File Content Convertion
HI Experts,
My scenario was Idoc to File.
*Issue: I had mapped Source idoc with A,B,C,D fields.
I want only A,B,C at final structure.*
I cannot ignore D field in message mapping as i am using that field for file name Substitution in receiver communivcation channel target file name.
In my receiver CC i have given,
XX01.fieldNames: A,B,C
But still i am getting A,B,C,D in target structure.
thanks in advance
Hi,
You have to set the file name in header message field instead of entering in payload message field. Doing that
you avoid creating D node in message mapping.
Then, it is the same using variable sustituion in File Receiver adapter.
To recovery this value, follow this link. (Advanced Tab Page
Variable Substitution (Target Directory/File Name Scheme))
http://help.sap.com/saphelp_nw04s/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Carlos
Similar Messages
-
File content convertion for multi mapping occurance 1:N
Hi ALL,
In my scenario i have used multimapping means 1:N,
In my scenario the sender is file adapter and receiver is JMS adapter.
My requirement is that i have to pick the file from respective directory path...
through file content convertion
For example below is the structure when the sender file adpater pickes the flat file..through File content convertion....
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_BookingConfirmation xmlns:ns1="urn:agrp:ml">
<Recordset>
<BOOKING_REQCON_ROU>
<RECORD_TYPE>ROU</RECORD_TYPE>
<SENDER_ID>AS.MAN</SENDER_ID>
<RECEIVER_ID>abcd.99018293</RECEIVER_ID>
</BOOKING_REQCON_ROU>
</Recordset>
</ns:mt_BookingConfirmation>
But the structure of the source which i have in the mpping is as below,you can see the diffrence and this diffrence we will get automatically when we change the occurances of the target structure.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:mt_BookingConfirmation xmlns:ns1="urn:agrp:ml">
<Recordset>
<BOOKING_REQCON_ROU>
<RECORD_TYPE>ROU</RECORD_TYPE>
<SENDER_ID>AS.MAN</SENDER_ID>
<RECEIVER_ID>abcd.99018293</RECEIVER_ID>
</BOOKING_REQCON_ROU>
</Recordset>
</ns1:mt_BookingConfirmation>
</ns0:Message1>
</ns0:Messages>
because of this diffrence in the structure... the picked file could not able to pass ttrough from the message mapping.Because of this error is throwned in the SXMB_MONI
Please if some one know how to do the file content convertion for this type of diffrent structure.
Please let me know ASAP.
Thanks in advance...
Best Regards,
Aravind.PujariHi,
Check Below links.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward Points if Helpful -
Problem in File content Convertion ?
Hi experts,
i have a probelm in file content convertion......iam geting flat file with tab delimiter so how to convert it?
Name.filedSeperator under this how to pass the vaule....please send docs on file content convertion.
Note:helpfull answer will be rewarded.
regards,
phaniHi;
Have a look
help link for Receiver file adapter (FCC) - http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
These are a collection of blogs on content conversion (both receiver and sender)
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Mudit -
Issue with Sender File Adapter file content convertion
Hi Everybody,
I am facing an issue in FCC at the sender side.
Below is sender text message which contains 9 rows.Each row represents one node in the source structure.
ROUASIS.MLASIS.A02001COMASN1.1.2
HDR7072396166N^MAEU/SZH3PA288200707248IF07082007090311CAFXSYATFXS^20070903
PPL5705150010506YAT254915402713586045162543971730000002723.000C2750000000024.1602007081120070903^^
SIM3020070711^20070730Y^^^00
CONTTNU946652840CN0579566 7335
CTN100069350800012609166209.850.08068.5830.4838.10
DTL520^01
CTN200069350800012609173209.850.08068.5830.4838.10
DTL520^01
In the above message CTN row is repeating after each DTL because of which i am getting the error.
<b>Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation</b>
Can somebody help me out in resolving this issue.
Thanks in Advance,
ArvindHi Arvind
plas use the following parametes in the sender communication channel.
i have tried one scenario
my source structure is like that:
data (0..unbounded)
record (0..unbounded)
key (1..1)
fname (1..1)
lname (1..1)
age (1..1)
detail (0..unbounded)
key (1..1)
salary (1..1)
empid (1..1)
so use the following parameters at the sender side
document name: messge type name
document namespace: ur message type namespace
Recordset name: data(as per according to my source structure)
RecordsetStructure: record,,detail,
recordsetsequence: variable
recordsetpermessage: *
keyfieldname: key
and different parameters:
RECORD.fieldSeparator ,
RECORD.fieldNames KEY,FNAME,LNAME,AGE
RECORD.keyFieldValue 1
DETAIL.fieldSeparator ,
DETAIL.fieldNames KEY,SALARY,EMPID
DETAIL.fieldNames 2
if you still have the problem pleas reply back.
