File conflict while upgrading initscripts

Hi,
in order to update udev, which shows these errors (files already existing)
systemd-tools: /usr/share/man/man5/hostname.5.gz existiert im Dateisystem
systemd-tools: /usr/share/man/man5/locale.conf.5.gz existiert im Dateisystem
systemd-tools: /usr/share/man/man5/vconsole.conf.5.gz existiert im Dateisystem
I'm upgrading initscripts first, as mentioned in another posting relating to the same problem. But this gives those errors (files already existing)
hwids: /usr/share/hwdata/pci.ids existiert im Dateisystem
hwids: /usr/share/hwdata/usb.ids existiert im Dateisystem
Upgrading hwids alone still creates the same error. So what to do?

Seems the proper thing to do would be to upgrade everything at once with pacman -Syu
https://bbs.archlinux.org/viewtopic.php?id=142507
https://bbs.archlinux.org/viewtopic.php?id=142508

Similar Messages

IPhone automatic backup file location while upgrading to iOS 5

I need to know where is located the iPhone automatic backup file created by iTunes while upgrading iPhone to iOS 5 via iTunes 10.5.2.11 / Windows XP. Itunes creates automatically a backup of iPhone before upgrading and will restore this backup after upgrade is completed. I need to know where to find this backup file.
I just upgraded iPhone to iOS 5 via iTunes on Windows XP. I forgot to make my own iPhone backup before upgrading. After upgrading and restoring iPhone (the automaitc backup), iTunes started a sync with Outlook even tough I had checked in iTunes "Prevent iPods, iPhones and iPads from syncing automatically".
I did not wish iTunes to sync with Outlook, and cancelled the sync. Now I got a lot of stuff mixed up in my iPhone and I would like to restore my iPhone with the automatic backup created by iTunes before upgrading to iOS 5. This backup doesn't show in the backups listed in iTunes / device backups.
Thank you.

Had same problem, but IOS 5.0.1 can't find automatic backup on my laptop, not sure if it excists?

File conflicts when upgrading pacman

My Arch system has not been upgraded in a few months as it has been out of commission. I turned it on today and decided I should do a full system upgrade. When I do so, pacman prompts me to upgrade pacman itself first, so I agree, and the upgrade errors out with the following message:
checking for file conflicts...
error: the following file conflicts were found:
pacman: /etc/pacman.d/testing: exists in filesystem
What do I do?

Move this file out of pacman way

DTR Conflict while upgrading CRM ISA 5.0 to SP19 - Missing stylesheet

Hi All,
I am working on CRM ISA 5.0 upgrade from SP11 to SP19 in a new track. I have resolved all conflicts except one file stylesheet_ff.css.
It was present in earlier SP version in this path - DCs/sap.com/crm/tc/web/appbase/_comp/src/packages/mimes/stylesheet_ff.css.
As it not present in the SP19 components now, I am not able to resolve it.
After we saw that application was working fine in Development system, we thought of sending everything to Quality environment. Basis people were able to consolidate all changes but got errors while trying to assemble all components.
Here is the log of failed assembly of SHRWEB component -
20120117091052 Info   :Starting Step Check-assembly at 2012-01-17 09:10:52.0885 -6:00
20120117091053 Info   :Checks for software component sap.com,CUSTCRMPRJ are performed now:
20120117091053 Info   :Checks for software component sap.com,CUSTCRMPRJ finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMAPP are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMAPP finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMDIC are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMDIC finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMWEB are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMWEB finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-SHRAPP are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-SHRAPP finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-SHRWEB are performed now:
20120117091053 Info   :1DTR conflicts
20120117091053 Fatal :There are unresolved collisions, stopping export now
20120117091053 Info   :Checks for software component sap.com,SAP-SHRWEB finished succesfully
20120117091053 Info   :Step Check-assembly ended with result 'fatal error' ,stopping execution at 2012-01-17 09:10:53.0635 -6:00
We are getting similar errors in every other component. For example, I am listing the log which we got for SHRAPP component here-
20120117091052 Info   :Starting Step Check-assembly at 2012-01-17 09:10:52.0885 -6:00
20120117091053 Info   :Checks for software component sap.com,CUSTCRMPRJ are performed now:
20120117091053 Info   :Checks for software component sap.com,CUSTCRMPRJ finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMAPP are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMAPP finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMDIC are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMDIC finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-CRMWEB are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-CRMWEB finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-SHRAPP are performed now:
20120117091053 Info   :Checks for software component sap.com,SAP-SHRAPP finished succesfully
20120117091053 Info   :Checks for software component sap.com,SAP-SHRWEB are performed now:
20120117091053 Info   :1DTR conflicts
20120117091053 Fatal :There are unresolved collisions, stopping export now
20120117091053 Info   :Checks for software component sap.com,SAP-SHRWEB finished succesfully
20120117091053 Info   :Step Check-assembly ended with result 'fatal error' ,stopping execution at 2012-01-17 09:10:53.0635 -6:00
In order to resolve this conflict, I created stylesheet_ff.css file at path crm/tc/web/appbase/_comp/src/packages/mimes/stylesheet_ff.css. It didn't resolve our issue because for newly created stylesheet_ff.css file's current version is the first version. Hence I am not able to see any conflict in its version graph from NWDS.
I have raised an SAP OSS message asking why was this stylesheet remove and got a response as mentioned here
The reason for this is the changed CSS determination to support more
browsers (see also note 881967). How the CSS determination works now is
described in note 1427396.
In general the content of stylesheet_ff.css has been moved to
base_stylesheet.css. It is the base for all browsers, because at the
time of the change, Firefox was the only big browser really adhared to
the W3C standard.
All other style sheets are only the delta. They are included after the
base_stylesheet and the entries in the delta style sheet are overwritingthe entries in the base_stylesheet. This is also the reason why the ie9
style sheet is so small.
I can understand SAP's response, however because of this unresolved conflict we are facing issues in assembly.
Please help.
Thanks in advance.
Amol Joshi

