si probably the local system issue.Please check if the application is not corrupt or you are using the latest version of the same.
Thanks
Amulya

HT1338 My fuji x100s has RAW file compatibility issue with OS 10.8.2

My fuji x100s has RAW file compatibility issue with OS 10.8.2, my iphoto11 cannot recognise the file format. Anyone know of this issue too? Appreciate if anyone can offer some helps. Thanks

Correct. The Fuji X-100s is not currently supported by iPhoto or Aperture (or the RAW converter in OS X itself). You can submit feedback via iPhoto and request this.

File formatting issues when saving PDF as PPTX in Acrobat XI Pro

Hi guys,
I have some issues when I'm saving my PDF (initially comming from InDesign) as PPTX. The format is suddenly changing, leaving a blank zone, and some of the pages are rotated.
Is it a problem comming from the Indesign or from the Acrobat options itself? I have already tried changing the chekboxes in the option box when I'm saving, but nothing worked.
If someone has an idea how to fix that, i would be very grateful! Thanks in advance

Which dot version of Acrobat XI are you currently using in your export? Is the PDF file tagged? If not, then you may want to tag the PDF file before exporting it.

Creative Cloud Files – Syncing issues/Bandwidth hogging – Does it ever work?

Having been a Dropbox user for several years I was keen to start using the 100gb of Creative Cloud storage to enable me to work on a project from home and pick up where I left off in the office.
However it simply doesn't work properly!
For example:
I worked from home on Monday and Tuesday on a project. All the files were successfully uploaded from my home Mac within seconds/minutes. I came into work on Wednesday and the files had not appeared in my CC Files folder. I rebooted my Mac and paused and restarted the sync and left it running, a couple of the files appeared but the process seems to hang fairly quickly. I've left it running overnight and my files have still not synced! the status bar at the bottom of the CC app shows "Syncing file 7 of 181 (9hr left)" but it never gets any further.
When syncing is switched on and running the process kills all the bandwidth of my work Mac causing outgoing emails to spend up to an hour in my outgoing mail queue, slowing web browsing to a crawl, hampering any other web usage/downloads/streaming/remote access etc. To prevent this I changed the preferences to only allow CC 50% of the available upload and download bandwidth.
I have repeatedly logged out/rebooted my Mac, closed and relaunched the CC app, paused and restarted the sync process and run the
rm ~/Library/Application\ Support/Adobe/CoreSync/options.tix
command in Terminal as suggested in another thread.
The files I am syncing are not even that large, in total I am only using around 3% of my storage.
Am I on my own in experiencing these issues? Or are other people suffering too?

Hi Matt,
In order for us to take a deeper look at what's happening here, we would need to take a look at the log files on both your machines. The location of the coresync.log file is included below.
Could you also tell me what version of the Creative Cloud Desktop app you're using (from preferences) and the spec of the Macs?
Log file location:
Mac - /Library/Application Support/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
(On Mac, you need to use the Go To Folder option from the Go option in Finder (menu at the top). Then in the pop up enter:
/users/username/Library/Application Support/Adobe/CoreSync/
Then select go, this will take you to the folder containing the .log files.)
Please email this to me directly on [email protected]

Content Tracker Reports Query file modification issue - Custom Report

Hi All,
I was trying to generate a custom report using Content Tracker. I was successful in doing so. However, I found that sometimes it does not pick up the updated query file of Content Tracker reports.
I made a change in my query:
from SELECT * FROM Users to
SELECT dname FROM Users
the change is written on the file but when i generated the report from C.T. UI, it's still showing me the old results having all the columns. Tried bouncing the server as well, but no use.
I also added a new query 24 hrs back (as SELECT count(*) As UsersNum FROM Users), it's still not recognizing it and giving error as Failure of server APACHE bridge: No backend server available for
connection: timed out after 10 seconds or idempotent set to OFF;
and the log says,
Unable to execute service SCT_GET_DOCUMENT_INFO_ADMIN and function sctExecuteQuery.
Unable to create the result set for query '(null)'. SQL statement to execute cannot be empty or null
What could be the resolution of this issue?
I am using UCM 11g + SSXA.

Server bounce.
Issue is not file update but some other issue, ongoing in another thread by Me.

Using Signal Express VI for DAQmx, timing & file size issues

I am using a Signal Express VI with my DAQmx. Long story short, my DAQmx VI's don't work in LV 8.6 (possibly IT installation error). I have a few issues (I'm a beginner so be easy).
First, I'm confused on how to get the timing correct. I am trying to read a 100 samples (2 channels) average them and repeat this at 30Hz and record this data.
Second, everytime I open the Signal Express VI (in my block diagram) and change sampling for example, click OK, then save my VI before running my program. I noticed the file on disk increased in size by the megabytes! All I changed were the sampling settings.
I appreciate any input, thanks in advance!
-Michal
Attachments:
Philtec_09-22-09.vi ‏2589 KB

To your first concern, it sounds like DAQmx was installed before LabVIEW. Just reinstall DAQmx and it will work fine in LabVIEW.
For you second concern. To get 100 Samples at 30 Hz, you will need to change your channel setup in signal express. You will need Continuous Aquisition, with 100 Samples to Read at 3000 Hz. Then you code should work as expected.
Chris Bakker
National Instruments
Applications Engineer
Check out LabVIEW 2009 and the New X-series DAQ!

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

File CC issue

Similar Messages

Maybe you are looking for