Thanks
Rinku -
FILE CONTENT CONVERTION HELP...?
Hi folks,
can anyone help mre giving file content conversion parameters for the below example.
case 1 : ID, NAME, AGE
201, ABCDE,25
for the above case we use row.fieldNames, row.fieldSeperator, row.endSeperator.
but if the case is like below.
case 2 : ID,"NAME1,NAME2",AGE
202,"ABC,DEF",26
what content parameters should be use for the above case. Here field seperator is expected between the quote's.
thanks in advance.
Srinivas reddyHi,
If you want to use NAME1 & NAME2 as single field then use xml.enclosureSign=" and xml.enclosureSignEsc=" " in your FCC.
u can also refer http://help.sap.com/saphelp_nw04/helpdata/EN/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
& How to solve extra commas in CSV files in FCC..!!
Reg,
NJ
Edited by: nishu jain on Apr 7, 2010 10:49 AM
Edited by: nishu jain on Apr 7, 2010 10:49 AM -
I am getting error (java.lang.exception)in RWB in component monitoring of sender side file NFS adapter
number of arguments in Row.fileldFixedLength does not match with no of fields in Row.fieldNames.
My file is , seperated with 5 fileds
Row.filedNames ename,eno,performrate,ratedesc,effecivedate
Row.fieldSeperator ,
i used 'nl' as newline character
Can anybody please give the reason for the errorHi
1)You should not use Both fieldFixedLengths and fieldSeparator together in FCC.
2)Since it is case-sensitive beware of spelling mistake
so
Row.fieldNames=ename,eno,performrate,ratedesc,effecivedate
Row.fieldSeperator=,
Row.endSeperator='nl'
Flat File to Flat File (FTP) Part 1
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Flat File to Flat File (FTP) Part 2
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) -
File Content Conversion i.e Flat file 2 Flat file
Hi guys,
I am new 2 SAP XI
and i am trying 2 do "Flat File To Flat File".
Input File contains following data:
Name:varun
Surname:rajaraman
Address:B-2
Employee no:8204
i.e Each Data is in separate Row.
Output File Should contain the following data:
I am varun rajaraman staying at B-2 bearing employee no. 8204.
(name,surname) (address) (Employee No.)
i.e data should be in a single row.
So, i have a problem of reading the data from input file i.e data from each row and transfering it into output file along with which i need 2 insert "i am " ,"staying at", etc.
pls tell me the procedure in detail.
Thanks and regards
santhosh rajaramanHi,
Check this links for file content convertion.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward Points if Helpful -
File Content Conversion in Sender File
how to convert a fixed length flat file without end seperator sent to XI to a xml form?
Pleasegive me the idea of Sender Adapter configuration details (esp endSeperator)Hi,
For file content convertion if there are fixed lenth then no need to give the feildseperator,just give the fixed lenths for all the feild in FCC.
check below links for FCC
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani.
Reward Points If Helpful -
Problems in File Content Conversion
Hello,
I am trying to convert a text file to an XML using File Content Conversion in XI 3.0.
The incoming text file gets picked up but no message is sent and hence no message is received in the monitor.I get the following log-
<b>Success</b> Channel FILE_SENDER_XML_1: Entire file content converted to XML format
<b>Warning</b> Channel FILE_SENDER_XML_1: Empty document found. Proceed without sending message
<b>Success</b> File "C:\xi_public\i033066\dme_in.txt" deleted after processing
Can somebody help me on this
Thanks
SandeepHello,
I am not sure of why the empty Payload is created.
I have the following TXT file -
<b>LINE 1</b> 01 22 Sandeep ASKDJKLASD HDFC Bank 12342 asdasd 123569
<b>LINE 2</b> 02 22 Sagar 23123 ICICI 4234 ASDASD 254636 12304 ASDAsdqwe
<b>LIME 3</b> 03 22 1 12304
Ignore 'Lines' above.They are not part of the file.