Dear Amol,
I suggest to proceed with this in the SAP ticket, Iwan will assist you in anything.
In case you have difficulties please post your questions in the SAP ticket.
I am closing this thread.
Thank you and Best Regards,
Ervin

Pacman upgrade - file conflict on lorcon

On last upgrade, pacman stopped because of a file conflict:
lorcon: /usr/share/man/man3/lorcon.3.gz exists in filesystem
What I did:
# pacman -R lorcon-old-svn pylorcon aircrack-ng-scripts
# pacman -S lorcon python2-pylorcon aircrack-ng-scripts
Then everything worked out properly.
I guess theese packages were renamed, but pacman did not ask me "Do you want to replace lorcon-old-svn with lorcon?", unlike other times.
Don't know if this was the expected behavior, anyway I'm posting in case someone needs.
Regards
Davide

Hello I'm facing a problem..
I just installed archlinux
i ran
# pacman -Syu command
pacman has downloaded the packages but it is not installing the packages...
it showing error msg...
error: failed to commit transaction(conflicting files)
file system: /etc/mtab exists in filesystem
initscripts: /etc/profile.d/locale.sh exists in filesystem
Errors occurred,no package were upgraded
Plz tell me what to do...
Last edited by imk (2012-02-11 18:42:41)

[Solved] Dovecot upgrade failed due to file conflicts

yaourt -Syu failed this morning do to file conflicts with dovecot. Here is the output:
:: Starting full system upgrade...
warning: iscan: local (2.15.0.3-1) is newer than archlinuxfr (2.8.0-3)
resolving dependencies...
looking for inter-conflicts...
Targets (10): libcups-1.3.10-1 cups-1.3.10-1 libmysqlclient-5.1.34-1 dovecot-1.1.14-1
ffmpegthumbnailer-1.5.0-1 mysql-clients-5.1.34-1 mysql-5.1.34-1 recordproto-1.13.2-2
renderproto-0.9.3-2 subversion-1.6.1-3
Total Download Size: 51.88 MB
Total Installed Size: 148.31 MB
Proceed with installation? [Y/n]
:: Retrieving packages from extra...
libcups-1.3.10-1-x86_64 185.2K 106.8K/s 00:00:02 [#########################################################] 100%
cups-1.3.10-1-x86_64 3.0M 121.0K/s 00:00:26 [#########################################################] 100%
libmysqlclient-5.1.... 12.2M 120.9K/s 00:01:44 [#########################################################] 100%
dovecot-1.1.14-1-x86_64 3.2M 120.2K/s 00:00:28 [#########################################################] 100%
mysql-clients-5.1.3... 278.2K 122.2K/s 00:00:02 [#########################################################] 100%
mysql-5.1.34-1-x86_64 25.9M 122.4K/s 00:03:36 [#########################################################] 100%
recordproto-1.13.2-... 4.0K 226.0K/s 00:00:00 [#########################################################] 100%
renderproto-0.9.3-2... 16.7K 86.4K/s 00:00:00 [#########################################################] 100%
subversion-1.6.1-3-... 6.9M 118.3K/s 00:01:00 [#########################################################] 100%
:: Retrieving packages from community...
ffmpegthumbnailer-1... 64.9K 119.1K/s 00:00:01 [#########################################################] 100%
checking package integrity...
(10/10) checking for file conflicts [#########################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
dovecot: /usr/lib/dovecot/imap exists in filesystem
dovecot: /usr/lib/dovecot/pop3 exists in filesystem
Errors occurred, no packages were upgraded.
Should I remove /usr/lib/dovecot/imap and /usr/libdovecot/pop3 and continue the upgrade, or is there a problem with a package?
Jay
Last edited by jt512 (2009-04-18 17:32:31)

