File export problem

Dear All
I need to export data to a file share location in XL format. I have the data in an internal table. This file share is on another location(network directory).
I also wish to import it when needed.
How can I do it. Please guide me.
Regards
Vijai

Hi Vijai,
In order to save the data on to some file onthe Application server(Network directory),use the keywords Open Dataset,Transfer and Close Dataset in your report which would transfer the data from the internal table to the file on the Application server.
Once the file has the data in the file n the T-code AL11(Application server),use the T-code CG3Y to transfer the data from the Application server to the Presentation server in the Excel format.
Use the T-code CG3Z to transfer the data from the Presentation server to the Application server.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Similar Messages

Fce 3.5 unknown file-export problem

Hello!
I have a problem with exporting my finished movie. Everytime I try to export it as a .mov file. The following erros shows up
Unknown File
I just have .mov files as my video files form a digital camera and .aif files as my audio files and some text. I also tried to find out which is the UNKNOWN file therefore I tried to export just the audio or just the video. It didn't work. The same error.
Any Suggestions? I'm really confused
Thank you
Jens

Your camera creates QuickTime MJPEG videos at 640x480 or 320x240 pixels at either 30 or 10 fps. FCE is a DV / HCV application that uses either NTSC or PAL video standards. That is why FCE gives you the unknown file type error message.
Did you render your video in FCE before you tried to export it? If not, select all video clips in your timeline and do Sequence > Render All > Both, followed by Sequence > Render Only > Mixdown.
It would be better if you can convert your MJPEG video(s) to DV-PAL before you import them into FCE (I assume that's the correct choice for Germany; the other choice would be DV-NTSC but that is the North American standard.) I believe QuickTime Pro can do the conversion.

Lightroom 5.3 file export problems

Just upgraded to lightroom 5.3 and can no longer export photos. any clues?

A RAW file is a RAW file.
DNG is also a RAW format
Lightroom will not alter RAW fomat files on export, as in develop edits.
(it will record those edits in metadata if asked so another application capable of interpreting Lightroom edits can read and apply those edits - like ACR.)
DNG exports can be altered to various flavours of DNG but that does not include develop edits.
A colourspace can also be added as appropriate.
The other formats are derivative files and develop edits are baked in on export.
Tony Jay

File Export Renaming Problem

I want to export collections of files from Lightoom.
I want to rename the newely exported files, but I want to use the same file number suffix as the original file.
I also want to embed the oringal file name in the metadata of the newly exported file.
The problem is that, when I go into the File->Export dialog i.e. the "Filename Template Editor" the orginal "file number suffix" is not showing up in what would be the newly created filename. The orginal file number suffix does not appear to be part of the metadata.
The current filename on disk does however have the file number suffix as part of the name.
However it does not seem possible to extract part of the current file name (i.e. the number suffix) on export.
If I rename the files using a number sequence then adding or removing a file will change the sequence on subsequent exports of the collection.
(Not something I want to do, since it would then be difficult to keep track of the images used originate the exported file, if I updated the collection.)
Renaming all my original files is not a viable option since there are too many of them and different exported files may be in more than one collection.
*Any suggestions as to how to get the file naming I want for the exported files, i.e. "placename-oringal file number suffix"?
(Given the file number suffix is missing from the metadata)
*Also I would like to include the existing file name in the metadata of any new file name.
Any suggestions on how to automate this?

John said:
> Unless you check "minimize metadata", it should all be there.
No I have not checked this box.
> Second, if you rename your files just before you Export (and not in the Export dialog, but actually rename them by batch
> so the LR name is changed) you'll be able to link them up to the originals much more easily.
No this will not work. My naming method is quite useful for me, but not useful for potential buyers.
When I export collections I want to simplify the names.
> Third, the rename editor is pretty flexible.
Yes I know, usually it is sufficient, but in this case it does not do what I want.
> Finally, all the metadata is there, and searching is much easier via it rather than a complex naming convention
> (not that it's so complex, but getting there may be.
Not sure I completely agree here. My naming method works quite well for organising images and for processing and so on.
Now since I have collections spanning multiple directories and so that I want to export the files with a simplified filename.
I expected to be able to do this using the file name editing template.
The BreezeBrowser renamer is much more flexible than the Lightroom filename template editor, so I may end up using that.
However it will be messy and add a few extra steps. i.e. export to a new directory using the existing filename. Then use Breezebrowser to rename the files by extracting the "file number suffix" from the original filename and making sure there is sufficient information in the new filename to create a one-to-one mapping. Then upload the new files to the website.
I stil don't see how to get the original file name into the metadate of the new filename though?l
Really I should be able to do all this in Lightroom.

