File error with Calibrated Software import

I am using Calibrated Software to import EX .mov files from Apple OS drives into a Dell M6600 laptop. It worked just fine the first two times in demo mode but then started giving me an error that said "Unsupported format or damaged file". PP is seeing the drive and its contents just fine through the browser tab. Have I missed something? I purchased and installed the licenses and it says they are fine. I am not having any trouble with these same files going into my MacBook Pro and using them in Final Cut Pro.
I also, can't import any file such as JPEG stills from this drive.

Try simply transferring the content from the Apple drive to an NTFS formatted drive before import.

Similar Messages

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
http://www.adobe.com/products/photoshop.html

Illustrator CC 2014 "Exception in file" error with linked images

It appears some images are showing "Exception in file" error dialog boxes.
If I resave the image in Photoshop or link it to a different image the error disappears.
Happened with:
- old design files linked to old images
- image that was dragged from Mac Mail
- linked to JPG provided from other users
Does not happen with:
- images created recently with Photoshop CC or CC 2014
Here is the error:
Has anyone else seen this and/or found a solution?
This is an error on a new Mac Pro with brand new install of all software. No older versions of cc installed. Just CC 2014.

That's a good idea. Unfortunately, same problem if I move the image to desktop or same folder as file.
If I resave the file (JPG in this case) the error disappears.
I understand this can be the solution, but given this issue had not happened before, it's interesting it is happening with CC 2014.
Attached is the image in question. Note that this is not the only image. It has happened with older design files that were made from older versions of cc or before cc.
I'm not sure if the uploader will recreate the JPG so I'll compress the file and is available here if anyone would like to test.
Dropbox - photo 2.JPG.zip

'Unknown File' error with H.264 clips from Kodak zi6

Hi everyone
I'm trying to import some clips taken with a Kodak zi6 into Final Cut Pro, and I'm getting an 'Unknown File' error. The clips are H.264 quicktimes, 720p60 (well, actually 59.94fps). They open & playback in Quicktime Pro without any problems whatsoever, so I can't figure out why FCP doesn't like them. I've just now tried transcoding one to a ProRes422 as well and FCP rejects that as well. Does it have something to do with framerate?
As an aside, I'm not terribly thrilled with the ProRes transcode either, there's a HUGE difference in colourspace for the worse. The H.264 actually looks better and more accurate.
Any thoughts welcome!

I experienced the exact same problem. However iMovie 08, which has radically reduced functionality imports the files fine. Something that I noticed that might be an issue is that in Quicktime Pro if you "Show Movie Inspector" you will see that the codec of the Zi6 files is listed as "Ambarella AVC encoder." They are NOT listed as H.264. This may be significant. It may be a flavor of H.264 but seems kind of "windows low budget" to me.
Also as a point of clarity, in my experience Final Cut Pro WILL edit H.264 files with no problem. It is not ideal for quality reasons but it works fine.

Vim "No tags file" error with python

I'm trying to get vim set up for python IDE stuff, but when I ctrl+] on a method or anything else, I get a "No tags file" error. I have the TagList plugin installed. Is there anything else I need to do to set this up?

You need the "tag file" before you to use "ctrl +]".
To get the tag file run this command "ctags -R *" in your source files' directory.

Using a lookup from one CSV file to another CSV file errors with a name clash

Hi
I have a master CSV file created by querying the AD. I need to populate the "Team" attribute by doing a lookup using Name against the Name Column any of 6 CSVs, someone has prepared for me . The problem is the data is inconsistent
in the 6 CSV files so Name can hold either the Name or Username i.e. SAmAccountName or LoginName
Now my ps script works when the data is good. but I have around 30 exception cases whereby there is a mismatch . To explain:
is in this line ( see the big code block below)
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterUserName}
The $_.Name is using the top level masterCSVData Name but I was hoping that it was using the
$nameAndTeamCSVData.Name as in only within the scope of the Where-Object {} ..I guess I have misunderstood the syntax of what I had written.
. A quick a dirty fix would be rename this column in all of the 4 spreadsheets or trying to fix the code.....
# now update the empty team value for user object
$csvMasterData | ForEach-Object `
$masterName = $_.Name
$masterUserName = $_.Username # to deal with exception cases
#force scope to as the properties in the outer with the same name should be out of scope
# lookup the Name to see if we can extract the user's Team
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterName }
# deal with the situation where the name in the businesses spreadsheets is actually the Username (login name) in the master csv
if ( $userObject -eq $null )
# lookup the username (loginname) to see if we can extract the user's Team # !!!!error occurs here with the $_.Name !!!!!
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterUserName}
if ( $userObject -eq $null )
$_.Team = "UNKNOWN"
else
# replace the mastercsv.Team with the one we have looked up
$_.Team = $userObject.Team
else
# Name matches so replace the mastercsv.Team with the one we have looked up
$_.Team = $userObject.Team
Daniel