Abelian wrote:
http://www.archlinux.org/news/444/
yaourt -Syuf should do it
next time don't do it again.
just pacman -Sf package and then pacman -Su

While upgrading Mac App Store Kindle I get the 'The product distribution file could not be verified. It may be damaged or was not signed.' message. How to fix it?

While upgrading Kindle from Mac App Store I get the message 'The product distribution file could not be verified. It may be damaged or was not signed.' How can I fix it?

Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.

My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

1. Should be possible to do that; go to the Utilities menu and select 'reset password' before starting the installer. (while booted from the DVD of course)
2. Standard installation of SL only replaces system components; applications, user data and preference settings should not be affected.
3. But you do have a backup just in case, don't you?

Upgrade File Conflicts (with Pacman -Syu)

When I do a pacman -Syu, I get the following error message:
checking for file conflicts...
error: the following file conflicts were found:
ncurses: /usr/share/terminfo/s/screen-256color: exists in filesystem
ncurses: /usr/share/terminfo/s/screen-256color-bce: exists in filesystem
errors occurred, no packages were upgraded.
Hmm.. Any ideas on how to get around this error?
Rob

I just saw the answer in the News. Upgrade screen first. Then upgrade ncurses. I will give that a try.
Rob

Ruby-cairo upgrade file conflicts [solved]

I did a 'pacman -Su' and it tried to upgrade ruby-cairo but it then bombed out due to file conflicts. If I do a 'pacman -Qu ruby-cairo' it says the package does not exist, even though I'm pretty sure I installed it in the past and hence why there are file conflicts. Should I force the upgrade or are there better ways to solve this?
Here's the output from pacman -Su
Targets (5): bluez-4.79-2 libx11-1.3.5-2 pixman-0.20.0-1 ruby-cairo-1.10.0-1 ruby-pango-0.90.5-3
Total Download Size: 0.00 MB
Total Installed Size: 18.27 MB
Proceed with installation? [Y/n] y
checking package integrity...
(5/5) checking for file conflicts [#######################################################################################################] 100%
error: failed to commit transaction (conflicting files)
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/color.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/colors.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/constants.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/blur.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/circle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/color.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/path.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/rectangle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/triangle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/paper.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/papers.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/path.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/point.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/x86_64-linux/cairo.so exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/x86_64-linux/rb_cairo.h exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by skip (2010-11-19 11:04:03)

farrel@ages ~ $ pacman -Qo /usr/lib/ruby/site_ruby/1.9.1/cairo.rb
/usr/lib/ruby/site_ruby/1.9.1/cairo.rb is owned by ruby-rcairo 1.8.0-2
So there's ruby-rcairo (what I have installed) and ruby-cairo which is what it's trying to install. I can probably just remove ruby-rcairo and install ruby-cairo.
Last edited by skip (2010-11-19 10:59:05)

I lost my back up files while upgrading my ipod what do i do to find them?

I lost my data while upgrading my ipod touch how do i get it back?

By restoring from backup. For how see:
iOS: How to back up
If you restore from backup via iTunes the apps have to be in the iTunes library since the apps are not in the backup.

