File content comparison
hi all,
how to compare the contents of two files are same or not.Will FileReader will do ?is it so time consuming?any other alternative.
note:
both the file may have large numbers of data's, say like 50,000 records.
Barath v
File Reading is done in Bytes. U need to Store the Bytes and probably do the Comparison with the Bytes read from other File.
Hope it helps,
Cheers,
Manja
Similar Messages
-
FIle Content Conversion Problem in IDOC-XI-File Scenario
Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
PrabhatIf u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy -
File Content Conversion Problem
Hi
I have a flat file having 10 fileds with fixed length of field 7 characters
abc bcd dce cef ecf fgi
123 234 343 233 434 343
322 222 222 222 222 222
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
As per the client req I'm going with FCC. The file is picking fine with the FILE. But not picking with the FCC.
The parameters which I gave are as follows.
SOURCE I feel it is fine since file is picking fine and keeping the same for FCC also.
PROCESSING
QOS -- Exactly Once
Poll Interval -- 10
Processing Mode -- Delete
Empty-File Handling -- Process empty files
CONTENT CONVERSION Parameters
Document Name -- (am giving sender data type name) DT_send
Document NSpace -- http://OTO-Continue.com
Recordset Name -- SEND
Recordset Structure -- SEND,*
Recordset Sequence -- Ascending
Recordset per Message -- 0
And in the table the parameters am settings are
SEND.fieldNames abc,bcd,cde,def,efg,ghk
SEND.fieldFixedLengths 7,7,7,7,7,7 (because each and every field has 7 characters)
SEND.keepIncompleteFields No
SEND.fieldFixedLengthType char
SEND.fieldContentFormatting trim
SEND.fieldEndSeparator 'nl'
This was the configuration. But this is not working I monitored the Communication Channel and file is not reading and not getting deleting.
What actually went wrong in above configuration. Why it is not working.
Thanks.Hi Swarna,
CONTENT CONVERSION Parameters
Document Name -- ?
DocumentNSpace -- ?
Recordset Name -- ?
Recordset Structure -- ?
Recordset Sequence -- Ascending
Recordset per Message -- ?
Document Name - <Message Type> eg:- (MT_ABC)
DocumentNSpace - Name space of your MT
Recordset Name - The root node( Which has one occurence)
Recordset Structure - The parent node of the fields(can have multiple occurences)
Recordset Sequence -- Ascending
Recordset per Message -- 1/* (No.of records per each record set)
In your structure
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
There is no root node, so in your FCC you need to mention your RecordsetName and you can ignoreRecordSetName in result structure. Check the following blog simulates your requirement.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
Regards,
Prasanna -
How to display file contents on a web page
On unix platform I have created a class that can read the contents of a file and display them to the standard output. But now i want to display these file contents on a web page through jsp. On JSP code I have imported this class and want to assign a record from a file and write it to the screen using html. I think the class needs to be modified in order to return the string record read from a file so that im able to access it from a jsp and assign it to a variable the I can display it on the screen. Can someone help me with these code?
Actually, you mean Linksys. BIG difference there.
Linksys Business Series was accumulated into Cisco Small Business, since it was purpose built for small business, not residential/consumer grade.
The new PVC2300 actually are Cisco branded on the case.
The collateral you seek is protected by the business unit that supplies it, since it was placed on a portal that only Cisco registered partners can access.
As I wrote, I already checked with the BU and they told me thats where it lives and not to hand it out. I cannot override that.
I am not sure there are any secrets in there, but I dont make the rules, sorry.
Do you want to be a Cisco Partner? Sign up and gain access to everything you need to sell Cisco successfully to end customers? If you tell me your geography (city/state/zip, I will have an ICAM call you and help recruit you.....
Steve D
Systems Engineer
U.S. Partner Sales team
RTP, N.C. -
How to store file content in BLOB field MySql database using java
Hi!
i want to store the file content in a BLOB field in MySql database using java.
Please help me out..........
thanx in advance...
byei stored images in db, and retrieved them. like that cant i store pdf file in db, and retrieve it back using oracle db?
