File dates and names missing from library

I have recently had my hard drive replaced and started afresh. My old copy of iPhoto library downloaded photos into separate files by date order and showed the roll name I assigned. I could click on a little arrow on the left to show or hide the photos.
In case this is relevant - when I got my computer back it didn't have iPhoto on it (just about everything else was there, such as iTunes, etc) so I put my disc in again and downloaded iPhoto from the disc. Now all photos go into the library and automatically sort into year files, but they are not organised into separate roll dates and I cannot hide the photos any more and just show a list of roll names.
I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
Sorry I am not really very computer literate and just don't understand what is going on.... any help would be greatly appreciated.
Thanks, Linda.

Have you explored the options under the View menu?
I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
To upgrade to a later version of iPhoto requires that you purchase the relevant iLife package.
Regards
TD

Similar Messages

  • Date and time missing from menubar

    The date, time, battery, wifi, and spotlight icons have all disappeared from my menubar. I went into my preferences and found that the "show date and time in menu bar" was unchecked so I tried to check it, but it would automatically uncheck itself instantly. I tried rebooting but that didn't change anything

    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.systemuiserver.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Files missing from library after archive and install

    Hi forum folk
    any help you could give would be much appreciated.
    I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
    thanks
    jb
    powerbookG4   Mac OS X (10.3.9)   running 10.3.4 at the moment - can't verify permissions on 10.3.9

    jbeep:
    my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
    Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
    I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
    Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
    I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
    Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
    Mac OS X 10.3/10.4: System maintenance
    Macintosh OS X Routine Maintenance
    Maintaining OS X.
    I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
    Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
    Do post back with an update of your progress and any further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • How to know date and time information from Trace File defaultTrace.X.trc?

    Hi, all.
      i'm using EP 6.0 SP9 patch 1.
      As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
      By using the default trace formatter, it shows like the following sample messages.
    #1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
      My questions are
      1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
      2. how do we change the above date format to easier one
    like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
      Thanks.

    Hi Sejoon,
    I use the standalone Logviewer to read the log files. Works great.
    "If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download &#8594; SAP NetWeaver &#8594; Release ‘04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
    In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
    (source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
    Best wishes,
    Noel

  • Date and time missing in menu bar

    From time to time the date and time disappear from the menu bar.  Other times most of the items disappear from the menu bar.  What causes this?  Yes, a reboot puts them back but a reboot should not be necessary.  Any thoughts?

    Might be corrupted preferences ...
    Type or copy and paste the following:
    ~/Library/Preferences/com.apple.systemuiserver.plist
    Click Go then move the com.apple.systemuiserver.plist file to the Trash.
    Restart your Mac.
    Then monitor the time and date in the menu bar.

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • I can't drag and drop songs from library to playlists

    Unable to drag and drop songs from library into playlists, however I can drop them above or below playlists. That is no help in editing playlists! Seems to be after last iTunes up date.
    Tkank you

    My mistake totally!!! I confused a new playlist folder with a new playlist.
    Just wanted to pass that along.

  • SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string.  'Received Alerts' (OAIB)

    SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string.  'Received Alerts' (OAIB)
    SELECT    
    CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
    WHEN T0.DocStatus = 'C' THEN 'CLOSED'  END  AS 'Document Status',
    T0.DocDate AS 'Posting Date',
    T0.DocNum AS 'Doc.No',
    T0.NumAtCard,
    T0.TransId AS 'Trans. No.',
    T0.Comments AS 'Remarks',
    T0.CardCode AS 'Offset Acct',
    T0.CardName AS 'Offset Acct Name',
    sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
    T3.DueDate AS 'Cheque Date',
    T3.CheckSum AS 'Amount'
    FROM         ODPO AS T0 LEFT OUTER JOIN
                          VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
         OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                          VPM1 AS T3 ON T2.DocEntry = T3.DocNum
    where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

