"File error: data may have been lost" in Exporting to Excel with CR 8.5
I just started getting this error and I have applied the CR SP3. What else can I do, I need to resolve this ASAP. Thanks!
Try updating u2fxls.dll
Similar Messages
-
Error: Data may have been lost
Hi All,
I have a typically issue with the crystal reports 8.5.
Below is details :
I have application which is built using ms access and crystal reports 8.5
When i run the application and download the reports in the form of excel, i get a error saying that data may have been lost when i open the excel file. This happens only when i open the excel file in excel 2003 service pack 3, when contacted microsoft they said that this is a issue with the crystal report and not with the excel.
So does any one have a idea how this issue can me resolved.
Thanks in advance.How many records (rows) and columns are you exporting to Excel?
Excel does have limits on both.....AND if you check the supported platforms document for CR8.5 you will notice that Excel 2003 is not supported. May be time to move up to a newer version of CR. -
"There has been a network or file permission error. The network connection may have been lost
Hi,
While trying to save an Excel or (less frequently) Word document, employees at my company have been seeing the error, "There has been a network or
file permission error. The network connection may have been lost." This is more common when they are connected through the VPN, but it also occurs locally.
The employees all have Win 7 Pro laptops and the file server is Win Server 2008 R2. I have found suggestions that a Windows update is the cause, but the articles on that all limit it to Server 2003. Others have suggested setting the program to
save a local copy of remote files; however, while the setting exists in Word, it does not exist in Excel.
If anybody has any advice, it would be greatly appreciated.
Thank youThis is a known issue, might try the workaround is a better chooses .
http://support.microsoft.com/kb/291156
KR -
Cannot add item to keychain with the above error
Is there a solution?
An error has occured. Unable to add an item to the current keychain.
Could not write to the file. It may have been opened with insufficient access privilegesIs there any more background information that you care to add to help enlighten us?
-
HT5824 Is there a way to restore contacts that may have been lost?
I lost my contacts on my iphone. I backed up my mother's contacts to icloud and my contacts synced into her phone. I deleted my contacts from her phone. Now her contacts are on my phone and my contacts are GONE!! I am so upset!!! Many VIP contacts lost!! Is there a way to go back in icloud to restore information? I am so frustrated right now!!
Welcome to the Apple Community.
To restore from a back up made through iTunes, follow these instructions.
To restore from a back up made through iCloud, try the following:
The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs.
Ensure the device is connected to your local network.
Start the restore from iCloud back up.
Allow the devices settings to restore (watch for the confirmation of completion).
As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
Wait for the time out confirmation.
Navigate to settings > iCloud and turn off contact syncing (keep contacts when prompted).
Reconnect the router to the internet and let the restore process complete.
Delete any iCloud contacts from iCloud.com on a computer.
Navigate to settings > iCloud and turn on contact syncing (merge contacts when prompted).
May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now. -
I woke up this morning to find that all my Smart Mailboxes had fone. The generic TODAY was still there. I had severel hundred of them built up over the past few years of client emails.
All other Folders are still there ... just the Magic ones vanished.... Any thoughts!?I am having this same issue, and it surfaced when I restarted my Mac. Mail starts up with the "Mail Upgrade" dialog ("Welcome to Mail, To use the new features in Mail...") which goes away quickly after clicking the continue button.
I am running Mavericks 10.9.2 on an Late 2012 iMac. -
Entered data in form is lost upon export to excel? Help.
Dear forum members,
I have a need to deliver a user fillable form to customers on a thumb drive. I created the form from an existing excel spreadsheet. The customers need to enter (numerical) orders for products and return the drive to me. I can get the data entered by the customer to save in the pdf form,but when I export back to excel the entered data from the pdf form is missing. Any help or suggestions would be appreciated.Ah, ok, this is for regular PDF files, not for form contents (which are entirely separate). Use TOOLS > Forms > More Form Options > Manage form data. Various export formats are available.
-
When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
m_fields = NewArrayList()
Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
Next i
'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
stream = File.OpenWrite("D:\MyTestReport2.rdlc")
Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
' Causes child elements to be indented
writer.Formatting = Formatting.Indented
' Report element
writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
writer.WriteStartElement("Report")
writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
writer.WriteStartElement("ReportSections")
writer.WriteStartElement("ReportSection")
writer.WriteElementString("Width", "11in")
writer.WriteStartElement("Body")
writer.WriteElementString("Height", "5in")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Tablix")
writer.WriteAttributeString("Name", Nothing, "Tablix1")
writer.WriteElementString("Top", ".5in")
writer.WriteElementString("Left", ".5in")
writer.WriteElementString("Height", ".5in")
writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
writer.WriteStartElement("TablixBody")
' Tablix Columns
writer.WriteStartElement("TablixColumns")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixColumn")
writer.WriteElementString("Width", "1.5in")
writer.WriteEndElement() ' TableColumnNext fieldName
writer.WriteEndElement() ' TablixColumns' Header Row
writer.WriteStartElement("TablixRows")
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", fieldName)
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows") Since Rows tag in header is not closed not need to open fresh tag
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
'writer.WriteElementString("Value", fieldName)
writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow
writer.WriteEndElement() ' TablixRows'End of Details Rows
writer.WriteEndElement() ' TablixBody
writer.WriteStartElement("TablixRowHierarchy")
writer.WriteStartElement("TablixMembers")
writer.WriteStartElement("TablixMember")
' Group
writer.WriteElementString("KeepWithGroup", "After")
writer.WriteEndElement() ' TablixMember' Detail Group
writer.WriteStartElement("TablixMember")
writer.WriteStartElement("Group")
writer.WriteAttributeString("Name", Nothing, "Details")
writer.WriteEndElement() ' Group
writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixRowHierarchy
writer.WriteStartElement("TablixColumnHierarchy")
writer.WriteStartElement("TablixMembers")
'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
writer.WriteStartElement("TablixMember")
writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixColumnHierarchy
writer.WriteElementString("DataSetName", "tbdataset")
writer.WriteEndElement() ' Tablix
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' Body
writer.WriteStartElement("Page")
' Page Header Element
writer.WriteStartElement("PageHeader")
writer.WriteElementString("Height", "1.40cm")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Textbox1")
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", Nothing, "ABC CHS.")
