******File Conversion Issue

Hi ,
For few number of records say 20,The file Allignment is fine.
For more than 500 records the allignment is getting changed.
The File format is .OPT.Why this is happening ,any ideas?
Thanks,
Srinivasa

Hi,
Are you using the below mentioned parameters in your FCC..
Item.fieldContentFormatting = nothing
Regards,
Sarvesh

Similar Messages

Acrobat XI Pro and MS Word 2010 file conversion issues

I have created a photo journal comprised primarily of photo collages and text boxes using Microsoft Word 2010. Acrobat XI Pro is installed as well. When I "Save as Adobe PDF" the resulting PDF is missing many - not all - of the text boxes placed on top of the photos, and the some of the photos themselves are "reordered" - the one placed on top moves to the back. What might be causing this?
If I select "Save As" and then select the "PDF" option from Word's dropdown menu, the resulting PDF - which is much smaller than the one created by the "Save the Adobe PDF" option - retains all the data in the Word file, in the correct order.
Note - this did not happen when I was using Acrobat X Pro. And this file I am currently working with converted perfectly to an Adobe PDF when I was still using Acrobat X Pro.

Hi,
Can you please share your test file because the issue you mention here seems to be file specific?

Flat file conversion issue

Hi all,
I'm doing a IDOC to Flat file scenario, now after the mapping and FCC I have an output in this way:
SOLD_TO,SHIP_TO,BILL_TO,0000300623,0000300622,0000500569
But I want it in this way:
SOLD_TO,0000300623,SHIP_TO,0000300622,BILL_TO,0000500569
What should I do in FCC to get the desired output?
Thanks,
Srinivas

Suman,
MT
DT
ADDR_TYPE
EXT_ADDR_ID
These two fields I have duplicated twice each in the mapping:
MT
DT
ADDR_TYPE
SOLD_TO
ADDR_TYPE
SHIP_TO
ADDR_TYPE
BILL_TO
EXT_ADDR_ID
0000300623
EXT_ADDR_ID
0000300622
EXT_ADDR_ID
0000500569
Srini

Canon EOS t3i File Conversion Issue

Hello all,
I recently got a Canon Rebel t3i, and sat down to edit some of the material I shot in FCP 7.
After importing the files off of my SD cards directly into FCP and then organizining, making subclips, renaming etc., I was unhappy to find that after dragging clips into the timeline they did not playback correctly, dropping frames and generally screwing up.
Looking it up after the fact I found that apparently the h.264 MOVs that the t3i makes are no good in Final Cut without first converting to something like Apple ProRes. Bummer.
My question: will I need to go back and convert my files pre-FCP, as in the raw files straight off the SD card (using Compressor or the Canon plugin or whatever), or can I somehow not lose the work I have already done in naming and organizing clips in my FCP project?
Any help would be greatly appreciated!
Thanks!

You didn't even copy them off the card first? Well, that's ANOTHER bottleneck...trying to edit directly from the card.
OK, you can use the MEDIA MANAGER and the RECOMPRESS option to convert all the footage and keep the organization you have. But in the future, you need to download the Canon EOS log and transfer plugin to use this workflow: http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
or, use MPEG STREAMCLIP or Magic Bullet Grinder to convert the footage to ProREs before you edit.

Receiving file adapter content conversion issue

Guys,
Could someone please help me with a Receiving file adapter issue?
My output structure is something like this:
Vendor_file_MT (occurence 1)
--Recordset (occurence 0..unbounded)
Vendor (occurence 1)
Field1
Field2
Field3
Field73
Field74
My content conversion is very simple:
Recordset Structure: Vendor
Parameters:
Vendor.fieldFixedLengths   30,30,30, (...) ,1,27
Vendor.fixedLengthTooShortHandling   Cut
Vendor.endSeparator   'nl'
If I don't do the content conversion, it works fine, I get all the fields in the XML format.
When I do the content conversion however, I get multiple lines but only the very first field of each line.
What could be the problem? What am I missing here? Any idea?
Your help would be much appreciated.
Thanks,
Viktor

Varga:
Its little strange that its not working even after adding that. Did you check the receiver channel in your RWB for any logs. Add the statement in my previous post and Also try to clear the Cache and activate the channel again..See if it works
Glad it worked
Edited by: Guru on Apr 21, 2008 3:15 PM

Word doc file conversion error - virus or OS?

I have word documents made on the Mac and have only existed on the Mac. When double clicked, some of them will not open anymore. Office prompts to convert the file but no matter what format chosen, the converted file is no good.
This issue doesn't seem to effect all word docs. Seems like there was an Mac OS update or something that may have caused issue. The system has Parallels running XP and it was thought that might have allowed a virus or caused some corruption. (The virtual PC never had e-mail setup or Office installed.) Moving the files to another Mac provides the same results. So the files themselves seemed to have changed or it's something in the OS.
Only difference I have noticed between the two files are, the files that don't open have a file extension and the files that do open have none. The ones with no file extension I think are a legacy from an older OS version that was not as strict on having them. Adding and then removing a file extension does nothing, the OS still sees those files as Word docs.
Removing the file extension on a file that has one, does not change convert file prompt. In fact it just makes the file loose it application type so the OS doesn't know what type of file it is.
All of this was happening using Office 2008 (Word 12.3.6) so today I bought Office 2011 today to see if the issue could be resolve and got the same results.
I have read many threads on Word conversion issues but none like this one or that doesn't involve a PC. Anybody have thought or seem this? Maybe there is a work around I'm missing?
Thanks for your time.

