File content conversion for Receiver File

Hi,
I am using SAP PI 7.1
i am facing an error in the receiver file when using FCC.
my file structure is as below:
MT_file             1.....1
Itab_out          0.....1
     item             0.....unbounded
      STR            0....1
so in the receiver File C.C, i am giving the following FCC parameters:
item.fieldSeparator             'nl'
item.fieldFixedLengths        255
item.fieldNames                   STR
But i am getting the following error in Receiver CC
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '*.fieldSeparator' is missing *
pls let me know what could be the problem

Hello,
Define your FCC parameters as shown below.
Recordset Structure         Itab_out,item
item.endSeparator             'nl'
item.fieldFixedLengths        255
Itab_out.fieldSeparator       'nl'
Note: You can either use field separator or fixed length both can't be used at same time.
Regards,
Sarvesh

Similar Messages

Hierarchy on file content conversion for receiver?

Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>051</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>051</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005010</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005011</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00005</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00002</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>061</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>061</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005012</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005013</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005014</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00006</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00003</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...

Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header   (1-1)
detail   (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header   (1-1)
..detail   (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu

Query on Content conversion for Receiver SFTP Adapter

Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.

Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass

File content conversion for receiver file structure(fixed length)

Hi Experts,
I am tryinng reciver file FCC for the following strcuture. it seems I have done some wrong configuration,and failing at conversion level. so experts please help me to get the correct content conversion parameters.
note : ( * Nothing can be altered at repository side * ) and the fields are fixed in length so the file needs to be fixed lentgh format.
Tree--Occ--
TYPE
SBLSALDATA--1..1--
SBLSALDATA
SALDATA----
1..1
Headrec----
1..1
XXX----
1..1
XXX----
1..1
XXX----
1..1
TotalDatarec----
1..Unbounded
YYY----
1..1
YYY----
1..1
YYY----
1..1
YYY----
1..1
LASTREC----
1..1
ZZZ----
1..1
ZZZ----
1..1
Thanks in advance.

I have done in the same procedure as in above link. its not working either.
My receiver structure looks like below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TaxData xmlns:ns1="urn:XXXXXXXX">
<EmpTaxDat>
<Header>
   <A/>
   <B/>
   <c/>
</Header>
<Detail>
   <D/>
   <e/>
   <f/>
</Detail>
<Trail>
   <g/>
   <h/>
   <i/>
</Trail>
</EmpTaxDat>
</ns1:TaxData>
Edited by: Harish.k on Jan 2, 2010 2:15 PM

Idoc 2 file - file content conversion in receiver

Hi,
My scenario is idoc to file.
if i want to use file content conversion at receiver side,
so i need to create record set according to sender side data type or receiver data type?
plz give some inputs reg. this.
Thanks

Hi,
There is problem while refreshing in sap xi also.
when i pass new parameter like 7 in my recordset structure,
it is immediately reflecting in CC monitoring.
error it is showing that '7'.
but if i remove that in record set structure
(after activating that in ID)
even though
if i stop and start my CC manually also,
still it is showing that error in CC monitoring
like '7'
basic concept of this file content conversion is
I have to keep at least field separator (ie 'nl' )for outer most node element ie Customer_copy and record set stru. as Customer_copy
is it right?
I tried my own way...still it is giving that error.
what could my fieldSeparator, endSeparator, for ur last case plz tell me?
Edited by: ruban R on Apr 22, 2008 3:01 AM

Content Conversion for Sending Communication Channel using File Protocol

I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please Help

Hi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

File content conversion in receiver

Hi,
My receiver Message type structure is
Heading1
subheading 1
    FieldValue1
    FieldValue 2
    Fieldvalue3
I want to create file content conversion in receiver side.
plz help me to create what could be my recordset structure, name, value.
my scenario is Idoc to file.

Ruban:
Your FCC goes like this
subheading1.fieldSeparator = ','               /* if comma is the separator you want, if u need any other replace it*/
subheading1.endSeparator = 'nl'
Did you check my previous post in your other thread, I posted similar example there.