I have given the following parameters -
<b>Document Name -</b> SampleMessageType
<b>Document Namespace -</b> http://sandeep/xi/bpm_example
<b>Recordset Name -</b> Header,Item,Trailer
<b>Recordset Namespace -</b> http://sandeep/xi/bpm_example
<b>Record Structure -</b> Header,,Item,,Trailer,*
<b>Recordset Sequence -</b> Ascending
<b>Key Field Name -</b> Record Type
<b>Key Field Type -</b> String(Case Sensitive)
<b>Header.fieldFixedLengths</b> 3,4,15,20,15,15,20,10
<b>Header.fieldNames</b> RecordType,RecordLength,CompanyName,CompanyAddress,BankName,BankCode,BankAddress,AccountNumber
<b>Header.processFieldNames</b> fromConfiguration
<b>Header.keyFieldValue</b> 01
<b>Header.lastFieldsOptional</b> YES
<b>Item.fieldFixedLengths</b> 3,4,15,20,15,15,15,10,6,10
<b>Item.fieldNames</b> RecordType,RecordLength,BeneficiaryName,BeneficiaryAddress,BankName,BankCode,BankAddress,AccountNumber,Amount,NoteToPayee
<b>Item.processFieldNames</b> fromConfiguration
<b>Item.keyFieldValue</b> 02
<b>Item.lastFieldsOptional</b> YES
<b>Trailer.fieldFixedLengths</b> 3,4,6,6
<b>Trailer.fieldNames</b> RecordType,RecordLength,TotalRecords,TotalAmount
<b>Trailer.processFieldNames</b> fromConfiguration
<b>Trailer.keyFieldValue</b> 03
<b>Trailer.lastFieldsOptional</b> YES
If I don't give these parameters then channel will give me errors.I don't know what other parameter to give to create a file.
I had tried the same thing with the following and it worked
<b>Document Name -</b> SampleMessageType
<b>Document Namespace -</b> http://sandeep/xi/bpm_example
<b>Record Structure -</b> Substr,*
<b>Recordset Sequence -</b> Ascending
<b>Key Field Name -</b> Record Type
<b>Key Field Type -</b> String(Case Sensitive)
<b>Substr.fieldFixedLengths</b> 3,4,15,20,15,15,20,10,3,4,15,20,15,15,15,10,6,10,3,4,6,6
<b>Substr.fieldNames</b> RecordType,RecordLength,CompanyName,CompanyAddress,BankName,BankCode,BankAddress,AccountNumber,RecordType,RecordLength,BeneficiaryName,BeneficiaryAddress,BankName,BankCode,BankAddress,AccountNumber,Amount,NoteToPayee,RecordType,RecordLength,TotalRecords,TotalAmount
<b>Substr.processFieldNames</b> fromConfiguration
<b>Substr.keyFieldValue</b> 01
<b>Substr.lastFieldsOptional</b> YES
But the problem here is my mapping has the Header,Item and Trailer as the structure names but he XML created here will be like
<?xml version="1.0" encoding="utf-8" ?>
- <ns:SampleMessageType xmlns:ns="http://sandeep/xi/bpm_example">
- <Recordset>
- <Substr>
<RecordType>21</RecordType>
<RecordLength>22</RecordLength>
<CompanyName>Sandeep</CompanyName>
<CompanyAddress>ASKDJKLASD</CompanyAddress>
<BankName>HDFC Bank</BankName>
<BankCode>12342</BankCode>
<BankAddress>asdasd</BankAddress>
<AccountNumber>123569</AccountNumber>
</Substr>
- <Substr>
<RecordType>02</RecordType>
<RecordLength>22</RecordLength>
<CompanyName>Sagar</CompanyName>
<CompanyAddress>23123</CompanyAddress>
<BankName>ICICI</BankName>
<BankCode>4234</BankCode>
<BankAddress>ASDASD 25463</BankAddress>
<AccountNumber>6 12304</AccountNumber>
<RecordType>AS</RecordType>
<RecordLength>DAsd</RecordLength>
</Substr>
- <Substr>
<RecordType>03</RecordType>
<RecordLength>22 1</RecordLength>
</Substr>
</Recordset>
</ns:SampleMessageType>
In this case my mapping fails
Thanks,
Sandeep -
File Content Conversion: Empty File
Dear Experts,
I'm doing a file to file scenario with FCC. My file gets picked up from the source folder but the communication channel doesn't send the file for processing ahead. This is the error I get in Communication channel monitoring:
Channel Send_Acceptance_File: Entire file content converted to XML format
2008-10-10 12:09:38| Warning |Channel Send_Acceptance_File: Empty document found. Proceed without sending message
2008-10-10 12:09:38| Success |Confirmation mode test found. File will be resent next time
I don't see any entry in sxmb_moni.
What could be the possible reason for this.
Thanks and Regards,
MerrillyHi Merrily
Problem is with your FCC.
Are you using Key field in FCC with and keyFieldInStructure as ignore?
This problem arises due to incorrect keys or Data type mis match for the record structure in FCC.