Issue while upgrading SBP 11.2.0.3.5 - 201303 to 11.2.0.3.9 - 201402V3

Hi,
while upgrading Oracle SBP 11.2.0.3.5 - 201303 to 11.2.0.3.9 - 201402V3 facing issue as follows
After finishing command $ORACLE_HOME/MOPatch/mopatch.sh -d -s SAP11203V3P_1402-20009977.ZIP
Link Status:
Link script not executed due to patch installation failures.
Please check the log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_05_02-15-02-04.log
for details. Resolve the problems. Re-start MOPatch to execute
the link script or execute it manually as
/bin/sh "./link.seskasap011.sh"
there are some failed patched found in the logs
Skipped 2 of 104 patches due to patch conflicts:
SAP11203V3P_1402-20009977.ZIP!17540582!17540582
    conflicts with: 11837095 12693573 12918738 13628002 13784384 13906412 13947840 14264364 14309390 14511876 15827841 15878275 15980576 16084707 16210371 16291679 163
57019 16359540
    OPatch log file:
$ORACLE_HOME/cfgtoollogs/opatch/opatch2014-05-02_15-03-26PM_1.log
SAP11203V3P_1402-20009977.ZIP!17239632
    conflicts with: 12693573
also foung below type of error in the log file
“”Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktfb.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktfb.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktsx.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktsx.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/tbsdrv.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/tbsdrv.o'””
when i try appling single patch using OPatch, it is not getting applied
Please suggest
Regards,
Narayana
+91 8374424972

Hi Janos,
Copy files from another Oracle Software is not a wise idea. Even if this would work, it is an unsupported way. No one could predict what would happen later on.
I said to rsync the file systems not to copy specific files, If you rsync the file system (Oracle_home) it syncs all the binaries without any difference between source and target. It doesn't require uninstallation and re-installation of Oracle.
Deinstalling and reinstalling the Oracle Software is the most easiest and quickest supported way
I did this rsync even on new systems where Oracle was not installed, it worked all the times without any issue.
Never mind - It is just another solution to resolve the issue and not to challenge
Regards,
Nick Loy

[useless, SOLVED] Pacman shows package corrupted while upgrading

I pacman -Syu'ed my system after a week & there was these error of cyclic dependancy while installing gcc package. So, I issued this command:
sudo pacman -S gcc gcc-libs gcc-ada gcc-fortran gcc-objc libtool
While instaling, it showed that gcc's package is corrupted.
But, later I tried installing it using
sudo pacman -U gcc-4.6.2-1-x86_64.pkg.tar.xz gcc-libs-4.6.2-1-x86_64.pkg.tar.xz gcc-ada-4.6.2-1-x86_64.pkg.tar.xz gcc-fortran-4.6.2-1-x86_64.pkg.tar.xz gcc-objc-4.6.2-1-x86_64.pkg.tar.xz libtool-2.4
and it installed correctly.
It seems like local repo had the wrong md5 of the gcc package. How come?
Last edited by shadyabhi (2011-11-04 13:44:01)

karol wrote:Can you post the exact output, the 'corrupted' message?
shadyabhi@archlinux ~ $ sudo pacman -S gcc
warning: gcc-4.6.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): gcc-4.6.2-1 [17.03 MB]
Total Download Size: 0.00 MB
Total Installed Size: 67.22 MB
Proceed with installation? [Y/n] Y
:: File gcc-4.6.2-1-x86_64.pkg.tar.xz is corrupted. Do you want to delete it? [Y/n] ^C [----------------------------------------------------------------] 0%
Interrupt signal received
shadyabhi@archlinux ~ $ sudo pacman -U /var/cache/pacman/pkg/gcc-4.6.2-1-x86_64.pkg.tar.xz
warning: gcc-4.6.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): gcc-4.6.2-1 [17.06 MB]
Total Download Size: 0.00 MB
Total Installed Size: 66.82 MB
Proceed with installation? [Y/n] Y
(1/1) checking package integrity [################################################################] 100%
(1/1) checking for file conflicts [################################################################] 100%
(1/1) upgrading gcc [################################################################] 100%
shadyabhi@archlinux ~ $
I was successful in installing that same package if I used -U option. Thats some serious bug in pacman which should be looked into.
Please tell me as to what more info should I provide to be of more help.
Last edited by shadyabhi (2011-11-04 13:19:15)

