File Compression Error Occurred on Expert Settings

I finally thought I had a decent set of settings to compress the QT movie for YouTube (and will tweak this now that each ten minute movie can be 1 gig! Hooray!). So I used what had worked on the previous movies and got the error
File Compression Error Occurred
The movie could not be properly compressed. The movie may contain some data that is invalid for the type of compression selected.
The movie itself contains imported footage from my camcorder (DV), as I usually use. And I used only iMovie stock music loops and one Sfx...all aif files.
I've tried tweaking the settings of Expert Settings here and there. Changed the 15 fps to 30. Made the Key At this point, what do I look at? Something within the movie itself? Or the settings (H.264, qual. Hi but also tried med, Frame rate tried 15 and 30, Key frame rate tried Auto and 10, Encoding multi-pass, Dimen. 640x480, Scale Letterbox. Sound is ACC, 24,000 kHz, stereo, bit rate 48kbps. Prepare for internet streaming is unchecked currently. Think it was that way when I last made a movie.
Don't know where to continue to troubleshoot this. URmpfff. Help!

Wow...this is a sticky problem. I could not resave the movie as another name. Frozen program, pinwheel of death, etc. I've had about three frozen attempts since I first wrote...
Googling phrase from error message got only a few lost souls who never did post the solution. One solution someone had figured the problem was with Flip4Mac...to uninstall it, but they had problems uninstalling it. So did it...frozen computer).
I did get this solution to work to move my movie along. It saved rather quickly to a 350 meg or so full quality file on Expert settings. Then got a single .dv file. Imported that into a new iMovie project (wonderful....that I titled My Great Movie fer petes sake...Hope I remember to retitle it.
Along the way were error messages like Error 54, no permission to write to file, no hard drive space, etc. Baloney, I think...or is there any clue in all this?
Thanks.

Similar Messages

  • A file activation error occurred. The physical file name may be incorrect while creating database

    Hi Experts,
       I am trying to create a database in my local system, while creating i am getting error like below can anyone please help me on this.
    Msg 5105, Level 16, State 2, Line 1
    A file activation error occurred. The physical file name ' C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\NewData\Demo_dynamic.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.
    Msg 1802, Level 16, State 1, Line 1
    CREATE DATABASE failed. Some file names listed could not be created. Check related errors. 
    Awaiting for the response......!! 
    Niraj Sevalkar

    I have created earlier database in 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA'
    but now i have created one newdata folder and trying to create in it also i have checked the path what have you suggested above and the NewData folder is existed please check below snapshot
    Both folders files and NewData folder which don't have any files 
    Niraj Sevalkar

  • 'Error occured while converting the file--unknown error occured 0x77686174

    I just got my first iPod but I'm a little frustrated. I put in a cd, iTunes opens and asks me if I want to import the songs, I reply yes. When it tries the very first song of the cd, it immediately comes up with 'Error occured while converting the file "name of song". An unknown error occured (0x77686174).' It doesn't matter if this is a completely new cd or an older one.
    I ran CD diagnostics on iTunes and my results are below. I have posted this several times on many different boards and haven't found any solutions or been given any solutions from anyone. I have an iPod that I can't use because I can't download any songs...does anyone have any idea what to do?
    I've looked at Dell to update drivers for my cd drive but it says that I have the newest drivers...the computer isn't even a year old yet. What do I do?? I've wiped the cd like several posts say to do, I've clicked the fix error option on cd off and on like several posts have said to do, I've changed the conversion of 128 to 64 like several posts have said to do...help please, anyone?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.3.1.3
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    Disk drive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
    Disk drive, TEAC USB HS-CF Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-MS Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-SD Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-xD/SM USB Device, Bus Type USB
    CD-ROM Drive, TSSTcorp CDRWDVD TS-H492C, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: TSSTcorp CDRWDVD TS-H492C, Rev DE02
    Audio CD in drive.
    Found 12 songs on CD, playing time 54:35 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:30:32
    Track 3, start time 09:38:25
    Track 4, start time 14:58:53
    Track 5, start time 18:01:08
    Track 6, start time 21:24:57
    Track 7, start time 26:37:43
    Track 8, start time 32:16:51
    Track 9, start time 36:17:54
    Track 10, start time 41:57:36
    Track 11, start time 46:21:38
    Track 12, start time 51:48:24
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 48.
    The drive CDRW speeds are: 48.