Plz help me out how to put a file in db. i need complete code. thanks in advance. -
How to print PDF file content from ABAP in background?
Hi,
Is it possible to print PDF file content from ABAP in background?
I have some PDF content which I need to print it, these PDF files are generated outside the SAP.
Please have you any suggestions?
Thank you
Tomas<b><u>Solution:</u></b><br>
<br>
The target output device must support PDF print, this is only one limitation.<br>
<br>
REPORT z_print_pdf.
TYPE-POOLS: abap, srmgs.
PARAMETERS: p_prnds LIKE tsp01-rqdest OBLIGATORY DEFAULT 'LOCL',
p_fname TYPE file_table-filename OBLIGATORY LOWER CASE,
p_ncopi TYPE rspocopies OBLIGATORY DEFAULT '1',
p_immed AS CHECKBOX.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
DATA: lv_rc TYPE i,
lv_filter TYPE string.
DATA: lt_files TYPE filetable.
FIELD-SYMBOLS: <fs_file> LIKE LINE OF lt_files.
CONCATENATE 'PDF (*.pdf)|*.pdf|' cl_gui_frontend_services=>filetype_all INTO lv_filter.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
file_filter = lv_filter
CHANGING
file_table = lt_files
rc = lv_rc
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0 AND lv_rc EQ 0.
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
ENDIF.
READ TABLE lt_files ASSIGNING <fs_file> INDEX 1.
IF sy-subrc EQ 0.
p_fname = <fs_file>-filename.
ENDIF.
AT SELECTION-SCREEN.
DATA: lv_name TYPE string,
lv_result TYPE boolean.
lv_name = p_fname.
CALL METHOD cl_gui_frontend_services=>file_exist
EXPORTING
file = lv_name
RECEIVING
result = lv_result
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
ENDIF.
IF lv_result NE abap_true.
MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
ENDIF.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM process.
FORM process.
DATA: lv_name TYPE string,
lv_size TYPE i,
lv_data TYPE xstring,
lv_retcode TYPE i.
DATA: lt_file TYPE srmgs_bin_content.
lv_name = p_fname.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = lv_name
filetype = 'BIN'
IMPORTING
filelength = lv_size
CHANGING
data_tab = lt_file
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
MESSAGE 'Read file error!' TYPE 'E' DISPLAY LIKE 'S'.
ENDIF.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = lv_size
IMPORTING
buffer = lv_data
TABLES
binary_tab = lt_file
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE 'Binary conversion error!' TYPE 'E' DISPLAY LIKE 'S'.
ENDIF.
PERFORM print USING p_prnds lv_data CHANGING lv_retcode.
IF lv_retcode EQ 0.
WRITE: / 'Print OK' COLOR COL_POSITIVE.
ELSE.
WRITE: / 'Print ERROR' COLOR COL_NEGATIVE.
ENDIF.
ENDFORM. " PROCESS
FORM print USING iv_prndst TYPE rspopname
iv_content TYPE xstring
CHANGING ev_retcode TYPE i.
DATA: lv_handle TYPE sy-tabix,
lv_spoolid TYPE rspoid,
lv_partname TYPE adspart,
lv_globaldir TYPE text1024,
lv_dstfile TYPE text1024,
lv_filesize TYPE i,
lv_pages TYPE i.
CLEAR: ev_retcode.
CALL FUNCTION 'ADS_SR_OPEN'
EXPORTING
dest = iv_prndst
doctype = 'ADSP'
copies = p_ncopi
immediate_print = p_immed
auto_delete = 'X'
IMPORTING
handle = lv_handle
spoolid = lv_spoolid
partname = lv_partname
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
CALL FUNCTION 'ADS_GET_PATH'
IMPORTING
ads_path = lv_globaldir.
CONCATENATE lv_globaldir '/' lv_partname '.pdf' INTO lv_dstfile.
OPEN DATASET lv_dstfile FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
TRANSFER iv_content TO lv_dstfile.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
CLOSE DATASET lv_dstfile.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
CALL FUNCTION 'ZBAP_RM_PDF_GET_PAGES'
EXPORTING
iv_content = iv_content
IMPORTING
ev_pages = lv_pages.
lv_filesize = XSTRLEN( iv_content ).