File Content Conversion for Unequal Number of Columns

Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure                      : TOTALSET,*
TOTALSET.fieldNames                 : ITEMSET
ignoreRecordsetName                   : true
TOTALSET.fieldSeparator              : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
Srinivas

Hi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET         (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start)       (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN    because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM

Content conversion for multilevel varying structure File to Idoc

Hi All,
I have following file structure.
VO
C1
S1 1 to unbounded
     H1 1 to unbounded
          D1 0 to unbounded
          D2 0 to unbounded
          U2 0 to unbounded
          UC 0 to unbounded
My Idoc structure.
ISU_EL34
     IDOC 0 to unbounded
          E1ISU34 1 to unbounded
               ZSEGMENT 0 to 1
I have applied the content conversion for the length specific file as follows.
Recordset structure: VO,1,C1,1,S1,1,H1,1,D1,,D2,,U2,,UC,
Do I need to do any changes over here to satisfy the above file structure.
V0 and C1 occurs only once in a file.
for S1 I should have H1 compulsory and others are optional, but i need to create Idoc when D1 data is available only.
I'm able to read the total file with the above content conversion.
MY requirements:
1) I need to create the Idoc based on the occurance of D1 node. I'm using H1 data also in the idoc not S1.
2) My doubt is whether the content conversion I have provide is applicable to the structure I have prepared.
3) When I'm trying useOneAsMany function for the above ie H1 data should repeat in Idoc as and when D1 repeats.I'm failing the error is both queues are not contain same number of data..
Could anyone suggest how I should approach for the above scenario.

Hi Sravya,
It is really helpfull answer , Thanks for sharing my problem .
It worked for this purpose, but I'm facing following problems
MY scenario
The file contains records V0,C1,S1,H1,D1,D2,U2 and Uc
In which Im using the data of H1,D1,D2,U2 and UC for creating target Idoc.
Every H1 contains at least 1 D1 record, If D1 exists D2 ,U2 and UC may or may not exist.If exists those are in a sequence and should consider the data of them to create Idoc.
Idoc should be created for every D1.
Problem facing:
Do we have any mechanism to group the D1 records to the relevant header.since Im unable do this with content conversion.
I think bcz of above problem; some records (D2 & U2 & UC) data is populating in Idoc even there is no D2,U2 and Ucs.
Thanks,
venu.

Poulate the header levels fields in Content Conversion in receiver FAdapter

Hi All,
I have req in that there is table stucture , this table strcture I want to populate the header level and item level also at receiver side. I am using Content Conversion at receiver side.
the data is like this
at header level
Country      City       Name   Age
India           bom       kk        19
Sweden    Stock     GG       20
for this type file How can I create the datatype and In wht way I will use content conversion for this.wht paramters I have to give in in Content Conversion.......
Regards

HI Sudip,
the field labels I want in excel file at top or header of every coloum are)
Country City Name Age
below these fields only the value of these fields will come like this
India bom kk 19
Sweden Stock GG 20
for this u mean to say I have to declare only header
Create Data Type with sub-element ITEMS(just an example)
Then Country,Name,Age or whatever field you want to add in header of output file.
Once data type is ready now time to configure Receiver CC:
Use following Content Conversion Parameters:
Recordset Structure: ITEMS
ITEMS.addHeaderLine: 1
ITEMS.fieldSeparator: (space)
ITEMS.endSeparator: 'nl'
and my data will come like this in file
Country    City            Name    Age
India          Banglore   jjjjj          24
England     london      kkkk      88
Can u plz cofirm for this...........
Regards

