File Error: Wrong type

Hi,
I have been archiving some old finished videos (as self-contained QTs) on a server that is PC based. I have a feeling that this may be a problem. I'm right, right?
On a related note, I now have some QTs that will not open, with error messages like
'File Error: Wrong type.' (FCP)
and
'Error opening movie
The movie could not be opened.' (QT)
The fun part is that I cannot remember exactly which had been moved over there (I had a couple LaCies die on me and in a rush transfered a bunch of stuff back and forth trying to stay ahead of the crash), but now they're back on Mac based externals. But won't open.
Any advice is tremendously appreciated.
Thanks,
Ariel.
Dual 1.8 GHz PowerPC G5 Mac OS X (10.3.9) 1 LaCie Big Disk Extreme, 1 Maxtor 500Gb, FCPHD 4.5, QT Pro 7.1.3

Okay, thanks for the help. I'm pretty swamped right now, but by next Monday I will have gone through all of them. I will post back then with any info that may be of interest.
So, for the future, I should either stay away from non Mac OS formatted drives for my media, or zip them before sending them over. (by control clicking and archiving)
(sigh) Thanks, guys. I'm still just trying to figure out the cheapest, quickest way to archive my old stuff. I guess tape is the best way to go.
- Ariel.

Similar Messages

Receiving an export file error: wrong type

I have created a movie several times in FCP and then exported the movie to QT without any problems. Now all of a sudden, I can't get the movie to export correctly. After the 2 hour export, I'll check on FCP to find that the program has shut down without an "Unexpected Shut Down" message. I check for the exported movie which I find in the saved folder. I click to open and verify the completed job, but find that I get an error instead : "Error: Wrong Type".
The last successful movie I created was September 14th, prior to the QT 7.5.5 upgrade. I thought it was the upgrade, as I found out that FCP does not do well with the new QT version, so I reverted to QT 7.5, but I am still experiencing the same problem with FCP quitting and the movie not being able to read.
What is going on? Can anyone help?

Francois:
This is a crazy solution, but this happened to me last week and this solution enabled me to open my files again -- they were all greyed out and I thought I'd lost them. I took my drive in to an Apple Store Genius Bar without resolution and spend 2 hours online with ProApps (FCE/FCP) tech support, also with no resolution.
This fix is based on the fact that FCP when it is started, it automatically opens the project that was open when it was closed. First, in FCP save the current project (this can be any project -- I created a placeholder project -- to a dummy name -- I used "save me". Close FCP and delete the dummy name ("save me") project. Now rename the project that is greyed out and provides the File Error: Wrong Type message that you would like to open to the dummy name, so that it's now called "save me". Now open FCP again. Now save the recuperated file using the original name.
Maarten
Here's what you do.

FCP Files Will Not Open (File Error: Wrong Type)

I have put together a few pieces using FCP and then unfortunately my LaCie HD got wiped. I was however able to recover all of my files (thank God) but when I go to open any previous FCP files, I get the error message "File Error: Wrong Type" once FCP is opened. I am wondering if there is any way to open these files somehow so I don't lose my work. Thank you.

If they'll open in QuickTime, you could re export them, and thus rebuild them that way.
Otherwise... recapture them. I'm not sure they couldn't be fixed, but more than likely the recovery process messed up the resource forks of these files. Might search in the QuickTime forum here for a fix for that??
Jerry

File Error: wrong type can't open media file

After capturing my film using Final Cut Pro,"Capture Now" I can't open the film file. It seems the film was caputured onto my Mac notebook in a file format Final Cut Pro doesn't recognize or can't open. When I try to open the file the following error message pops up: "File Error: Wrong Type".
It seems the format of this media file is AV or avi (the name of the media file is "Untitled - AV". It's not a .fcp file.
I tried to open it with Quicktime or other programs, but without success, no program can open it.
I appreciate your help!