CALL FUNCTION 'ADS_SR_CONFIRM'
EXPORTING
handle = lv_handle
partname = lv_partname
size = lv_filesize
pages = lv_pages
no_pdf = ' '
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
CALL FUNCTION 'ADS_SR_CLOSE'
EXPORTING
handle = lv_handle
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
ev_retcode = 4.
RETURN.
ENDIF.
ENDFORM. " PRINT -
How to append contents to an existing file contents at the end of file?
Hi all
I am Kiran, working with LV8.0 FDS
I find difficulty while trying to add new file contents(some messages) to an existing file at the end /begining of a file.
Whenever i try to do that,it is replacing the previous contents,but i dont need that. i want the contents to be appended.
Plz suggest me.
thanks & regards
kiranHi Kiran,
yes, I can attach a screenshot
(open file, set file position to end, write text, close file)
Message Edited by GerdW on 08-16-2007 03:19 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
append.png 2 KB -
How to view the file content from the directory? getting Error:ORA-21560
SQL> create directory READ_LOB_DIR as 'D:\Prj\Comm\Data';
CREATE OR REPLACE Procedure READ_FILE_LOB IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(500);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_seb, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
l_sum := l_end - l_pos - 1;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
The Text file content is...
Copyright 1996,2001 Oracle Corporation. All Rights Reserved
This file contains installation instructions for installing the
Oracle8 ODBC Driver software.
It is divided into four parts:
o Part I: Summary of systems supported by Oracle8 ODBC client
software
Lists the platforms on which the Oracle8 ODBC Client software can
be installed.
o Part II: Oracle8 ODBC Driver software.
Describes the files, and installation prerequisites for the Oracle8
ODBC driver software.
o Part III: Exploding the kit onto your system
Describes how to explode the kit onto your system hard drive.
o Part IV: Installation Instructions
Describes how to install the Oracle8 ODBC driver.
Part I: Systems supported by the Oracle8 client software
You can install the ODBC client software on any of the following systems:
o Windows 2000
o Windows NT X86
o Windows 95
o Windows 98
The Oracle8 ODBC Driver provides support for ODBC connections
from Windows 2000, Windows NT, Windows 95, and Windows 98 systems
to Oracle databases.
o Part II: Oracle8 ODBC Driver software.
Refer to the following files for information about the Oracle8 ODBC Driver:
LICENSE.TXT - Oracle8 ODBC Driver License Agreement. Read carefully
before installing and/or using this product. Enclosed in
your software distribution kit.
SQORA.HLP - A Window's Help file which is the primary reference
manual for the Oracle8 ODBC Driver.
ODBCRelnotes.WRI - The release notes for the Oracle8 ODBC Driver
which contains information which may have not been
included in the Help file.
Installation Prerequisites
See the Oracle8 ODBC Driver release notes (ODBCRelnotes.WRI),
for a complete list of software products required and their versions.
Time Required
The installation of the Oracle8 ODBC Driver takes approximately 5
minutes. The actual time may be shorter or longer, depending upon
your hardware configuration.
Disk Space Required
The Oracle8 ODBC driver installation requires approximately 2
megabytes of available storage space. The space required depends upon
what files you already have installed. The installation procedure
checks to see if you have enough available disk space. If you do not,
the installation fails.
Part III: Exploding the Kit onto your system
Expand the self-extracting archive file onto your hard drive.
C:\> ORA8174.EXE
Part IV: Installation Instructions
Oracle8 ODBC Driver 8.1.7.4.0
This section assumes the following:
1. MS Windows 2000, Windows NT, Windows 95 or Windows 98 is running.
2. Oracle Universal Installer shipping with 8.1.7 has already been
installed on your system.
3. Part III has been completed.
Software fixes:
Refer to release notes (ODBCRelnotes.wri) for a complete list of
Software fixes.
