File Does Not Have Proper Content

Hello,
I'm working on rebuilding a project file after some knucklehead at work deleted many of the files in the project (don't worry, the person is still alive).
After re-transcoding and re-synching all the files (interviews, to be precise), most of them have been able to be re-linked fine, even when the attributes of the clip have changed slightly.  One of them, however, is being grumpy
When I try to reconnect it to the file, it says:
"The file does not have the proper content to reconnect to 'clip name' at timecode x in sequence y."
Is there any way to work around this?  I don't understand why all the other clips, some of which changed much more between their original versions and the new ones I've made, were able to be relinked when this one refuses.
Any thoughts?
Cheers,
BWP

You may have to simply reimport and cut the material into the sequence.
This may be faster than trying to finesse a reconnect.
x

Similar Messages

  • Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

    Hi,
    While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
    action.  Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

    Hi Nikunj Shah,
    First, I suggest you download
    Microsoft Safety Scanner or
    Malicious Software Removal Tool to run a full scan.
    The error messages here seems to be caused by the corrupted registries, which related with the folder association.
    You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
    How to back up and restore the registry in Windows
    Copy and paste the following commands into Notepad, and save it to a .reg file:
    =================
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Folder]
    "ContentViewModeLayoutPatternForBrowse"="delta"
    "ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
    "ContentViewModeLayoutPatternForSearch"="alpha"
    "ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
    @="Folder"
    "EditFlags"=hex:d2,03,00,00
    "FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
    "NoRecentDocs"=""
    "ThumbnailCutoff"=dword:00000000
    "TileInfo"="prop:System.Title;System.ItemTypeText"
    [HKEY_CLASSES_ROOT\Folder\DefaultIcon]
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
      65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\explore]
    "MultiSelectModel"="Document"
    "ProgrammaticAccessOnly"=""
    "LaunchExplorerFlags"=dword:00000018
    [HKEY_CLASSES_ROOT\Folder\shell\explore\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\open]
    "MultiSelectModel"="Document"
    [HKEY_CLASSES_ROOT\Folder\shell\open\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
      65,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
    "MUIVerb"="@shell32.dll,-8518"
    "MultiSelectModel"="Document"
    "Extended"=""
    "LaunchExplorerFlags"=dword:00000003
    "ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
    "MUIVerb"="@shell32.dll,-8517"
    "MultiSelectModel"="Document"
    "OnlyInBrowserWindow"=""
    "LaunchExplorerFlags"=dword:00000001
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
    @="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
    @="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
    @=""
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
    @="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
    [-HKEY_CLASSES_ROOT\Folder\ShellNew]
    [HKEY_CLASSES_ROOT\Folder\ShellNew]
    "Directory"=""
    "IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
      74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
      00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
      00,00
    "ItemName"="@shell32.dll,-30396"
    "MenuText"="@shell32.dll,-30317"
    "NonLFNFileSpec"="@shell32.dll,-30319"
    [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
    "AllDrives"=""
    "IsFolder"=""
    "NoExtension"=""
    ==================
    Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
    Import option from the File menu, to merge the REG file contents.
    Let me know if you need any further help.
    Best regards
    Michael Shao
    TechNet Community Support

  • Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

    Folks,
    Hello.
    I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
    Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
    Step 1: start Oracle Database Server and LISTENR is listening.
    Step 2: start Application Server ./psadmin and 8 processes are started.
    Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
    In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
    The application server is down at this time.
    CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
    We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
    Mac OS X 10.6(Snow Leopard)
    Mac OS X 10.5(Leopard)
    iPad
    Oracle Linux Enterprise
    Mac OS X 10.4(Tiger)
    Windows 8
    Windows 7
    Mac OS X 10.7(Lion)
    Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    I View APPSRV_1023.LOG (current server log file) and its content is below:
    PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
    PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
    PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
    PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
    PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
    PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
    ~                                                                                                                                                        
    I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
    My question is:
    How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
    Thanks.             

    Dear Nicolas,
    Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
    It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
    I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

  • Getting Error: Config file does not have IDStore WLS Administrator Username

    I am configuring OIM/OAM in HA mode following the EDG:
    - Enterprise Deployment Guide for Oracle Identity Management
    - 11g Release 1 (11.1.1.5)
    I am at step
    - 10.4.5 Creating Users and Groups for Oracle WebLogic Server
    I am executing this command:
    - idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
    Where wls.props has these values:
    IDSTORE_HOST: admin.mycompany.com
    IDSTORE_PORT: 389
    IDSTORE_BINDDN: cn=orcladmin
    IDSTORE_USERNAMEATTRIBUTE: cn
    IDSTORE_LOGINATTRIBUTE: uid
    IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
    IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
    IDSTORE_SEARCHBASE: dc=lispa,dc=local
    POLICYSTORE_SHARES_IDSTORE: true
    and I am getting this error:
    Config file does not have IDStore WLS Administrator Username
    Any idea why ?

    I have added to the property files:
    IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
    But its not solving the issue.
    Here is the log:
    Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
    WARNING: Logger initialized in warning mode
    Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
    SEVERE: Config file does not have IDStore WLS Administrator Username
    Please advise on how to resolve this issue

  • I am trying to use Facetime and it says my devise does not have proper credentials??

    I am trying to use Facetime and it says my devise does not have proper credentials.  What does this mean?  I have used it in the past. 