File Size & Export Problems

Hi, my name's Jorge and I have a couple of questions.
First, is I make machinima movies and my latest movie is 21:48 long. In order for it to be uploaded to a certain website, it needs to be under 200 MB's. I'd like the visual quality to at least be decent.
What is the best way to export my movie from FCE and have it under 200 MB's?
I'm pretty sure this can be done, because a while ago, someone else made a movie that was also 21 minutes long and the file size for her movie was only 131 MB's, and I can't seem to make mine less than 319.2 MB's.
This brings me to a problem I'm having. I've signed to be an official director at Machinima.com and they require the movies to be in wmv format. It also says that the movie files would be smaller sizes, so I figured that would help my file size problem.
So I tested it out, trying to export my movie from FCE at the wmv specs they required, but it only exports 30 seconds of the movie. (?) Why is this happening and what can I do to fix this?
Since I have signed on with Machinima.com, I need to be able to export my movies in this wmv format.
Any help would be SO GREATLY appreciated.
Jorge

So I tested it out, trying to export my movie from FCE at the wmv specs they required, but it only exports 30 seconds of the movie. (?) Why is this happening and what can I do to fix this?
The trial version of flip4mac only allows up to 30 seconds per export. You'll need to purchase one of the flip4mac plugins if you want to export a complete video.
http://www.telestream.net/flip4mac-wmv/overview.htm
-DH

Keywords in Master file and AP database-- Export Problem.

I believe that I have a conflict with keywords. I believe that I have "baked in" keywords by writing IPTC to the Master files and then added more keywords which I am guessing are in the Aperture database and not "baked in". When I then look at exported images using the XMP sidecar file with Adobe Bridge all of the keywords do not show up. I want to experiment with Lightroom and I want all of the keywords.
My process has been:
1. Add keywords to images from the keywords panel.
2. Write the IPTC metadata to the master files.
3. Add more keywords to the images from the keywords panel.
4. Export the images using the File/Export Masters/Create IPTC4XMP sidecare file.
5. Look at the exported images in other applications (Bridge and PhotoMechanic).
How can I export using XMP sidecar files and have ALL the keywords be exported???
DickB

Yes, this is a known problem; sqldev distinguishes between the Constraint and the Index although the former implies the latter...
Regards,
K.

File - Export from Preview, iPhoto etc does not work

Lately, normal operations from OSX-programs are not working as expected on my MacBook Air mid-2013 running OSX 10.8.5. I can reproduce in PreView and iPhoto that operations like File, Export and File, Duplicate do not work - there is just no response.
Upon opening console, I see the following error messages:
10/11/13 3:23:50.170 PM com.apple.security.pboxd[487]: CGSGetWindowTags: Invalid window 0xc8
10/11/13 3:23:50.170 PM com.apple.security.pboxd[487]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
10/11/13 3:23:58.950 PM com.apple.launchd[1]: (com.crashplan.engine[735]) Exited with code: 1
10/11/13 3:23:58.950 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:00.167 PM Preview[456]: RVS:__54-[NSRemoteSavePanel _runOrderingOperationWithContext:]_block_invoke_0319 : Timeout occured while waiting for the window
10/11/13 3:24:00.171 PM librariand[459]: [ERROR] [913.272s] com.apple. SRMessageTransport.c:498 SRConnectionCreateClient() timed out waiting for the server to post the started notification
10/11/13 3:24:00.171 PM librariand[459]: [ERROR] [913.272s] com.apple. framework_client.c:810 IPCEnableSyncing() failed to run server: -1
10/11/13 3:24:00.172 PM librariand[459]: [ERROR] [913.272s] com.apple. UBService.c:598 UBServiceEnableMobileDocuments() IPCEnableSyncing failed with error: The operation couldn’t be completed. (UBErrorDomain error 2.)
10/11/13 3:24:08.972 PM com.apple.launchd[1]: (com.crashplan.engine[736]) Exited with code: 1
10/11/13 3:24:08.972 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:18.996 PM com.apple.launchd[1]: (com.crashplan.engine[737]) Exited with code: 1
10/11/13 3:24:18.996 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:20.174 PM librariand[459]: [ERROR] [933.275s] com.apple. SRMessageTransport.c:498 SRConnectionCreateClient() timed out waiting for the server to post the started notification
10/11/13 3:24:20.175 PM librariand[459]: unable to enable mobile documents
10/11/13 3:24:20.175 PM librariand[459]: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Please help...