Installation Instructions
Once the self-extracting archive file ORA8174.EXE has been
exploded it will create an installable directory structure
onto your hard drive. Run the Oracle Universal Installer from
your local drive.
1. On the screen "File Locations" use the "Browse" button of
the source path to choose the file 'products.jar' from the
folder that ORA8174.EXE was extracted to. Choose 'Next'.
2. You will receive a warning that some of the dependencies of
this product are not found in the staging area. This warning
is OK. The ODBC driver depends on the Net8 Client being already
installed on the system. Answer 'Yes' to continue.
Oracle is a registered trademark of Oracle Corporation.
Microsoft, MS are registered trademarks of Microsoft Corporation.
Microsoft Windows, Windows NT, Windows 95, Windows 98 and Open Database
Connectivity are trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property
of their respective owners.
The output was...
File testfile.txt in Directory READ_LOB_DIR exists
Copyright
1996,2001
Oracle
Corporation.
All
Rights
Reserved
This
file
contains
installation
instructions
for
installing
the
Oracle8
ODBC
Driver
software.
It
is
divided
into
four
parts:
o
Part
I:
Summary
of
systems
supported
by
Oracle8
ODBC
client
Error:ORA-21560: argument 2 is null, invalid, or out of range
I want to diplay/view as per file content format from the file under that specified directory.
Have any other method / any help or suggestions would be really appreciated.I changed the code like...
CREATE OR REPLACE Procedure READ_FILE_LOB_tmp IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(4000);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
Now its working fine with one addtional line...
The file content is...
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
But The output was...
File testfile.txt in Directory READ_LOB_DIR exists
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
here, i want to delete that additonal line...? -
How to download a file/contents through a session bean to the bean client
Hi All,
I'm a newbie to enterprise beans and facing a problem. I have a requirement where an excel file saved on the server will be a accessed by a session bean and return it to the bean client (developed in swing). Client will display the file contents, user edits the contents and saves. Pressing the save button will save the excel on the server again using the same session bean.
As far as displaying the contents of excel on the form/panel is concerned I have developed this part and able to load files and save them on my local machine.
But my main requirement is to load it through Session Bean and then save it back on the server. An EJB 2.0 code snippet addressing this part would be a great help.
Thanks,and where's the problem?
I see 2 EJB calls, one to retrieve the data and another one to send it back to the server.
That's the simplest scenario, easy to implement using a stateless session bean (though if you want to prevent concurrent modification of the file there's a bit more work to do, like keeping a record of open files).
A more complex solution would have the client send only the changes to the file (for network performance reasons maybe) and have the EJB merge those in some way with the original document.
Complex, possibly error prone, probably not worth the effort.
First scenario should pose no problem if you're familiar with Java and have a passing familiarity with EJB. -
How to find out if file contents under some document library SPListItem has changed
hi,
I am building a Sync tool which will Sync SharePoint document library to some other service(e.g. FTP). I have added event handlers on the document library for ItemAdded, ItemUpdated etc.. etc.
Now i have one problem, when ever a file is updated (either custom properties and/or file content) then there is no way to check if its updating of content or custom fields. So everytime i need to upload my file to that FTP location. I want to get some indication
that this time file content is updated not the custom fields, or file content with custom fields are updated.
I have checked After and Before properties but its of no use. When ever you rename a file or just open the edit dialogbox and save it without updating any thing, all after and before properties are same :(
Need some solution for this, any help suggestion is appriciated.
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USASorry for late reply.
1st link (storing file hash/MD5) is not a solution for me as i have many Office documents
2nd link doesnt have nay answers
Archive Folder is not a solution. How can i find if current item SPFile has content changes?
I already have my custom fields with each SPListItem. How can i find in itemUpdating/ed that if file content is changed? to make my custom field ture?
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USA -
Create a group based on file contents
Hello!
I'm investigating options to create a dynamic group based on periodic check of file content. I have a Shavlik updater which is patching custom groups based on file contents. I would like to create a dynamic group which should return all Windows Computer
classes that are found from this file. Anything close to sensible was found at https://www.youtube.com/watch?v=gxASdzHFTOU where author created an attribute of based on "SELECT * FROM CIM_DataFile" and then created a group out from it - but it checks
file existence, not content, would launch against all Windows Clients (and we have 1000+ of these monitored) - certainly not a valid way.
