File export from Ai 5.5 to PSD CS 5.5 - error message
I'm getting an error message of "not enough memory" when trying to export at either 300dpi & at 150dpi. Is there a work around??? I have 145 Gigs available.
This refers to working memory, not disk space. The rest we cannot know. You have not provided any useful technical information like system specs, artboard settings, screenshots and so on.
Mylenium
Similar Messages
-
This is the story. Up until two days ago, when I completed a video project in Final Cut Pro 10.0.9, I went to file->share->YouTube and a window opened up that showed the name of my YouTube account - (e.g., account.name) which is the same as the name of my gmail account. I then clicked 'next' and was asked for the password for that account. Upon supplying that and clicking next/publish, the uploading began.
Then suddenly, this procedure no longer worked. When I supplied the password, I got a message saying:
'NoLinkedYouTubeAccount'. Following online advice, I changed my account name from account.name to [email protected] and supplied the password. Still no good. I then changed the password in that account and tried both ways again. Still no good. I then opened up a new gmail account with a new password and tried that both ways. Still no good. I've tried following other online advice but nothing works. When I go to youTube, I see both accounts listed so they are there but the link doesn't get made. I've tried uploading several different videos, but it makes no difference. The videos I've uploaded previously to YouTube are there and functioning OK.
Help would be much appreciated!
- DavidWhen I asked about codecs I was thinking of conflicts that FCP might have with one that would have been installed from a third party vendor…
It would seem to be something at the system level since all the user-specific fixes appear to have had no effect. And you've already tried a comprehensive list of the suggestions that I would have thought of…and probably more.
You didn't mention available disk space but I assume you checked that as well and you have at least 15% free on your start-up and media drives.
Has any version of FCPX performed for you as expected in the past?
When you uninstalled the app, by any chance did you use FCS Remover? If you didn't, give it a try.
Russ -
Illustrator error opening eps file exported from sketchup pro 8
When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened". If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Any thoughts on why I'm having this issue? Is there an eps version compatibility issue I should be aware of?
Hi Mike. Here is the screenshot you requested.
-
Aspect ratio issues in iDVD with mov files exported from FCE
Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png! -
PAL files exported from FCP don't display
This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.Does the computer your using to view this video have Final Cut Pro installed?
-
Can't visualise text on PDF files exported from PS
PDF files exported from PS (levels included as we need them to be selectable) have corrupted text. When opening the saved pdf file, a part of text doesn't appear. It is usually starting from the second chapter of text. Any idea of how to solve this problem?
Hi Marco,
For now we have only fixed this in CC, but we are aware this problem also affects CS6 users and is a significant problem for many people. At this time, I don't know of any workaround in CS6 for this bug other than to break text up into smaller blocks or use another more text-oriented application like InDesign. While I can't comment on future releases, your feedback on this issue is important to us, and I can say, "there's always hope"...
If you'd like to discuss this further, or send us a file that exhibits the problem, please contact me directly. My email address is my last name @ adobe.com.
Paul -
How to import a *.dmp file (exported from 10g) to 8i database?
Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas. -
HOW-TO Distinguish between file exported from Datapump and normal export
How to distinguish between the dmp file export from the data pump utility and the export utility in Oracle 10g and 11g .
Thanks,
SSLike Werner suggested, it's never hurt to try anyway.
use imp with SHOW=Y, if it works then Original otherwise Data pump.
Once you determined one file, there's good chance that the rest are same. I don't think previous DBA will go through the trouble by mixing data pump and traditional exp/imp. -
How do i send an html file exported from muse as email blast with images and live links?
My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
NicoleUnfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.
-
Lightroom and DxO: fix lens flaws in a TIF file exported from LR
Hi,
I'm in love with LR, I don't mind if people tell me that other Raw converter do a better job in demosaicing. Anyway some time ago a friend told me about DxO Optics Pro, I tried and loved the lens corrections. I thought I could prform those correction at the end of my workflow on a Tiff file exported from LR to DxO. No way! It seems that DxO doesn't recognize the lens used to shoot the image. It seems that LR and Camera Raw delete all the infos related to optics used. Any help would be appreciated.
Bye!I used the following command to swap exif data:
exiftool -all= -tagsfromfile DSC_0002.NEF -exif:all DSC_0009-2.tif
The TIF file contais less exif tags than the NEF (or DNG) file, and there is no tag about the lens used.
Here's what I get copying exif data from one file to another:
ExifTool Version Number : 7.70
File Name : DSC_0002.NEF
Directory : .