I see your challenge. How about collecting the column names in an array and looking for the potential names? Following my example before, try this:
$dataColumns = $I | Get-Member -MemberType NoteProperty | Select-Object -ExpandProperty Name
Now, you can loop through the names and collect the appropriate data.
if ($dataColumns.Contains('Column1'))
#add ForEach-Object { $_.Column1... }
HTH
~fr3dd
Hi I had to wait until Friday as I have someone ( my boss) checking the business & team csv files against valid usernames and names.
# now update the empty team value for user object
$nameAndTeamCsvData | ForEach-Object `
$nt_name = $_.Name
# $masterUserName = $_.Username # to deal with exception cases
# lookup the Name to see if we can extract the username and mobile from the masterCSV
$userObject = $null # Replace my original code: $csvMasterData | Where-Object {$_.SName -eq $nt_name } # with foreach code below
$uo = $null
foreach ($uo in $csvMasterData)
if ($uo.SName -eq $nt_name)
$userObject = $uo
# ouch can't break out of this even though I found it so have to move on to the next
}if ( $userObject -ne $null ){ # Name matches so replace the few propeerties in mastercsv.Team with the ones we have looked up
$_.Username =$userObject.SamAccountName
$_.Mobile =$userObject.Mobile
This does work but is clearly not very efficient since I don't think I can
break or exit out of the foreach loop. I am thinking I could quickly modify and add your code - my import is delayed as I am having a new property added to user class... Let me know what you think.

Error with SAPDFACT during import. (BW System Export / Import)

Hi,
I'm performing an import into an Oracle DB using an export from an Oracle DB of a BW system.
I'm getting the following errors from SAPDFACT, it proceeds if I "ign" the indexes of the affected tables but there are 100s of indexes, must I do this for all?
L:\usr\sap\EAD\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.log -stop_on_error -k 1Wegd5M50Dp01eqtd1M80Ae2
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "EAD20090719090758                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "MYBWESSDEV02                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "MYBWESSDEV02"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 33 Step 2)"
DbSl Trace: Error 2158 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-2158 occurred when executing SQL statement (parse error offset=244)
(DB) ERROR: DDL statement failed
(   CREATE            INDEX "/BI0/E0FIAA_C13~P" ON "/BI0/E0FIAA_C13"        ("KEY_0FIAA_C13P",         "KEY_0FIAA_C13T",         "KEY_0FIAA_C13U",         "KEY_0FIAA_C132")        PCTFREE 10        INITRANS 002        TABLESPACE         STORAGE (INITIAL     0000000016 K                 NEXT        0000000016 K                 MINEXTENTS 0000000001                 MAXEXTENTS UNLIMITED                 PCTINCREASE 0000                 FREELISTS   001) )
DbSlExecute: rc = 99
(SQL error 2158)
error message returned by DbSl:
ORA-02158: invalid CREATE INDEX option
(DB) INFO: disconnected from DB
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: job finished with 1 error(s)
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: END OF LOG: 20090720171142
Any help is greatly appreciated.
Thanks!
- Ahmad M.

Hi Eric,
I updated the R3load binary but I'm still facing the same issue. I also tested OPS$ as per previous suggestions but I'm still facing problems with SAPDFACT.
Extract of the log
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Jul 5 2009 21:29:44
L:\usr\sap\EAD\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.log -stop_on_error -k 1Wegd5M50Dp01eqtd1M80Ae2
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "EAD20090720060750                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "MYBWESSDEV02                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "MYBWESSDEV02"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 33 Step 2)"
DbSl Trace: Error 2158 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-2158 occurred when executing SQL statement (parse error offset=174)
(DB) ERROR: DDL statement failed
(   CREATE BITMAP            INDEX "/BI0/E0FIAA_C11~01" ON "/BI0/E0FIAA_C11"        ("KEY_0FIAA_C11P")        PCTFREE 10        INITRANS 002        TABLESPACE         STORAGE (INITIAL     0000000016 K                 NEXT        0000000016 K                 MINEXTENTS 0000000001                 MAXEXTENTS UNLIMITED                 PCTINCREASE 0000                 FREELISTS   001) )
DbSlExecute: rc = 99
(SQL error 2158)
error message returned by DbSl:
ORA-02158: invalid CREATE INDEX option
(DB) INFO: disconnected from DB
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: job finished with 1 error(s)
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: END OF LOG: 20090721001150
Tried to search for SAP Notes related to this error but no luck so far.
Can any one advise if I could "ign" all the indexes in the TSK file then later on use the BW indexes repair program to fix the missing indexes?
Any help is greatly appreciated.
- Ahmad M.

