File deletion does not increase space available in CC

I did an experiment this morning to see what was going on with my space utilization being incorrect.
1) I added about 5GB of files and folders to my local CC Files folder
2) Sync worked properly, my utilized space went from about 5GB to about 10GB
3) I deleted 5GB of files and folders from my local CC Files folder
4) Sync worked properly, and all 5GB of files and folders were archived in CC
5) From the website interface, I deleted all 5GB of files and folders from the archive
6) My archive showed as empty via the web interface
7) My files and folders on the CC web interface matched the contents of my local CC Files Folder
8) My CC space utilized, according to the web interface, only dropped from 10GB to 9.2GB, but the actual utilization should be a little over 4.9GB.
I suspect this is happening to everyone and will get worse with time. Adobe - please address.

The steps you describe don't replicate the effect here, I've tried it several times on three workstations. At step 4 the usage remains allocated (as it should, given the files are in the archive folder) but as soon as the archive is permanently deleted, usage in both the web portal and CCDA falls to 0%. Within seconds.
If it's not reducing in your case, then the files aren't being deleted. They may not show up, but that's a different problem to the idea that deleting a file doesn't reset the usage.

Similar Messages

When i delete files memory does not increase

When I delete files from the memory the size of available memory does not increase. Why?

Try restarting the computer, then select the disk's Desktop icon. Press COMMAND-I to open the Get Info window and check how much free space is shown. If it still hasn't changed at all then try the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Although the suggestion to delete old Time Machine snapshots, if any, that will only free up space but will not fix the problem you have described. If you are deleting files but the free space on the drive fails to update, that means there is a directory problem on the drive that needs to be fixed.

Time Capsule does not indicae space available/used

I recently purchased a new computer and restored information from my Time Capsule, which worked perfectly previously.
My problem is...when I open Time Machine Preferences...it will show the Name of Time Capsule, Oldest Backup time, Latest Backup time, and Next Backup time...what it does not show is Available Space...by that category it looks like this...Available:-- . If I start the backup it will show up and when backup is completed it drops off...
Please advise...

"Available ---" is what I see as well. In normal conditions the Time Capsule disk is only mounted when a backup is occurring or when you're running Time Machine. At other times the disk is offline to your computer. It Time Machine tried to give you storage statistics at that point, in the general case it couldn't guarantee that the numbers were accurate.
If you always want Time Machine statistics, then always mount your Time Machine disk.

Nas drive does not recalculating space after deleting files on Nas Drive??

Greetings to Respected expert,
Actually we have configure Window server 20082 Storage server.We have NAS drive configured which have 300GB quota limit. The actual data in the folder is 185 GB but it shows only 15 GB free and shows a warning .Please assist me why NAS server does not re-calculate
the space after deleting files or does not leave space. Pardon me if I am not able to clear you my problems.this is very urgent for me.
Thanks And Regards
Rajnish Singh

Hi Rajnish,
As you mentioned "quota limit", it is set via FSRM or specific function on NAS?
Meanwhile could you confirm the number 185GB is accurate? Sometimes a part of used space is just not calculated. You can confirm with checking the total space on NAS locally.
If the number is correct and quota is set via FSRM, check if it is the Disk Quota which not re-calculated the released space. Try to clear the Quota setting and reconfig with 300GB limitation and see if issue still exists.
If you have any feedback on our support, please send to [email protected]

I delete files but my available disk space does not increase

I delete files but my available disk space does not increase. What to do?

Try reindexing the hard drive:
http://support.apple.com/kb/ht2409

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

HT1526 When I delete a file it does not appear in my trash folder 10.6.8, please help.

Please help as when I delete a file it does not appear in my trash can, however it deletes.

You might have to rebuild your hiden trash file...
Solving Trash Problems...
http://thexlab.com/faqs/trash.html
Empty and recreate an account's Trash
The following procedure will "kill two birds with one stone." It will both:
Empty the Trash of an affected account.
Create a new ~/.Trash directory, with correct ownership and permissions, for that account....
More at that link.

HT203176 When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17'

When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''

http://www.thexlab.com/faqs/trash.html for starters.

