File Compression and FIle Conversion in FCE4

Hey All,
I just purchased FCE4 and being the novice that I am, it took me a little while to understand why I kept getting the dreaded "file unknown" errors. I have since figured that out and have figured out how to convert/import files into FCE4.
Now the tough part...
I have already started a project and have been cutting old VHS-to-DVD-Ripped from Handbrake into Quicktime movies.
I guess I saved them in the wrong format/frame rate or something (even though they are .mov) and now am faced with the task of going through 200 clips and exporting/converting into different formats. IS THERE ANY METHOD/PROGRAM where I can just select all of these and convert/export them in the correct format?
Doing them one by one will take weeks...
Additionally, since the new files are bigger, when I am exporting from FCE4 to iDVD, does the compression of these files to fit on a DVD seriously affect the quality? The movie will DEFINITELY be over the standard 4.3 Gigs and its already a compilation of home movies so I don't want to destroy the quality too much.
Any help is greatly appreciated! Thank You!

There will be quite a bit of degradation of already degrade material. Handbrake unfortunately was not the right tool to use. You'd be best off going back to the DVDs and using MPEG Streamclip to rip them to QuickTime using the DV NTSC codec at 29.97fps.

Similar Messages

File path and file name?

hi could anyone give code for filename and file path name from application and presentation server....
I need to give file name and file path on selection screen for both the servers....

