File Dialog limited to 227 files (error 43)

Upon selection of the 228th file, the string indicator at the bottom of a file dialog gets blank and upon clicking "ok", the Dialog returns an empty array and error "43". The files are small ascii files with rather long filenames "PS010146981_Datataking_2nd_day.hdr" and sit in a folder that contains 14730 files.
Reducing the number of files does not influence the problem.
Changing the filepath does not influence the problem.

LabVIEW version?
OS version?
The file dialog is typically supplied by the OS, so LabVIEW probably can't do much about it. Exactly which file dialog are you using?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

File Error - Unknown file when trying to import from HDD camera

I recently purchased a Panasonic SDR-H80 and am trying to get my widescreen footage into FCP. I converted the .MOD files to .m4v files in Handbrake, and they play and look fine in the Finder. However, when I try to move them into FCP, I get a dialog that says "File Error - Unknown file." I'm not sure what I'm doing wrong here. Can anybody help?

I converted the .MOD files to .m4v files in Handbrake .... I'm not sure what I'm doing wrong here
What you're doing wrong is using Handbrake and trying to use .m4v files in FCP. Neither is the correct process in preparing for editing.
Try using MPEG Streamclip and a format that actually works natively in FCP. .m4v is a final delivery format- not for editing. A search on this forum would have revealed that to you in a matter of seconds: http://discussions.apple.com/search.jspa?objID=c206&search=Go&q=handbrake
-DH

File Error: Unknown File, Cannot Save

I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
-Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
-This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
-HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
-ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
-SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
-All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
-AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
-Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
--*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
Thanks for any help you can offer.
G5 Dual 2 GHz PowerPC Mac OS X (10.4.5) 1.5 GB ram

Do people search this forum at all?!?
Check your project for CMYK files.
Search this forum for General Error.
This was discussed about 90 minutes ago.

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Illustrator CC 2014 "Exception in file" error with linked images

It appears some images are showing "Exception in file" error dialog boxes.
If I resave the image in Photoshop or link it to a different image the error disappears.
Happened with:
- old design files linked to old images
- image that was dragged from Mac Mail
- linked to JPG provided from other users
Does not happen with:
- images created recently with Photoshop CC or CC 2014
Here is the error:
Has anyone else seen this and/or found a solution?
This is an error on a new Mac Pro with brand new install of all software. No older versions of cc installed. Just CC 2014.

That's a good idea. Unfortunately, same problem if I move the image to desktop or same folder as file.
If I resave the file (JPG in this case) the error disappears.
I understand this can be the solution, but given this issue had not happened before, it's interesting it is happening with CC 2014.
Attached is the image in question. Note that this is not the only image. It has happened with older design files that were made from older versions of cc or before cc.
I'm not sure if the uploader will recreate the JPG so I'll compress the file and is available here if anyone would like to test.
Dropbox - photo 2.JPG.zip

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Word 2008 A file error has occurred. Check your network connections . . .

Word 2008 12.1.2 throws an error dialog when trying to save a docx file:
"A file error has occurred. Check your network connections or make sure the disc is properly inserted and not defective (nameoffile.docx)"
Newsgroups recommend to trash the Normal.dotm and let Word re-create that template but that doesn't solve the problem.
Newgroups also recommend specifying the file location of User Templates. That's doesn't help either.
A new file, however, does not appear to be a problem after following these suggestions. So there may be something wrong with my file.
I suspect it has something to do with the gutter and mirror margins because when these features are manipulated, Word 2008 inserts an extra "section next page" that I am not happy with, and the page numbering and sometimes section numbering gets thrown off.
Actually, I don't care WHY it's happening. I just want to know HOW to avoid this error. I cannot save changes to an important docx file anymore.
My work around: "Save as" to doc format and continue working!
However, I would prefer to keep working in docx format because Word bloats doc files incessantly, but docx seems to keep file size in check.

that was only a temporary fix. It didn't work well for long. Back to problems with both doc and docx versions of the same file.
Are there any other general swathes I can make, e.g. repair permissions (been there, done that)? I have trashed Normal.dotm, the 2008 preference files and repaired permissions.
docx files throw the error dialog, doc files crash Word on a regular basis.
Any more ideas?

Intermittent too many open files error and Invalid TLV error

Post Author: jam2008
CA Forum: General
I'm writing this up in the hopes of saving someone else a couple of days of hair-pulling...
Environment: Crystal Reports XI Enterprise / also runtime via Accpac ERP 5.4
Invalid TLV error in Accpac
"too many open files" error in event.log file
Situation:
Invalid TLV error occurs seemingly randomly on report created in CR Professional 11. Several days of troubleshooting finally lead to the following diagnosis:
This error occurs in a report that contains MORE THAN 1 bitmap image.
The error only shows up after 20 or more reports have been generated sequentially, WITHOUT CLOSING the application that is calling the report. In our case the Invoice Report dialog within Accpac. This same error occurred in a custom 3rd party VB.NET app that also called the report through an Accpac API.

after getting this message you need to do 2 things:
1. delete the current workspace because it contains some bad data in one the config files - failure to delete the workspace will result the error message to appear even if trying to upload a single file.
2. add to DTR files in groups - no more than 500 in a single add.