[Solved] ABS built kernel package file conflicts

Index» Kernel & Hardware
Hello-
I am starting a new thread since my previous post was to an ancient thread (sorry, I hadn't noted the date).
I built a custom kernel using ABS, attempting to follow https://wiki.archlinux.org/index.php/Cu … n_with_ABS notes
However the notes regarding _kernelname and pkgname don't seem to match up with the formatting or idea of the PKGBUILD file provided by abs.
Instead of following the wiki, i followed the instruction provided by the PKGBUILD by commenting out the default line and uncommenting/modifying the second line.
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
The result was a package with conflicting files:
loading packages...
resolving dependencies...
:: Proceed with installation? [Y/n]
Packages (1): linux-iwlwifidebug-3.12.1-1
Total Installed Size: 68.98 MiB
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
error: failed to commit transaction (conflicting files)
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/extramodules exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/kernel/arch/x86/crypto/ablk_helper.ko.gz exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/kernel/arch/x86/crypto/aes-x86_64.ko.gz exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.softdep exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.symbols exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.symbols.bin exists in filesystem
linux-iwlwifidebug: /usr/src/linux-3.12.1-1-ARCH/vmlinux exists in filesystem
Errors occurred, no packages were upgraded.
In the thread that was closed due to being too old (https://bbs.archlinux.org/viewtopic.php?pid=234004), jasonwryan noted:
"pkgbase is for split packages, you need pkgname:
_kernelname="-foo"
pkgname=linux-foo
pkgver=3.12.1
pkgrel=1
_srcname=linux-3.12
pkgdesc="The ${pkgname} kernel and modules"
" and you can see that he also changed kernelname.
Which jives with the doc https://wiki.archlinux.org/index.php/Cu … n_with_ABS, which notes
Modify pkgname and _kernelname for your custom package name, e.g.:
_kernelname="-custom" # custom suffix, eg., 3.12.1-1-custom
pkgname=linux-custom # custom package name, eg., vmlinuz-linux-custom
Looking at the logic that is provided by jasonwryan and the doc, I need pkgname and _kernelname to be different than default- however these are defined in PKGBUILD as being based on pkgbase, and it is much cleaner to update the one line that the PKGBUILD maintainer seemed to want us to update.
_kernelname=${pkgbase#linux}
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
Note that the # symbol strips 'linux' from the front of pkgbase assigns it to _kernelname, while pkgname is a list
[dylan@zenbook linux]$ pkgbase=linux-iwlwifidebug
[dylan@zenbook linux]$ echo $pkgbase
linux-iwlwifidebug
[dylan@zenbook linux]$ _kernelname=${pkgbase#linux}
[dylan@zenbook linux]$ echo $_kernelname
-iwlwifidebug
[dylan@zenbook linux]$ pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
[dylan@zenbook linux]$ echo ${pkgname[@]}
linux-iwlwifidebug linux-iwlwifidebug-headers linux-iwlwifidebug-docs
So far so good - we have a pkgname and _kernelname which are both non default.
And to show this, I've created a package by just changing the pkgbase, which shows that it changes both the pkgname and the _kernelname:
Change of pkgbase:
[dylan@zenbook linux]$ grep pkgbase= PKGBUILD
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
Package Names Set
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
_package${_p#${pkgbase}}
done
Ouput Package Name
[dylan@zenbook linux]$ ls -l *.xz
-rw-r--r-- 1 dylan dylan 76384600 Nov 26 18:54 linux-3.12.tar.xz
-rw-r--r-- 1 dylan dylan 52329112 Nov 26 20:16 linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 4378564 Nov 26 20:17 linux-iwlwifidebug-docs-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 6139092 Nov 26 20:17 linux-iwlwifidebug-headers-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 6620 Nov 26 18:54 patch-3.12.1.xz
_kernelname sets information in package
[dylan@zenbook linux]$ grep -e provides PKGBUILD | grep _kernelname
provides=("kernel26${_kernelname}=${pkgver}")
provides=("kernel26${_kernelname}-headers=${pkgver}")
provides=("kernel26${_kernelname}-docs=${pkgver}")
Which can be seen here
[dylan@zenbook linux]$ pacman -Qpi linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz | grep -i provides
Provides : kernel26-iwlwifidebug=3.12.1
So, what is going wrong?
So the root problem comes to the install path of the files, not the pkgname or the _kernelname, as I have shown above I believe.
What I found is that changing the pkgrel led to a working install, with the files installed into separate directories.
pkgrel is modified in the Makefile directly
[dylan@zenbook linux.working]$ grep pkgrel PKGBUILD
pkgrel=2
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
This leads to a package that can be installed, because the directory path includes the -2 rather than -1
Before changing pkgrel, i had this
[dylan@zenbook linux]$ pacman -Qpl linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz | tail -2
linux-iwlwifidebug /usr/src/linux-3.12.1-1-ARCH/
linux-iwlwifidebug /usr/src/linux-3.12.1-1-ARCH/vmlinux
After changing (but keeping default name for package)
[dylan@zenbook linux.working]$ pacman -Qpl linux-3.12.1-2-x86_64.pkg.tar.xz | tail -2
linux /usr/src/linux-3.12.1-2-ARCH/
linux /usr/src/linux-3.12.1-2-ARCH/vmlinux
Where does the package directory tree get defined?
The only place pkgrel gets touched is in a re-write of the kernel makefile:
[dylan@zenbook linux.working]$ grep pkgrel PKGBUILD
pkgrel=2
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
Where it gets set, then tied to KERNELVERSION
[dylan@zenbook linux.working]$ grep EXTRAVERSION src/linux-3.12/Makefile
EXTRAVERSION = -2
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Which appears to only be exported for some source tree stuff
[dylan@zenbook linux.working]$ grep KERNELVERSION src/linux-3.12/Makefile
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
@echo $(KERNELVERSION)
And not at all in pkgbuild
[dylan@zenbook linux.working]$ grep KERNELVERSION PKGBUILD
[dylan@zenbook linux.working]$
What am i missing here?
Is there a bug that should be changing some headers in the Makefile to create a different directory structure for the packages, by passing in the _kernelname, pkgname, or pkgbase?
Last edited by thenextdon13 (2013-11-27 22:10:44)