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

Error in file export when order of elements in build array changes

Hi everyone,
A while ago I wrote a vi file which does the following:
At first it initializes a camera and chooses a region of interest (ROI). Data out of the ROI will be discarded.
Then it raster scans a motor stage in x and y direction, in bidirectional mode (meaning that x alternates between scanning from left to right and right to left as y is inreased).
For each point of the scan, the spectrum is collected, which is then integrated in lambda to give an idea of the total intensity.
Then the intensity is plotted, along with the spectrum at each point.
The final results are exported in a text file.
The problem:
If I flip the order of the wires in the "build array" before the file export, placing the Total Count (intensity) wire in place of the Spectrum wire, the file export fails. What I mean by "fails" is that the .txt file contains characters that look like chinese!
Why is that?
I attach my .vi as well as two screenshots which demostrate the problem.
Solved!
Go to Solution.
Attachments:
correct.png ‏182 KB
Wrong.png ‏180 KB
1.7z ‏119 KB

mikeporter wrote:
Hey Jeff... The changes you recommend are all good (and necessary) but the thing I'm stuck on is that regardless of what happens to the floating point data, there's that built-in VI that changes it to string representations of the numbers. And as I understand it, that is where the problem is.
Mike...
PS: Coming to NI Week?
Not this year
What scared me was the sgls on a SLs with no wire branch to force a data copy which, would force LabVIEW to preserve the sgls since the SL might need to be used again then, they get all mixed up building arrary out of mixed coerced sgls and dbls. With the potential of a miss-reussed buffer (not uncommon in 2011) confusing the string operations in the write to spreadsheet. The problem of course, must exist outside of write to spreadsheet file since it only exhibits with a build array element order change. Or, we all are halucinating (Possible alternate theory)
Jeff

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

Premier Pro CC and Media Encoder crashing on long file export.

Please forgive the length of this inquiry. But it is complicated and has a lot of variables.
I have an hour long mixed format timeline both Red 3K footage and Black Magic ProRes 1080P footage that I want to make a DVD from and it takes forever and crashes half way through. I have tried doing it every way possible and the only way I was able to get even a partial export was using the "MPEG 2 DVD" export option in Premier CC. It goes fast at first telling me it will take about 2 hours but even though it starts quickly doing about 15 fps it slows down to less than 1 fps and finally just stops and crashes my Cuda Core enabled Macbook Pro Laptop.
I really don't know who to ask about this since there are so many different variables. I never had a problem like this on my MBP with PP6 on a 4K timeline exporting to DVD or Blue Ray or to H-264 or Even Prores. But I wasn't mixing formats either. But on this project the first 20-30 minutes of footage goes through fine in a couple of hours but something seems to be bogging down the system on longer projects. My work around was to break the project up into multiple exports and combining them on the DVD timeline but I can't do this on every project. I thought maybe it was a corrupted clip somewhere in the timeline but when I broke the timeline up into several parts I had no problems.
I did notice a dramatic variance in the time it took to export footage based on the sequence settings. A one minute timeline comprised Red 3K footage and ProRes 1080P footage Here are some sample export results:
From a Red raw 3K timeline 2880x1620 with 1080P Prores footage upscaled 150%)
to .m2v Mpeg 2 720x480 format    1:48 Minutes ***
to .mov Prores 422HQ 1080P                         22 Minutes
to .mov H.264 1080P                    22 Minutes
to .m2v Mpeg 2 1080P                                                22 Minutes
From a 1080P timeline Prores footage at 100% (Red footage downscaled to 67%)
to .m2v Mpeg 2 720x480 format                         13 Minutes
to .mov Prores 422HQ 1080P                             13 Minutes
to .mov H.264 1080P                                                             14 Minutes
to .m2v Mpeg 2 1080P                                                            14 Minutes
Since I am going to DVD, I chose the fastest option Red to m2v Mpeg 2 720x480 format which only took 1:48 per minute. Why? I have no idea. Maybe someone here knows the answer. But again these numbers are for a ONE MINUTE clip when I tried to convert the whole hour timeline to the 720x480.m2v DVD File the Red timeline froze my computer after several hours even though I had set sleep mode to “Never” and turned the display off manually and I had to convert it in multiple chunks. In 20-30 minute chunks it did go fast about 1:48 per minute like the test indicated. But I would like to be able to convert the whole hour and not to have to try to stitch the clips together in my DVD authoring program.
I don’t want to have to avoid using multiple formats on the same timeline or waste time transcoding everything to the same format.
Can anyone give me any suggestions as to why the computer is crashing or bogging down in long exports and what timeline settings I should be using?
I have plenty of room on my Scratch Disk and 8 Gig of RAM and according to my Activity Monitor during the export process have about 800 Meg of System Memory during export but the CPU Usage is 98% and in my Activity Monitor I see under “Process Name” ImporterRedServer flashing up at the top of the list about every second during export.
Why .720x480 mpeg DVD setting is so much faster than all the other export codecs?
And if there are any other settings I can use to get higher speed exports in HD? 14x1 seems a little slow especially since every time it crashes I have to start over.

