File does not have the correct plug inn while I made it in that programme

Ever since I joined the creative cloud and I make a file in indesign, it is possible that the next time , I will not be able to open that file again because the plug ins can not be found or because the file was not stored properly. But then the next day, I might open that file again without problems....
Any ideas how that is possible?
Thanks

The only way it could happen is if it's not the same version of InDesign.
For example, if you made the file in Adobe Indesign CC - and then attempted to open that in InDesign CS6 or earlier version then you would get a plugin error.
If you create a file in CS6 and open that in Adobe InDesign CC - it will open fine. If you save it from InDesign CC you will no longer be able to open it in CS6 or earlier.
If you need to open the files in CS6 - then export from inDesign CC as an IDML file, which will open in CS6 or earlier (up to CS4).
Can you clarify you work flow? Do you have multiple versions of InDesign on your computer?

Similar Messages

Can't open Illustrator file - "does not have the correct number of operands..."

Right off the bat - Mac, 10.6.8, Illustrator CS4. I've seen different variations of this "...correct number of operands..." error on these boards, with fonts and other things as the culprit, but I haven't come across this specific issue yet. If someone has seen something along these lines please let me know.
I work for a small design agency that uses Illustrator CS4 on a consistent basis. We have had an ongoing issue where random files that had been working fine will sporadically become corrupt, causing us to have to use the Document Recovery Mode and then edit the file in a text editor to fix the problem which does work for this issue flawlessly, other than the headache of having to do this repeatedly.
Our workflow is such that we use a local area storage RAID which everyone uses to access the same client files. These client files are all in a series of nested folders we employ to keep all our separate client's work separate. The error arises when certain images are placed into a document, then the document is saved and closed. Upon trying to reopen the file we get an error message like this:
Where the string "/CR0050_ret.psd" is the filename of the offending image. Basically what has happened is that in the actual code for the document, there is a string that starts as "%%IncludeFile....." which specifies the file's pathway on the local area storage we use. The last segment of that string is the image's filename, which has gotten returned to the next line down, and now the program cannot interpret that line in the code, so it cannot properly open the file. The file will open but only the content that is above the offending IncludeFile string is visible.
(client information blurred out)
This does not happen to all the "%%IncludeFile" strings in the document, and does not happen for all images on our local area storage. We know how to fix the problem through the Document Recovery mode and then editing the text. Once we return the filename portion of the code back up to the proper line, and save the file in the text editor, the file will open in Illustrator and show all the information contained within properly. However, if you save the file out again without making any changes, the same errors will propagate throughout the file's code again, and become unreadable prompting another document recovery. Insert endless cycle here.
What we would like to try and find out is why is this happening, so we can prevent it from happening in the future. Is the image nested too far down in the hierarchy of folders? Are there too many characters in the file pathway string? What can we do to keep this from happening moving forward?
I know that an easy answer is to copy the files over locally to our hard drives, and work from there, but this is not a very efficient way to work, as we are all collectively working on different files, utilizing common image resources. We like to keep one set of images so there is no duplication that may lead to the wrong image being sent out - "Oh you sent John's version? You should have sent Molly's version of the image for that file"
We also downloaded the trial version of Illustrator CS6 to see if an upgrade would work wonders, but it does not, the problem persists when saving a recovered file in CS6.
Any thoughts? Thanks in advance.
ABK

In Illustrator it is generally not a good idea to read and write directly to and from a server: http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
If you really think you need to do it, then check your network thoroughly.

The illustration does not have the correct number of operands...

I work on a Macbook Pro 10.8.5. When I open a file in AI CC and place any number of images, save and close the file. When I reopen the file I get this message. 'Can't open the illustration. The illustration does not have the correct number of operands for an operator... etc.' The file scan still open after this but all the placed images disappear.
I've tested placing different formats ie. JPGs, TIFs, PNGs, flattened PSDs etc. They all come up with the same error.
I've searched in Google and I haven't found a solution yet. There was a suggestion to import the AI file in INDD, this doesn't help beause all copy converts to outlines and embeds the images.
Can anyone help?

Hi, just tried this and AI says 'Could not open the file'. Here's a couple of screen grabs to show you my file setup and the exact error message.