Hi Abhay,
Refer to the below code:
*& Report ZHYPERION                                                   *
*& Project : SubSea7
Created on : 07/02/2007
Created by : Puneet Jhari.
*& Purpose : For SAP Interface download Hyperion.
REPORT zhyperion NO STANDARD PAGE HEADING MESSAGE-ID zhyper.
Start of Data Declaration
TYPE-POOLS : truxs,vrm.
TABLES : glpct,cepc.
DATA : var TYPE i,
        total TYPE f.
DATA : BEGIN OF wa2,
       ryear LIKE glpct-ryear,
       rbukrs LIKE glpct-rbukrs,
       racct LIKE glpct-racct,
       ksl01 LIKE glpct-ksl01,
       END OF wa2.
DATA : BEGIN OF wa3,
       ryear LIKE glpct-ryear,
       rbukrs LIKE glpct-rbukrs,
       racct LIKE glpct-racct,
       ksl01 LIKE glpct-ksl01,
       END OF wa3.
DATA : BEGIN OF wa4,
       racct LIKE glpct-racct,
       END OF wa4.
DATA : BEGIN OF wa5,
       rbukrs LIKE glpct-rbukrs,
       racct LIKE glpct-racct,
       total1(8) TYPE p DECIMALS 2,
       END OF wa5.
DATA : BEGIN OF wa9,
       khinr LIKE cepc-khinr,
       racct LIKE glpct-racct,
       total1(8) TYPE p DECIMALS 2,
       END OF wa9.
DATA : BEGIN OF wa6,
       khinr LIKE cepc-khinr,
       prctr LIKE cepc-prctr,
       rprctr LIKE glpct-rprctr,
       ryear LIKE glpct-ryear,
       rbukrs LIKE glpct-rbukrs,
       racct LIKE glpct-racct,
       ksl01 LIKE glpct-ksl01,
       END OF wa6.
DATA : BEGIN OF wa7,
       khinr LIKE cepc-khinr,
       prctr LIKE cepc-prctr,
       rprctr LIKE glpct-rprctr,
       ryear LIKE glpct-ryear,
       rbukrs LIKE glpct-rbukrs,
       racct LIKE glpct-racct,
       ksl01 LIKE glpct-ksl01,
       END OF wa7.
DATA : itab3 LIKE TABLE OF wa2,
       itab4 LIKE TABLE OF wa3,
       itab5 LIKE TABLE OF wa4 WITH HEADER LINE,
       itab6 LIKE TABLE OF wa5 WITH HEADER LINE,
       itab7 LIKE TABLE OF wa6,
       itab8 LIKE TABLE OF wa7,
       itab10 LIKE TABLE OF wa9.
DATA : flag(1) TYPE c,
       temp(6) TYPE c.
DATA : itab2 TYPE truxs_t_text_data,
       itab9 TYPE truxs_t_text_data WITH HEADER LINE.
DATA : name TYPE vrm_id,
       list TYPE vrm_values,
       value LIKE LINE OF list,
       FILNAM11 TYPE STRING,
       FILNAM21 TYPE STRING.
End of Data Declaration
Begin of Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: r1 DEFAULT 'X' RADIOBUTTON GROUP g1 USER-COMMAND rad1,
r2 RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS: rbukrs1 TYPE glpct-rbukrs MODIF ID ful,
            khinr1 TYPE cepc-khinr AS LISTBOX VISIBLE LENGTH 20
            MODIF ID sam ,
            ryear1 TYPE glpct-ryear MODIF ID ful,
            ryear2 TYPE glpct-ryear MODIF ID sam,
            rpmax1 TYPE i MODIF ID ful,
            rpmax2 TYPE i MODIF ID sam,
            filnam1 TYPE rlgrap-filename MODIF ID ful,
            filnam2 TYPE RLGRAP-FILENAME MODIF ID sam.
SELECTION-SCREEN END OF BLOCK b3.
End of Selection Screen
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM populate.          "For populating the drop-down list.
CLEAR VALUE.
REFRESH LIST.
NAME = 'KHINR1'.
VALUE-KEY = '1S7_NOCASV'.
VALUE-TEXT = '1S7_NOCASV'.
APPEND VALUE TO LIST.
VALUE-KEY = '1S7_NOCJOT'.
VALUE-TEXT = '1S7_NOCJOT'.
APPEND VALUE TO LIST.
LOOP AT SCREEN.            "For toggling between the selection screens.
    IF r1 EQ 'X'.
      IF screen-group1 = 'SAM'.
        screen-active = 0.
      ENDIF.
    ELSEIF r2 EQ 'X'.
      IF screen-group1 = 'FUL'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
For the Drop-Down Listbox
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id                    = name
      values                = list
EXCEPTIONS
ID_ILLEGAL_NAME       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Begin of Data Selection
START-OF-SELECTION.
When Company Code radio button is selected.
IF r1 EQ 'X'.            "If Company Code radio button is selected.
    IF rbukrs1 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF rpmax1 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF ryear1 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF filnam1 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
MOVE FILNAM1 TO FILNAM11.
    CASE rpmax1.
      WHEN '01'.
        SELECT ryear rbukrs racct ksl01
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '02'.
        SELECT ryear rbukrs racct ksl02
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '03'.
        SELECT ryear rbukrs racct ksl03
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '04'.
        SELECT ryear rbukrs racct ksl04
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '05'.
        SELECT ryear rbukrs racct ksl05
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '06'.
        SELECT ryear rbukrs racct ksl06
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '07'.
        SELECT ryear rbukrs racct ksl07
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '08'.
        SELECT ryear rbukrs racct ksl08
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '09'.
        SELECT ryear rbukrs racct ksl09
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '10'.
        SELECT ryear rbukrs racct ksl10
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '11'.
        SELECT ryear rbukrs racct ksl11
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '12'.
        SELECT ryear rbukrs racct ksl12
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '13'.
        SELECT ryear rbukrs racct ksl13
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '14'.
        SELECT ryear rbukrs racct ksl14
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '15'.
        SELECT ryear rbukrs racct ksl15
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
      WHEN '16'.
        SELECT ryear rbukrs racct ksl16
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
    ENDCASE.
    MOVE itab3 TO itab4.
    LOOP AT itab3 INTO wa2.
      flag = 0.
      LOOP AT itab5 INTO wa4.
        IF wa2-racct EQ wa4-racct.
          flag = 1.
          EXIT.
        ENDIF.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM itab5.
      IF flag = 1.
        CONTINUE.
      ENDIF.
      LOOP AT itab4 INTO wa3.
        IF wa2-rbukrs EQ wa3-rbukrs AND wa2-racct EQ wa3-racct AND
        wa2-ryear EQ wa3-ryear.
          total = total + wa3-ksl01.
        ENDIF.
      ENDLOOP.
      wa5-rbukrs = wa2-rbukrs.
      wa5-racct = wa2-racct+4(6).
      wa5-total1 = total.
      APPEND wa5 TO itab6.
      CLEAR total.
      APPEND wa2-racct TO itab5.
    ENDLOOP.
If no data is available corresponding to the values entered.