    I came across your error code in iLounge, this post might help you out: http://forums.ipodlounge.com/showthread.php?threadid=30496

  • File to File Scenario: Error Occured

    The following error were displayed in the communication channel monitoring for the Sender FTP Adapter
    1.An error occurred while connecting to the 11.10.10.41FTP server . The FTP server returned the following error message:  'com.sap.aii.adapter.file._ftp.FTPEx: 550 CWD failed. "/XI_Test_Files/In": directory not found.'. For details, contact your FTP server  vendor.
    i have checked the FTP server , it is running fine.The  path is also correct. even though i am getting the above error . Please try to resolve my issue.

    Hi,
    Open the Folder through Run Option( like //XI_Test_Files/In)
    Ping the FTP Server from Run commad( like ping 172.13.12.1)
    Can you Paste you Sender FTP Communication channel for more clarity
    Regards
    Seshagiri

  • Elements do not show up in edge file but they do in HTML file; no errors occured

    I am a senior in college working on building a website for a fictional company for a year-long thesis graphic design project. In my class last semester, I learned how to use Edge Animate and created an 11 page website without any trouble. I had always kept the files saved to my flash drive, and kept a backup on my personal laptop as well as on my external hard drive. There was also a backup of the files on a disc that I turned into my professor in mid-December. All of these files worked fine at the time.
    In early January, I wanted to make changes to the website so I installed a trial version of Edge Animate on my laptop. When I opened any of the edge files from any of the backups, the stage was blank and the animations did not show up on the timeline. The elements of the website still show up in the Library but they are no longer arranged on the stage. When I got back to school at the end of January, I tried opening the files on the school computers and had the same problem. I asked my professor to try the file that was saved to the disc and he encountered the same issues on his computer. All of these computers are either iMacs or Macbook Pros.
    I have not recieved any error messages and did not do anything to corrupt the files or save over them. I am able to open the html files in a browser with no issues; all animations and images work fine. The only change I can think of is that Edge may have been updated over break and when I installed the trial version I installed a newer version, and for some reason the new version of the program could not properly load my project that I started on a older version in October or November of 2013.
    I am happy to upload the files but I am unsure how to do that. Please let me know if there is a way to resolve this issue, or will I have to start over?
    Thank you!

    Try to clear your preference and restart your Animate.See if that fixes your problem
    http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
    If  that does not work see if there is a lloopback address lookup.
    Check out the correct answer in this post to fix that http://forums.adobe.com/message/6116991
    Let us know if this fixed your issue

  • File permission error occurs while saving changes to LV 5.02 drivers under LV 6.1 platform.

    Old hard disk crashed. Saved all LabView 5.02 libraries and try to run it under newly installed LabView 6.1. The VI's are runnable but no changes to the VI's allowed. Tried recompiling - didn't work.

    I've encountered the same thing with windows2K->windows98. My work around is to use the VI library manager (Tools>VI Library manager) to convert the LLB to DIR and then back from DIR to LLB.
    -R

  • IMovie Compression Error!

    Hey all,
    I have a customer who needs to encode clips from a DV Cam to Sorenson 3. During the encode they get this error:
    "A file compression error occurred
    The movie could not be properly compressed. The movie may contain some data that is invalid for the type of compression selected."
    So far nobody seems to know how to solve this. Any ideas anybody? Thanks

