File Error using Check In

This is the error I receive when I try to Check in my
stylesheet to the remote server: "File activity incomplete. 1
file(s) or folder(s) were not completed." In the details, it says,
"stylesheet.css - error occurred - An error occurred - cannot put
stylesheet - Access denied." I know that I have access to the
server because I can check any other files on my site in and out. I
also know that all other users can't check in the stylesheet either
though we can all check it out, edit, and save (just not save to
the server). Is the file corrupted? Has anyone seen this error with
their files? Do I have to re-do my css?

Similar Messages

End of file error using modified version Cont Pattern Input.

Hi. I am using the Cont Pattern Input example, which is modified to write the Data Read to a file on the hard drive. A wire is connected from the Data Read to a "Write to I16 subVI" which is also modified to be a "Write to U8 subVI". It writes problem free to the file specified until the 2.1 GB when it displays a Error 4 "End of File Error". There is ample space on the hard drive. How do we get rid of this error as we would eventually need to write up to 60 GB of data?

Unfortunately, the only thing to do is get a different operating system. I seem to recall that Windows has a fixed limit on file size of about 2G.
Is there any way you can logically break the data you're collecting into smaller logical units? Alternately, you could structure your code to write to one file till it fills and automatically switch to a second, and a third and so on. As long as the routine that you write for working with these huge datasets keeps track of the various pieces of data it could all work as though it were all in one very very very large file.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

File to file error using BPM

Hi...
I am doing File to File scenario using BPM. I am getting the below error. Could you please help me out in this.
Runtime error
Unable to read payload from the message object

Check the mapping indepently i.e go to Interface Mapping and give the input xml from the SXMB_MONI and test it.
Probably problem with some tranformations ,format.
if problem persists
There seems to be an issue with the XML files.
Correct them and try to open the XML file in IE.
During the testing of the mapping, please set the trace level to all and test the mapping once again.
reward points if found helpfull
regards
chandra.k

Deploy par file error using NWDS

Hi
I developed a portal service for activity report. After i deploy the service i get an Java Iview Runtime error in portal and our portal is down. I found the error which is a null reference in portal service i wrote.I fixed the problem, but i can't deploy par file using neither NWDS. Is there any other ways to deploy the par file. Please help.
Thanks
Edited by: Ozkan Onay on Jan 31, 2008 8:11 PM
Edited by: Ozkan Onay on Jan 31, 2008 8:16 PM

Hi,
To deploy the application, you can without NWDS but not without server running. Server should be up for deploying any application. Go to Drive:\usr\sap\J2E\JCXX\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
and ..\deployment\temp folders. Delete your project. It will be cleaned from the portal. Now restart the server. It will be up.
Regards,
Harini S

Time machine file errors using Time capsule

OK
I have been using a time capsule to backup my Intel Imac (2.8Ghz 1TB HD) for about 8 months. when it works it works but twice now I have had failures that have resulted in me having to start from scratch.
Things I have tired have been
rebooting
Removing the latest files from the time capsule folder and retrying
removing the com.apple.timemchine.plist file from preferences
Of course all fail and my last backup (started 6-27-08) is not toast. What makes me mad is I can still access the data fine using TM but it will not continue to update. I created a folder on my TC to place the old sparse bundle in and am now currently 8gb into 1 100gb backup.
How can I avoid having to do this every 3-6 months. Is this normal or is there something unique to my system?
thanks

this happens because you must have removed the mounted virtual volume with your filevaulted home directory from TM exclusion list. when you are logged in go to TM system preferences->options. normally, you should see your filevauled home directory on the exlcusion list. that means that the mounted virtual volume with your home directory is excluded from backups. if you remove it from the exclusion list then TM will back it up unencrypted as a separate hard drive. so if it's not on the list do the following. delete the file /library/preferences/com.apple.timemachine.plist. then go to TM system preferences and set it up again. check that the mounted home folder is on the exclusion list. then it won't be backed up anymore in the unencrypted form and the only thing that will be backed up is the encrypted sparse bundle itself.