Hi,
Since a long time I did not encounter the crash of Media encoder with
long file export.
But I take care of a lot of details before the export :
- clean up Media cache and Media Cache Files within PP CS6 and/or CC,
- delete all render files with Preview Files,
- rendering of sequences until the rendering is completed,
- PP CS6 and/or Pp CC opened during export to AME and/or Encore CS6,
I guessed to leave Adobe but this company remains the last with a
serious authoring software (Encore CS 6).
I tested :
- Avid Media Composer, Final Cut Pro X, both are very good software but
no really authoring software for these video editing softs.
Th only way is to "flood" Adobe with "bug reports" and "wish forms"
which are not very easy to use.
And also to call the Adobe support day by day until they send they
escalate the bug.
Le 16/05/2014 16:51, alainmaiki a écrit :
>
      Premier Pro CC and Media Encoder crashing on long file export.
created by alainmaiki <https://forums.adobe.com/people/alainmaiki> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6384665#6384665>

Incorrect images from .indb file export to ePub in Indesign CS6

I am having problems exporting images to ePub and get a different result from the same file depending on whether I export directly from the .indd file or from the .indb file.
When I export to ePub from the individual chapter (.indd) file, everything is fine and the images appear in the correct locations where they have been anchored.
When I export via the book (.indb) file, images are being replaced with the incorrect file in the resulting ePub.
Looking at the HTML, it seems not all images are being exported from the .indb file and when the image is missing, Indesign is substituting the next available image from the alphabetical list in the images folder so I'm getting incorrect images peppered throughout the book.
Any idea where I've gone wrong and how to fix it? I've produced several ePubs with images and never come across this before.
More details on how I've set up the files and any other info I think might be relevant below if needed.
- I'm using Indesign CS6 (8.0.1)
- I'm producing an 11 chapter book.
- Each chapter is a separate .indd file for ease of editing.
- These 11 files have been added to an .indb file for export to ePub.
- Images are all anchored to their captions within the text.
- On Export to ePub settings for images I have selected to insert a page break before the image and that settings apply to anchopred objects.
Nothing else is selected (I don't want to preserve appearance from layout.)
- I'm using the Articles panel feature for order of content.
- In the original file supplied, the images were placed as .tiff images. I saved them to jpeg and relinked them using the "relink to folder" and "match same file but this extension" options.
- No links are flagged as missing.
Any help much appreciated.

The solution points to how, it appears, the book panel export is functioning: each file exports a set of tags referenced to itself; file01 adds a "1" to its tags, and so forth. What I was able to do was use a file referencing all of the tags in the style suite in two ways:
first, I exported to an epub the single file, creating a fairly clean CSS, which I then extracted and renamed;
then, making certain that file was the "source" file in the book panel, I mapped for export all of the tags, being careful to be certain each tag/class combo was same as in renamed clean CSS;
I synchronized the whole shebang;
I exported to epub, adding my clean CSS as an external style sheet, selecting only "include embeddable fonts".
Bingo!