    IF itab6[] IS INITIAL.
      MESSAGE i003.
    ENDIF.
For making the file Comma separated
    CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
      EXPORTING
        i_field_seperator          = ','
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
      TABLES
        i_tab_sap_data             = itab6
     CHANGING
       i_tab_converted_data       = itab2
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
For downloading it to the Presentation Server
   MOVE itab2[] TO itab9[].
   OPEN DATASET filnam1 FOR OUTPUT IN LEGACY TEXT MODE.
   LOOP AT itab9.
     TRANSFER itab9 TO filnam1.
   ENDLOOP.
   CLOSE DATASET filnam1.
   IF sy-subrc EQ 0.
     MESSAGE s004.
   ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    filename                        = FILNAM11
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
IMPORTING
FILELENGTH                      =
tables
    data_tab                        = itab2
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When Region radio button is selected.
ELSEIF r2 EQ 'X'.
    IF khinr1 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF rpmax2 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF ryear2 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
    IF filnam2 IS INITIAL.
      MESSAGE i002.
      LEAVE TO SCREEN 1000.
    ENDIF.
MOVE FILNAM2 TO FILNAM21.
    CASE rpmax2.
      WHEN '01'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl01
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '02'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl02
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '03'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl03
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '04'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl04
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '05'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl05
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '06'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl06
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '07'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl07
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '08'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl08
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '09'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl09
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '10'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl10
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '11'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl11
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '12'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl12
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '13'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl13
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '14'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl14
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '15'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl15
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
      WHEN '16'.
       SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl16
       INTO CORRESPONDING FIELDS OF TABLE itab7
       FROM ( glpct AS g
               INNER JOIN cepc AS c ON grprctr = cprctr )
       WHERE c~khinr = khinr1 AND
             g~ryear = ryear2.
    ENDCASE.
    MOVE itab7 TO itab8.
    LOOP AT itab7 INTO wa6.
      flag = 0.
      LOOP AT itab5 INTO wa4.
        IF wa6-racct EQ wa4-racct.
          flag = 1.
          EXIT.
        ENDIF.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM itab5.
      IF flag = 1.
        CONTINUE.
      ENDIF.
      LOOP AT itab8 INTO wa7.
        IF wa6-rbukrs EQ wa7-rbukrs AND wa6-racct EQ wa7-racct AND
        wa6-ryear EQ wa7-ryear.
          total = total + wa7-ksl01.
        ENDIF.
      ENDLOOP.
      wa9-khinr = khinr1.
      wa9-racct = wa6-racct+4(6).
      wa9-total1 = total.
      APPEND wa9 TO itab10.
      CLEAR total.
      APPEND wa6-racct TO itab5.
    ENDLOOP.
*If no data is available corresponding to the values entered.
    IF itab10 IS INITIAL.
      MESSAGE i003.
    ENDIF.
For making the file Comma separated
    CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
      EXPORTING
        i_field_seperator          = ','
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
      TABLES
        i_tab_sap_data             = itab10
     CHANGING
       i_tab_converted_data       = itab2
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
For downloading it to the Presentation Server
   MOVE itab2[] TO itab9[].
   OPEN DATASET filnam2 FOR OUTPUT IN LEGACY TEXT MODE.
   LOOP AT itab9.
     TRANSFER itab9 TO filnam2.
   ENDLOOP.
   CLOSE DATASET filnam2.
   IF sy-subrc EQ 0.
     MESSAGE s004.
   ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    filename                        = FILNAM21
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
IMPORTING
FILELENGTH                      =
tables
    data_tab                        = itab2
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*&      Form POPULATE
      text
FORM populate.
CLEAR value.
REFRESH list.
name = 'KHINR1'.
value-key = '1S7_SUBSEA'.
value-text = '1S7_SUBSEA'.
APPEND value TO list.
value-key = '1S7_GEN'.
value-text = '1S7_GEN'.
APPEND value TO list.
value-key = '1S7'.
value-text = '1S7'.
APPEND value TO list.
value-key = '1S7_CORPTP'.
value-text = '1S7_CORPTP'.
APPEND value TO list.
value-key = '1S7_BRRE'.
value-text = '1S7_BRRE'.
APPEND value TO list.
value-key = '1S7_BRCON'.
value-text = '1S7_BRCON'.
APPEND value TO list.
value-key = '1S7_BRCJOB'.
value-text = '1S7_BRCJOB'.
APPEND value TO list.
value-key = '1S7_BRCJBU'.
value-text = '1S7_BRCJBU'.
APPEND value TO list.
value-key = '1S7_BRCJCO'.
value-text = '1S7_BRCJCO'.
APPEND value TO list.
value-key = '1S7_BRCJIR'.
value-text = '1S7_BRCJIR'.
APPEND value TO list.
value-key = '1S7_BRCJEN'.
value-text = '1S7_BRCJEN'.
APPEND value TO list.
value-key = '1S7_BRCJPI'.
value-text = '1S7_BRCJPI'.
APPEND value TO list.
value-key = '1S7_BRCJSU'.
value-text = '1S7_BRCJSU'.
APPEND value TO list.
value-key = '1S7_BRCJFL'.
value-text = '1S7_BRCJFL'.
APPEND value TO list.
value-key = '1S7_BRCJOT'.
value-text = '1S7_BRCJOT'.
APPEND value TO list.
value-key = '1S7_BRCASV'.
value-text = '1S7_BRCASV'.
APPEND value TO list.
value-key = '1S7_BRCASE'.