Amount Conversion File error using VALUE keyword in BPC 7.5M

Hi Experts,
We just migrate from BPC 7.0M to BPC 7.5M. We also change the server to multi-server arquitecture 64-bit (Application server and BD Server).
When we try to Import or Validate Transformation File with Amount conversion file using VALUE keyword, the system returns: "Error: Validate with data file failed". The content of conversion file columns:
EXTERNAL= *
INTERNAL= *
FORMULA = VALUE*0.001
At first, we thogut that was a problem with 0.001 but we tried diferent formulas with the same error:
FORMULA = VALUE*1
FORMULA = VALUE*2
FORMULA = 0.001*VALUE
We also tried to use VALUE keyword with case sensitive and the result was the same. And when we don't use VALUE keyword the validation is OK.
Any idea? Thanks in advance.
Best regards,
Albert

Hi everybody,
First of all, thanks for your replies.
The trasformation file is:
FORMAT = DELIMITED
HEADER = NO
DELIMITER = ;
AMOUNTDECIMALPOINT = ,
SKIP = 5
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ACCOUNTP=*COL(4)
BRANDS=*COL(6)
CATEGORY=*NEWCOL(ACTUAL_YTD)
CUSTOMERP=*COL(7)
DATASRC=*COL(4)
ENTITY=*COL(2)
GROUPS=*NEWCOL(LC)
INTCO=*NEWCOL(INONE)
MARKETP=*COL(8)
TIME=*COL(3)
AMOUNT=*COL(9)
*CONVERSION
TIME=TIME.xls
ENTITY=ENTITY.xls
DATASRC=DATASRC.xls
MARKETP=MARKETP.xls
BRANDS=BRANDS.xls
CUSTOMERP=CUSTOMERP.xls
ACCOUNTP=ACCOUNTP.xls
AMOUNT=AMOUNT_TEST.XLS
The data file has the first column empty and the 5 firsts row are skipped.
21.12.2011 Salida din?ica de lista 1;;;;;;;;
;Company;0FISCPER;0ACCOUNT;ZIMP_TYPE;...FIT_CTR;N? cliente;ZRAMO_P; Importe
;ES0;2020012;PCAJ;D;AX028;E4291;ZAS2;26,04000000
;ES0;2020012;PCAJ;D;AX028;E5145;ZNEA;2,48000000
;ES0;2020012;PCAJ;D;AX028;E5361;ZNE1;1,86000000
;ES0;2020012;PCAJ;D;AX028;E0889;ZMI2;1,24000000
;ES0;2020012;PCAJ;D;AX028;E0824;ZLAN;12,40000000
;ES0;2020012;PCAJ;D;AX028;E0801;ZMI2;25,42000000
;ES0;2020012;PCAJ;D;AX028;E1273;ZTS1;3,10000000
;ES0;2020012;PCAJ;D;AX028;E6163;ZLAN;60,14000000
;ES0;2020012;PCAJ;D;AX028;ORGUS00;ZSHL;96,10000000
The conversion file AMOUNT_TEST.XLS has only one line. With this conversion we want to change value from u20AC to Ku20AC.
You should think that we used these transformation and conversion files in BPC 7.0M and it works fine.
I'd like to remember that if we don't use AMOUNT_TEST.XLS or delete VALUE keyword, these transformation file works fine too.
nilanjan, I tried to validate data file with one record and the system show me the same error.
Roberto, our first migration was from BPC 7.0M to BPC 7.5M SP3, but we didn't test it. Then we apply SP7 because to solve other issues, and when we try to validate data load we detect that issue.
Thank you for your help, I hope we can solve that problem soon.
Best regards,
Albert

"Unable to Check Out File Error" Message

I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
Thank you!