File Size : 5.7 MB
File Modification Date/Time : 2009:02:25 13:44:44+01:00
File Type : NEF
MIME Type : image/x-raw
Exif Byte Order : Big-endian (Motorola, MM)
Make : NIKON CORPORATION
Camera Model Name : NIKON D70s
Software : Ver.1.00
Modify Date : 2009:02:25 13:44:42
Jpg From Raw Start : 131072
Jpg From Raw Length : 725092
Y Cb Cr Positioning : Co-sited
Subfile Type : Full-resolution Image
Image Width : 3040
Image Height : 2014
Bits Per Sample : 12
Compression : Nikon NEF Compressed
Photometric Interpretation : Color Filter Array
Strip Offsets : 856404
Orientation : Rotate 270 CW
Samples Per Pixel : 1
Rows Per Strip : 2014
Strip Byte Counts : 5095416
X Resolution : 300
Y Resolution : 300
Planar Configuration : Chunky
Resolution Unit : inches
CFA Repeat Pattern Dim : 2 2
CFA Pattern 2 : 2 1 1 0
Reference Black White : 0 255 0 255 0 255
Exposure Time : 1/50
F Number : 4.0
Exposure Program : Manual
Create Date : 2009:02:25 13:44:42
Exposure Compensation : 0
Max Aperture Value : 3.5
Metering Mode : Center-weighted average
Flash : No Flash
Focal Length : 18.0 mm
Maker Note Version : 2.10
ISO : 800
Quality : Raw
White Balance : Auto
Focus Mode : AF-S
Flash Setting : Normal
Flash Type :
White Balance Fine Tune : 0
Program Shift : 0
Exposure Difference : +1.8
Preview Image Start : 8112
Preview Image Length : 24932
Flash Exposure Compensation : 0
ISO Setting : 800
Flash Exposure Bracket Value : 0.0
Exposure Bracket Value : 0
Tone Comp : Normal
Lens Type : G
Lens : 18-70mm f/3.5-4.5
Flash Mode : Did Not Fire
AF Area Mode : Single Area
AF Point : Center
AF Points In Focus : Center
Shooting Mode : Single-Frame
Contrast Curve : (Binary data 4160 bytes, use -b option to extract)
Color Hue : Mode1a
Light Source : Natural
Hue Adjustment : 0
NEF Compression : Lossy (type 1)
Noise Reduction : Off
Linearization Table : (Binary data 1412 bytes, use -b option to extract)
WB RGBG Levels : 555 256 388 256
Lens Data Version : 0101
Exit Pupil Position : 102.4 mm
AF Aperture : 3.6
Focus Position : 0x01
Focus Distance : 3.98 m
Lens ID Number : 127
Lens F Stops : 5.33
Min Focal Length : 18.3 mm
Max Focal Length : 71.3 mm
Max Aperture At Min Focal : 3.6
Max Aperture At Max Focal : 4.5
MCU Version : 132
Effective Max Aperture : 3.6
Raw Image Center : 1520 1008
Sensor Pixel Size : 7.8 x 7.8 um
Serial Number : No= 3005d534
Shutter Count : 31244
Flash Info Version : 0100
Flash Model : (none)
External Flash Flags : (none)
Flash Commander Mode : Off
Flash Control Mode : Off
Flash Group A Control Mode : Off
Flash Group B Control Mode : Off
Flash Group A Exposure Comp : 0
Flash Group B Exposure Comp : 0
Image Optimization : Custom
Vari Program :
User Comment :
Sub Sec Time : 20
Sub Sec Time Original : 20
Sub Sec Time Digitized : 20
Sensing Method : One-chip color area
File Source : Digital Camera
Scene Type : Directly photographed
Custom Rendered : Normal
Exposure Mode : Manual
Digital Zoom Ratio : 1
Focal Length In 35mm Format : 27 mm
Scene Capture Type : Standard
Gain Control : Low gain up
Contrast : Normal
Saturation : Normal
Sharpness : Normal
Subject Distance Range : Unknown
Date/Time Original : 2009:02:25 13:44:42
TIFF-EP Standard ID : 1 0 0 0
Aperture : 4.0
Blue Balance : 1.515625
CFA Pattern : [Blue,Green][Green,Red]
Image Size : 3040x2014
Jpg From Raw : (Binary data 725092 bytes, use -b option to extract)
Lens ID : AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED
Lens : 18-70mm f/3.5-4.5 G
Preview Image : (Binary data 24932 bytes, use -b option to extract)
Red Balance : 2.167969
Scale Factor To 35 mm Equivalent: 1.5
Shutter Speed : 1/50
Create Date : 2009:02:25 13:44:42.20
Date/Time Original : 2009:02:25 13:44:42.20
Modify Date : 2009:02:25 13:44:42.20
Circle Of Confusion : 0.020 mm
Depth Of Field : 197.49 m (2.01 - 199.50)
Field Of View : 67.1 deg (5.28 m)
Focal Length : 18.0 mm (35 mm equivalent: 27.0 mm)
Hyperfocal Distance : 4.04 m
Light Value : 6.6 -
Why won't .MOV files export from Lightroom?
Why won't .MOV files export from Lightroom?
The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob. -
Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty
1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library. -
Color shift when converting .mov file exported from Macromedia Flash
I'm trying to convert quicktime file exported from Flash into any other format using Quicktime Pro 7.0.4 and I get substantial color shift. Here's the picture:
http://img525.imageshack.us/img525/1518/screen3ov.jpg
On the the left is the initial file, and on the right is what I get. I've tried all codecs setting (targa, jpeg2000, animation) but no luck. Please help!I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.
-
I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.
Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
*To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
*The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
*I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
Much Respect
Lammo -
when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanowHi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support
Maybe you are looking for
-
ITunes Truncate Track Ending, Unsolved in 2+ Years: My Letter to Steve Jobs
I have posted this problem twice in this forum. Twice they were answered with something totally irrelevant, and then marked "Solved" and deleted. Finally, I am going to mail the CD, and this letter to Steve Jobs, to let him know personally the bug, a
-
CS5.5 Premium Edition - Mavericks or Yosemite?
Re: Creative Suite CS5.5 Design Premium (Students and Teachers Edition). So after waiting for a while before considering to update to Yosemite and reading many forum posts here and other forums on the web saying how easy it was to update with no prob
-
I purchased a 13.3" MacBook Pro in February of 2010. About a month later, I began to notice that certain applications that don't require much, Safari, MSWord, iTunes, were causing the fans to kick in at crazy speeds and the base of the computer was t
-
Hi, Can any one explain please 1.Why we need to create XSD, 2.What is the use of dehydration, 3.Types in XML Please explain any error handling with example.
-
Ovi Browser Beta App. Error
i cant open my app in my phone. when i try to open it write app. error and when i enter the detail section it writes "error java/lang/error static initializer:java/lang/NullPointerException". what should i do? phone:5310 xpressmusic version: v10.10 2