    We also had this problem. Here is what worked for us. I'm interested to see if it works for anyone else.
    This video project was the end product of four different students working more or less independently on the same project over the span of ten months. Each used digital still cameras, jpgs exported from PowerPoint, the internal microphone, and a number of different digital video cameras to get media into the iMovie project.
    We had exported and burned many versions of this project so when it stopped working and starting giving us the Compression Error message, I knew it had to be something we just added.
    The side note here is that when exporting the 20 minute video at Full Quality DV, the process will complete, but the exported file will have video but no sound. The first time we got the Compression Error message was when we exported using Expert Settings and tried just the audio. That forced it to fail.
    The solution was to select small groups of clips and try to export each one. When the Share, or Export window opens, check the box at the bottom that says, Export selected clips only. If it worked, we skipped to another set. Eventually we isolated it to a section of clips and exported each clip individually. It turned out to be one of the audio dialog clips that was recorded using iMovie earlier that week. As a test, I deleted it and the entire video exported just fine. We rerecorded that audio clip and everything continued to work just fine.
    I opened the Media folder inside of the iMovie project file and located the offending voice recording. It opens in QuickTime and it seems to be perfectly fine. I have no idea what was wrong with it. Two other audio clips were recorded right after that clip and they are working just fine.
    I suppose this is less of a solution, and more of a work-around. Hopefully it helps someone out, because it made me crazy.
    (I don't know if this is related, but the iDVD project took about an hour and a half to compress the video, but it took well over 4 hours to compress the audio on a 1.67 GHz PowerBook G4 with 2 GB RAM. This seems to be common with most of the larger iDVD projects this year. I almost force quit iDVD, but getting info on the .dvdproj file showed that it was still growing.)

  • Export/Encoding/Compression Error

    I have been trying to burn a DVD for the last week without any success using iMovie and iDVD.
    When trying to burn the DVD on iDVD, the program would "Unexpectedly Quit" while it is encoding the movie. It would encode the first 2-3 minutes of the movie before the program quits. Furthermore, when I try to save the project to a Disk Image, the program unexpectedly quits too.
    Since I noticed that the program was quitting during the encoding process of the first movie, I tried exporting the first movie into another format such as QuickTime and MPEG-4 using iMovie. QuickTime immediately prompts the message:
    "A file compression error occurred. The movie could not be properly compressed. THe movie may contain some data that is invalid for the type of compression selected."
    The project consists of JPEG's, Quicktime MOV's with sound(from a Kodak Digital Camera), and M4p's (purchased through iTunes). I would believe all these formats are compatible with iMovie since they are all imported successfully. When trying to export to MPEG-4 with Audio (AAC-LC), the encoding processes half way, then quits unexpectedly.
    On an interesting note, when I encode the same movie using MPEG-4 with NO AUDIO, the encoding process completes successfully. I am suspecting that the issue may have to involve the Audio.
    Out of the 9 iMovie Projects I included in my DVD, 5 of them could be exported into Quicktime MOV's correctly, while the other 4 would cause the program to quit. I noticed that the 5 that do work are all under 5 minutes of video and audio. The other 4 that say "A compression error occurred". I do not know if this somehow attributes to the problems.
    Is there anything I can do to encode these 4 movies correctly?
    If it is an issue with the audio compression, is there a work around for it?
    If I am able to encode these movies correctly on iMovie, should the encoding process for iDVD work correctly also?
    Any help anyone could provide would be greatly appreciated. Thank you.
    Mac Mini 1.42GB   Mac OS X (10.4.3)   1 GB Ram

    Hi ebm - not sure that I can help much, but a few observations:
    iMovie converts M4P files to AIFF, so that shouldn't cause a problem.
    The .MOV files from the Kodak still camera may be more problematic - are you sure that the audio on them plays in iMovie? What format are those files - perhaps they're mpeg4?
    I cannot see why you would want to convert the movie to MPEG4.
    What about creating a QT (Full Quality) file of each movie, then open iDVD and drag them into the iDVD window. If their combined length is less than 60 minutes, you could use the Best Performance setting with background encoding ticked (in iDVD Preferences) - you can then watch them as they encode.
    Of course, Best Quality may produce a slightly better result, but the encoding occurs after you click Burn.
    Good luck!