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TextBox
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' PageHeader
writer.WriteEndElement() ' Page
writer.WriteEndElement() ' ReportSection
writer.WriteEndElement() ' ReportSections' DataSources
writer.WriteStartElement("DataSources")
writer.WriteStartElement("DataSource")
writer.WriteAttributeString("Name", Nothing, "tbdata")
writer.WriteStartElement("DataSourceReference")
writer.WriteEndElement() ' DataSourceReference
writer.WriteEndElement() ' DataSource
writer.WriteEndElement() ' DataSources'DataSet
writer.WriteStartElement("DataSets")
writer.WriteStartElement("DataSet")
writer.WriteAttributeString("Name", Nothing, "tbdataset")
writer.WriteStartElement("Query")
writer.WriteElementString("DataSourceName", Nothing, "tbdata")
'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
writer.WriteElementString("CommandText", Nothing, "TableDirect")
writer.WriteEndElement() ' Query'Fields
writer.WriteStartElement("Fields")
ForEach fieldName In m_fields
writer.WriteStartElement("Field")
writer.WriteAttributeString("Name", Nothing, fieldName)
writer.WriteElementString("DataField", fieldName)
writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
writer.WriteEndElement() ' FieldNext
writer.WriteEndElement() ' Fields' rd datasetinfo
writer.WriteEndElement() ' DataSet
writer.WriteEndElement() ' DataSets
writer.WriteEndElement() ' Report' Flush the writer and close the stream
writer.Flush()
stream.Close()
'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
Dim ms AsNewMemoryStream(myByteArray)
'Supply Stream to ReportViewer
ReportViewer1.LocalReport.LoadReportDefinition(ms)
ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races -
Hi There!
I have created one package (1) to import data from Flatfile(csv), (2)Clean It then (3)send clean rows to SQL Database.
This package was working fine before. Since I have decided to deploy this package to automate this process, I have no clue what went wrong but this doesn't run anymore. Flatfile and Database are on same windows box. We are running SQL 2008.I
have attached some screenshot to make this conversation more concise.
Your time and efforts will be appreciated!
Thanks,
DAPHi Niraj!
I recreated connection and I was able to remove that RED DOT next to those connections.
Still package doesnt run well :(
I have only one server. I use same server through out the process. I ran that process as job through SSMS and attached is output file(if this explains more)...
Microsoft (R) SQL Server Execute Package Utility
Version 10.0.4000.0 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:34:38 AM
Error: 2014-07-18 11:34:39.33
Code: 0xC0208452
Source: Data Flow Task ADO NET Destination [86]
Description: ADO NET Destination has failed to acquire the connection {2430******}. The connection may have been corrupted.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline
Description: component "ADO NET Destination" (86) failed validation and returned error code 0xC0208452.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0024107
Source: Data Flow Task
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 11:34:38 AM
Finished: 11:34:39 AM
Elapsed: 0.531 seconds
Thanks for your time and efforts!
DAP -
can some one help me? I have been trying to update my MAC and it will not download because this message come up
(The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.)For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.
-
In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
3. Wait a minute or so for the report to finish.
4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit. -
I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise. Everything seems to be working fine for the site, but there is one issue. The problem I am running into
is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
"Documents in this folder are not available. The folder may have been moved or deleted, or network problems may be preventing a connection to the server. There is a problem with the web server. Please try again later or contact the
server administrator."
If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries. This seems to affect all of the sub sites on my site. Explorer view works if that information is required and I do not get
error messages using Explorer view.
Thanks in advanced for any help on this.
-ThaoHi pei jingw,
You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
Best,
Sara -
I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were created in and get them to be useable in InDesign 6, but I'd need an email address that was registered to our software to give the help desk person. After finding the correct email address, different adobe help number people told me to come here to ask as there is no phone support. Can anyone get me to an adobe technician that can provide a price quote for finding out what created these files and for getting them converted? Thanks.
Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though. -
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
Maybe you are looking for
-
Where is the Photomerge option in Elements 12? I would like to create a panorama for several photos. How can I do this in Photoshop Elements 12?
-
I've currently subject to the growing pains of using tape to hard drive. My camera is a Sony HDR-CX350V and shoots in AVCHD format. Sure it means good quality video but its a real nightmare when it comes to editing. I currently edit on Premiere CS5 b
-
List of Codes In Material Master
Dear Sir, How can we know the list of all codes created in material master according to there category like MRM ERM etc... If any one know good way pls answer soon Thanks & Regard Ajay Pareek
-
Macbook pro retina with ghost image problem
Can i claim my retina display that have ghost image problem?
-
Hello - does anyone know if I can use additional colors for flags in my mail? The only flag I see is the option to use the orange one. When I used to use Outlook I had 6 colors to flag with and liked using different color coded flags for different em