I followed the instructions in the article AppleCare Technical Support emailed: http://docs.info.apple.com/article.html?artnum=302337 . It helped to delete the User Preferences and to remove receipts and to reinstall the entire Final Cut Pro Studio software. I think what really helped was to update the latest software versions (Final Cut Pro 5.1.4).
Thank you very much!
John Well-Off-Man

FCP File Error: Wrong Type

A EXT HD w/ 1TB worth of FCP Projects and it's media died on me. (no, none of it was backed up, please save me the lecture!)
Anyway, we sent it to one of the Drive Recovery places and they were able to retrieve about 95% of the files.
When I got back the new drive w/ the rescued files It seemed like it was all there until I tried to open one of the .fcp files and encountered this:
FCP File Error: Wrong Type
I checked the file's info to see if it was associated w/ FCP. It was...
I checked the Capture Scratch files and found that all of the Quicktimes did not have their ".mov" extensions. I added ".mov" after one of them and it opened successfully in the Quicktime Player. I tried moving this same file to FCP and encountered this:
File Error: Unknown File
As an experiment I took the same quicktime (which BTW is an HDV 1080i60 Quicktime) and dropped it into Compressor. I converted it to the same setting (HDV 1080i60) After the conversion I was able to pop it into FCP normally.
So what do you guys think? Is there anyway I can get these .fcp files to open? Am I totally screwed?
Thanks,
-B

Yes, a .fcp extension means it's a FCP project file. I'm not dragging/importing .fcp's into FCP, just trying to open them normally w/ no luck. It's the QT's I've been dragging/importing into FCP.
I've tried a few Resource Editors to change the way the .fcp project files are handled/read w/ no luck
Well, at least my QT's are intact...
-B

File Error: Wrong Type with MPEG-4 Audio File

Help! I am trying to import an MPEG-4 Audio File into Final Cut Express2 but I keep getting a 'File Error: Wrong Type' message. Is there anything I can do to solve this problem. I really need this song for my video. PQu

iTunes - check your iTunes preferences:
Preferences > Importing -
- select Import Using AIFF encoding
- select Custom
- select Sample Rate 48.000 kHz
- select Sample Size 16 bit
- select Channels stereo
Then import your MP4 into iTunes
Then control-click on the track name in iTunes, select Show Song File, which will open a Finder window from which you can copy your AIFF file to any location you want it.

Message: File Error, wrong type

I have some folders listed on my scratch disc when I look in Finder. They say things like Waveform Cache file, autosave vault, audio render files. Inside there are files relating to a project I have completed. If I try to open them I get the message "File Error, wrong type".
It seems to me that it's OK to trash these as I cannot do anything with them. Before doing that I wanted to just check with the experts: is it OK to remove them please? Thanks for the advice.
Keith

If you're done with the project, it's ok to trash everything. If you plan to return to the project, you can delete everything except the actual project file and any media files associated with it.

Unable to Open File / File Error-Wrong Type / This is not a Movie File

I used TechTools to volume optimize my Lacie external hard drive. After the hard drive had been successfully completed - I am no longer able to open any of the files on the external hard drive. I get these error codes when I try to open FCP files, Quicktime FIles and word documents. Some how Tech Tools optimization has caused these files to be unreadable. Does anybody know how to fix this? There is NO backup for the Lacie hard drive.
HELP!!

You may be out of luck. My understanding is that there is no need to optimize mac drives in osx.
Digital Rebellion has a QT repair tool that's part of it's Pro Maintenance Tools
http://www.digitalrebellion.com/promaintenance/
There's a free trial and it's worth a shot.
If you want to send me a small file, I'll see if there's anything else obvious that I can suggest.
My email is [email protected]

File Error: Wrong File Type for Project File

Just had our 2nd LaCie 2tb hard drive crash. Just completed a project and was about ready to compress it when the drive wouldnt boot up anymore. I tried every program under the sun before eventually sending it off for data recovery.
$1700 dollars later I have all my files, except one little change.
My FCP project files are not recognizable by FCP anymore. In the get info box it says they are "Kind: Final Cut Pro Document" The preview picture is a gradient box with exec in the green text in the upper left corner. I tried adding the .fcp extension, but it still wouldn't open it. I keep getting the "File Error: Wrong File Type" when I try opening it with FCP.
Anything I can do to fix this?
Thanks

