File Copy to local attached Firewire "LaCie" not working any longer
Dear all,
have Updated my Mac Book to the latest 10.6.3 Release and since following is not longer working:
Copying from FinalCutPro created Quicktime *.mov Files from the internal HD via Finder to the Firewire Drive - Error Message "Der Vorgang konnte nicht abgeschlossen werden, da das Objekt „filename.mov“ in Verwendung ist."
The File is definitive not in use (I also tried it with a Copy of it - same behavior). I have tried this further with different File(sizes) - it starts copying and stops always at different timing afterwards with the same Error. Can also delete this file without any errors.
Having seen that this has also happened by some others in this forum by writing back to SMB - so removed extented attributes which seems to work with them - still no success for me.
Any ideas?
Many thanks
/Juergen
Some Update on this - Copying to another FireWire 800 attached Drive with Apple Filesystem worked. But I am still guessing what happened
Similar Messages
-
What do you use to read .stn files on mavericks? Genuine fractals doesn't work any longer? I get an error message that adobe photo shop 5 cant open it because the modules? arent right. I assume that it is because I now have an intel machine. I know other people have used this file format and so how do you open your photo files?
When I try to open in Adobe Reader is says, "Adobe Reader could not open 'Blank-AF 77-LOE.xfdl' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." Now what. I didn't email it. I transferred from an external hard drive. The file opens just fine on a Windows PC.
-
My password does not work for my IPAD any longer.
If you don't know your passcode for iPad, you have to restore your iPad as a new device in iTunes on your computer.
-
ALT Startup will not work any longer, PRAM reset will not work any longer.
Hi folks,
I just bought and plugged in my Mac Pro to a new Belkin battery back up unit yesterday, and now when I try to restart using the ALT key it will not work, it starts up to my default drive only. When I try to reset the PRAM, using the option-command P-R keys it also boots to the default drive.
Any suggestions would be appreciated.
JimTroubleshooting is sortof voodoo, if you do "a" and get response "b" then don't do it!
There have been other problems, USB hub, cable, etc.
OS X doesn't "need" PowerChute which also hasn't been updated in two years and can cause problems. APC works. APC's software for Windows is excellent though. Shame.
As for why... I'll leave that for philosophy class.
Wired keyboard? check. 1000VA or above? check. Any UPS also can have a strong EMF field around it that I guess could affect other electronics (cell phones etc and AC adapters have been known to cause problems and RFI). -
why am I no longer able to use a widget that is still available on the app site
You're best bet for third-party applications is to contact the manufacturer, if assistance in the forums does not produce good results. For the Bubble Bazinga widget, contact the manufacturer Rastaduck. I have emailed them today for this issue as well. Hopefully, they will respond with a solution. When you get to their mail page, there is a Mail option on the left.
http://www.rastaduck.org/index_en.html -
GS70 - Battery Calibration utility does not work (any longer)
Hi folks
Just got myself a brand new GS70 Stealth notebook. I got the pre-installed battery calibration utility to run OK once, but a few days laters it just quickly flashes 2 windows one after the other and is gone / crashed.
Of course it might be something I did (upgraded BIOS, drivers, installed some apps), but I still need to find out what, otherwise it might happen again even after I reset to factory settings.
I scanned all 33 threads of this forum found with the search "battery calibration", and found only one which describes something similar:
https://forum-en.msi.com/index.php?topic=165389.0;nowap
However the symptoms are not the same (I have Windows 8 and my other utilities KLM & SCM are working fine), and that thread is too old anyway. So a couple of questions to the community:
1) does anybody experience the same failed start issue, with GS70 or other?
2) can anybody advise on how to debug the battery calibration utility to try and find out where it crashed? (found no logfile)
(note: I also tried to upgrade .NET to 4.5.1 as it seems to be used, no change)
I will eventually contact MSI about this, but I thought that I would ask around first. Thanks for any help...Okay, just found the answer by myself: The battery calibration utility depends on a service "Micro Star SCM" (MSIService.exe), which I had disabled.
Setting the service start mode to "manual" was enough to solve the problem, the utility starts again.
Hope this can help someone else. -
RoboForm password manager stopped working when I updated to the latest version of Firefox. I will contact them as well but I am using rf version 6 and would have to pay (again) to update that program to version 7. This is a vital program because I use a lot of different sites and really would like to continue to use with the Firefox browser.
Thanks for your help. I had already done the "forget this device" but had forgotten about the part of entering the passcode with the keyboard in order to pair. I found my instruction sheet after I posted my cry for help and when I did the pairing procedure right, it worked. It's weird that it decided to unpair itself. Both my husband and our daughter have the same keyboard and neither of them have had this happen. At least now I know what to do if it happens in the future.
-
Hi there
So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
Can anyone help please?
Thank youThank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
All that happens is it just flicks through it all and won't play any of it???
As in I select the song and it just flicks back one screen (if I am making sense).....
I am really stuck and cannot work out what's gone wrong that's all.
Considering a reset of my new iphone and trying again but done that once and it's still the same. -
Email notifications not working any longer
It has stopped wring since the new format came in to effect.
Any fixes?
Any otter settings bar these below?Sign out of Apple Support Communities.
Restart your Mac then go here to sign in > Welcome | Apple Support Communities
Then check your email preferences.