value-text = '1S7_BRCASE'.
APPEND value TO list.
value-key = '1S7_BRCOOC'.
value-text = '1S7_BRCOOC'.
APPEND value TO list.
value-key = '1S7_BRCOHD'.
value-text = '1S7_BRCOHD'.
APPEND value TO list.
value-key = '1S7_BRCGEN'.
value-text = '1S7_BRCGEN'.
APPEND value TO list.
value-key = '1S7_BRDRI'.
value-text = '1S7_BRDRI'.
APPEND value TO list.
value-key = '1S7_BRDJOB'.
value-text = '1S7_BRDJOB'.
APPEND value TO list.
value-key = '1S7_BRDASV'.
value-text = '1S7_BRDASV'.
APPEND value TO list.
value-key = '1S7_BRDASE'.
value-text = '1S7_BRDASE'.
APPEND value TO list.
value-key = '1S7_BRDAEW'.
value-text = '1S7_BRDAEW'.
APPEND value TO list.
value-key = '1S7_BRDAEO'.
value-text = '1S7_BRDAEO'.
APPEND value TO list.
value-key = '1S7_BRDAET'.
value-text = '1S7_BRDAET'.
APPEND value TO list.
value-key = '1S7_BRDOOC'.
value-text = '1S7_BRDOOC'.
APPEND value TO list.
value-key = '1S7_BRDOHD'.
value-text = '1S7_BRDOHD'.
APPEND value TO list.
value-key = '1S7_BRVER'.
value-text = '1S7_BRVER'.
APPEND value TO list.
value-key = '1S7_BRVJOB'.
value-text = '1S7_BRVJOB'.
APPEND value TO list.
value-key = '1S7_BRVASV'.
value-text = '1S7_BRVASV'.
APPEND value TO list.
value-key = '1S7_BRVASE'.
value-text = '1S7_BRVASE'.
APPEND value TO list.
value-key = '1S7_BRVOOC'.
value-text = '1S7_BRVOOC'.
APPEND value TO list.
value-key = '1S7_BRVOHD'.
value-text = '1S7_BRVOHD'.
APPEND value TO list.
value-key = '1S7_UKRE'.
value-text = '1S7_UKRE'.
APPEND value TO list.
value-key = '1S7_UKCON'.
value-text = '1S7_UKCON'.
APPEND value TO list.
value-key = '1S7_UKCJOB'.
value-text = '1S7_UKCJOB'.
APPEND value TO list.
value-key = '1S7_UKCJBU'.
value-text = '1S7_UKCJBU'.
APPEND value TO list.
value-key = '1S7_UKCJCO'.
value-text = '1S7_UKCJCO'.
APPEND value TO list.
value-key = '1S7_UKCJIR'.
value-text = '1S7_UKCJIR'.
APPEND value TO list.
value-key = '1S7_UKCJEN'.
value-text = '1S7_UKCJEN'.
APPEND value TO list.
value-key = '1S7_UKCJPI'.
value-text = '1S7_UKCJPI'.
APPEND value TO list.
value-key = '1S7_UKCJSU'.
value-text = '1S7_UKCJSU'.
APPEND value TO list.
value-key = '1S7_UKCJFL'.
value-text = '1S7_UKCJFL'.
APPEND value TO list.
value-key = '1S7_UKCJOT'.
value-text = '1S7_UKCJOT'.
APPEND value TO list.
value-key = '1S7_UKCASV'.
value-text = '1S7_UKCASV'.
APPEND value TO list.
value-key = '1S7_UKCASE'.
value-text = '1S7_UKCASE'.
APPEND value TO list.
value-key = '1S7_UKCOOC'.
value-text = '1S7_UKCOOC'.
APPEND value TO list.
value-key = '1S7_UKBA'.
value-text = '1S7_UKBA'.
APPEND value TO list.
value-key = '1S7_UKBATE'.
value-text = '1S7_UKBATE'.
APPEND value TO list.
value-key = '1S7_UKCOHD'.
value-text = '1S7_UKCOHD'.
APPEND value TO list.
value-key = '1S7_UKCGEN'.
value-text = '1S7_UKCGEN'.
APPEND value TO list.
value-key = '1S7_UKDRI'.
value-text = '1S7_UKDRI'.
APPEND value TO list.
value-key = '1S7_UKDJOB'.
value-text = '1S7_UKDJOB'.
APPEND value TO list.
value-key = '1S7_UKDASV'.
value-text = '1S7_UKDASV'.
APPEND value TO list.
value-key = '1S7_UKDASE'.
value-text = '1S7_UKDASE'.
APPEND value TO list.
value-key = '1S7_UKDAEW'.
value-text = '1S7_UKDAEW'.
APPEND value TO list.
value-key = '1S7_UKDAEO'.
value-text = '1S7_UKDAEO'.
APPEND value TO list.
value-key = '1S7_UKDAET'.
value-text = '1S7_UKDAET'.
APPEND value TO list.
value-key = '1S7_UKDOOC'.
value-text = '1S7_UKDOOC'.
APPEND value TO list.
value-key = '1S7_UKDOHD'.
value-text = '1S7_UKDOHD'.
APPEND value TO list.
value-key = '1S7_UKVER'.
value-text = '1S7_UKVER'.
APPEND value TO list.
value-key = '1S7_UKVJOB'.
value-text = '1S7_UKVJOB'.
APPEND value TO list.
value-key = '1S7_UKVASV'.
value-text = '1S7_UKVASV'.
APPEND value TO list.
value-key = '1S7_UKVASE'.
value-text = '1S7_UKVASE'.
APPEND value TO list.
value-key = '1S7_UKVOOC'.
value-text = '1S7_UKVOOC'.
APPEND value TO list.
value-key = '1S7_UKVOHD'.
value-text = '1S7_UKVOHD'.
APPEND value TO list.
value-key = '1S7_NORE'.
value-text = '1S7_NORE'.
APPEND value TO list.
value-key = '1S7_NOCON'.
value-text = '1S7_NOCON'.
APPEND value TO list.
value-key = '1S7_NOCJOB'.
value-text = '1S7_NOCJOB'.
APPEND value TO list.
value-key = '1S7_NOCJBU'.
value-text = '1S7_NOCJBU'.
APPEND value TO list.
value-key = '1S7_NOCJCO'.
value-text = '1S7_NOCJCO'.
APPEND value TO list.
value-key = '1S7_NOCJIR'.
value-text = '1S7_NOCJIR'.
APPEND value TO list.
value-key = '1S7_NOCJEN'.
value-text = '1S7_NOCJEN'.
APPEND value TO list.
value-key = '1S7_NOCJPI'.
value-text = '1S7_NOCJPI'.
APPEND value TO list.
value-key = '1S7_NOCJSU'.
value-text = '1S7_NOCJSU'.
APPEND value TO list.
value-key = '1S7_NOCJFL'.
value-text = '1S7_NOCJFL'.
APPEND value TO list.
value-key = '1S7_NOCJOT'.
value-text = '1S7_NOCJOT'.
APPEND value TO list.
value-key = '1S7_NOCASV'.
value-text = '1S7_NOCASV'.
APPEND value TO list.
value-key = '1S7_NOCASE'.
value-text = '1S7_NOCASE'.
APPEND value TO list.
value-key = '1S7_NOCOOC'.
value-text = '1S7_NOCOOC'.
APPEND value TO list.
value-key = '1S7_NOCOHD'.
value-text = '1S7_NOCOHD'.
APPEND value TO list.
value-key = '1S7_NOCGEN'.
value-text = '1S7_NOCGEN'.
APPEND value TO list.
value-key = '1S7_NODRI'.
value-text = '1S7_NODRI'.
APPEND value TO list.
value-key = '1S7_NODJOB'.
value-text = '1S7_NODJOB'.
APPEND value TO list.
value-key = '1S7_NODASV'.
value-text = '1S7_NODASV'.
APPEND value TO list.
value-key = '1S7_NODASE'.
value-text = '1S7_NODASE'.
APPEND value TO list.
value-key = '1S7_NODAEW'.
value-text = '1S7_NODAEW'.
APPEND value TO list.
value-key = '1S7_NODAEO'.
value-text = '1S7_NODAEO'.
APPEND value TO list.
value-key = '1S7_NODAET'.
value-text = '1S7_NODAET'.
APPEND value TO list.
value-key = '1S7_NODOOC'.
value-text = '1S7_NODOOC'.
APPEND value TO list.
value-key = '1S7_NODOHD'.
value-text = '1S7_NODOHD'.
APPEND value TO list.
value-key = '1S7_NOVER'.
value-text = '1S7_NOVER'.
APPEND value TO list.
value-key = '1S7_NOVJOB'.
value-text = '1S7_NOVJOB'.
APPEND value TO list.
value-key = '1S7_NOVASV'.
value-text = '1S7_NOVASV'.
APPEND value TO list.
value-key = '1S7_NOVASE'.
value-text = '1S7_NOVASE'.
APPEND value TO list.
value-key = '1S7_NOVOOC'.
value-text = '1S7_NOVOOC'.
APPEND value TO list.
value-key = '1S7_NOVOHD'.
value-text = '1S7_NOVOHD'.
APPEND value TO list.
value-key = '1S7_GORE'.
value-text = '1S7_GORE'.
APPEND value TO list.
value-key = '1S7_GOCON'.
value-text = '1S7_GOCON'.
APPEND value TO list.
value-key = '1S7_GOCJOB'.
value-text = '1S7_GOCJOB'.
APPEND value TO list.