Compiler File Error

I am unable to burn DVDs in DVDSP2. I get the same message each time: Compiler File Error. I have tried compressing as MPEG2, I have tried moving media to boot drive and I have tried re-loading Compressor and DVDSP and upgrading before opening. I have tried everything suggested here to solve this issue but have been unsuccessful so far. Any thoughts?

I used the "DVD: Best Quality 90 minutes" presets in Compressor (Dobly Digital Pro 2.0 and MPEG-2 2.6Mbps 2-pass). By "gaps in the timeline" do you mean the FCP timeline? If so, no, there is only one movie.
The project does not build at all. I click BURN, the INITIATE dialog box appears and closes immediately. The log then shows COMPILER FILE ERROR.

What causes 'Unexpected end-of-file' error?

Hi,
I am a photographer and an avid Lightroom user. I have two camera's (Nikon D700 and D300) and two computers, a desktop PC and a MacbookPro. Lightroom is installed on both computers.
For the last three photoshoots I have had this problem where 1 in 3 to 1 in 5 images in Lightroom on my desktop PC suddenly gives a 'Unexpected end-of-file' error. First I thought it was my camera. But then I loaded the images onto my MacbookPro and they worked fine. Then I took some images with my other camera, loaded them on to my Desktop PC, and, voila, same problem.
The problem specified: the image stops rendering a preview. A dull preview appears. At the top of the screen the message appears: "An unexpected end-of-file occurred." The histogram window stays empty and the image can not be developed.
I have browsed through this forum some looking for the cause and the fix. There are some mentions of it, but they all date back to 2007.
I run LR 2.2 on Windows XP SP2 and on a MacbookPro with OS X, version 10.5.8.
Please help me understand the cause of this problem, and help me find a fix?
Thanks,
Rogier
Rotterdam, The Netherlands
www.rogierbos.com

While the corruption in your .NEF file could come from any one of a number of sources, here is a way to recover at least some of the information if you own Adobe Acrobat. Your .NEF file should contain a smaller JPEG file created by your Nikon camera when the picture was taken. Even if the .NEF file is corrupt, the JPEG may well be intact, and you can tell that's the case if a preview is visible in Lightroom or Bridge.
If you try to print it from Bridge or Lightroom, though, you will get an error. You can get around this by loading up a CODEC that will let you preview the files in Windows Photo Gallery. Nikon has one available for download to use with Vista x32 at http://www.nikonimglib.com/nefcodec/index.html.en, but it doesn't support Vista x64, so if you're running that (as I am) you'll need a second party CODEC such as the one available from http://www.ardfry.com/Products.htm with a 15-day trial download available. They also have a DNG CODEC which I have not tried.
With that CODEC installed and your system rebooted, preview the damaged NEF file in Windows Photo Gallery. Choose the "Print" option and select the "Adobe PDF" printer. Choose the "Postscript Custom Paper Size" option, and set the dpi resolution to the highest available (4000).
Go to the "Options" link on the bottom right of the window and uncheck the "Sharpen For Printing" box, as you can do this yourself with later processing. Then go to the "Printer Properties" link to see the Adobe PDF settings.
Go to the Adobe PDF Settings tab and choose Default Settings: High Quality Print, which will set the resolution to 2400 dpi.
You want to have Acrobat interfere as little as possible with the output, so select "Edit" from the Default Settings tab, which will bring up the "High Quality Print - Adobe PDF Settings" dialog. Here, turn off the "Optimize for fast web view" check box, then go to the "Images" folder and set the "Downsample" setting to Off and the pixels per inch to 2400. Also, set "Compression" to Off.
If you're going to do this in the future, you can also "Save As ..." your settings for future use with a name like "Fix Bad NEF Files."
Print the file to a designated folder. It won't be quite as good as the NEF file would have been, but at least you haven't lost the shot.

File too large error or corrupt file error

I have scanned some images using a Nikon Cool Scan and when trying to import the the NEF files into Lightroom I get a corrupt or unrecognized file error. Bring it into CS2 or CS3 and save as TIFF and try the import and get a File too large error.
Any ideas or help on this. What is the file size max for import?
The scan is 4000dpi even tried at 300dpi.
Thanks in advance for any insight.

> Is it truly a size problem? If so, what is recommended? Lee Jay states that 10000 pixels is the max on either side. Okay, in DPI, what does that translate to?
 
 There's no necessary relationship between pixels and dots. You could scan an image at 4,000,000 dpi and translate it into an image of 100 x 100 pixels. I've used ridiculous extremes to make a point. The LR limitation is currently 10,000 pixels for any side. So you could have 9,000 x9,000 pixels but not 10,001 x50 pixels.
 
 Is this now clearer?
 