  • File system error: The record ID is incorrect. Physical file: . Logical file:

    Hi,
    I face this error message when I try to 'process update' a dimention, sometime it works but sometime it failed with the error below:
    Description: File system error: The record ID is incorrect. Physical file: . Logical file: . 
    My environment: Window Server 2008 R2+SQL Server 2008 R2.
    Note: this issue can be resolved by full cube process, but I can't to that every time if it failed, just want to know what happen at backend of SSAS, It block me neary 2 week without any finding, really appreciate that someone can help on this.
    I have do some research with google, I think the root cause here is not TopCount function(It may be a problem with SQL Server2005), also not the size limitation of 4GB size of .astore file.(I check the size of my cube under 'Data\XXX.db\' folder, which only
    have few MB size).
    Thanks,
    Tom

    Hi Tom,
    Here is a microsoft fix
    FIX: "File system error" occurs when you try to run a process update operation on a dimension in Microsoft SQL Server 2008 Analysis Services and in Microsoft SQL Server 2008 R2 Analysis Services
    In your acenario, in order to fix this issue, please apply the latest Cumulative update and Service Pack according to your SQL Server version. Besides, there are two workarounds in that fix, plese try it and check if it works or not.
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2276495
    Regards,
    Charlie Liao
    TechNet Community Support

  • File System error while restoring a backup from analysis server to another

    Hi
    I have restored an analysis database backup to from server 1  (sql server 2008) to server 2(sql 2008) and its working fine 
    and now am trying to restore another database from analysis server server 3 (sql 2005) to  server 2 (sql 2008 )but its giving error that 
    File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

    Hi Maverick,
    According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
    In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
    step, please refer to the link below.
    http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
    Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
    http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • An error occured while trying to read data

    Hi RoboHelpers,
    While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
    I then got this error when I tried to reopen the .XJP file:
    "An error occurred while trying to read data from
    <D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
    I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
    I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
    My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
    <?xml version="1.0" encoding="utf-8"?>
    <rhpml majorversion="2" minorversion="0">
        <folders/>
        <topics>
            <topic>
                <name>Tool_ID.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Description.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Hardware.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Hardware_Introduction.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>List_of_Available_Tools.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Tool_Type.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_trax_calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Probes.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Partial_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_File_Name.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>User_Defined_Calibration_Order_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Search_Override_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Optical.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Showing_an_Animated_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>print_list.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>example_printout.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Machines.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Deleting_the_LOADMACHINE_Command.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Ball.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>collision_tolerance.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Optical_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Setup.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>autocalibrate_probe.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Specifying_Collision_Tolerances.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Using_Existing_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_4_-_Begin_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_3_-_Define_Ports.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_8_-_Measuring_Port_2.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_7_-_Measuring_Port_3.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_FCR25_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_the_No_Machine_Item.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Deleting_the_Machine.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>defining_probe_changers.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Adding_Custom_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>add_tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>With_Averaging.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Shank_Optical_Vector_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Fast_Probe_Mode.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>X_Y_and_Z_Center.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Delete_Tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ScanRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>available_tip_types.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Thickness_of_the_ball_tip.htm</name>
                <name>PrbRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Edit.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Shank_Vector_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>edit_probe_components.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Edit_Tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <name>To_delete_a_wrist_angle.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Setup.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Measure.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Disk_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>PrbRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Previewing_your_Probe_Configuration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_unit_calibration_data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>New_Angles_List_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>calibration_date_and_time.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Global_Used.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Individual_Angle_Data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>calibration_date_and_time.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Equally_Spaced_Angles_Data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Reset_Tips.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Disk_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_unit_calibration_data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>dmis_label.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>add_angles.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Notes_on_the_Add_Angle_option.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Working_with_the_Angle_Grid.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>available_tip_types.htm</name>
                <name>calibration_date_and_time.htm</name>
                <name>Results.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Reset_Tips.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Diameter_Length.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Previewing_your_Probe_Configuration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>User_Defined_Calibration_Order_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Wrist_Map_If_Available_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Diameter_Length.htm</name>
                <name>Use_Wrist_Map_If_Available_check_box.htm</name>
                <name>Probe_Description.htm</name>
                <name>List_of_Available_Tools.htm</name>
                <name>Probe_File_Name.htm</name>
                <name>use_trax_calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_2_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Partial_Calibration.htm</name>
                <name>Probe_Description.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>autocalibrate_probe.htm</name>
                <name>Search_Override_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Disk.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_ACR1_Probe_Changer.htm</name>
                <name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>example_printout.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>defining_probe_changers.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_CW43_Probe_Changer.htm</name>
                <name>Optical.htm</name>
                <name>example_printout.htm</name>
                <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
                <name>defining_probe_changers.htm</name>
                <name>Inserting_Quick_Fixtures.htm</name>
                <name>Shank.htm</name>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
                <name>Step_5_-_Prepare_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <name>Probe_Setup.htm</name>
                <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
                <name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_the_No_Machine_Item.htm</name>
                <name>Deleting_the_Machine.htm</name>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Showing_an_Animated_Probe_Changer.htm</name>
                <name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
                <name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_4_-_Define_Ports.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_6_-_Measure_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_7_-_Measure_Port_8.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
                <name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
                <name>ACR1_Step_10_Review_Calibration_Results.htm</name>
        </topics>
    </rhpml>
    Thanks,
    Jared

