"File could not be used because original file cannot be found." Locate File?

Everytime I try to play a song on iTunes, I get a message that says "The song cannot be played because the original file cannot be found. Would you like to locate it?" I also cannot add songs to playlists, or pretty much do anything. The only songs that will play are ones I recently purchased from the iTunes store. I also have 2 libraries setup on my computer. The original library is fine, its the second one that is a problem. Should I just go back to one library? or how can fix the problem?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Similar Messages

  • Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple.  Now I cannot access my music... It says: "File could not be used because the original file cannot be found.  Would you like to locate it?"

    Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple.  Now I cannot access my music... It says: "File could not be used because the original file cannot be found.  Would you like to locate it?"
    I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page.  It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following:  "(file name) could not be used because the original file cannot be found.  Would you like to locate it?"  I click locate but do not know where to go from there?  I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it.  I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer.  What to do???  Any help is much appreciated!!!

    See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
    If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
    tt2

  • I can not play a large percentage of my music due to "could not be used because original file could not be found"  How do I locate these files again? Thanks

    So I have not been able to play a large number of my songs duw to a message that reads "could not be used because original file could not be found".  Does anyone know how to locate these files so that itunes will play them again?  Thanks

    by following this document here:
    http://docs.info.apple.com/article.html?artnum=93313
    and then doing something else at the end.
    I followed the instructions from 1-6:
    Then rather than importing the XML file I open iTunes, selected "Add to Library" from the File menu then navigated to the itunes library on my external disc then let it do its work.
    I guess something got fragged when I changed computer but it's all ok now.
    This worked on a Mac I don't know about Windows

  • My files could not be used because the original files could not be found,how can I locate them?

    my files could not be used, because the original files could not be found, how do I locate them.  Help!!!!!

    Hello DBlake1,
    I suggest this article named iTunes: Finding lost media and downloads found here http://support.apple.com/kb/TS1408
    All the best,
    Sterling

  • The song could not be used because original file could not be found

    I just loaded iTunes on my new laptop running Windows 8. I then synced my iPod Nano hoping existing songs would be imported. Songs seemed to come across but when I try to play on my computer I get message - "The song could not be used because original file could not be found." Can anybody help?

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • I want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

    i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

    but they are on my phone and play

  • "song could not be used because original file could not be found..."

    My entire music library files cannot be found. When I click on a song I get a popup that says "song could not be used because the original file could not be found. Would you like to locate it?" I can't find the files anywhere, can't open any from my Windows Media player, from Quicktime or anywhere and can't find them on my hard drive. I have about 2300 songs downloaded from my CD collection and a handful of songs purchased on itunes. I have searched for all "mp3" files, no luck, searched by "title/artist", no luck. Yikes!!

    I've occasionally had an artist or LP go missing from my library, but to have the entire library disappear is incredible!
    Depending upon which version of itunes you are using, you should find your music here: (if it still exists)
    User (insert name here)>Music>itunes music>(Folders for each artist)
    or
    User (insert name here)>Music>itunes media (I think)>music> (Folders for each artist)
    If you find your music folder in either of these places, close the windows, open itunes, from the file menu, select "Add to Library" and navigate to the music folder and select it. Itunes should recreate your library.

  • Help with iTunes "the song could not be used because original could not be found"

    Please help!! I just recently got my pc laptop back from being worked on and the hard drive had to be replaced. Tonight I had to download iTunes and now all my purchased music (which in in the 1,000's) gives me a message when I try to play it,
    "the song could not be used because the original file could not be found." I'm really frustrated since this music was purchased why can't I play it this is ridiculous! I've had numerous problems with iTunes before but I have to say this really is the worst. I realize these songs are still on my iPhone but I have really nice built in speakers and I like to listen to music while in my office right from my pc. Any advice would be helpful, I'm at my wits end. Please advise!!

    Please help!! I just recently got my pc laptop back from being worked on and the hard drive had to be replaced. Tonight I had to download iTunes and now all my purchased music (which in in the 1,000's) gives me a message when I try to play it,
    "the song could not be used because the original file could not be found." I'm really frustrated since this music was purchased why can't I play it this is ridiculous! I've had numerous problems with iTunes before but I have to say this really is the worst. I realize these songs are still on my iPhone but I have really nice built in speakers and I like to listen to music while in my office right from my pc. Any advice would be helpful, I'm at my wits end. Please advise!!