XSD's file error with impot

Hi, I'm getting this error in set_user_details_request.xsd
How can I impotr this file with best way?
I'm not sure about http://www.test.com
user_details.xsd :
==============
<?xml version="1.0" encoding="utf-8"?>

<xs:schema xmlns:tns="http://www.test.com/User/user_details" targetNamespace="http://www.test.com/User/user_details" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="details">
    <xs:sequence>
      <xs:element name="id" type="xs:int">
        <xs:annotation>
          <xs:documentation> The user id. </xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="first_name" type="xs:string">
        <xs:annotation>
          <xs:documentation> The user first name. </xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="last_name" type="xs:string">
        <xs:annotation>
          <xs:documentation> The user last name. </xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="birthday" type="xs:dateTime">
        <xs:annotation>
          <xs:documentation> The user birthday. </xs:documentation>
        </xs:annotation>
      </xs:element>
    </xs:sequence>
</xs:complexType>
</xs:schema> set_user_details_request.xsd :
========================
<?xml version="1.0" encoding="utf-8" ?>

<xs:schema xmlns:dtls="http://www.test.com/User/user_details" xmlns="http://www.test.com/User/set_user_details_request&...
targetNamespace="http://www.test.com/User/set_user_details_request&... xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import schemaLocation="./user_details.xsd" namespace="http://www.test.com/User/user_details" />
<xs:element name="set_user_details_request">
    <xs:complexType>
      <xs:sequence>
        <xs:element minOccurs="0" maxOccurs="unbounded" name="user_details" type="dtls:user_details" />
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema> Error:
====
the <element> [user_details], is of type [http://www.test.com/User/user_details:user_details...
However [http://www.test.com/User/user_details:user_details... is not defined as a root item
(either a <complexType>, <simpleType> or <element>, within this schema or eny included or imported schemas. My files in:
D:\TestWorkspace\testAARs\User
Thank's,
Yael.

Well, let me first say that I'm not much good at schemas. But to me it looks like that message is saying that you have a <user_details> element, and your schema doesn't describe any such element. And I don't see why you think it does, either. I don't see where your schema describes a <user_details> element.

Error with some software updates

A few weeks ago when "AirPortTi2005-001" was released via software update, I tried to install, however I get an error when I try to install it. Other software updates installed fine, up until today when J2SE50Release2 was released and I am having the same problems with it.
To cure the problem I have
Restarted
Repaired Permissions
Ran OnyX Automation
Downloaded the actual files from apple.com/support/downloads
Nothing. Anyone know what I can do and anyone else having this issue? It is only these two software updates, ones released at the same time or in between the two releases have installed fine.

A few weeks ago when "AirPortTi2005-001" was released via software update, I tried to install, however I get an error when I try to install it. Other software updates installed fine, up until today when J2SE50Release2 was released and I am having the same problems with it.
To cure the problem I have
Restarted
Repaired Permissions
Ran OnyX Automation
Downloaded the actual files from apple.com/support/downloads
Nothing. Anyone know what I can do and anyone else having this issue? It is only these two software updates, ones released at the same time or in between the two releases have installed fine.

"Unreadable Files" error r/c when importing JPG

My computer was recently serviced and now iPhoto "doesn't recognize" my HD photo card filled with JPG files (photos). My camera settings haven't changed, and I've never had this problem before.
HOWEVER, my daughter's same laptop imports them without error. I suppose I need to change some setting beyond my capabilities.
Can anyone please offer some help?
Thanks, in advance!

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Other than that, have you considered returning to where it was "serviced" and getting them to "service it better"?
Regards
TD

Size error with the "Software Projects" example

Hi All,
I have tried to download some examples from http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html - eg. "Software Projects" applications.
The file "sw_projects_0.93.zip" was downloaded but when I have tried to run the initial script "sw_projects_installer_0.93.sql" there is the following error displayed:
"The script exceeds the maximum size allowed."
The script has 2222 kB and it looks it is not possible to install. Does anyone have a solution?
Thanks,
AB

Hello,
Have your APEX administrator increase the size of the "SQL Scripts Maximum Script Size in bytes" setting in the APEX instance, they can do this by logging into the Instance as an Administrator and navigating to -
Home -> Manage Service -> Feature Configuration
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

Windows bad image in Vista playing wmv file error with Acro8professional

I have created a multimedia file with movieclips and audio. The file plays perfectly on XP2 and XP3 machines. However I have one Vista machine which reports a bad image error when clicking the play button for the movie. This error will display after three attempts after which the file will play without problem. The file embedded in Acrobat 8 is a WMV file.
The error message is as follows: Exception processing image
0xc000007b parameters 0x75AD023C 0x75AD023C 0x75AD023C 0x75AD023C
The vista laptop is the one we use to demo files so it would be great to establish what the problem is. Do not have access to another vista machine to compare.
Many thanks

i had a similar issue. don't know what was the reason but the latest update fixed it.

File error with Calibrated Software import

Similar Messages

Maybe you are looking for