    While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

  • Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

    EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
    THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

    STOP SHOUTING!  Or at the very least, get the CAPS lock key fixed.
    Remove iTunes.
    Download and install the current version of iTunes from http://www.apple.com/itunes/download

  • Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel.  Help

    am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

    Hi,
    Here is a similar thread for your reference:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
    http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Keeps telling me my file does not have a program associated with it and go to folder options in the control pane. Where is it located

    When I try to save a file the download window keeps coming up. When I click to open the erro message says "File does not have a program associated with it for performing this function. Create an association in the folder options control panel." Where is this control panel and what kind of association do I make. Usually it was adobe but I don't have that choice

    Try using this link first https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file?esab=a&s=File+does+not+have+a+program+associated+with+it+for+performing+this+function&r=0&as=s
    Also it could be the type of file you are downloading. Like if it was a type of text that your default word processor did not accept it would give you that message.
    Hope this helps,
    Jeremy Eramian

  • This file does not have a program associated with it...

    Ok, I'm not awesome at technological troubleshooting, so if someone could help me, I would be grateful because I'm getting frustrated.
    I'm trying to play a silly little game online and it's telling me I need Shockwave.  I know I have it because I've played this game before (something time-wasting on addictinggames.com) and I found a file called Shockwave 11 in C:\\WINDOWS\system32\Adobe\Shockwave 11 with all sorts of things in it.
    I checked my Add/Remove Programs list and it says I have Adobe Shockwave 11.5 and that it is used rarely.
    Since there seems to be a glitch here that I don't understand, I went to the Download Shockwave page on this site and tried to download the latest version or whatever, if that would work.  The gray progress bar moves across under the "Adobe Shockwave Player is now installing" line and then I get an error popup that says:
    "This file does not have a program associated with it for performing this action.  Create an association in the Folder Options control panel."
    What am I supposed to do?  What does this mean?  What file?  Huh??
    I am running Internet Explorer 7 and have Windows XP.
    I am a total noob and need to be spoken to like a child.  Can anyone please help me? 

    I clicked on your link (thank you - where did you get that?) and installed the Full version, apparently successfully, though during the download there were a couple of components that were troublesome. 
    The error message I got during setup read: "Error opening file for writing: C:\WINDOWS\system32\Adobe\Director\SWDNLD.EXE   Click Abort to stop the installation, Retry to try again, or Ignore the skip this file."  Retry did not work, despite having clicked it 10s of times.  I clicked Ignore, then got the same message again, but about a different file: C:\WINDOWS\system32\Adobe\Director\SwDir.dll   Clicking Retry again did not help move things along, so I ignored this one too.  What does this problem indicate?  Do I need to do something here?
    Those are the only errors encountered during setup.  I declined the Google toolbar.  The dialog box says Successfully Completed; I clicked Close.
    So I go to try to play this game as a test and it says "Installing Shockwave Components" and then I get the same error popup telling me that this file does not have a program associated with it for performing this action and that I need to create an association in the Folder Options control panel!
    What does this mean and how do I do it, since it appears to be critical to getting this thing to work...?

  • 'This file does not have a program associated with it for perfoming this action'?

    'This file does not have a program associated with it for perfoming this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel". Any help? This error message has never come up before. I have tried to open the page on 3 different devices but the same error message. All help is greatly appreciated as I need to print the page out for my course I am doing. Thanks all.

    You get this when doing what?  Can you post a link to the page that gives you this message?

  • Powershell shortcut gives"this file does not have a program associated with it for performing this action"

    Hi,
    We have a server where powershell gives an error. The shortcut or the context menu for start button (replaced cmd in context menu) gives an error saying "this file does not have a program associated with it for performing this action".
    In some events, like going to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools\Windows PowerShell.lnk and opening it results in bupkus. Nothing happens.
    Browsing to C:\Windows\system32\WindowsPowerShell\v1.0\ and running powershell.exe directly or opening cmd.exe and typing powershell <enter> runs powershell as it should.
    What gives?
    This posting is provided "AS IS" with no warranties or guarantees and confers no rights

    Hi,
    I'd probably try asking here:
    https://social.technet.microsoft.com/Forums/en-us/home?forum=winserver8gen&filter=alltypes&sort=lastpostdesc
    This is more of an OS issue than a PowerShell issue, IMHO.
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • This file does not have a program associated with it for performing this ac

    Hi all,
    After creating an application for a WebDynpro project, when I execute the project (Deploy New Archive and Run) the application I am receiving then following error message.
    "This file does not have a program associated with it for performing this action. Create an association in folder options in control panel."
    Pls can anyone provide the solution.
    Regards
    Ravi

    Maybe the problem its on the Run part. It is supposed to open a navigator and go to the URL of the application you just deployed.
    Try deploying on one step and then Running on other.
    If it is the Run then open the navigator and test your App.

  • This file does not have a program associated with it for performing this action

    hi
    whenever i install adobe reader in my system it change my all program to adobe reader nd can't open any application.. i mean internet explorer change in adobe reader, C++, microsoft office every application...why its happened....
    and even i can't open pdf files on my system it shows a erroe the file does not have a program associated with it to perform this action.. please create a association in control panel

    This's the message showing!!

  • TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    You are posting in the "icloud on my mac" forum, but your profile mentions Windows.  If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream.  If using windows, try posting in the iCloud on a PC forum.  You'll get better help there.
    https://discussions.apple.com/community/icloud/icloud_on_my_pc

Maybe you are looking for