Thanks
Gaurav -
Problem with File content conversion and parameters
Hi experts,
What is the use of file content conversion that is available in file adapter? For what cases we can use it?
What do the different content conversion parameters mean?
Kindly help
Thanks
GopalHi,
We use the file content convertion to conver the flat file that is text file into XML,
File adapter cant understand the format the file is,so we have to declare the content convertion parameters.
Check some links which will tell how the convertion is done.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if helpful -
Hi Question about Sender File Content Conversion
Hi All,
I have a flat file i need convert that flat file to the below XML format using File content Conversion, can anybody help me on this with example File content Convertion parameters
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FileSend xmlns:ns0="http://test">
<Recordset>
<Contact>
<Name>ABC</Name>
<Number>123</Number>
<Address>
<HouseNumber>246789</HouseNumber>
<StreetNumber>100</StreetNumber>
<Phone>
<Mobile>90000000</Mobile>
<LandLine>12345678</LandLine>
</Phone>
</Address>
<Email>
<Office></Office>
<Personal></Personal>
</Email>
</Contact>
</Recordset>
</ns0:MT_FileSend>Hi Sudheer reddy,
Good question.
File content conversion parameters are:
1) Doccument Name: Doccument name is nothing but message type name for file side: MT_FileSend
2) Doccument Namespace: mention the name space for the message type.
3) Doccument Offset: for which row and which coloumn doccument has to be write.
4) recordset name: mention the record set name: Recordset
5) Recordset Namespace: if the namespace is different for message type name space mention name space or otherwise it is blank.
6) Recordset Structure: Mention the structure name
7) Recordset Sequence: mention the sequence of the recordset Ascending or Decending
8) Recordset permessage: Would define no of record sets per message.
9) Key-field name: to query to the doccument
10) Key field type: string(Case-senstive)
fieldValues
fieldSeparator
endSeparator
Note: pls check in SDN about file content conversions it so many blogs are available, u can easily understand.
Regards,
Sateesh -
File Content Conversion : Recordset Structure with * not reading file
Hallo all,
we have the following problem.
we implemented a scenario as sown in this blog
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
but there is a problem.
If the file structure is declared as :
Header,1,Items,*
then the adapter does not even read the file from the directory (so I assume that for some reason the file structure is not as expected).
If on the other had the structured is declared as :
Header,1,Items,3
everything works.
Obviously though, this is not satisfying since we need variable cardinalities.
Here is an example :
I have a specific file in a standard directory, called xi_input.
The file is edited straight into that directory, so there can't be filename errors etc.
If the file is left empty :
Nothing happens . No message of any kind in sxmb_moni/monitoring xml messages .
If the file contains the following (data is random) , where 'H' is the key for the header and 'I' is the key for the items :
H 20060403 16 3 316001 kapou lalla morellala 20060403 F3 23
I 277101010 2
I 277101011 3
I 277101012 4
There are to cases :
if the file structure is declared as :
Header,1,Items,*
Then nothing happens .
If on the other had the structured is declared as :
Header,1,Items,3
everything works .
Any suggestions and help is appreciated
Thank you .Actually yes, there is an error message :
Error 5/30/08 3:12:45 PM fda9d3c5-4775-4df8-17b8-dfd14191171d
Retry interval started. Length: 5.0 seconds
Error 5/30/08 3:12:45 PM fda9d3c5-4775-4df8-17b8-dfd14191171d
Could not archive file 'E:\tmp\NetBeauty\In\xi_input.dat' after processing
5/30/08 3:12:45 PM Processing started
And the details are :
2008-05-30 16:07:00 Success Channel CC_File_adapter: Entire file content converted to XML format
2008-05-30 16:07:00 Warning Channel CC_File_adapter: Empty document found. Proceed without sending message
2008-05-30 16:07:00 Error Attempt to archive file "E:\tmp\NetBeauty\In\xi_input.dat" after processing failed. Retry
Only that they don't look very helpful. From this I only understand that the data in my input.dat file is not in the format expexced.
I Have configured key fields as :
keyfield name : keyfield
Header.fieldNames : keyfield,CreationDate,CentralCustomerCode,CustomerCode,ReferenceDocumentNumber,DeliveryPlace,Message,ReturnMessage,DeliveryDate,SalesmanCode,Rest
Items.fieldNames : keyfield,Material,Quantity
Header.keyFieldValue "H"
Items.keyFieldValue "I" -
XI File Content Conversion Issue
Peace to All,
I am having this funny problem in File Content Conversion:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:ZIN_MT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
What did I do:
DATA TYPE1.