  • Problem saying song could not be used because original file not found

    Hi,
    I updated itunes to 10.1.1 over the weekend and now my libray has massive problems. Most of my older music has an exclamation mark next to it and when I try and play it, it says "Song cannot be used because orginal file could not be found".
    I have tried to reload the content but the same problem persists, this is really annoying to say the least. What can I do.
    Thanks

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • My songs disappeared- get message "could not be used because original file could not be found?

    how can I access my songs?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I'm getting an error message saying "file could not be used because the original file cannot be found. Would you like to locate it?" What gives?

    I've updated iTunes as recommended (and when recommended) but made no other changes to my computer or files. Why are the files gone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • The song "..." could not be used because the original could not be found

    Total message states: The song "..." could not be used because original could not be found. Would you like to locate it? And then has a LOCATE button or a CANCEL button. This particular song was uploaded to my iTunes library about 3 months ago from a CD I purchased, and I show my play count in iTunes library indicating I played the song directly from the library 4 times. Now, all of a sudden, it cannot be located, and I am certain I did not move it. I tried to find it, but do not know where to go. This is the same for several other dozen songs in my library. I appreciate any feedback you may have, do not want to have to unpack all these CD's and put back on my computer. Thanks.

    The media is not where iTunes expects it to be.
    If you moved it, put it back.
    If it was moved by another program, put it back.
    Any other reason, restore the files from the backup of the computer.

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • What does this message mean: This song could not be used because the original file could not be found--When I try to play songs there is an "!" next to it.

    A friend recenlty replaced my hard drive.
    When I try to use itunes--I receive this message: "The song could not be used because the original could not be found, would you like to locate it? Next to my songs I see this: "!" Help--Please!!

    Well what happened is the pathname to the song has changed slightly.
    For instance if the song was located say c\:Windows\User\Mary\Music\iTunesFolder
    and now it's c:\Windows\User\MaryXray\Music\iTunesFolder
    I'm assuming here your music was replaced in the Music folder like on the old hard drive, that iTunesFolder was simply copied over in whole.
    So to fix things, you go into the iTunes Folder in your Music Folder and look for a iTunes Music Library .XML file and open it in a Text Program that has "find and replace" ability.
    You find the partial pathname of the old drive and you replace ALL instances of it with the new pathname.
    so \Windows\User\Mary  would be changed to
    \Windows\User\MaryXray
    Save the file and reopen iTunes.

  • Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

    Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years).  I plugged it into my pc, it was recognized and the software updated.  I created a new playlist and tied to sync the ipod.  This ipod had never been used on this pc/itunes since the pc is only 2 years old.  When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing.  I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs).  When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them.  Only my recent purchases from itunes do not.  When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found."  How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!?  I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again. 
    Any help is greatly appreciated.

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

Maybe you are looking for

  • Help please i cant figure out how to use 2 ipods on one itunes library

    ive just got a ipod mini and i already have a 20 gig ipod and i just want to put music on the mini from my itunes library already on my computer, so i looked at the info on this site and it makes no sense to me now my computer wont work for either ip

  • How do I install mountain lion without recovery partition.

    I have a Mac Mini with two 500 GB disks that I mirrored (RAID10) and lost the recovery partition in the process. The Mountain Lion installer indicates it will install anyway but without some minor features. But, when it reboots as part of the install

  • Primevera 6:Installation guide and Integration with Oracle BPM 11g

    Hi All, I working on BPM 11g. I want to integrate Primevera 6 v8.2 or higher version of Primevera with BPM 11g can any one help me out in this issue.I am unable to understand where to start from what i have to install first. I have already working en

  • "." on the number pad is causing ctrl+alt+del feature

    Hey everyone, I set up VirtualBox for someone in order to run Windows XP about a year ago. I'm not sure what changed but recently when they press the "." key on the number pad, it triggers the ctrl+alt+del feature. Thanks in advance for the help. Ste

  • How to connect mysql database to labview and plot the graph

    Hi all,  I am doing my final year project about labview. I need to connect my mysql workbench database to labview and plotting two sinwave in same graph. I can already connected my labview to mysql and showing the data in labview table.But I need to