Content Conversion in Receiver

Hi,
This is my target structure which i need to convert to text file. (File Content Conversion)
<b>Header1 1-1(Occurence)</b>
   |_
      Field1 1-1 (Occurence)
      Field2 1-1 (Occurence)
<b>Header2 1-1(Occurence)</b>
    |_
       Field3 1-1 (Occurence)
       Field4 1-1 (Occurence)
<b>Header3 1-1(Occurence)</b>
     |_
        Field5 1-1(Occurence)
<b>Header4 1-Unbounded(Occurence)</b>
    |_
      <i><b>SubHeader1 1-1 (Occurence)</b></i>
        |_
           Field6 1-1(Occurence)
      <i><b>SubHeader2 1-1 (Occurence)</b></i>
        |_
           Field7 1-1(Occurence)
      <i><b>Subheader3 1-Unbounded(Occurence)</b></i>
         |_
            Field8 1-1(Occurence)
            Field9 1-1(Occurence)
      <i><b>Subheader4 1-1</b></i>
         |_
            Field10 1-1 (Occurence)
<b>Header5 1-1 (Occurence)</b>
    |_
       Field11 1-1 (Occurence)
The target structure must be converted to a text fiel in the following format:
Header1
Header2
Header3
Subheader1
SubHeader2
SubHeader3(Repeats)
Subheader4
Subheader1
Subheader2
Subheader3(Repeats)
Subheader4
Header5
I have to make use of File Content Conversion. Please guide me as I am new to XI.
Thank you very much.
BestRegards,
Prits

For File Content Conversion in receiver file adapter, please refer to the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
I believe the file adapter support for two level of structure, in your case,
header1
subline1
subline2
should be OK. But need you to have some trial.
--Wenning

Content Conversion in receiver channel

Hi all,
I have a proxy to FTP scenario with no mapping involved.Over proxy communication PI is receiving the data, I am creating the CSV file using content conversion in receiver channel and placing the file at FTP.
The file name is coming in one of the field of the input xml,I am using variable substitution and setting the file name from that particular field value.But as I don't want that node and file name element in my output file content, please guide me what parameters can I set in my content conversion to remove the FileNode from o/p csv file.
The sample input xml is
<MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
I want output xml to be like
1,2
3,4
I have followed this blog /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12 to cut the FileNode, but it gives an error in cc parameters.
In my actual i/p payload,the Record is 0..unbounded and there are 50 sub elements inside Record element.
Please provide your inputs.
Thanks,
Ruchi

Hi Ruchi,
Change your structure like this.
MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
Dont put the filenode under Record.
Also Add the below parameters.
FileNode.fieldSeparator     '0'
FileNode.endSeparator     '0'
FileNode.fieldFixedLengths     0
FileNode.fixedLengthTooShortHandling     Cut
FileNode.fieldNames     FileName
Now use the same parameter mentioned in the blog .Your problem will be resolved.

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

Receiver File content conversion for multi level hireachy

Receiver channel file content conversion..
this is SAP proxy to FIle Scenario, which will get invoice details from SAP along with multiple invoice texts for each invoice.
I would like to have below mentioned payload at Target side,
<MT_Invoice>
<File Header>    1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</MT_Invoice>
for the above payload file should come as mentioned below
customer invoices 12/02/2010
invocie number1 customer no 1
invoice no1-text1
invoice no1-text2
invocie number2 customer no 2
invoice no2-text1
invoice no2-text2
invoice no2-text3
invocie number3 customer no 3
invoice no3-text1
have a great day
For to get the above payloadI have create a message type like
MT_invoice
header   1...1
   f1         1
   f2         1
invoice details   0... unbound
   f1           1
   f2           1
invoice text     0.... unbound
   f1
footer       1...1
   f1          1
Please correct me if my message type declaration was wrong...
Please suggest how do i need to approach for message mapping and as well as FCC in File adapter...
Edited by: Vidyadhar Kurmala on Dec 2, 2010 10:28 AM

It is not possible to create alternating nodes in graphical mapping tool.
I recommend using the MessageTransformBean for FCC, as this supports a 2-level hierarchy.
Then you add a node record like this:
<MT_Invoice>
<Record>
<File Header> 1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
</Record>
<Record>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
</Record>
<Record>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
</Record>
<Record>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</Record>
</MT_Invoice>

File content conversion for Receiver File

Similar Messages

Maybe you are looking for