I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

File in use error - copying from a faulty external hard drive

Hi,
I have a 750GB Western Digital external hard drive, which contains two partitions - (1) HDBACKUP - a Time Machine backup of my laptop drive, and (2) MEDIA - pictures including an Aperture library, and videos.
When I plug the drive in, only the MEDIA partition mounts. And I get an error saying Disk Utility cannot repair the drive and to backup the files as soon as I can, and reformat the drive.
When I try to copy the files onto another drive using Finder, it copies part of the file and then gives me a "File in use" error and stops. I tried copying via Terminal and its the same - this time I get a "Resource busy" error.
There are no other apps accessing the files. And this happens for every file on the drive.
So how do I go about copying the files off the drive?
I tried using DiskWarrior but it was stuck on Step 1 - Searching for Volume Information, after 3 hours.
I really need to get the Aperture Library off the drive. Any ideas on how I can copy it across?
Thanks

This did not work. I still get an error trying to repair with Disk Utility.
It gets to
Starting repair tool:
Checking file system
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
The volume MEDIA could not be verified completely.
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So DiskUtility tells me to backup as many files as possible. However, when I try copying these files, I get a "File in use" error.

E26 253 Error while checking in and storing: \\sapserver\file.tif

Hi Experts,
I have now been fighting with this problem for a couple of weeks, and not been able to solve the issue.
My problem is to upload/check-in documents from the application serve in background.
I have a program to create DIF and attach files using BAPI_DOCUMENT_CREATE2.
When I'm running the program in foreground there is no problem.
When I run it in background I get the error message E26 254 Error while checking in and storing:
sapserver\file.tif
I have checked that the background process can see the document on the server and that is OK, so the problem must be within the actual storing of the document in DMS in the BAPI.
Any input to how I can solve this issue is appreciated.
Thanks in advance,
Thomas

Hi All,
We have now done some testing.
We got it to work on one of our systems but not on the other
I ran report RSCMST on both systems with the same backend directory. (A directory on the application server of the one that fails).
Running this report I get this result on the system that does not work.
HTTP interface test using function group SCMS_HTTP
21.06.2010 14:39:01
serverInfo:
contRep                   ZEBAN
contRepDescription        PR Attachments
serverStatus              running
serverVendor              Copyright SAP AG, All rights reserved 1998, 2001
serverVersion             6300
serverBuild               193
serverTime                123902
serverDate                21.06.2010
serverStatusDescription
pVersion                  0046
contRepStatus             data(89%) log(1%)
contRepStatusDescription
                                                  ok           58.848
create(1): new doc (frontend)                     ok          445.211
create(2): new doc (back end)
check_subrc: subrc     2 instead          0
check_subrc: HTTP error: 400 Bad Request
create(2): new doc (back end)                    error
docGet/create(1): copy document                   ok          105.684
info(1): existing doc                             ok           26.881
update(1): new comp                               ok           47.050
info(2): after update                             ok           30.458
delete(1): unknown doc                            ok           33.061
delete(2): unknown comp                           ok           31.669
delete(3): existing doc                           ok           53.330
delete(4): deleted doc                            ok           34.781
delete(5): existing doc                           ok           31.088
putCert:                                          ok           35.785
         1 errors
Any ideas to what could be wrong?
Thanks in advance.

Can't add .ACSM files to ADE, message: "Error! Check activation"

I am using Adobe Digital Editions 4.0.3 with a NOOK Simple Touch, running on a 64-bit 2009 Windows 7 machine. Recently I have been unable to download my library ebooks to my Nook. The electronic library I am using (a derivative of Overdrive, I think) only allows the download of books in the .acsm format. However, recently, I am unable to open the books in ADE. Instead, the only option I have is Adobe Reader. When I select the 'Browse' option and choose ADE and hit 'OK', nothing happens and it doesn't show up as an option. When I try and manually add a file to my ADE library, I get an error message saying 'Error! Check Activation". The only thing I even got halfway working was when I downloaded ADE 1.7.2. I got the .acsm files into the library (still, I had to add them all manually through the ADE interface). However, my NOOK will not open these files, even when using ADE 1.7.2. These are the things I have tried:
-Downloading an e-book (in .acsm format) from the Digital Editions free book selections. Same issue
-downloading and redownloading Adobe Digital Editions 4.0.3 (and removing the other program)
-Downloading and redownloading Adobe Digital Editions 1.7.2 (and removing the other program)
-Deauthorizing ADE (Every time it just says "Unable to erase authorization. Please try again after some time.")
-Adding a book in ADE 1.7.2, getting ADE 4.0.3, transferring the book to the newer software, deleting 1.7.2, and syncing my nook with 4.0.3. Nook says it's not authorized
-Doing a factory reset of my NOOK
-Unblocking the .acsm files by going to Properties>General
-TRYING (and failing) to automatically associate .acsm files with Adobe Digital Editions. Like trying to open a downloaded file with ADE, I get no response when I browse and select i
(SIDE NOTE: my Adobe IDs all match. I know that is also not the issue).
I think the issue here is that something is preventing .acsm files from opening in ADE, and nothing in particular is wrong with my NOOK. My only guess (which is probably misguided) is that Windows can't process my request for ADE to be the program to open .acsm files because it's in the x86 program files folder and not the default Program files folder. I've never heard of that being a problem but I can't think of another reason.
If anyone has any ideas, please give them to me. I am actually typing all this for my grandmother, and she is going crazy without her library books.