Structure1: TESTOUT_DT Complex Type
REC Element 1-1
Name11 Element xsd:string 1-1
Name12 Element xsd:string 1-1
Structure2: TESTIN_DT Complex Type
Name21 Element xsd:string 1-1
Name22 Element xsd:string 1-1
Mapping:
name11-name21
name12-name22
Configuration of Sender File :
DocumentName : TESTOUT_DT
Document NameSpace : http:/myspace.com/test1
RecordSetName : Recordset
Recordset Structure : Rec,1
Rec.fieldNames :name11,name12
Rec.fieldSeparator :,
Rec.endSeparator :'nl'
So when I test it it picks up the file but is unable to map it to destination.
Can anyone help me to find out why?.
One more hint is that I am using Third party Business System and I use the same for both file CC sender channel and Filereceiver channel.
I will appreciate your help.
ThanksMany thanks to your guidance...SDN is the best...It worked
Moving forward I encountered another issue, when I extend it a Trail to it and end up with this mapping:
ZOUT_MT 11 -ZIN_MT 11
Recordset 1--1
Rec 1unboundedTest01 1-----unbounded
key(string) 1...1----
key 1..1(string)
name11(string) 1..1----
name21 1..1(string)
name12(string) 1..1----
name22 1..1(string)
Trail 1...1 -
Trail 1---1
key(string) 1..1 -
key 1..1(string)
test(string) 1...1 -
test1..1 (string)
In Config: Sender File CC
Doc Name :ZOUT_MT
Doc namspace : http://mytest.com/test1
RecordsetName : Recordset
Recordset Structure : Rec,*,Trail,1
Key Field Name : key
Recordset per message : 1
Rec.fieldNames : key,name11,name12
Rec.fieldSeparator : ,
Rec.endSeparator : 'nl'
Rec.processConfiguration: FromConfiguration
Rec.keyFieldValue : 1
Trail.fieldNames: key,test
Trail.endSeparator: 'nl'
Trail.processConfiguration : FromConfiguration
Trail.keyFieldValue : 1
Trail.fieldSeparator : ,
From all this work above , when I put the file having:
1,111,112
1,222,223
1,333,334
1,99
The output file in empty (null)...
Does anyone out there understand why the output file is becoming null..
here is the log I get in workbecnh (commuunication channel)
Audit Log for Message: c1a434f5-ad9f-4a26-08c1-e7d579a5927a
Time Stamp Status Description
21.01.2009 11:48:22 Success Channel ztest_sender_cc: Entire file content converted to XML format
21.01.2009 11:48:22 Warning Channel ztest_sender_cc: Empty document found. Proceed without sending message
21.01.2009 11:48:22 Success File "/mylocation/interface/SCM/somefolder/in/shilpagirlsinput.txt" deleted after processing -
Problem about file content type and firefox
Hi,
The Firefox made me mad because cant do a simple job : download a XML file. I have a big XML file that crash Firefox when try to open it,
so download may be best choice but always Firefox start to show XML files. what is the solution?
It is first, second : I make my XML file using JavaScript and show it with data URL like this : data:text/xml;...
but same not work with csv files, I want when user save csv file, Firefox save it with .csv ext not .part
plz help me fast.Hi,
We use the file content convertion to conver the flat file that is text file into XML,
File adapter cant understand the format the file is,so we have to declare the content convertion parameters.
Check some links which will tell how the convertion is done.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if helpful
Maybe you are looking for
-
Hello all. I have a few questions on the use of notes.app. 1.) Is there a size/word limit on the touch 2nd generation?, I have OS4.1 installed. 2.) My second question is where are my notes stored/synced? thanks, bill edited: -bill
-
Windows 8 - problems for accepting calls/emitting ...
Hi everybody, First, I'm not a native English speaker, so sorry if I do some mistakes... I have a big problem on my Skype. I tried many times to solve it, but without succes. The problem is, whenever I want to call someone, or to answer to a call...
-
Hello, I have a serious problem with my iPhone 4 camera. See the linked picture. What's wrong with it? Can I fix it myself? http://img822.imageshack.us/i/vada.jpg/ Tomas Message was edited by: Tomas Srna
-
HT4682 Sony HDR-CX230/B compatible with FCP X
I see that the HDR-CX230 and HDR-CX230E are listed as compatible. Is the Is the HDR-CX230/B also compatible?
-
Java swing popupmenu / context menu does not appear in secondary monitor
Main screen left second screen right swing portal application is visible on two screens. If you open a context menu (right mouse) on the right screen, the context menu open on the left (Main) screen instead of the right.