Is there any way I could do that in a simple, straightforward way?
Thanks in advanceOk, I got it. Have you tried modifying the group membership with powershell?
Modifying Explicit Group Membership in SCOM 2012 with PowerShell
http://blogs.msdn.com/b/rslaten/archive/2013/06/27/modifying-explicit-group-membership-in-scom-2012-with-powershell.aspx
Automate your group creation with Powershell
http://blog.coretech.dk/kra/automate-your-group-creation-with-powershell/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem in file content conversion from XML to CSV
Hi Experts,
I am finding problem in file content conversion. I need to convert the following XML file into CSV file:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_CROSS_REF xmlns:ns0="urn:dabur:idoc2file:pos">
<Update_type>2</Update_type>
<PLU>00000000</PLU>
<Cross_ref_PLU>7777777</Cross_ref_PLU>
<Capture_PLU />
<Package_size />
<Package_desc />
</ns0:MT_CROSS_REF>
The output file data has to be like:
2,00000000,7777777,,,,
The problem I am facing is while specifying the content conversion parameters in communication channel i dont know what recordset structure i should mention as all the records are directly under root. If I mention recordset structure as "ns0:MT_CROSS_REF" and parameters as
ns0:MT_CROSS_REF.fieldSeparator ,
ns0:MT_CROSS_REF.endSeparator 'nl'
i get error in communication channel monitoring and no file is posted.
Please help me as to what correct parameter i should mention in my case.
Thanks,
Regards,
YashHi Chirag,
I cannot change the xml file as it comes after mapping idoc to a message type. How can I add ROOT in the xml? My message type is like MT_CROSS_REF and it has those 6 fields as in the XML (Update_type, PLU etc.). I do the mapping of these fields from a IDOC and get the XML.
I hope you got my point.
Thanks,
Yash -
Can we compare file contents of two files in the Application server?
Hi,
A file is generated daily to the application server. and i need to compare the generated file to the file generated on the previous day and prepare a report.
Can we compare file contents of two generated files present in the Application server?
If there is any alternative, please suggest.
regards
csyes we can compare if the app server is Unix.
cmp compare two binary files and report if different
cmp is silent if the files are the
same;
if they differ, the byte and line number at which the first
difference occurred is reported.
REPORT ZUNIX line-size 400
no standard page heading.
data: unixcom like rlgrap-filename.
unixcom = 'cmp file1 file2'.
data: begin of tabl occurs 500,
line(400),
end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
"if the files are different then you will some content in tabl
Regards
Viajy Babu Dudla -
Hi,
I have a problem to transfer a XML file content to a MS SQL database by a given/fixed stored procedure. I'm able to transfer the content of the file by using following method ...
hstmt = DBPrepareSQL (hdbc, EXEC usp_InsertReport '<Report> ..... </Report>');
resCode = DBExecutePreparedSQL (hstmt);
resCode = DBClosePreparedSQL (hstmt);
... but in this case I'm not able to fetch the return value of the stored procedure!
I have tried to follow the example of the stored procedure in the help documentation (DBPrepareSQL) but I miss a datatype for xml?!?
Any idea how to solve my problem?
KR Cake
Solved!
Go to Solution.After some additional trials I found a solution by calling the stored procedure in this way
DBSetAttributeDefault (hdbc, ATTR_DB_COMMAND_TYPE, DB_COMMAND_STORED_PROC);
DBPrepareSQL (hdbc, "usp_InsertReport");
DBCreateParamInt (hstmt, "", DB_PARAM_RETURN_VALUE, -1);
DBCreateParamChar (hstmt, "XMLCONTENT", DB_PARAM_INPUT, sz_Buffer, (int) strlen(sz_Buffer) + 1 );
DBExecutePreparedSQL (hstmt);
DBClosePreparedSQL (hstmt);
DBGetParamInt (hstmt, 1, &s32_TestId);
where sz_Buffer is my xml file content and s32_TestID the return value of the stored procdure (usp_InsertReport(@XMLCONTENT XML))
Now I face the problem, that DBCreateParamChar limits the buffer size to 8000 Bytes.