On the deactivation issue- I just had a similar issue where I could not deactivate and had to manually deactivate by deleting the activation information from Windows registry. That might help you as well.
Follow the instructions below the disclaimer on this page: Error "E_AUTH_NOT_READY" | Digital Editions
Or if you are more computer savvy, simply close Adobe Digital Editions and then delete this registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept

Error in Rcvr File Adapter using FTP ?

Hi @,
I am getting the follwoing error while trying to put file in the folder thru Rcvr File Adapter using FTP and it is giving me following error :
java.io.FileNotFoundException :(Permission Denied )
I have verified the permissions on the folder and it is having write permissions.
Please suggest Its urgent.
REgards

hi amit,
can you
1. check whether the access to FTP is Authenticated, if so provide the username and password
2. try giving different file name at the receiver end
3. try normal ftp commands to access the folder
regards
Ramesh P

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

Please see:
http://www.bidn.com/blogs/DevinKnight/ssis/76/does-file-exist-check-in-ssis
http://social.msdn.microsoft.com/Forums/en-US/01ce7e4b-5a33-454b-8056-d48341da5eb2/vb-script-to-write-variables-to-text-file

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

Checking file exist using file exist operator

Hi all,
My environment is owb 9i. DB is oracle 9.2.0.8
My business requirement is,
If file exists in the landing directory the next instant my mapping should start execution other wise it should wait untill the file arrives there.
How could i achive this functionality???
For this i am utilizing the file exist operator in process flow.
When the file exists in the specified directory i am able to execute the process flow quite fine but when the file doesnt exist in the specified directory the file exist operator is in wait state and even after when the file is placed into the directory, still the process flow remains in the wait state.
please suggest me a way.
thanks in advance.
ram.

Hi Ram,
The problem you are hitting here is that there is no wait activity and no loop activity (yet) in the process flow editor. So it is hard to model this logically.
Would it be a good idea to write shell script that does similar things? You could check for a file, pauze and check again. Then error out or succeed...
In the 10gR2 release of OWB you can completely model this using waits and loops.
Thanks,
Jean-Pierre

Adding Used DC under CRMWEB gives error " .dcdef checked out by others"

Hello E-Commerce Experts,
We need to extend E-Commerce 7.0 b2b application (claims and returns). After much struggle, we could finally deploy the custom application. We now would like to extend it and have new fields added.
We need to to defined a used dependency in the web module project crm/eservice/web/cr_b2b for customer extension DC provided for java action classes (crm/home/crm/ext) but are getting an error saying:
DC definition could not be checked out: the file .dcdef is checked out by others. None of the objects have been checked out by any other developers.
Please advise as to how to resolve this error.
Additionally, we would like to add CRMJAVA SC as a development component, so we could refer the existing java files. But we are not able to import it properly. It shows up as an empty SC in NWDS after being imported.
Your help would be highly appreciated.
Thanks!

I was able to resolve my error. I had created some other instances of the same project under a different workspace.
Follow these steps for every workspace you might have created your project in (except the current workspace):
For every open activity ( Windows -> Show View -> Open Activities)
- Select your open activity -> Right Click -> Revert and then Delete the activity (Right click -> delete)
Delete all your open activities.
Open your current project and Resync all DCs.
Now try to add used DC for the web module project.
It should work.

File Error using Check In

Similar Messages

Maybe you are looking for