CPU heats up on file copy/backup and fan speed does not increase

Hi Friends,
I have been having issues with fan in my Dell Studio 1555. It has an ATI Radeon card and I had installed the proprietary catalyst driver as the open source driver is too noisy.
Recently, I noticed that on accessing my hard disk and copy files or running backup (luckybackup), the temperature shoots up from around 60 deg C (just using chrome) to 100 deg C when it would shut down itself. However, it seems like the fan speed does not increase with the increase in temperature to help it cool down.
I tried to get the fan speed details with "lm-sensors" but it would not show the fan speed. Here is the output of sensors:
[user@domain]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +60.0°C (crit = +100.0°C)
temp2: +59.0°C (crit = +100.0°C)
temp3: +66.0°C (crit = +100.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +58.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +58.0°C (high = +105.0°C, crit = +105.0°C)
Following the Arch wiki, I added acpi_enforce_resources=lax to kernel parameters but it did not help as well.
Here is the main problem:
1. CPU temperature shoots on accessing hard drive but fan speed does not increase - Any guide/direction to investigate would be really helpful.
2. Sensors does not show the fan speed. Read about i8kutils, but couldn't figure out how to get it working with systemd. Any indicators here?
Last edited by ravisghosh (2013-07-01 05:22:01)

luuuciano wrote:Ravi, did you solved it?
Im having similar issue on a vostro 1710, fan never works... :-/
The fan was bad. I had to replace the fan. However, I have not been able to figure out how to see fan speed in sensors.
Last edited by ravisghosh (2013-09-08 15:57:37)

I have a MacBook Air using Maverick. I have files in the trash I want to recover. I do not have "Put Back" and Command Delete does not work.

I have a MacBook Air using Maverick. I have files in the trash I want to recover to their original files. I do not have "Back Up" and "Command + Delete" does not work.

Drag them out of the Trash and put them in their original location. Put Back may work on one file at a time.

Can't Open Final Cut - "Waveform Cache Files Folder does not have read/....

I am new to Final Cut and macs, so please bear with me.
I have created an animation in Final Cut pro (5) using stills. The project takes up a lot of space, which is why I have moved the 'Final Cut Documents' file onto my external hard drive. However, I relocated/reconnected the project files when I next opened the project and all was peachy.
Last night when I had the project open I got errors about not being able to save the project. This was my first problem, but is now insignificant compared to this new problem this morning:
I cannot open Final Cut. I have an error saying 'The Waveform Cache Files Folder does not have read/write access. Please select a new folder in the System Settings Dialog or correct the problem on disk'. Final Cut then proceeds to shut down, so I cannot change any user settings within the program.
I have made all Final Cut folders read/write as well as my external hard drive and anything else with Final Cut on it. It still presents this warning.
A final confession: last night in (I think?) User Preferences I changed some of the settings to my external hard drive (I'm not even sure what settings...I just checked boxes next to the Hard Drive and unchecked a box next to the laptop drive), hoping it would just save the project to it, rather than on my laptop. This may have contributed to this new problem...maybe not.
PLEASE HELP...this animation is due Monday.

Thanks for your reply - it sounds like it will work, but I can't delete one of (yes, I made multiple copies, but have been able to delete the others) the Waveform Cache Folders as it comes up with the error "The operation cannot be completed because one or more required items cannot be found. (Error code -43)." Is this the cause of my problems? How do I fix it?

When I download an app I had to put in payment settings cause it was expiring,after that it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 .pls tell what to do

When I download an app I had to put in payment settings cause it was expiring,after that i paid and it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 . I tried rebooting and powering off but still it didnt work even when I clicked the app( which still hasn't downloaded yet). What do I do now?

The GB size of the download file is the compressed size (like .zip or .dmg). When the file is installed/uncompressed it can be 2-3 times larger.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Object in import-file header does not correspond to the migration object

Hi Forum,
I have loaded Business partner successfully with the file created in Workbench with test data.
Now I want to load the data from Application server. But i am getting the error
"Object in import-file header does not correspond to the migration object".
I have read that the import file should have 3 types of record
1. Header record corrs to the structure TEMINFO
2. Actual data records
3. Final record for individual object.
I am not sure where I am making a mistake
my files header looks like
<004F><Space><&INFO><Company><Migration Object><User><Date><Time>
Please help.
Thanks in advance

I am assuming you are in transaction EMIGIMP loading a converted migration file for import, correct?
If so, you should be able to read the company, mig. object, user name, etc. in the import file tab overview. If conversion did not work correctly, this info will not display here.
It is possible you are missing some data in the header, or spacing is not correct. Are you converting the input file with program REMIG_FILE_TRANSFORM or are you trying to create the migration file yourself?

ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

Hi ALl,
On compliing my book get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780957408654.itmsp
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt. Exception message: null]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
Any advice??? Hope someone can help!

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

File deletion does not increase space available in CC

Similar Messages

Maybe you are looking for