Transport certificate does not have the correct issuer or is expired

Hi all,
I hope this is not a duplicate question.
We are assisting a partner company set up the Flash Access ecosystem. They have asked us to help packaged some content for them using certificates issued to them. I've been trying to package content that works fine when using our certificates but I keep getting this error : Transport certificate does not have the correct issuer or is expire when I try to package with their certificates.
The certificate has not expired. That was the first thing I checked.
Has anyone run into this error? I am using the reference implementation for packaging if that helps.
Thanks.
Pedro.

Hi Katherine,
Thanks for responding.
Indeed I do have the adobe-flashaccess-certs.jar in my path. I was able to package with a certificate issued to our own company. Our Certificates were Trial Certificates. The ones I am having problems with are test PKI certificates that our partner sent to us so that we can help them out.
Please let me know if you need any more info. I am definitely down with helping someone trying to help me!
Thanks.
Pedro.

Facetime not working "the device to register does not have the correct access data"

I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
There might be other problems. Have you tried checking with Apple?

Avi file does not have the same resolution as image file?

I'm using LabView with an IEEE-1394 camera and I set up the camera to record at a resolution of 1280 x 960 and can snap images and save them at that resolution from Measurement and Automation Explorer, but when I record avis using LabView, they have a resolution of 720 x 480 even though the images being written to the avi are 1280 x 960. I have had this same problem trying to make new videos from the original in which I extract a part of the image and write it to a new avi file... even though the extracted image is something like 620 x 300, when I play the avi (or get avi info), it says the avi has resolution of 720 x 480. I've tried creating an IMAQ, then using the set image size sub-VI to set the image to the size I want and the image shows up with the right resolution but the resulting avi has the wrong resolution, so my sub-videos are distorted. Is there some way to set the resolution of the avi other than by writing an image of that resolution? I'm using the compression filter DV Video Encoder... would that make any difference?
Thanks!
Kelly

Hey Kelly,
As far as the different codecs that are available, it all depends on what type of filter you want to use. They vary so widely that it is hard to say that one is better than another. Also, it depends on what type of compression that you want to use will also determine which codec you will want. Some use lossy compression and some use lossless compression. With lossy, you will lose some data when it compresses, but lossless will not. Lossless on the other hand will produce large data files, as it can only compress a certain amount without losing data.
One thing that you might want to consider is using some of the Vision functions to track changes in pixel values from one image to the next. There are a lot of different processing that you can do on your images before you store them to file by using the NI Vision functions. Other than that, you might have to just play around with the different codecs to find which one will work best for you.
Let me know if you have any further questions or concerns. Thanks, and have a great day.
Regards,
DJ L.

My email does not have the correct email when i send to someone. It has my mothers. How can i fix this?

When I send an email to someone or reply to them it sends it under my mother's name. How can i fix this?

It may be that you have more than one outgoing mail account, and you're sending from the wrong one. From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

File Does Not Have Proper Content

Hello,
I'm working on rebuilding a project file after some knucklehead at work deleted many of the files in the project (don't worry, the person is still alive).
After re-transcoding and re-synching all the files (interviews, to be precise), most of them have been able to be re-linked fine, even when the attributes of the clip have changed slightly. One of them, however, is being grumpy
When I try to reconnect it to the file, it says:
"The file does not have the proper content to reconnect to 'clip name' at timecode x in sequence y."
Is there any way to work around this? I don't understand why all the other clips, some of which changed much more between their original versions and the new ones I've made, were able to be relinked when this one refuses.
Any thoughts?
Cheers,
BWP

You may have to simply reimport and cut the material into the sequence.
This may be faster than trying to finesse a reconnect.
x

I do not have the correct version of the flash player, but when I follow the steps to download it, it still doesn't work in Firefox. (It does work in Internet Explorer)

Every time I click on a video icon, the response I get is that I cannot play the clip because I do not have the correct flashplayer. However, when I click to download it, nothing changes. I even tried disabling my security setting but it still did not work. Unfortunately, the troubleshooting help was too complicated for me to figure out. Is there something basic I can do to make firefox work? It does work on Internet explorer, so obviously the correct program is in my computer - it just won't work on firefox.

IE uses a different version of Flash than other browsers use.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del = Processes tab}
3. Then run the Flash setup file from your Desktop.

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

File does not have the correct plug inn while I made it in that programme

Similar Messages

Maybe you are looking for