pkgbuild is default from abs with only pkgbase changed;
I don't see a way to attach files, so will put entire code content here
# $Id: PKGBUILD 200210 2013-11-22 12:19:58Z tpowa $
# Maintainer: Tobias Powalowski <[email protected]>
# Maintainer: Thomas Baechler <[email protected]>
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
_srcname=linux-3.12
pkgver=3.12.1
pkgrel=1
arch=('i686' 'x86_64')
url="http://www.kernel.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
"[url]http://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz[/url]"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
'linux.preset'
'change-default-console-loglevel.patch'
'criu-no-expert.patch')
md5sums=('cc6ee608854e0da4b64f6c1ff8b6398c'
'5a8cb5a659baeeb6df3fe22de8d32df6'
'798bca5d2f0a1505c9b86a5227a2b339'
'8fa6cbb28dda5a4b38730c7f728e1845'
'eb14dcfd80c00852ef81ded6e826826a'
'98beb36f9b8cf16e58de2483ea9985e3'
'd50c1ac47394e9aec637002ef3392bd1')
_kernelname=${pkgbase#linux}
# module.symbols md5sums
# x86_64
# 2fd43e3edc671c61e043a5c0b3b2a1f0 /lib/modules/3.12.0-1-ARCH/modules.symbols
# i686
# e98940249665dbfa380cfdbbacf6c6b8 /lib/modules/3.12.0-1-ARCH/modules.symbols
prepare() {
cd "${srcdir}/${_srcname}"
# add upstream patch
patch -p1 -i "${srcdir}/patch-${pkgver}"
# add latest fixes from stable queue, if needed
# [url]http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git[/url]
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: [url]https://lkml.org/lkml/2011/7/26/227)[/url]
patch -Np1 -i "${srcdir}/change-default-console-loglevel.patch"
# allow criu without expert option set
# patch from fedora
patch -Np1 -i "${srcdir}/criu-no-expert.patch"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
fi
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
build() {
cd "${srcdir}/${_srcname}"
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
yes "" | make config >/dev/null
# save configuration for later reuse
if [ "${CARCH}" = "x86_64" ]; then
cat .config > "${startdir}/config.x86_64.last"
else
cat .config > "${startdir}/config.last"
fi
# stop here
# this is useful to configure the kernel
#msg "Stopping build"; return 1
# build!
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
_package() {
pkgdesc="The ${pkgbase/linux/Linux} kernel and modules"
[ "${pkgbase}" = "linux" ] && groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
provides=("kernel26${_kernelname}=${pkgver}")
conflicts=("kernel26${_kernelname}")
replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgbase}.preset")
install=linux.install
cd "${srcdir}/${_srcname}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
_basekernel=${_kernver%%-*}
_basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
sed \
-e "1s|'linux.*'|'${pkgbase}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
# Now we call depmod...
depmod -b "$pkgdir" -F System.map "$_kernver"
# move module tree /lib -> /usr/lib
mv "$pkgdir/lib" "$pkgdir/usr"
_package-headers() {
pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-headers=${pkgver}")
conflicts=("kernel26${_kernelname}-headers")
replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${pkgdir}/usr/lib/modules/${_kernver}"
ln -sf ../../../src/linux-${_kernver} build
cd "${srcdir}/${_srcname}"
install -D -m644 Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/src/linux-${_kernver}/.config"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
# add headers for lirc package
# pci
for i in bt8xx cx88 saa7134; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/pci/${i}"
cp -a drivers/media/pci/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/pci/${i}"
done
# usb
for i in cpia2 em28xx pwc sn9c102; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/${i}"
cp -a drivers/media/usb/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/${i}"
done
# i2c
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c"
cp drivers/media/i2c/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
for i in cx25840; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/${i}"
cp -a drivers/media/i2c/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/${i}"
done
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# [url]http://bugs.archlinux.org/task/9912[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core/"
# and...
# [url]http://bugs.archlinux.org/task/11194[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
# add dvb headers for [url]http://mcentral.de/hg/~mrec/em28xx-new[/url]
# in reference to:
# [url]http://bugs.archlinux.org/task/13146[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
# add dvb headers
# in reference to:
# [url]http://bugs.archlinux.org/task/20402[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
done
chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
_package-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-docs=${pkgver}")
conflicts=("kernel26${_kernelname}-docs")
replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/${_srcname}"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}"
cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
_package${_p#${pkgbase}}
done
# vim:set ts=8 sts=2 sw=2 et:

Unable to proceed with upgrade utility while upgrading from 10g to 11g

We have installed Weblogic server,configured the domain also performed the schema creation using the RCU and Installaed OBIEE 11.1.1.6.
But while running the the upgrade assistance utility facing the following error:
UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
Indicating no Oracle instance is found.
Full log file details from upgrade utility log:
ua2013-04-12-17-17-11PM.log
========
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Plug in Name : BIEE
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Display Name : Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Checking string translations
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] String translation check finished
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine components.
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine BIEE.
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] MBean connection made : service:jmx:t3://localhost:7001/jndi/weblogic.management.mbeanservers.domainruntime
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] RPD = D:\SampleSales\samplesales.rpd
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] upgrade exception occurred
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining BIEE with status: Failure.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining components.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to list upgradeable items.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Component name: Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] No upgrade items found
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished listing upgradeable items.
[2013-04-12T17:22:14.546-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Upgrade was canceled by the user.
===================
Topology.xml file details:
============
<?xml version='1.0' encoding='UTF-8'?>
<topology xmlns='http://www.oracle.com/fmw-nonj2ee-topology'>
<ias-instance id="instance2" oracle-home="D:\OBIEE_Middlewarehome\Oracle_BI1" instancehome="
D:\OBIEE_Middlewarehome\instances\instance2" host="PEPWAP06411.corp.pep.pvt" port="9501">
<ias-component id="coreapplication_obijh1" type="OracleBIJavaHostComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_java_host"/>
<property name="originalAllocatedPort" value="9810"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obisch1" type="OracleBISchedulerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9708"/>
<property name="originalAllocatedScriptRPCPort" value="9707"/>
<property name="EMTargetType" value="oracle_bi_scheduler"/>
<property name="originalAllocatedPort" value="9705"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obis1" type="OracleBIServerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9701"/>
<property name="EMTargetType" value="oracle_bi_server"/>
<property name="originalAllocatedPort" value="9703"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obips1" type="OracleBIPresentationServicesComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_presentation_services"/>
<property name="originalAllocatedPort" value="9710"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obiccs1" type="OracleBIClusterControllerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9700"/>
<property name="EMTargetType" value="oracle_bi_cluster_controller"/>
<property name="originalAllocatedPort" value="9706"/>
</em-properties>
</ias-component>
</ias-instance>
</topology>
================
Please help.
Thank you.
Regards,
MAK
Edited by: 1000104 on Apr 15, 2013 7:42 AM

There's a dedicated Web logic forum (WebLogic Portal where you might get better assistance. As i can't move your thread, please close this one and post your issue again in the web logic forum.
Thanks,
Klaus

File conflict while upgrading initscripts

Similar Messages

Maybe you are looking for