value-key = '1S7_GOCJBU'.
value-text = '1S7_GOCJBU'.
APPEND value TO list.
value-key = '1S7_GOCJCO'.
value-text = '1S7_GOCJCO'.
APPEND value TO list.
value-key = '1S7_GOCJIR'.
value-text = '1S7_GOCJIR'.
APPEND value TO list.
value-key = '1S7_GOCJEN'.
value-text = '1S7_GOCJEN'.
APPEND value TO list.
value-key = '1S7_GOCJPI'.
value-text = '1S7_GOCJPI'.
APPEND value TO list.
value-key = '1S7_GOCJSU'.
value-text = '1S7_GOCJSU'.
APPEND value TO list.
value-key = '1S7_GOCJFL'.
value-text = '1S7_GOCJFL'.
APPEND value TO list.
value-key = '1S7_GOCJOT'.
value-text = '1S7_GOCJOT'.
APPEND value TO list.
value-key = '1S7_GOCASV'.
value-text = '1S7_GOCASV'.
APPEND value TO list.
value-key = '1S7_GOCASE'.
value-text = '1S7_GOCASE'.
APPEND value TO list.
value-key = '1S7_GOCOOC'.
value-text = '1S7_GOCOOC'.
APPEND value TO list.
value-key = '1S7_GOCOHD'.
value-text = '1S7_GOCOHD'.
APPEND value TO list.
value-key = '1S7_GOCGEN'.
value-text = '1S7_GOCGEN'.
APPEND value TO list.
value-key = '1S7_GODRI'.
value-text = '1S7_GODRI'.
APPEND value TO list.
value-key = '1S7_GODJOB'.
value-text = '1S7_GODJOB'.
APPEND value TO list.
value-key = '1S7_GODASV'.
value-text = '1S7_GODASV'.
APPEND value TO list.
value-key = '1S7_GODASE'.
value-text = '1S7_GODASE'.
APPEND value TO list.
value-key = '1S7_GODAEW'.
value-text = '1S7_GODAEW'.
APPEND value TO list.
value-key = '1S7_GODAEO'.
value-text = '1S7_GODAEO'.
APPEND value TO list.
value-key = '1S7_GODAET'.
value-text = '1S7_GODAET'.
APPEND value TO list.
value-key = '1S7_GODOOC'.
value-text = '1S7_GODOOC'.
APPEND value TO list.
value-key = '1S7_GODOHD'.
value-text = '1S7_GODOHD'.
APPEND value TO list.
value-key = '1S7_GOVER'.
value-text = '1S7_GOVER'.
APPEND value TO list.
value-key = '1S7_GOVJOB'.
value-text = '1S7_GOVJOB'.
APPEND value TO list.
value-key = '1S7_GOVASV'.
value-text = '1S7_GOVASV'.
APPEND value TO list.
value-key = '1S7_GOVASE'.
value-text = '1S7_GOVASE'.
APPEND value TO list.
value-key = '1S7_GOVOOC'.
value-text = '1S7_GOVOOC'.
APPEND value TO list.
value-key = '1S7_GOVOHD'.
value-text = '1S7_GOVOHD'.
APPEND value TO list.
value-key = '1S7_GVRE'.
value-text = '1S7_GVRE'.
APPEND value TO list.
value-key = '1S7_GVCON'.
value-text = '1S7_GVCON'.
APPEND value TO list.
value-key = '1S7_GVCJOB'.
value-text = '1S7_GVCJOB'.
APPEND value TO list.
value-key = '1S7_GVCJBU'.
value-text = '1S7_GVCJBU'.
APPEND value TO list.
value-key = '1S7_GVCJCO'.
value-text = '1S7_GVCJCO'.
APPEND value TO list.
value-key = '1S7_GVCJIR'.
value-text = '1S7_GVCJIR'.
APPEND value TO list.
value-key = '1S7_GVCJEN'.
value-text = '1S7_GVCJEN'.
APPEND value TO list.
value-key = '1S7_GVCJPI'.
value-text = '1S7_GVCJPI'.
APPEND value TO list.
value-key = '1S7_GVCJSU'.
value-text = '1S7_GVCJSU'.
APPEND value TO list.
value-key = '1S7_GVCJFL'.
value-text = '1S7_GVCJFL'.
APPEND value TO list.
value-key = '1S7_GVCJOT'.
value-text = '1S7_GVCJOT'.
APPEND value TO list.
value-key = '1S7_GVCASV'.
value-text = '1S7_GVCASV'.
APPEND value TO list.
value-key = '1S7_GVCASE'.
value-text = '1S7_GVCASE'.
APPEND value TO list.
value-key = '1S7_GVCOOC'.
value-text = '1S7_GVCOOC'.
APPEND value TO list.
value-key = '1S7_GVCOHD'.
value-text = '1S7_GVCOHD'.
APPEND value TO list.
value-key = '1S7_GVCGEN'.
value-text = '1S7_GVCGEN'.
APPEND value TO list.
value-key = '1S7_GVDRI'.
value-text = '1S7_GVDRI'.
APPEND value TO list.
value-key = '1S7_GVDJOB'.
value-text = '1S7_GVDJOB'.
APPEND value TO list.
value-key = '1S7_GVDASV'.
value-text = '1S7_GVDASV'.
APPEND value TO list.
value-key = '1S7_GVDASE'.
value-text = '1S7_GVDASE'.
APPEND value TO list.
value-key = '1S7_GVDOOC'.
value-text = '1S7_GVDOOC'.
APPEND value TO list.
value-key = '1S7_GVDOHD'.
value-text = '1S7_GVDOHD'.
APPEND value TO list.
value-key = '1S7_GVVER'.
value-text = '1S7_GVVER'.
APPEND value TO list.
value-key = '1S7_GVVJOB'.
value-text = '1S7_GVVJOB'.
APPEND value TO list.
value-key = '1S7_GVVASV'.
value-text = '1S7_GVVASV'.
APPEND value TO list.
value-key = '1S7_GVVASE'.
value-text = '1S7_GVVASE'.
APPEND value TO list.
value-key = '1S7_GVVOOC'.
value-text = '1S7_GVVOOC'.
APPEND value TO list.
value-key = '1S7_GVVOHD'.
value-text = '1S7_GVVOHD'.
APPEND value TO list.
value-key = '1S7_GCRE'.
value-text = '1S7_GCRE'.
APPEND value TO list.
value-key = '1S7_GCCON'.
value-text = '1S7_GCCON'.
APPEND value TO list.
value-key = '1S7_GCCJOB'.
value-text = '1S7_GCCJOB'.
APPEND value TO list.
value-key = '1S7_GCCJBU'.
value-text = '1S7_GCCJBU'.
APPEND value TO list.
value-key = '1S7_GCCJCO'.
value-text = '1S7_GCCJCO'.
APPEND value TO list.
value-key = '1S7_GCCJIR'.
value-text = '1S7_GCCJIR'.
APPEND value TO list.
value-key = '1S7_GCCJEN'.
value-text = '1S7_GCCJEN'.
APPEND value TO list.
value-key = '1S7_GCCJPI'.
value-text = '1S7_GCCJPI'.
APPEND value TO list.
value-key = '1S7_GCCJSU'.
value-text = '1S7_GCCJSU'.
APPEND value TO list.
value-key = '1S7_GCCJFL'.
value-text = '1S7_GCCJFL'.
APPEND value TO list.
value-key = '1S7_GCCJOT'.
value-text = '1S7_GCCJOT'.
APPEND value TO list.
value-key = '1S7_GCCASV'.
value-text = '1S7_GCCASV'.
APPEND value TO list.
value-key = '1S7_GCCASE'.
value-text = '1S7_GCCASE'.
APPEND value TO list.
value-key = '1S7_GCCOOC'.
value-text = '1S7_GCCOOC'.
APPEND value TO list.
value-key = '1S7_GCCOHD'.
value-text = '1S7_GCCOHD'.
APPEND value TO list.
value-key = '1S7_GCCRD'.
value-text = '1S7_GCCRD'.
APPEND value TO list.
value-key = '1S7_GCCGEN'.
value-text = '1S7_GCCGEN'.
APPEND value TO list.
value-key = '1S7_GCDRI'.
value-text = '1S7_GCDRI'.
APPEND value TO list.
value-key = '1S7_GCDJOB'.
value-text = '1S7_GCDJOB'.
APPEND value TO list.
value-key = '1S7_GCDASV'.
value-text = '1S7_GCDASV'.
APPEND value TO list.
value-key = '1S7_GCDASE'.
value-text = '1S7_GCDASE'.
APPEND value TO list.
value-key = '1S7_GCDOOC'.
value-text = '1S7_GCDOOC'.
APPEND value TO list.
value-key = '1S7_GCDOHD'.
value-text = '1S7_GCDOHD'.
APPEND value TO list.
value-key = '1S7_GCVER'.
value-text = '1S7_GCVER'.
APPEND value TO list.
value-key = '1S7_GCVJOB'.
value-text = '1S7_GCVJOB'.
APPEND value TO list.
value-key = '1S7_GCVASV'.
value-text = '1S7_GCVASV'.
APPEND value TO list.
value-key = '1S7_GCVASE'.
value-text = '1S7_GCVASE'.
APPEND value TO list.
value-key = '1S7_GCVOOC'.
value-text = '1S7_GCVOOC'.
APPEND value TO list.
value-key = '1S7_GCVOHD'.
value-text = '1S7_GCVOHD'.
APPEND value TO list.
value-key = '1S7_APRE'.
value-text = '1S7_APRE'.
APPEND value TO list.