Thank you about your XP answer. That makes sense. I would think that would be a major flaw in the Parallels product.
That leaves OS versions possibly. All these word docs were created in Office 2008 after the company got the Macs and made the switch. The only things that really changed over that time was OS upgrades and MS Office updates.
The issue only came to known last year. Inital research and current have found nothing to act on. Other issues I've read involve going between platforms and that's just not the case here. We threw the PCs out after the move.
This issue effects many files throughout our client file folders, the only differences being as I noted. Attach two JPEGs showing a good (no extension) and bad (has file extension) file info.

XML file conversion after sender file content conversion

Hi,
I have issue refarding file content conversion.
My input structure is
<MT_RCICrecords>
<TRNH>
<RCIC>
<RECH>
<RECL>
<RCIC>
<TRNH>
Afetr sender File content conversion (csv to xml) it produces xml file as below (since file conversion does not support 3rd level of hierarchy)
<TRNH>
<RECH>
</RECH>
<RECL>
</RECL>
</TRNH>
It does not recognize RCIC.
Now i am trying to map this to IDOC and getting error as
'MT_RCICRecords tag found instead of IDOC BEGIN ='.
CAn anyone suggest me how to chaage this xml output after File content conversion to add RCIC tag in xml file?
I am new to XI so please give me some sample code to.
Thanks.
Yashpal
Its urgent!

My problem is xml generated from content conversion is like below
<MT_RCICrecords>
<TRNH></TRNH>
<RECH></RECH>
<RECL></RECL>
<TRLR></TRLR>
</MT_RCICrecords>
and i want it to be
<MT_RCICrecords>
<TRNH></TRNH>
<RCIC>
<RECH></RECH>
<RECL></RECL>
</RCIC>
<TRLR></TRLR>
</MT_RCICrecords>
which is not happening
My input message structure is
MT_RCICrecords
TRNH
RCIC
RECH
RECL
i hope it is clear now
TRLR

Umlaut Conversion issue in Sender communication channel SAP PI

Hi Gurus,
We are facing issue while conversion.
umlaut Conversion issue in Sender communication channel that is reason channel not able to pic the file from the path.
Sender CC error:
Value of incoming field is too large. Segment:'IMD', Field:'7008', MaxLength:'35', value:'Plssvvkbecher LÃ¼bzer 0,4 (1280Stk p' DESCRIPTION: The length of the field value is too big !
Actually field contains 35 Chars only the value is : 'Plssvvkbecher Lübzer 0,4 (1280Stk p'
We tried with “ISO-8859-1” if the field value is less than 35 characters it is able to converting.
Please help me out from this issue.
Thank you.
Regards,
Jittu.

Hi Jittu,
Have you tried using the codepageconversion bean in the modules under the sender? It would be like:
AF_Modules/TextCodepageConversionBean with a parameter of Conversion.charset and a value of utf-8.
Regards,
Ryan Crosby

Language conversion issue in PI7.1

Hi,
My sceanrio is file to Idoc. Am facing language conversion issues.
For example one of the field in the source file is having the value "Différence sur net". And in the IDOC field the value is appearing as "DiffÃ©rence sur net".
With the same data I have done file to file scenario with and without content conversion and the output is coming correctly as "Différence sur net".
I have enabled Unicode check box in RFC destination also in XI server. But still its coming "DiffÃ©rence sur net" . Please advice how can I get the target field value same as that of the source field vale.
Can anyone help me to sort out this issue?
Thanks.
Dinesh

Hi,
In Channel try with using the File type: text and encoding : UTF-8.
I think this will solve your issue.
Thank you,
Siva

I open a donwloaded file from an e-mail and a file conversion box appears.The characters are all wierd.

I can not open a downloaded file from an e-mail or off the web w/o a file conversion box popping up.It shows options to open with msoffice word but I choose that and it opens with all the characters that are weird looking. There is also the issue where every time I open up Mozzila there are portions of advertisements that look like they are in Japanese. I go to the View in the top bar then select Character Encoding.The unicode is selected so I switch to Western (ISO-8859-1) and everything is normal. I close the browser and restart and it goes back to the way it was with the Japanese looking text.

You can convert the PDF text to regular text (.txt) and then import/open into another program and make your changes, then save the file in the programs format (for your later editing) and then choose Print from the program and there may/may not be a option to save as PDF again.
You'll need a free (limited use) PDF to text utility like
PDF OCR
http://solutions.weblite.ca/pdfocrx/
Trouble here of course is you lose all the formatting and have to reformat, but it's a lot less expensive than Adobe's software.
LibreOffice is free to use and can save as PDF format if iWork doesn't save as PDF, it should unless Apple is really peeved at Adobe.