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

File error: wrong file type

So my friend dropped my MacBook Pro the other day and broke my hard drive. Most of the data (well, 300 out of 500G) was recovered, but all I *really* cared about was the FEATURE LENGTH FILM I'd spent the last 4 months editing. And of course it was too big to fit on my external hard drive and I'm too broke to buy a new one, so if I can't get it open from the recovered data I'm going to have to re-edit the thing.
The file itself did seem to survive the data recovery process, but when I open the file, it gives me an error: "File error: wrong file type." I've played around with the extensions- first saving the extensionless file as a .fce (this is actually FCE, not FCP, but I thought people might have better answers in this forum), which didn't work, then tried saving it as a .txt, then resaving as .fce, which also didn't work. No matter what I do, it's still giving me the "wrong file type" error.
Is my data probably just corrupted and I'm screwed? Or is there anything else I can try to recover the project? Most of my source files seem to have survived (although they all lost their .mov extension), but the Final Cut file itself just won't open.
Any help would be appreciated! Thanks!
Amy

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

FCP project - wrong type error

I have a major problem..
my disk crashed and fortunately I was able to recover all data.. BUT
when I try to open any FCP projects it would not open just reply with *File error: Wrong type*
when I try to open it from FCP it would not even hi-light the files for possible selection..
please save my a..

Search is your friend:
http://discussions.apple.com/thread.jspa?threadID=1129775&tstart=15

Wrong type of file error message PSE 7

Error message in PSE & when I try to open images I saved. Wrong type of file, cannot be opened. Tried to remove the read-only in properties but still cannot open .jpg images. Can anyone help? Photo attached.

I do not see any attachment.
-garry

When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
Also what is the version of ACR in the title bar?
Gene
Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

Trying to upload elements 13. getting error message "wrong type of file"

After downloading the new Elements 13, I try to run it and it tries to open in Elements 11. I get an error message that it can't open because it is the wrong type of file. I using window 8.1 (64-bit). Has anyone had a similar problem? How can I resolve the issue?

Jeff,
When I purchased my Dell laptop a year ago it came loaded with Adobe Photoshop Premiere Elements 11 with photo editor and video editor. Since I really have only begun to learn to use the programs, and since I kept getting a message to upgrade now!, I decided to upgrade and learn to use edition 13 from the get-go. What I ordered was Photoshop Elements 13..order nbr AD014688152.
What is happening is that it downloads okay but when it tries to open in Elements 11 I get the error message that it can't load, wrong type of file.
My computer op system is Microsoft Windows 8.1 (64-bit). I know I downloaded the 64-bit and not 32-bit.
Perhaps I ordered the wrong upgrade?
I appreciate your help . Let me know if you need additional info.
Fred Hoerauf
Sent from my iPad

VerifyError: Error #1033 Cpool entry 1 is wrong type - Java Server

Hello, there!
I need some help if someone else has already face this problem.
I have a Java server that process the bytes of a SWF File stored in the server and ouptut it to the user through a Servlet. The file was decompressed and re-compressed using the java.util.zip package.
Everything works fine on Windows Server 2008 server. But now we need migrate the server to Linux. The problem is that when I test the website now, the Flash Player throws this error: VerifyError: Error #1033 Cpool entry 1 is wrong type.
Nothing has changed on client side, not even on the SWF.
The documentation is too generic/vague about this error, only saying that this means that the SWF is corrupted. But everything runs normal on Windows Server configuration, when changed to Linux, this messages appears... what could possible be the cause?
My Windows Server is:
     . Windows Server 2008 (6.0 - x86)
     . Apache 2.2.11
     . Tomcat 6.0.16.0
     . Java JDK 1.6.0_12-b04
My CentOS Server is
     . CentOS 5.4 (2.6.18-164.15.1.el5 - i386)
     . Apache 2.2.3
     . Tomcat 6.0.16.0
     . Java JDK 1.6.0_12-b04
Please, if someone could give me a lead, I would appreciate very much!
Thank you all in advance,
CaioToOn!

Thank you, Taylor!
You were right! The problem isn't about Flash.
The problem was about encoding, with the clue of Neil Coffey I could figure out the problem. It can be checked here for anyone who interest.
Thank you again,
CaioToOn!

File Error: Wrong type

Similar Messages

Maybe you are looking for