File Name and File Content not gettinng passed from Proxy to Business Serv

Hi All ,
I have a requirement in OSB , where i need to pick the file from remote Source and FTP the files to Remote Target .Below are the steps which i did to achieve this.
1.Created a FTP Adapter in JDeveloper to Get the files from Source and a FTP Adpater to Put the files to Target.Inboth the adapters i have choose 'Shema is Opaque'
2.Imported the wsdl and jca file to OSB
3.Generated Proxy Service (PS ) and Business service (BS) out of Step 2
4.I edited the Message flow such a way that , the PS is routed to invoke the BS
Aslo i assigned $inbound/ctx:transport/ctx:request/tp:headers/jca:jca.file.FileName to a variable 'FileName' in PS
and in BS service i passed $outbound/ctx:transport/ctx:request/tp:headers/jca:jca.ftp.FileName = 'FileName'
When i tried to activate my session , the file that is getting written to the target has 0 byte.Also , the file name is also not getting passed from PS to BS
Can some one help me with the steps on how to use the Xpath , so as to pass the file name and file body from proxy servive to business service.
Thanks
John

I search multiple shares to find a common file name then create a single output file. I will be doing this search and file creation
for 5-10 different file names. If there is a better way .. certainly open for suggestions. It's working but having issue with
the cmd file for every file and folder I check. It puts this error out for each run of the process.
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not exist.
Thanks.
I tried your code with little changes and saved in Temp folder.
My CMD file has the below code
PowerShell C:\Temp\Untitled1.ps1
It worked.
Regards Chen V [MCTS SharePoint 2010]

Passing the file name and file type for mime_download

HI All,
Can You Please let me know how to pass the parameters file name and file type for mime_download.
Thanks in Advance.
Regards,
Haritha.

Hello Haritha,
Please see the SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/9bd97240b81e5be10000000a1553f6/frameset.htm
Edgar

Make "File name" and "Files of type" fields read-only in JFileChooser

I try to make the "File name" and "Files of type" fields read-only in JFileChooser dialog. Anybody
knows how to do? Thanks.

You mean so the user can't choose the name of the file to open or save? Not much point in even using a JFileChooser, then, is there? Or did I misunderstand the question?

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Max length of VI file paths and file names

Hi,
Is there a maximum allowed length of VI file paths and file names in LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside a LLB and LabVIEW crashes each time. I have also tried to copy the VI from the LLB to a temp folder with the Librarian VI, but LabVIEW crashes as well. The total length of the file path is around 260 characters and I strongly suspect the file path length in combination with LLB because when I use a shorter path the problem disappear. If I use a long path without LLB (just regular VIs) a warning appear "Invalid file name" instead of LabVIEW crashing.
Does anybody know the solution to this problem or must I use shorter filepaths? Perhaps it depends on which platform I am running
LV on?
Sincerely,
Mattias Ericsson

"Mattias Ericsson" wrote in message
news:[email protected]..
> Hi,
>
> Is there a maximum allowed length of VI file paths and file names in
> LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside
> a LLB and LabVIEW crashes each time. I have also tried to copy the VI
> from the LLB to a temp folder with the Librarian VI, but LabVIEW
> crashes as well. The total length of the file path is around 260
> characters and I strongly suspect the file path length in combination
> with LLB because when I use a shorter path the problem disappear. If I
> use a long path without LLB (just regular VIs) a warning appear
> "Invalid file name" instead of LabVIEW crashing.
>
> Does anybody know the solution to
this problem or must I use shorter
> filepaths? Perhaps it depends on which platform I am running LV on?
I believe windows has a 255 character pathname (file+path) limit. We once
had that problem because we had a long filename and a longer pathname.
Moved the directory up a couple levels and problem solved.

FileSaveService ignored the file name and file extensions

I am using the JNLP API to build a JWS application. When using the FileSaveService, I found it automaticlly ignored the file name and file extensions I passed to the 'FileSaveService.saveFileDialog()'.
My code is like the following:
String[] xtns = {"csv"};
FileContents fileContents = fileSaveService.saveFileDialog(
".", xtns, stream, "testFile"); Im running this application in JRE version 1.6.0_20-b02 in Windows XP.
Although in the JNLP API, it said the file name and file extension 'might be ignored by the JNLP client', I still wonder if anyone has a better solution for this?
Thanks very much :)

Sean.Wang wrote:
..I still wonder if anyone has a better solution for this?Visit [http://pscode.org/jws/api.html#fs]. Click the link to the 'Launch File Service (sandboxed) demo'. Type some characters into the text area then activate the 'Save File' button. Do you get a file chooser that defaults to (.zzz) extension?
Then if yes, and that is a 'better solution' for you, then yes, I have one. The code of the demo. can be downloaded at a link just to the right of the launch link.

Check image details like resolution, dimensions, color mode, file format, file size and file name

I have 1000 images in a folder, i want to check their details like resolution, dimensions, color mode, file format, file size and file name into excel with nice user interface.
Pls help me, m just learning ABCD in VB.