    Hi,
    Try this:
    SELECT   
    CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
    WHEN T0.DocStatus = 'C' THEN 'CLOSED'  END  AS 'Document Status',
    T0.DocDate AS 'Posting Date',
    T0.DocNum AS 'Doc.No',
    T0.NumAtCard,
    T0.TransId AS 'Trans. No.',
    T0.Comments AS 'Remarks',
    T0.CardCode AS 'Offset Acct',
    T0.CardName AS 'Offset Acct Name',
    sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
    T3.DueDate AS 'Cheque Date',
    T3.CheckSum AS 'Amount'
    FROM         ODPO  T0 LEFT OUTER JOIN
                          VPM2  T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
    LEFT OUTER JOIN
         OVPM  T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                          VPM1  T3 ON T2.DocEntry = T3.DocNum
    where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
    group by T0.DocStatus,T0.DocDate ,
    T0.DocNum ,
    T0.NumAtCard,
    T0.TransId ,
    T0.Comments ,
    T0.CardCode,
    T0.CardName ,
    T0.WTSum ,
    T3.DueDate ,
    T3.CheckSum
    Thanks & Regards,
    Nagarajan

  • New document about sequence presets and codecs missing from Premiere Pro

    If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue.
    This document relates to the following problems:
    - missing sequence presets when creating a new sequence
    - Encore error: "Encore will not launch in non-royalty bearing mode. The application needs to be serialized with a royalty bearing serial number."
    - When opening a project in Premiere Pro: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    - When importing footage, the footage is missing audio or video.
    These failures are all because Premiere Pro and Encore use some codecs that require activation before they can be used. If activation of these codecs has failed, these codecs will not be available to use.

    Well done.

  • Attempted to download a movie and movie disappears from library.

    Attempted to download a movie, looks complete, but unable to sync to iPod... restart iTunes and movie disappears from library.  No files in media folder and iTunes store thinks that it has been downloaded already.  Worked with iTunes account people who were very responsive, but after multiple resends on their side, the problem continues and they suggest a local problem on my side.  Thoughts?

    Hey Jerry... I ended up submitting a formal feedback issue and someone got back to me fairly quickly.  Responses are typically from an offshore team I assume, since they happen at night.  The email address that I have been corresponding with is [email protected] .  I'll keep this string posted if I make any progress... Good luck!

  • Project Server 2010 - Modification date and name of the person who made the last change in the project

    Hello everybody
    I'm with a doubt.
    I got in the business
    environment Project Server 2010 and
    would like to get the publication date,modification
    date and name
    of the person who made
    the last change in
    the project. It is possible
    to doby the native
    resources or is
    there any query in
    SQL Server to perform a
    query of this information.
    Thank you.
    Obrigado por contactar o fórum Microsoft Technet!

    Hi Hezequias,
    You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
    get the data based on the projectUID. 
    The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
    For the "last modified by", I think it is not stored in any place.
    But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
    date and username automatically into a custom enterprise field.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • File Path and Name field does not display correct path

    We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field  inside our report and it displays the correct path when viewed inside Crystal reports:
    C:\Program Files\reports\Chart.rpt
    When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
    C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
    How can this be corrected?
    Thanks in advance for any assistance.

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • How do I get date and time component from a DATE object?

    Hi All,
    I need to get date and time separately from a DATE object, does
    anyone know what function I should call? GetDate()? GetTime()?
    I need this in a SELECT statement.
    Thanks in advance and looking forward to your early reply.
    Regards.
    Gladywin
    30/11/2001

    Hello,
    See following SQL.
    select to_char(sysdate,'dd/mm/rrrr') today_date,
    to_char(sysdate,'hh24:mi') now_time
    from dual
    Adi

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Conversion failed when converting date and/or time from character string

    Hi experts,
    I'm trying running a query in Microsoft Query but it gives the following error message:
    "conversion failed when converting date and/or time from character string"
    when asks me the data I'm inserting 31-01-2014
    i've copy the query form the forum:
    SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
         CASE  WHEN T0.TransType=13 THEN 'Invoice'
              WHEN T0.TransType=14 THEN 'Credit Note'
              WHEN T0.TransType=30 THEN 'Journal'
              WHEN T0.TransType=24 THEN 'Receipt'
              END AS 'Document Type',
         T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
    FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
    WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
    ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

    Hi,
    The above error appears due to date format is differnt from SAP query generator and SQL server.
    So you need convert all date in above query to SQL server required format.
    Try to convert..let me know if not possible.
    Thanks & Regards,
    Nagarajan

Maybe you are looking for