 
John "McPhotoman"
 color="#800000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
 Canon DSLRs

IPOD freezes while SYNCING - and then gets file error

Hello all,
i have a standard 40gb click wheel ipod, quite old, it works, but limited. The ipod just freezes while syncing now, it has been restored numerous times, but 2 not much avail, i can get one or two albums on there, then everytime i try and sync the ipod just freezes, and has to be reset. Every TIme i plug the ipod into my vista laptop it says, the says. SCAN AND FIX, ( because i couldnt get anything else to work i tried this ) and this is what vista told me
http://img155.imageshack.us/img155/9118/vistafixesipodlu5.png
i was like woah, so i proceded to restore the ipod then it seemed to work, for a day. then went back to the freezing while syncing, then next time i plugged in the ipod, windows said the disk needs to be formated before it could be used, so i tried that ( cos itunes was doing sweet **** ALL ) and windows couldnt format it, and neither cos HP USB FORMAT Tool. so i reset the ipod, plug it back into vista, and behold, SCAN AND FIX COMES UP, so i click it, it fixes it, but only loads 1 album before it freezes while syncing again, i have the screenshots,it took 11 screenshots, to get the FULL MESSAGE, that vista chkdsk gave me, there was thousands of these "BAD LINKS IN LOST CHAIN at CLUSTER XXXXX Corrected" messages
im currently listening to Three Days Grace on the ipod, works GREAT, except if i try and put more then this ONE album on it, it freezes while syncing, and gives me the unknown file error. SO any ideas if this ipod can be fixed, cos itunes cant do anything, im assuming there is physical unrepairable damage to the HDD of the ipod and will need replacing if this ipod wants to be in full working order again.
The ipod is NOT under warranty either, so does any1 know where in Australia, it be fitted with a new HDD? Thanks
kind Regards,
Hayden
Message was edited by: FittyyeN

your an idiot stardock, format doesnt work, fails to format -
stardockofthedead ( aussie css joke lol )

Could not open file error on Copy Express

Hi Experts,
Im using Copy Express to copy Item Master from origin db to target db.
Right now, I am only copying 1 item (I have tried several and a variety, but still the same) and I hit a "Could not open file" error, it has some chinese characters. And I cant make out what is the meaning or why the error is appearing.
Before this error, I also see a "XML ERROR" on the status that dissappear very quickly upon showing. Then next is this error message.
[Click here to view screenshot|http://www.flickr.com/photos/45736280@N07/5077898618/sizes/l/in/photostream/]
Please help and Thanks!
Warmest Regards,
Chinho

Hi,
The item is able to copy using copy express but you must make sure that there is no exclamation sign before run it.
The maximum item can be copied is limited in the copy express. it is just only 2,000 items.
I suggest to use data transfer workbench.
JimM

Thumbnails appear but missing file error message if try to open

PSE worked fine for 2 months, when downloading to Shutterfly organizer crashed. uninstalled and reinstalled-problem persisted. Set up new user/administrator and organizer would open but with "missing file error message" if tried to open thumbnail picture. Then unistalled pse8 and reinstalled pse6. Still get missing file error, but again I can see the thumbnails. I had at one point 5000 photo's and deleted 3000 to reduce clutter using the delete from harddrive option when I did so. Now I once again have 5000 photo's cataloged ?? At this point I would be happy to simply get pse6 working as it should, any suggestions please. I have a lot of time and knowledge invested in PSE and I hate to cop out to Picassa at this point ?

I'm slowly getting this mess untangled. It seems that on the reinstalls of pse8 following organizer crash that even photo's that were previously deleted from both catalogs AND harddrive must still keep a thumbnail version hidden in some file somewhere. when I used the delete option in the missing file dialog I was able to remove them from the current catalog. It seems as though after too many software upgrades and photo's copied and saved through the years, you might as well by a new computer and mke a fresh start. But then again I'd just have to deal with windows7 and pse8 compatibility issues anyway. D@&D if I do, D@&D if I don't scenario !!

How do i fix or avoid a corrupted file error message

i get an corrupted file error message when i try to send a video from photoshop elements 5.0 to adobe premiere elements 3.0. video plays in photoshop but wont transfer, by photoshop, disc or file. cants get anything into premiere elements. help?
lyndaloon

Lynda,
Are you attempting to send a video file which you have on your hard drive to Premiere Elements3? Or is it a slideshow which you have just made in the PSE slide show create function which you are attemptin to send ?
If it is a video file on your hard drive, then I suggest that you first try to bring the video directly in to Premiere Elements 3. If you have already attempted adding a video file directly to Prem Elem 3, then I recommend that you post your question in the separate forum for Premiere Elements. I suggest that you include info about the file type and codec of the video file as well as what variation of Windows you are running.
Premiere Elements forum at
http://forums.adobe.com/community/premiere_elements
FYI
- I have previously sent photo files from Photoshop Elements 5 to Premiere Elements 3: however I have never attempted to do a Send of a video file. There are many types of video files for which the PSE 5 Organizer has very limited support and that is why I think that you would be better using Premiere Elementa 3 to work with video.
Or perhaps you might have a newer format of video file that Premiere Elements 3 does not support for editing. For example, AVCHD format is not supporedt in PE 3 but is supported in newer versions. This question about types of video is better asked in the Premiere Elements forum.

File Dialog limited to 227 files (error 43)

Similar Messages

Maybe you are looking for