The code in the file at the link below might give you a starting point. Firstly it gives you the opportunity to list all of the properties of a file type and then you can select the properties that you want and the second utility gives you the
opportunity to list the selected properties for all files in a selected folder.
Download and extract the file and open the file in Excel.
Click the first button List Meta Data for One File (Run first)
Navigate to and Select any ONE individual photo file. (Photo files because that is what you indicated you are working with.)
You will be presented with a list of the available properties for the file. Where the Item value is blank, that property is not recorded for the particular file. Different file types have different properties and it is also dependent on how the file
was created but generally if all of the files come from the same source then the same properties are recorded for all files from that source.
Now insert a Y in column D for all of the required properties. (Don't select any with the Item value blank)
Click the second button List Selected Meta Data for all Files in a Folder (Run after selecting the required properties).
Next select a folder where the files reside. (You might need to back up to the folder if dialog is blank because it will not show individual files because the code only allows Folders.)
You will be presented with a report listing all of the selected properties for all of the files in the selected folder.
The user interface is not that great but you can improve on that if you want to with a Userform as you get to know VBA a little better.
Download the file from here.
https://onedrive.live.com/redir?resid=C2A7A5912D3D17B0!273&authkey=!ANf8R0Xf0-h3wJ8&ithint=file%2czip
Regards, OssieMac

File.delete() and File.deleteOnExit() doesn't work consistently..

I am seeing some odd behavior with trying to delete files that were opened. Usually just doing new File("file.txt").delete() would work. However, in this case, I have created an input stream to the file, read it in, saved it to another location (copied it), and now I am trying to delete it.
The odd thing is, in my simple application, the user can work with one file at a time, but I move "processed" files to a lower pane in a swing app. When they exit it, it then archives all the files in that lower pane. Usually every file but the last one opened deletes. However, I have seen odd behavior where by some files don't delete, sometimes all of them wont delete. I tried the deleteOnExit() call which to me should be done by the JVM after it has released all objects such that they don't matter and the JVM ignores any object refs and directly makes a call (through JNI perhaps) to the underlying OS to delete the file. This doesn't work either.
I am at a loss as to why sometimes some files delete, and other times they don't. In my processing code, I always close the input stream and set its variable to null. So I am not sure how it is possible a reference could still be held to the object representing the file on disk.

and then, in the other class
public int cdplayerINIToMMCD(File aDatabase, String thePassword) throws IllegalArgumentException {
     /*---------DATA---------*/
     String dbLogin, dbPassword;
     JFileChooser fc;
     INIFileFilter ff;
     int dialogReturnVal;
     String nameChosen;
     File INIFile;
     ProgressMonitor progressMonitor;
     BufferedReader inFileStream;
     String oneLine;
     int totalLines = 0;
     int linesParsed = 0;
     boolean openDBResult;
     int hasPassword;
     if ((aDatabase == null) || (!aDatabase.exists()) ||
        (FileManagement.verifyMMCD(aDatabase) == FileManagement.VERIFY_FAILED)) {
        throw new IllegalArgumentException();
     else {
        currentDB = aDatabase;
        if(thePassword == null) {
          dbPassword = "";
        else { dbPassword = thePassword; }
        dbLogin = dbPassword; //For MSAccess dbLogin == dbPassword
     //Ask the user for the cdplayer.ini file.
     //Create a file chooser
     if (System.getProperty("os.name").indexOf("Windows") > -1) {
        fc = new JFileChooser("C:\\Windows");
     else {
        fc = new JFileChooser();
     fc.setMultiSelectionEnabled(false);
     fc.setDragEnabled(false);
     //Create a new FileFilter
     ff = new INIFileFilter();
     //Add this filter to our File chooser.
     fc.addChoosableFileFilter(ff);
     fc.setFileFilter(ff);
     //Ask the user to locate it.
     do {
        dialogReturnVal = fc.showOpenDialog(mainFrame);
        if (dialogReturnVal == JFileChooser.APPROVE_OPTION) {
           nameChosen = fc.getSelectedFile().getAbsolutePath();
           if(nameChosen.toLowerCase().endsWith(INIFileFilter.FILE_TYPE)) { INIFile=new File(nameChosen); }
           else { INIFile = new File(nameChosen+INIFileFilter.FILE_TYPE); }
           if (!INIFile.exists()) {
              continue; //If the name specified does not exist, ask again.
           else { break; }
        else { //User clicked cancel in the open dialog.
           //Ignore what we've done so far.
           return(IMPORT_ABORTED);
     } while(true); //Keep asking until cancelled or a valid file is specified.
     //Determine how many lines will be parsed.
     try {
       //Open the INI for counting
       inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
       while ((inFileStream.readLine()) != null) {
           totalLines++;
       //Close the INI file.
       inFileStream.close();
     } catch (IOException ex) { return(IMPORT_FAILED); }
     //Make a progress monitor that will show progress while importing.
     progressMonitor = new ProgressMonitor(mainFrame, "Importing file","", 0, totalLines);
     progressMonitor.setProgress(0);
     progressMonitor.setMillisToPopup(100);
     progressMonitor.setMillisToDecideToPopup(1);
     //Make our DatabaseHandler to insert results to the database.
     dbh = new DatabaseHandler();
     //Open the database connection.
     do {
       try {
          openDBResult = dbh.openDBConnection(currentDB, dbLogin, dbPassword);
       } catch(JDBCException ex) { return(IMPORT_JDBC_ERROR); } //OUCH! can't write anything.
         catch(SQLException ex) {
             openDBResult = DatabaseHandler.OPNCN_FAILED;
             //Can not open the database. Is it password protected?
             hasPassword = JOptionPane.showConfirmDialog(mainFrame, "Could not open the database. "+
                                            "The password is wrong or you have not specified it.\n"+
                       "Do you want to enter one now?", "New password?", JOptionPane.YES_NO_OPTION);
          if (hasPassword == MMCDCatalog.DLG_OPTN_YES) {
             dbPassword = JOptionPane.showInputDialog(mainFrame, "Please enter your "+
                                                        "password for the DataBase:");
                dbLogin = dbPassword; //For MSAccess, login == password
          //If the password wasn't the problem, then we can't help it.
          else { return(IMPORT_FAILED); }
     } while(openDBResult != DatabaseHandler.OPNCN_OK); //If it is OK, no exception thrown.
     //Import the ini file
     try {
        //Open the INI file for parsing.
        inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
        //Read and parse the INI file. Save entries once parsed.
        while ((oneLine = inFileStream.readLine()) != null) {
           parseLine(oneLine);
           linesParsed++;
           progressMonitor.setNote("Entries imported so far: "+entriesImported);
           progressMonitor.setProgress(linesParsed);
           if ((progressMonitor.isCanceled()) || (linesParsed == progressMonitor.getMaximum())) {
              progressMonitor.close();
              break;
        //Close the INI file.
        inFileStream.close();
     } catch (IOException ex) {
          //Make absolutely sure the progressMonitor has disappeared
            progressMonitor.close();
            if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
             JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.\n"+
                "Error while attempting to close the database", "Error", JOptionPane.INFORMATION_MESSAGE);
          else {
             JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.",
                                                "Error", JOptionPane.INFORMATION_MESSAGE);
            return(IMPORT_FAILED);
     //Make absolutely sure the progressMonitor has disappeared
     progressMonitor.close();
     //Close the database connection
     if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
        JOptionPane.showMessageDialog(mainFrame, "Error while closing the database after import.",
                                      "Error", JOptionPane.INFORMATION_MESSAGE);
     //Did the user cancel?
     if (totalLines != linesParsed) {
        return(IMPORT_ABORTED);
     //Success!
     //Everything ok. Return the number of entries imported.
     return(entriesImported);
}