    Hi Jared.
    I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
    <topic>
        <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    <topic>
        <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    <topic>
        <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    There are others.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • CRITICAL: Error occured while working with configuring .in WAS deploytool

    Hi,
    I have installed developer workspace WAS edition SP11.
    I had given a master password to all the users created while installation.
    But now for deployement and visual administration that password is not working.
    So i started deploytool to enable Superadmin.
    It allows me to change the value but when i save it,
    it throws error stating:
    <b>"CRITICAL : Error occured while working with configuration"</b>
    and then deploytool stops abruptly.
    Unless I enable superadmin, i wont be able to reset all my passwords.
    How do i proceed??
    AbhiJeet..

    Hi all and Abhijeet especially,
    have you found the cause of this problem? I'm experiencing exactly the same thing. What's to be done about this?
    <u>excerpt from configtool log file:</u>
    Error occurred while working with Configuration.
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
         at
         com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
         at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:337)
         at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:59)
         at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
    Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
         at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:608)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
         at
         com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
         ... 5 more
    Message was edited by: Chee Choong Ching

  • Illustrator CS5 (.ai) Flash Pro CS(5/6) Flex4 internal error occurs

    Hi, I'm begginer in Flash-Flex env development.
    pass through the data symbol drawn in Adobe Illustrator CS5 Converted to components in Flash Pro CS6,
    the swc file compiled with Flash Builder 4.6 Flex, Build an internal error occurs.
    Not all files to error, Occurs in some files.
    The fact that the file is not found error was passed to AbcCompiler is Why do not contain data when turned into swc in Flash Pro?
    I'm looking for information from people who were able to resolve the situation the same way.
    error log is as follows:
    !SESSION 2012-06-12 20:02:55.172 -----------------------------------------------
    eclipse.buildId=I20100608-0911
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=ja_JP
    Command-line arguments:  -os win32 -ws win32 -arch x86
    This is a continuation of log file C:\Users\User\Adobe Flash Builder 4.6\.metadata\.bak_0.log
    Created Time: 2012-06-12 23:26:39.448
    !ENTRY com.adobe.flexbuilder.project 4 43 2012-06-12 23:26:39.450
    !MESSAGE Uncaught exception in compiler
    !STACK 0
    java.lang.NullPointerException
              at java.io.ByteArrayInputStream.<init>(Unknown Source)
              at flex2.compiler.io.InMemoryFile.getInputStream(InMemoryFile.java:97)
              at flex2.compiler.Source.getInputStream(Source.java:381)
              at flex2.compiler.abc.AbcCompiler.parse1(AbcCompiler.java:196)
              at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2872)
              at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2825)
              at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:457)
              at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1291)
              at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1568)
              at flex2.tools.oem.Application.compile(Application.java:1349)
              at flex2.tools.oem.Application.recompile(Application.java:1287)
              at flex2.tools.oem.Application.compile(Application.java:886)
              at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication .java:359)
              at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder $MyBuilder.mybuild(ASApplicationBuilder.java:319)
              at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder .build(ASApplicationBuilder.java:129)
              at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBu ilder.java:198)
              at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build( ASItemBuilder.java:70)
              at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.bu ildItem(FlexProjectBuilder.java:607)
              at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.bu ild(FlexProjectBuilder.java:382)
              at com.adobe.flexbuilder.project.compiler.internal.FlexIncrementalBuilde r.build(FlexIncrementalBuilder.java:187)
              at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java :728)
              at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
              at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager .java:199)
              at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager .java:239)
              at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java :292)
              at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
              at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager .java:295)
              at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildMan ager.java:351)
              at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java :374)
              at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.ja va:143)
              at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:2 41)
              at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)

    as a result of devising the data, we were able to eliminate the error.
    I will be shared information when I get the cause of the path information available.

  • GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

    Hello,
    As you can tell from the title of this question, I am no expert with GPO's.  Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb".  While
    I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already.  That is not necessarily my case and I would ask for a
    little patience and a bit of 'hand-holding' for what I need.
    I run SBS 2011, and in Group Policy Management I have a custom GPO.  In this GPO I define all my settings.  I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings.  This
    policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03.  That may be the issue, but before making any changes I am seeking expert advice.
    When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
    I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified.  I see that my option for the location is set to "Default"
    which by my guessing would be located in the C:\Windows\sysvol directory.  Below is what I see there:
    C:\Windows\sysvol\domain
    C:\Windows\sysvol\staging
    C:\Windows\sysvol\staging areas
    C:\Windows\sysvol\sysvol
    I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
    But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
    To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry.  I searched my server for
    that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
    If I am correct with my assumption and basic knowledge, I should move all objects as follows:
    -Move FROM: C:\Windows\sysvol\domain\policies
    -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether. 
    Thank you for anyone's help and time with assisting me with this request.
    John Fester

    > top "Settings" I see the error: "An error occurred while generating
    > report: Object reference not set to an instance of an object."
    That's due to a security setting (most possibly) your current OS does
    not understand. Hard to find out wich exact setting it is... To resolve
    this issue, we need the gtpptmpl.inf file residing in the policiy's
    sysvol folder. To open this folder, edit the policy, move to computer
    settings - policies - windows settings - scripts - startup, press "show
    files". Then move two folders upwards and back down to
    .\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
    its contents and we'll have a look at it.
    > location, which I speculate is: C:\Windows\sysvol\domain\policies (which
    > folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
    That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
    > all objects as follows:
    > -Move FROM: C:\Windows\sysvol\domain\policies
    > -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    No.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • I was trying to update my ipod touch and an error occured. Now it says I'm suppose to connect it to itunes and restore it to it's original settings. That's going to make me lose all my pictures and stuff right?

    Okay, while I was updating my ipod an unknown error occured. Now It's telling me I need to connect it to itunes, even though it's plugged in already. And when It does connect it shows up as a generic "ipod".  It doesn't even show my ipod anymore. And it wants me to restore it. It said something around the lines of "restore ipod so it can connect to itunes." Isn't that going to delete all my pictures and stuff? I don't think it saved the reboot from when it was updating!I just want all my settings and stuff back! I don't want to lose all my stuff especially my 2,000 pictures on there! Ugh! Help!

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

Maybe you are looking for

  • Restor iCal and Address Book from TM

    I have been having terrible problems with my computer hangin, crashing, spinning wheel, etc, therefore I have clean installed and reverted to full TM backup on several occasions but the problems have persisted. Therefore, I have now clean installed w

  • Is there anything to do with IE when convert html to PDF?

    Happy Christmas everyone !    We find that the PDF Generator  can not convert to the same display result for Chinese words in html ,such as "<B>中文</B>","<strong>中文</strong> ", when converted , the pdf seems not to be bold , and the italic words are n

  • Why is my Scanner not functioning?

    Hello, I have an HP 4600 scanner. Is there a way to update the scanner drivers via Software Update in Apple? It works fine with Photoshop CS2 but does not work in Photoshop CS3.

  • "Save for Web" not working (again)

    I have reinstalled Photoshop CC and removed all "save for Web" preference files. I receive the following error message: "The operation could not be completed. A file or directory already exists with the same name" Which file or directory? Wouldn't it

  • There is no I-tunes update on App Store

    This days i saw on I-Tunes an update, well..... I've clicked on and it linked me to the appstore update page. The uploading took 3 seconds and than the appstore's page showed me : "there's no update for your Mac" The last time i download the update f