Export Problem in LR 3.5

Hi folks,
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.
The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
Anybody any ideas to help me out?
Thanks and grts
Nil

@ web-weaver:
Of course they go to a different folder and they also get different
titels/names once processed in LR. The originals are always RAW (NEF) and I
export them as jpg or tiff files depending on what more I will do to them.
@ ssprengel:
I get the message when I have renamed the file in the export window, set
the folder it has to go to and hit export.
In the 2.7 version I got it already when I tried to import.
As I said, this only happens with the Nikon (NEF) RAW files. With the
Olympus (ORF) RAW files I have no problem at all and had no problem in LR
2.7 either.
I cannot see anything wrong in the Export panel nor in Preferences.
Plug in is Metadata Wrangler and has been updated to the latest version >
no joy...
I tried import/export with jpg files and no problem there.
Yesss! Got it! What I had overlooked was a question mark next to the folder
in Library (sooo small). A rightclick and telling LR where it was solved
the problem. Strange, though, as it has never done this before... the main
folder and the path are still the same as the ones that work perfectly with
Olympus exports... just a different subfolder named Nikon and another named
Test... Also strange that if I started off with jpg, it was no problem
either...
Anyway, thanks a lot for shaking my senses for me
Nil
2011/12/10 web-weaver <[email protected]>
Re: Export Problem in LR 3.5 created by web-weaver<http://forums.adobe.com/people/web-weaver>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

PDF export problem

Pages 09 - Lion - MBP
I used Pages to create a book of 180 pages with some images.
All the images (jpg) inside the text are with the cool apple tools like shadows and so on.
Everithing is perfect and nice. I exported to pdf and again everything seems to be perfect with preview.
With my great surprise this pdf file (portable document format) is not the same if viewed in others PC or also other MAC without Pages!
All the shadows and things like this are very bad or disappeared. That is really absurd! Is the PDF created with pages a NON standard PDF??
After several attempts I find out a complicated workaround:
pages --> export to postcript
use acrobat distiller on a PC in order to transform the .ps file in a standard PDF . In this way everithing is perfect again but it seems to me really absurd and impossible that pages is not able to export in a pdf capable to work with all the "effects" that make pages so nice...
Is there any easy way to use pages and export a real pdf file without problem with the rest of the world?
Thank you for your help

> I was saying that iWork is not delivered as a professional tool and so it's not logical to hope to get it professional results.
The supported data structures in e-paper formats should capture (1) Unicode input and TrueType output settings for glyph runs, (2) ICC colourimetry input and ICC device profile output settings for colour worlds, and (3) W3 SGML/XML logical reading order for the output of the layout rendering order.
In other words, you find an e-paper document in abstract archival space by its character information (modified by language markup), open the e-paper document in a browser (e.g. Apple Safari, Apple Preview), and image the e-paper document by its colourimetry information.
There are any number of degrees of control over how the input of information and metainformation is mapped to image output, but if the input of information and metainformation is divorced from the image output, then the e-paper document is not accessible in abstract archival space.
The aim of ISO and ECMA standards for e-paper is to ensure the best possible embedding of the memory-based mapping between information, metainformation and image, moving from the input-creating software through the e-paper format to the output-consuming software.
Any and all applications in fact face the same sales situation: they are compelled to serve as channels for the same information and metainformation (in the encoding remits of the Unicode Consortium, the International Color Consortium, and the World Wide Web Consortium).
While the Consortia willing allow that an application may internally choose an information encoding other than the interchange encoding, the Consortia disallow that information is lost. For instance, this is stated in Unicode Specification version 1.0 of October 1991.
If as a user you work with system software in isolation from other software, nothing but the installed software is involved, then you can check if the system is conformant in the sense that it does not loose information, unless where loss of information is stated in documentation.
This is nothing to do with how products are named in marketing, but with how conformance to information processing interchange for computerised telecommunications is understood in industry specifications and international standards.
/hh

File -- Export in oracle apps forms- headings missing

We have a custom form for our custom billing processes. It lists all the draft invoices that are ready to be released along with multiple custom fields. We are using File -> Export to export the data to excel file.
once exported, the some of the column headings are missing in the excel file. can someone help?
Thanks!

Hi,
This problem is because of the field heading.
So You have done like this first creating a text item and the you will manually create a heading using Text correct.
Don't do that, delete that and go to the property palette and give the Item heading in the PROMPT and check now its will work.
Thanks & Regards
Srikkanth

File export problem

Similar Messages

Maybe you are looking for