If that didn't help, if you are using Safari to access ASC, try deleting cookies and cache.
From the Safari menu bar click Safari > Preferences then select the Privacy tab. Type Apple in the search field top right corner then click Remove All.
Now empty the cache. From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari then log back in to ASC and try your profile preferences again. -
I have recently update my computer to mavericks and my hp c4380 does not scan any longer
Hello,
I have recently updated my computer to Maveriks and my HP C4380 does not any longer scan. How can I solve this issue?
Regards,
Jacques..Thanks. Your suggestion is good but it does not allow me to scan multiple page documents and get a unique pdf file (I get as many files as there are pages in the document). With the HP scan software it was possible to do it but this software does not work any longer with Maveriks. I do hope that this problem will be solved as soon as possible.
Regards.
Jacques. -
I have a problem and if someone else knows a solution or encountered the same, some feedback would be great.
On my Z61 I experienced it sometimes when I was out for presentations that after opening the lid of the laptop and the OS recovered from sleep, the whole keyboard did not work any longer. Even such special key-combos like switching thinklight on or off did not work any longer.
The only thing I can do then is to press the power button down for some seconds to force the computer to switch off. Logically, any unsaved work is lost then. Any Ideas? I recently removed all ThinkVantage Components and then re-installed them because I was experiencing problems with the software. Now everything else works again but this keyboard switched off problem appeared again.
Message Edited by hakre on 08-04-2008 12:03 AMI have sp3, t60. From time to time my keyboard and touchpad are not working but external mouse is working. Searching through the internet i observed that this is not only my case, i assume this is XP SP3 problem.
How I am solving this: going to software manager, droping keyboard device. Here windows behavior differs from time to time, it can ask me for reboot, and can just go for reboot without any prompt. In any case after droping device i am getting keyboard working, and after several reboots touchpad starts to work.
On SP2 i had never experienced this problem. -
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?
1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact -
Search in saved preview .pdf files not working any more
When I download a .pdf file from the internet and open it in preview, the search command works ok. When this same file is saved to disk and opened again, search is not working any more. Is this a bug, or my fault. Regards Rolf
Hi,
I hope this helps...
A while back we have more than one browser running on our PC (IE, Firefox, Chrome) and we messed by how Acrobat views documents over the web.
I think that this has some relevance here, as around this time LC also started falling over previewing forms.
Now if we open LC and Acrobat is not running, the "Preview PDF" is not present or accessible. So now we fire up Acrobat before we open a form in LC Designer and the preview tab is there and functioning.
Not much of a workaround; but I am hoping that someone will have a better one!!!
Good luck,
Niall -
How do I remove or delete files and image files within a document foler? I have tried dragging the files to the trash, but that is not working.
Right-click (or ctrl-click) on a file. If the "move to Trash" option is greyed out, select "get info" and read the permissions at the bottom of the info window.
Wat are they?
Do the same for the enclosing folder - what permissions does that have? -
3 Files are in recovery modes & we are not having any backup, how to recove
3 Files are in recovery modes & we are not having any backup, how to recover.
select from v$recover_file;
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
137 ONLINE ONLINE 1.7142E+10 05-MAR-11
138 ONLINE ONLINE 1.7142E+10 05-MAR-11
139 ONLINE ONLINE 1.7142E+10 05-MAR-11
These 3 files are part of tablespace, whcih is having total 26 files
SQL> select FILE#,TS#,name from v$datafile where TS#=12;
FILE# TS# NAME
137 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_00.dbf
138 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_01.dbf
139 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_02.dbf
140 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_03.dbf
141 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_04.dbf
142 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_05.dbf
177 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_06.dbf
178 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_07.dbf
179 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_08.dbf
180 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_09.dbf
181 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_10.dbf
182 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_11.dbf
183 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_12.dbf
184 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_13.dbf
185 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_14.dbf
186 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_15.dbf
187 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_16.dbf
188 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_17.dbf
189 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_18.dbf
190 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_19.dbf
192 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_20.dbf
195 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_21.dbf
196 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_22.dbf
200 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_23.dbf
257 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_24.dbf
258 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_25.dbf
260 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_26.dbf
Pls treat it urgent.Pls treat it urgent. If it's urgent , open a priority 1 service request on My Oracle Support/metalink.
If it's not so urgent, set the datafiles to OFFLINE, so you can open the database.
Without backup you only can recover if you have ALL archivelogs since creation of the files. Normally that's rarely the case.
Werner
Maybe you are looking for
-
When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find
-
Icons not showing up in Finder
I have a strange problem: Saving files on my desktop (for example, but not limited to, saving attachments from my email application), there's no icon showing up in Finder. I can see the files if I go into an application and open the files from there,
-
I can't turn off icloud- it is always asking for my keychain password- what is that???? I just want it gone!!! It is my school computer and it is constantly popping up when I am using my display during class - I teach high school - it is maddening!
-
Overheatin​g problem
hi my hp pavilion g6 working on windows 8 32bits and its heats up alots plse can i hv any tipbits on hw to solve this problem 10x
-
Hi, the Airplay icon is not appearing on itunes.
Hi, I have speakers correctly on my wifi network, working properly via Airplay with Ipad and ipod and other PC. The PC I wish to use is on the same network, getting wifi etc but not showing the icon. It did briefly and then went away. So, I am ssure