PDF file Conversion

Hello Friends,
In SAP, SOST Transaction, we can see the pdf document of delivery, but when send to the customers by email, the pdf file doesn't open at customer end.SOST sends this
It gives the file conversion error.
What we can do from developer's perspective to solve this ?
Is this a ABAP issue?
Regards
Prashant

MOVE p_spoolno TO lv_spoolno.
* CONVERT THE SPOOL TO PDF
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = lv_spoolno
 no_dialog = lc_no_dialog
* DST_DEVICE =
* PDF_DESTINATION =
 IMPORTING
 pdf_bytecount = lv_bytecount
* PDF_SPOOLID =
* OTF_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 pdf = gt_pdf_output
 EXCEPTIONS
 err_no_otf_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_dstdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
* Transfer the 132-long strings to 255-long strings
 LOOP AT gt_pdf_output INTO wa_pdf_output.
 TRANSLATE wa_pdf_output USING ' ~'.
 CONCATENATE v_buffer wa_pdf_output INTO v_buffer.
 MODIFY gt_pdf_output FROM wa_pdf_output.
 CLEAR wa_pdf_output.
 ENDLOOP.
TO CONVERT THE DATA INTO PDF FORMAT ELSE THE PDF FILE*
WON'T OPEN & REPORT WOULD GIVE A MESSAGE THAT*
THE FILE IS DAMAGED & COULD NOT BE OPENED*
TRANSLATE v_buffer USING '~ '.
 CLEAR : wa_messg_att,
 gt_messg_att.
 DO.
 wa_messg_att = v_buffer.
 APPEND wa_messg_att TO gt_messg_att.
 SHIFT v_buffer LEFT BY 255 PLACES.
 IF v_buffer IS INITIAL.
 EXIT.
 ENDIF.
 CLEAR wa_messg_att.
 ENDDO.
ENDIF.

MTS File Conversion for iMovie

Dear Apple Support Community,
I am struggling with movie file conversions, and getting the optimum results from such a process before starting my editing work in iMovie.
I have a Canon HD camcorder which records movies according to AVCHD standards. Before using iMovie, I need to convert the .MTS files to a format which is compatible with iMovie, and I have tried the following:
Copy the files from the SD card on to my HDD.
Using Toast 11 (Titanum), I have selected different profiles to convert the file to formats such as MOV, M4V, MP4 etc.
The converted files yields a size that does not match the original one i.e. a 300 MB file after being converted, is now either 791 MB, or 96 MB in this case.
When importing the converted file into iMovie, iMovie still wants to optimize the file for some reason (I believe using APPLE INTERMEDIATE CODEC resolves the optimization issue)
Import the files directly from the SD card into iMovie, provided I have not altered the original file structure i.e. when inserting the SD card, iMovie recognizes the SD card the same way it would for connecting the Camera.When I select the videos to be imported, iMovie does so without hassles, but the files again turn out to be bigger than the original file by a factor of between 2 and 3, depending on the original file.
What is the best way to convert files to preserve the quality as close as possible to the original?
Is it normal for coverted files to be larger than the original file after being converted (smaller makes sense, but bigger just baffles me)
Thanks for any feedback!

Thanks for the great feedback.
I do have struggles though in general, part of which originates from my camera itself.
My camera still has a tendency to record an interlaced effect even though my settings are confidently selected to progressive (I have 50i and 25p to choose from - 25p is my selection).
However, when I use Toast Titanium, I have an option to select the source video to be deinterlaced, but Toast does not do a good job at deinterlacing, compared to Handbrake. The benefit of my Toast Preset is that I can covert the video to an Apple Intermediate Codec, which means that when the files are imported into iMovie, the process is rather quick.
When I convert using Handbrake, the software does a pretty **** good job at deinterlaing, but the downside is that I cannot find a preset that makes import into iMovie satisfactory.
So, in light of all this long discussion I gave, my question is really, what is the best file converter for iMovie to convert MTS files that need to be deinterlaced.
Thanks for any help!
Adios

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

Advice needed - .vob file conversion for playing on itouch

help needed and advice on best application for dvd/movie file conversion.
i want to convert .vob file so i can transfer to ipod.
seems like there are several free & pay for app's out there - any guidance as to which is the best would be appreciated.
thanks in advance

chriswalsh wrote:
.. i want to convert .vob file so i can transfer to ipod.
haven't tried for vob, but a nice lil' tool:
http://thelittleappfactory.com/evom/
another well-known converter, esp for DVD>>Apple-toys-usage is
http://handbrake.fr/ (don't worry, english spoken)
note to Mods: the latest version is NO ripper (=DRM-override), but a converter..
both free, no additional installs needed..

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

******File Conversion Issue

Similar Messages

Maybe you are looking for