Server 2008r2 and windows 7 pro slow to no networkshare file searching and file access (green progress bar)

we are running a windows server 2008r2 sp1 domain controller and a 3com gigabit switch to which 7 windows 7 pro computers are connected. We are only using the windows server to distribute a few printers and as a network share (z drive).
we are storing all files (word documents only) centrally on the server (z share), and files are accessed and written to the z share.
Problem is that file access from the z share on the windows 7 client computers is at best buggy. we are able to browse the z-share, but as soon as we want to search the z-share for files (f.i. use file explorer with "content: memorandum") the green
progress bar shows and no search is performed. something like alphabetically sorting a directory on map/file name on the z-share also shows a green bar with no sorting. manually going to the files works.
One thing i noticed, sometimes not all files that one user created and stored on the server is visible and can be found by another user. I prefer to disable all offline file caching setting, because that feature is not used. no files should be made accessible
offline. i don't know where to change that on the server side.
I am reluctant to experiment on the server end (2008r2 sp1), so i tried a few suggested solutions on the client end (windows 7 client)
I tried disabling offline file caching
i tried properties (z share) ==> advanced and map optimizing and several options there
i tried disabling the smbv2 protocol and disabling the smbv1 protocol (using
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi command etc. posted by microsoft)
i tried disabling windows defender
i tried accessing the z share via ip and server name (the share is mapped via its servername, e.g. dennis-dc1\share). still the same
file searching on the clients c drive ('own harddrive') works much better, file searching on the server also works.
any suggestions or solutions that i can test on the client side, as mentioned i am reluctant to change something on the server side. if a solutions works, i prefer to change it on the server side.

Hi,
The issue could be due to windows indexing service taking long time in sorting and searching in mapped drives. Please try the steps belwo to disable windows indexing service or search service on the windows 7 client to resolve the issue.
You can click on Start and select Control Panel, click on
Programs and Features, go into the Turn Windows Features on or off section Scroll down the list and uncheck the box next to Indexing Service or Windows Search.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Dynamic File Name and File size

Hi All
I need some help in calling Dynamic File Name and Dynamic File size of a file in my adapter Module.
Could you please provided some help on the same?
I have tried the same through UDF it is working. Could anyone provide me the steps for the same
Regards
Abhishek Mahajan

Hi,
You can use the already available adapter module "DynamicConfigurationBean". Have this adapter module at the top of the module list in CC.
Have the parameter value as insert http://sap.com/xi/XI/System/File FileName and http://sap.com/xi/XI/System/File SourceFileSize (corresponding to the key names)
For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/45/da2239feb22e98e10000000a155369/frameset.htm
There is also a SAP note available for the same....dont remember the note number:(.....
Regards,
Abhishek.

Loading File name and file contents into two separate tables using Sqlloadr

Hi All,
I have situtation like to load File contents into One table and File name into one table . File comes with .txt extension
Example :
File name : product_09_abc.txt
File contents :
Productcode
ABC
CDE
EFT
Can you please help me out this how can we acheive this using SQLLOADER.

SQL*Loader will not pass through the filename for you to be able to insert into a table.
You will need to have a controlling o/s script that picks up the file name, calls sql*loader and then also call's an SQL script (using sql*plus?) to insert the filename into a.n.other table.

Adding file name and file full path to a page

Hi all I'm new to scripting
What I want to do and don't know how to go about it is to run a script that collects the saved file name
and the full path where the file is saved on the network and displays it on my document
If any one has done something similar or if some one can help me create it it would be appreciated
Thanks Gabriel

var idoc = app.activeDocument;
var itext = idoc.textFrames.add();
var file = idoc.fullName;
itext.contents = file.fsName;

File recovery and file structure?

Bummer: Some combo of Excel, Google Earth, and my involvement have left my Sandisk thumbdrive corrupted. Disk Utility sees the drive but can't mount it and can't repair it. I used Sandisk's RescuePRO software which pulled off lots of files, but most of them had been deleted and few were actually the latest copies. Lots of the recovered files had odd file types like .MOF, .ANM, and Illustrator and Codewarrior files were just gone. And (finally, here's the question): is there any way to handle Pages and Keynote files when you're in a desperate file-recovery situation? They are bundles of xml, tiff, and other files, and on recovery, all these bits seem to emerge as separate files. Is there any way to put Humpty Dumpty together again, or are data from these apps particularly bad news when disk failure happens?
Thanks for any advice, philosophy, tips or tricks.

Is your SanDisk drive formatted MS-DOS or Mac OS Extended? If the former you will have a major problem because Mac files are not properly saved on MS-DOS formatted disks. If the SanDisk recovery program is not a Mac program, then it probably knows nothing about Mac files. All of this would seriously complicate trying to recover file created by Mac programs.
There are file recovery programs for Mac OS X, but I have no idea if they can recover files from an MS-DOS formatted thumbdrive. You would need to talk to the developers about it. Your choices are Data Rescue II (www.prosofteng.com) and File Salvage (www.subrosasoft.com.)

File Compression and FIle Conversion in FCE4

Similar Messages

Maybe you are looking for