Any idea to by-pass this shortage?? -
Complex file content conversion in case of CSV file
Hi Friends,
What you see below is generated from Excel i.e excel file saved as CSV file. This file i need to map in XI.
Problem is i have to take only the data and not the header part.
for e.g in this particular line
Employee ID :,,E00315
I need only E0315 and not the header value. Similarly i have to find some solution to map all the required data.
Please suggest me how to use file content conversion in such scenarios.
Solution is required on top priority. Points will be immdly rewarded.
Thanks & Regards
K.Ramesh
,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee ID :,,E00315,,,Sale Order No / Line Item :,,,SO123456,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee Name :,,K.RAMESH,,,Client Name :,,,NCLIENTELE,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Month / Week :,,Jul-08,,,Project Name :,,,Internal Project,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sales Team :,,,,,Project Role Start date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Location :,,BANGALORE,,,Project Role End date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sl. No.,Date,Day,AA Type, Task Description,,,,,No.of Hours,Remarks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,7/1/2008,Tue,0814-Talent acquitision,task 1,,,,,12.00,rmk 1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2,7/2/2008,Wed,0814-Talent acquitision,task 2,,,,,10.00,rmk 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
3,7/3/2008,Thu,0814-Talent acquitision,task 3,,,,,12.00,rmk 3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
4,7/4/2008,Fri,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5,7/5/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6,7/6/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
7,7/7/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
8,7/8/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,,,,,,,
9,7/9/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
10,7/10/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
11,7/11/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
12,7/12/2008,Sat,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13,7/13/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,
14,7/14/2008,Mon,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15,7/15/2008,Tue,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16,7/16/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17,7/17/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
18,7/18/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19,7/19/2008,Sat,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
20,7/20/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
21,7/21/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
22,7/22/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
23,7/23/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
24,7/24/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
25,7/25/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
26,7/26/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
27,7/27/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
28,7/28/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
29,7/29/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
30,7/30/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
31,7/31/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Prepared By:,,,,,Approved By:,Company Project Manager,,,,Client Project Manager,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Name,,K.RAMESH,,,Name,YYY,,,,ZZZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Signature,,,,,Signature,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Date ,,31.07.2008,,,Date ,31.07.2008,,,,31.07.2008,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Hi,
In this CSV file, what all i need is the value E00315 after the label Employee ID. I used in FCC the parameters u asked me to do. Also in the Document Offset i gave value 3 so that the first three lines are ignored.
1,,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,Employee ID :,E00315
But still i am getting the error
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 4 according to structure 'tims_header':java.lang.Exception: ERROR in configuration / structure 'tims_header.': More elements in file csv structure than field names specified!
Please help.
Thanks
Ramesh
Maybe you are looking for
-
Buffer busy waits after cnanging lob storage to oracle securefiles
Hi Everyone I need help resolving a problem with buffer busy waits in for a lob segment using securefiles for storage. During the load the application inserts a record into a table with the lob segment and update the record after, populating lob data
-
Webclient Configuration Problem
Hi, I have created a configuratio for role IC_agent with role config key 'ZW_rolekey' and object type and subobject type. I had removed a few assingment blocks from that configuration, but when i open the browser, those assignment blocks are still vi
-
I made a program work while my database was in /var/mysql/lib directory...But now I need to make my project work from another computer, so I have to save that database with my project. Where do I save it? What would be the line instead of con = Drive
-
What is the use vss in java and how to use it?
can i know what is vss in java and how to use it and also can you tell me related vss like svs? and what are tools for configuration in real we will use? am i student i want to know these all?
-
Database is hosed - 10G 10.1.0
Disclaimers: I am still learning what everything is & does so have patience with me. Also, this is a test environment that I was attempting to port a database from Sybase so the overall loss is negligible. However, this might be a good time to learn